arXiv subjects

Kurt Jacobs

Publications and source records attributed to Kurt Jacobs.

At least 109 records · Page 6Linked to original sources

arXiv2008

Locally Optimal Control of Quantum Systems with Strong Feedback

For quantum systems with high purity, we find all observables that, when continuously monitored, maximize the instantaneous reduction in the von Neumann entropy. This allows us to obtain all locally optimal feedback protocols with strong feedback, and explicit expressions for the best such protocols for systems of size N <= 4. We also show that for a qutrit the locally optimal protocol is the optimal protocol for a given range of control times, and derive an upper bound on all optimal protocols with strong feedback.

quant-ph↗

arXiv2008

Rapid Measurement of Quantum Systems using Feedback Control

We introduce a feedback control algorithm that increases the speed at which a measurement extracts information about a $d$-dimensional system by a factor that scales as $d^2$. Generalizing this algorithm, we apply it to a register of $n$ qubits and show an improvement O(n). We derive analytical bounds on the benefit provided by the feedback and perform simulations that confirm that this speedup is achieved.

quant-ph↗

arXiv2008

Conditions for the Quantum to Classical Transition: Trajectories vs. Phase Space Distributions

We contrast two sets of conditions that govern the transition in which classical dynamics emerges from the evolution of a quantum system. The first was derived by considering the trajectories seen by an observer (dubbed the ``strong'' transition) [Bhattacharya, et al., Phys. Rev. Lett. 85: 4852 (2000)], and the second by considering phase-space densities (the ``weak'' transition) [Greenbaum, et al., Chaos 15, 033302 (2005)]. On the face of it these conditions appear rather different. We show, however, that in the semiclassical regime, in which the action of the system is large compared to $\hbar$, and the measurement noise is small, they both offer an essentially equivalent local picture. Within this regime, the weak conditions dominate while in the opposite regime where the action is not much larger than Planck's constant, the strong conditions dominate.

quant-ph↗

arXiv2007

Emergent Quantum Jumps in a Nano-Electro-Mechanical System

We describe a nano-electromechnical system that exhibits the "retroactive" quantum jumps discovered by Mabuchi and Wiseman [Phys. Rev. Lett. 81, 4620 (1998)]. This system consists of a Cooper-pair box coupled to a nano-mechanical resonator, in which the latter is continuously monitored by a single-electron transistor or quantum point-contact. Further, we show that these kinds of jumps, and the jumps that emerge in a continuous quantum non-demolition measurement are one and the same phenomena. We also consider manipulating the jumps by applying feedback control to the Cooper-pair box.

quant-ph↗

arXiv2007

Energy Measurements and Preparation of Canonical Phase States of a Nano-Mechanical Resonator

We show that a continuous quantum non-demolition measurement of the energy of a nanomechanical resonator can be achieved by monitoring the resonator with a quantum point contact via a Cooper-pair box. This technique can further be used to prepare highly non-classical states of two resonators, such as canonical phase-reference states, and so-called "noon" states.

quant-ph↗

arXiv2007

Rapid-purification protocols for optical homodyning

We present a number of rapid-purification feedback protocols for optical homodyne detection of a single optical qubit. We derive first a protocol that speeds up the rate of increase of the average purity of the system, and find that like the equivalent protocol for a non-disspative measurement, this generates a deterministic evolution for the purity in the limit of strong feedback. We also consider two analogues of the Wiseman-Ralph rapid-purification protocol in this setting, and show that like that protocol they speed up the average time taken to reach a fixed level of purity. We also examine how the performance of these algorithms changes with detection efficiency, being an important practical consideration.

quant-ph↗

arXiv2007

Engineering Quantum States of a Nano-Resonator via a Simple Auxiliary System

We show how to engineer an extensive range of non-linear Hamiltonians for a nano-mechanical resonator. The technique requires only a time dependent drive applied to a Cooper-pair box or second oscillator to which the nano-resonator is coupled. This method allows one to generate a large number of non-classical states, as well as Hamiltonians whose classical counterparts are chaotic.

cond-mat.mes-hall↗

arXiv2007

Continous Measurement of the Energy Eigenstates of a Nanomechanical Resonator without a Non-Demolition Probe

We show that it is possible to perform a continuous measurement that continually projects a nano-resonator into its energy eigenstates by employing a linear coupling with a two-state system. This technique makes it possible to perform a measurement that exposes the quantum nature of the resonator by coupling it to a Cooper-pair Box and a superconducting transmission-line resonator.

quant-ph↗

arXiv2007

Quantum communication via a continuously monitored dual spin chain

We analyze a recent protocol for the transmission of quantum states via a dual spin chain [Burgarth and Bose, Phys. Rev. A 71, 052315 (2005)] under the constraint that the receiver's measurement strength is finite. That is, we consider the channel where the ideal, instantaneous and complete von Neumann measurements are replaced with a more realistic continuous measurement. We show that for optimal performance the measurement strength must be "tuned" to the channel spin-spin coupling, and once this is done, one is able to achieve a similar transmission rate to that obtained with ideal measurements. The spin chain protocol thus remains effective under measurement constraints.

quant-ph↗

arXiv2007

Feedback Control of Non-linear Quantum Systems: a Rule of Thumb

We show that in the regime in which feedback control is most effective -- when measurements are relatively efficient, and feedback is relatively strong -- then, in the absence of any sharp inhomogeneity in the noise, it is always best to measure in a basis that does not commute with the system density matrix than one that does. That is, it is optimal to make measurements that disturb the state one is attempting to stabilize.

