arXiv subjects

Kurt Kremer

Publications and source records attributed to Kurt Kremer.

At least 19 recordsLinked to original sources

arXiv2026

Roadmap for Condensates in Cell Biology

Biomolecular condensates govern essential cellular processes yet elude description by traditional equilibrium models. This roadmap, distilled from structured discussions at a workshop and reflecting the consensus of its participants, clarifies key concepts for researchers, funding bodies, and journals. After unifying terminology that often separates disciplines, we outline the core physics of condensate formation, review their biological roles, and identify outstanding challenges in nonequilibrium theory, multiscale simulation, and quantitative in-cell measurements. We close with a forward-looking outlook to guide coordinated efforts toward predictive, experimentally anchored understanding and control of biomolecular condensates.

physics.bio-ph↗

arXiv2025

Structure and dynamics of ionic liquids under shear flow

We investigate the intrinsic behavior of ionic liquids under shear flow, using a coarse-grained model of C4mim-PF6 as a prototypical example. The importance of long-ranged electrostatics is assessed as a function of shear rate by comparing Ewald and reaction field treatments. An appropriate comparison is achieved through the implementation of the proper Lees-Edwards boundary conditions within the ESPResSo++ simulation software. Our results demonstrate that while structural properties are relatively insensitive to the electrostatic treatment, the more accurate treatment via the Ewald approach is essential for studies of dynamics, in particular, at lower shear rates. Furthermore, we identify a critical shear rate beyond which structural and dynamical properties begin to deviate from equilibrium behavior, while remaining largely unchanged below this threshold. Finally, we demonstrate that the dynamic heterogeneity of the liquid decreases as a function of increasing shear rate, which can be primarily explained by the faster dynamics induced by the shear flow. These results hold relevance for investigations of process-dependent properties of ionic-liquid-based materials.

physics.chem-ph↗

arXiv2024

Density Fluctuations, Solvation Thermodynamics and Coexistence Curves in Grand Canonical Molecular Dynamics Simulations

Fluid transport across nanometric channels induced by electric, pressure and concentration gradients is ubiquitous in biological systems and fosters various applications. In this context, computer simulation setups with well-defined open-boundary equilibrium starting states are essential in understanding and assisting experimental studies. However, open-boundary computational methods are scarce and typically do not satisfy all the equilibrium conditions imposed by reality. Namely, in the absence of external gradients, 1) the system of interest (SoI) must be at thermodynamic and chemical equilibrium with an infinite reservoir of particles, 2) the fluctuations of the SoI in equilibrium should sample the grand canonical ensemble, 3) the local solvation thermodynamics, which is extremely sensitive to finite-size effects due to solvent depletion, should be correctly described. This point is particularly relevant for out-of-equilibrium systems. Finally, 4) the method should be robust enough to deal with phase transitions and coexistence conditions in the SoI. In this study, we demonstrate with prototypical liquid systems embedded into a reservoir of ideal gas particles that the adaptive resolution simulation (AdResS) method, coupled with particle insertion/deletion steps, satisfies all these requirements. Therefore, this AdResS setup is suitable for performing equilibrium and non-equilibrium simulations of open systems.

cond-mat.soft↗

arXiv2024

Roadmap on Data-Centric Materials Science

Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) and its subset Machine Learning (ML), has become pivotal in addressing all these challenges. This Roadmap on Data-Centric Materials Science explores fundamental concepts and methodologies, illustrating diverse applications in electronic-structure theory, soft matter theory, microstructure research, and experimental techniques like photoemission, atom probe tomography, and electron microscopy. While the roadmap delves into specific areas within the broad interdisciplinary field of materials science, the provided examples elucidate key concepts applicable to a wider range of topics. The discussed instances offer insights into addressing the multifaceted challenges encountered in contemporary materials research.

cond-mat.mtrl-sci↗

arXiv2023

Data-driven identification and analysis of the glass transition in polymer melts

Understanding the nature of glass transition, as well as precise estimation of the glass transition temperature for polymeric materials, remain open questions in both experimental and theoretical polymer sciences. We propose a data-driven approach, which utilizes the high-resolution details accessible through the molecular dynamics simulation and considers the structural information of individual chains. It clearly identifies the glass transition temperature of polymer melts of weakly semiflexible chains. By combining principal component analysis and clustering, we identify the glass transition temperature in the asymptotic limit even from relatively short-time trajectories, which just reach into the Rouse-like monomer displacement regime. We demonstrate that fluctuations captured by the principal component analysis reflect the change in a chain's behaviour: from conformational rearrangement above to small rearrangements below the glass transition temperature. Our approach is straightforward to apply, and should be applicable to other polymeric glass-forming liquids.

cond-mat.soft↗

arXiv2023

Glass transition temperature of thin polymer films

The glass transition temperature and its connection to statistical properties of confined and free-standing polymer films of varying thickness containing unentangled to highly entangled bead-spring chains are studied by molecular dynamics simulations. For confined films, perfect scaling of the thickness-dependent end-to-end distance and radius of gyrations normalized to their bulk values in the directions parallel and perpendicular to the surfaces is obtained. Particularly, the reduced end-to-end distance in the perpendicular direction is very well described by the extended Silberberg model. For bulk polymer melts, the relation between chain length and $T_g$ follows the Fox-Flory equation while $T_g$ for a given film thickness is almost independent of chain length. For films, $T_g$ decreases and is well described by Keddie's formula, where the reduction is more pronounced for free-standing films. For the present model, $T_g$ begins to deviate from bulk $T_g$ at the characteristic film thickness, where the average bond orientation becomes anisotropic and the entanglement density decreases.

cond-mat.soft↗

arXiv2022

Stabilizing $α-$helicity of polypeptide in aqueous urea: Dipole orientation or hydrogen bonding?

