Searcharxiv⌕ Search

arXiv subjects

Kunihiko Shizume

Publications and source records attributed to Kunihiko Shizume.

3 recordsLinked to original sources

Tracking gas-solid hydration kinetics by non-contact in situ transflection micro-FTIR spectroscopy

Gas--solid reaction kinetics is important in applications such as thermochemical heat storage (TCHS), but experimental evaluation remains a bottleneck in materials development. This study evaluates non-contact \textit{in situ} transflection micro-Fourier transform infrared (FTIR) spectroscopy for tracking hydration reactions between water vapor and inorganic solids. Powder layers of La$_2$(SO$_4$)$_3$, CaSO$_4$, and CaO, exhibiting different hydration mechanisms and kinetics, were deposited on an Au-coated glass substrate and exposed to humidified N$_2$. Evolution of water- and hydroxyl-related IR absorption band areas was compared with thermogravimetry (TG)-derived hydration numbers. The FTIR band-area profiles were broadly consistent with the TG-derived hydration trends, showing close agreement for La$_2$(SO$_4$)$_3$ and CaSO$_4$. For CaO, some differences were observed between the FTIR and TG results, possibly because CaO is sensitive to differences in gas-phase conditions, particularly the initial increase in humidity, between the two measurements. The spectra distinguished molecular-water uptake in La$_2$(SO$_4$)$_3$ and CaSO$_4$ from hydroxide formation in CaO. They also detected carbonate formation during CaO hydration. Thus, \textit{in situ} time-resolved FTIR separately monitored individual chemical reactions, whereas TG recorded only their combined effect on the sample mass. These results demonstrate the potential of transflection micro-FTIR for chemically selective monitoring of gas--solid reactions in small localized samples.

cond-mat.mtrl-sci↗

Scaling laws in machine learning on non-ideal experimental data enable inverse design of radiative-cooling coatings

Materials informatics increasingly targets multicomponent materials, yet experimental datasets inevitably contain non-ideal variations arising from imperfect uniformity and reproducibility in composition, coating formation, and measurement. Whether machine-learning prediction accuracy scales with amount of data under these conditions remains unclear. Here, we develop an automated platform that produced and optically characterized 11,520 radiative-cooling coatings spanning nine material and processing parameters. Forward and inverse neural networks, and a spectrum-conditioned diffusion model were trained on subsets of 10 to 10,000 samples. All models exhibited power-law scaling, with prediction errors decreasing with dataset size. Experimental inverse-design validation showed that larger datasets produced spectra closer to a broadband-emitter target. The diffusion model generated multiple candidate parameter sets, allowing selection among alternative solutions based on ease of fabrication, cost, and scalability. These results demonstrate predictable learning-curve scaling in non-ideal experimental data and provide a quantitative basis for estimating the benefit of additional experimental data, and thus the cost-effectiveness of materials-informatics.

cond-mat.mtrl-sci↗

Microstructural Control and Heat Transport Enhancement in Lanthanum Sulfate for Thermochemical Heat Storage

Enhancing heat transport within thermochemical heat storage (TCHS) materials is essential for improving their heat output. A common strategy is to combine salts with highly thermally conductive additives, such as carbon or metallic materials. However, such composites often exhibit interfacial instability and reduced gas permeability. In this work, we propose an alternative approach based on microstructural orientation control, aiming to create efficient heat-transport pathways without relying on conductive additives. $β$-La$_2$(SO$_4$)$_3$, which undergoes reversible hydration and dehydration below 250 $^\circ$C, was selected as a model TCHS material. Highly oriented rod-like La$_2$(SO$_4$)$_3\cdot$9H$_2$O crystals with centimeter-scale lengths were grown from solution, cut into plate-shaped specimens, and then dehydrated to $β$-La$_2$(SO$_4$)$_3$. Two types of specimens with different microstructural orientations, which form spontaneously during the dehydration of La$_2$(SO$_4$)$_3\cdot$9H$_2$O to $β$-La$_2$(SO$_4$)$_3$, were prepared. In the "cross-plane-gb" specimen, the aligned grain boundaries were predominantly oriented parallel to the through-thickness direction of the plate, whereas in the "in-plane-gb" specimen, they were predominantly oriented perpendicular to this direction. Laser flash analysis (LFA) of $β$-La$_2$(SO$_4$)$_3$ revealed a clear orientation dependence of heat transport: the apparent thermal diffusivity was approximately 0.24 mm$^2$/s for the cross-plane-gb specimens, in which the grain boundaries are aligned along the heat-flow direction during LFA, and it was approximately 0.15 mm$^2$/s for the in-plane-gb specimens. These findings demonstrate that controlling the microstructural orientation is a viable route for enhancing heat transport in TCHS materials, offering an additive-free design strategy.

cond-mat.mtrl-sci↗