quant-ph↗

arXiv2006

Rapid state purification protocols for a Cooper pair box

We propose techniques for implementing two different rapid state purification schemes, within the constraints present in a superconducting charge qubit system. Both schemes use a continuous measurement of charge (z) measurements, and seek to minimize the time required to purify the conditional state. Our methods are designed to make the purification process relatively insensitive to rotations about the x-axis, due to the Josephson tunnelling Hamiltonian. The first proposed method, based on the scheme of Jacobs [Phys. Rev. A 67, 030301(R) (2003)] uses the measurement results to control bias (z) pulses so as to rotate the Bloch vector onto the x-axis of the Bloch sphere. The second proposed method, based on the scheme of Wiseman and Ralph [New J. Phys. 8, 90 (2006)] uses a simple feedback protocol which tightly rotates the Bloch vector about an axis almost parallel with the measurement axis. We compare the performance of these and other techniques by a number of different measures.

quant-ph↗

arXiv2006

A Straightforward Introduction to Continuous Quantum Measurement

We present a pedagogical treatment of the formalism of continuous quantum measurement. Our aim is to show the reader how the equations describing such measurements are derived and manipulated in a direct manner. We also give elementary background material for those new to measurement theory, and describe further various aspects of continuous measurements that should be helpful to those wanting to use such measurements in applications. Specifically, we use the simple and direct approach of generalized measurements to derive the stochastic master equation describing the continuous measurements of observables, give a tutorial on stochastic calculus, treat multiple observers and inefficient detection, examine a general form of the measurement master equation, and show how the master equation leads to information gain and disturbance. To conclude, we give a detailed treatment of imaging the resonance fluorescence from a single atom as a concrete example of how a continuous position measurement arises in a physical system.

quant-ph↗

arXiv2006

Feedback cooling of atomic motion in cavity QED

We consider the problem of controlling the motion of an atom trapped in an optical cavity using continuous feedback. In order to realize such a scheme experimentally, one must be able to perform state estimation of the atomic motion in real time. While in theory this estimate may be provided by a stochastic master equation describing the full dynamics of the observed system, integrating this equation in real time is impractical. Here we derive an approximate estimation equation for this purpose, and use it as a drive in a feedback algorithm designed to cool the motion of the atom. We examine the effectiveness of such a procedure using full simulations of the cavity QED system, including the quantized motion of the atom in one dimension.

quant-ph↗

arXiv2006

Concatenated beam splitters, optical feed-forward and the nonlinear sign gate

We consider a nonlinear sign gate implemented using a sequence of two beam splitters, and consider the use of further sequences of beam splitters to implement feed-forward so as to correct an error resulting from the first beam splitter. We obtain similar results to Scheel et al. [Scheel et al., Phys. Rev. A 73, 034301 (2006)], in that we also find that our feed-forward procedure is only able to produce a very minor improvement in the success probability of the original gate.

quant-ph↗

arXiv2006

Applications of Feedback Control in Quantum Systems

We give an introduction to feedback control in quantum systems, as well as an overview of the variety of applications which have been explored to date. This introductory review is aimed primarily at control theorists unfamiliar with quantum mechanics, but should also be useful to quantum physicists interested in applications of feedback control. We explain how feedback in quantum systems differs from that in traditional classical systems, and how in certain cases the results from modern optimal control theory can be applied directly to quantum systems. In addition to noise reduction and stabilization, an important application of feedback in quantum systems is adaptive measurement, and we discuss the various applications of adaptive measurements. We finish by describing specific examples of the application of feedback control to cooling and state-preparation in nano-electro-mechanical systems and single trapped atoms.

quant-ph↗

arXiv2006

Feedback control for communication with non-orthogonal states

Communicating classical information with a quantum system involves the receiver making a measurement on the system so as to distinguish as well as possible the alphabet of states used by the sender. We consider the situation in which this measurement takes an appreciable time. In this case the measurement must be described by a continuous measurement process. We consider a continuous implementation of the optimal measurement for distinguishing between two non-orthogonal states, and show that feedback control can be used during this measurement to increase the rate at which the information regarding the initial preparation is obtained. We show that while the maximum obtainable increase is modest, the effect is purely quantum mechanical in the sense that the enhancement is only possible when the initial states are non-orthogonal. We find further that the enhancement in the rate of information gain is achieved at the expense of reducing the total information which the measurement can extract in the long-time limit.

quant-ph↗

arXiv2006

A bound on the mutual information, and properties of entropy reduction, for quantum channels with inefficient measurements

The Holevo bound is a bound on the mutual information for a given quantum encoding. In 1996 Schumacher, Westmoreland and Wootters [Schumacher, Westmoreland and Wootters, Phys. Rev. Lett. 76, 3452 (1996)] derived a bound which reduces to the Holevo bound for complete measurements, but which is tighter for incomplete measurements. The most general quantum operations may be both incomplete and inefficient. Here we show that the bound derived by SWW can be further extended to obtain one which is yet again tighter for inefficient measurements. This allows us in addition to obtain a generalization of a bound derived by Hall, and to show that the average reduction in the von Neumann entropy during a quantum operation is concave in the initial state, for all quantum operations. This is a quantum version of the concavity of the mutual information. We also show that both this average entropy reduction, and the mutual information for pure state ensembles, are Schur-concave for unitarily covariant measurements; that is, for these measurements, information gain increases with initial uncertainty.

quant-ph↗

arXiv2006

Rapid State-Reduction of Quantum Systems Using Feedback Control

We consider using Hamiltonian feedback control to increase the speed at which a continuous measurement purifies (reduces) the state of a quantum system, and thus to increase the speed of the preparation of pure states. For a measurement of an observable with N equispaced eigenvalues, we show that there exists a feedback algorithm which will speed up the rate of state-reduction by at least a factor of 2(N+1)/3.

quant-ph↗