Urea denatures proteins due to its strong tendency to dehydrate the first solvation shell via urea-residue preferential binding. However, even after extensive experimental and computational investigations, the influence of urea on the stability of secondary structures remains elusive. For example, contrary to the common understanding, experimental studies have indicated that specific polypeptides, such as poly-alanine or alanine-rich systems, may even show an improved tendency to form secondary structures in aqueous urea. We investigate this seemingly counter-intuitive behaviour using over 15$μ$s long all-atom simulations. These results show how a delicate balance between the localized dipole orientations and hydrogen bonding dictates polypeptide solvation in aqueous urea. Our work establishes a structure-property relationship that highlights the importance of microscopic dipole-dipole orientations/interactions for the operational understanding of macroscopic protein solvation.

cond-mat.soft↗

arXiv2022

FAIR data enabling new horizons for materials research

The prosperity and lifestyle of our society are very much governed by achievements in condensed matter physics, chemistry and materials science, because new products for sectors such as energy, the environment, health, mobility and information technology (IT) rely largely on improved or even new materials. Examples include solid-state lighting, touchscreens, batteries, implants, drug delivery and many more. The enormous amount of research data produced every day in these fields represents a gold mine of the twenty-first century. This gold mine is, however, of little value if these data are not comprehensively characterized and made available. How can we refine this feedstock; that is, turn data into knowledge and value? For this, a FAIR (findable, accessible, interoperable and reusable) data infrastructure is a must. Only then can data be readily shared and explored using data analytics and artificial intelligence (AI) methods. Making data 'findable and AI ready' (a forward-looking interpretation of the acronym) will change the way in which science is carried out today. In this Perspective, we discuss how we can prepare to make this happen for the field of materials science.

cond-mat.mtrl-sci↗

arXiv2021

Physical entanglements mediate coherent motion of the active topological glass confined within a spherical cavity

Motivated by chromosomes enclosed in nucleus and the recently discovered active topological glass, we study a spherically confined melt of long nonconcatenated active polymer rings. Without activity, the rings exhibit the same average large-scale conformational properties as chromatin fiber. Upon activating consecutive monomer segments on the rings, the system arrives at a glassy steady state due to activity-enhanced topological constraints. The latter generate coherent motions of the system, however the resulting large-scale structures are inconsistent with the fractal globule model. We observe microphase separation between active and passive segments without systematic trends in the positioning of active domains within the confining sphere. We find that tank-treading of active segments along the ring contour enhances active-passive phase separation in the state of active topological glass when both diffusional and conformational relaxation of the rings are significantly suppressed. Finally, although the present model of partly-active rings is not compatible with the large-scale chromatin organization, our results suggest that the activity-enhanced entanglements that result in facilitated intra- and inter-chromosomal contacts might be relevant for chromatin structure at smaller scales.

cond-mat.soft↗

arXiv2021

Dynamical properties across different coarse-grained models for ionic liquids

Room-temperature ionic liquids (RTILs) stand out among molecular liquids for their rich physicochemical characteristics, including structural and dynamic heterogeneity. The significance of electrostatic interactions in RTILs results in long characteristic length- and timescales, and has motivated the development of a number of coarse-grained (CG) simulation models. In this study, we aim to better understand the connection between certain CG parametrization strategies and the dynamical properties and transferability of the resulting models. We systematically compare five CG models: a model largely parametrized from experimental thermodynamic observables; a refinement of this model to increase its structural accuracy; and three models that reproduce a given set of structural distribution functions by construction, with varying intramolecular parametrizations and reference temperatures. All five CG models display limited structural transferability over temperature, and also result in various effective dynamical speedup factors, relative to a reference atomistic model. On the other hand, the structure-based CG models tend to result in more consistent cation-anion relative diffusion than the thermodynamic-based models, for a single thermodynamic state point. By linking short- and long-timescale dynamical behaviors, we demonstrate that the varying dynamical properties of the different coarse-grained models can be largely collapsed onto a single curve, which provides evidence for a route to constructing dynamically-consistent CG models of RTILs.

cond-mat.soft↗

arXiv2021

Proline isomerization regulates the phase behavior of elastin-like polypeptides in water

Responsiveness of polypeptides and polymers in aqueous solution plays an important role in biomedical applications and in designing advanced functional materials. Elastin-like polypeptides (ELPs) are a well-known class of synthetic intrinsically disordered proteins (IDPs), which exhibit a lower critical solution temperature (LCST) in pure water. The LCST transition can be further tuned by proline isomerization. Here, we study and compare the influence of cis/trans proline isomerization on the collapse of single ELPs in aqueous solution. Our results reveal that cis isomers play an important role in tuning the phase behavior of ELPs by hindering peptide-water hydrogen bonding while promoting intramolecular interactions.

cond-mat.soft↗

arXiv2020

Efficient equilibration of confined and free-standing films of highly entangled polymer melts

Equilibration of polymer melts containing highly entangled long polymer chains in confinement or with free surfaces is a challenge for computer simulations. We approach this problem by first studying polymer melts based on the soft-sphere coarse-grained model confined between two walls with periodic boundary conditions in two directions parallel to the walls. Then we apply backmapping to reinsert the microscopic details of the underlying bead-spring model. Tuning the strength of the wall potential, the monomer density of confined polymer melts in equilibrium is kept at the bulk density even near the walls. In a weak confining regime, we observe the same conformational properties of chains as in the bulk melt showing that our confined polymer melts have reached their equilibrated state. Our methodology provides an efficient way of equilibrating large polymer films with different thicknesses and is not confined to a specific underlying microscopic model. Switching off the wall potential in the direction perpendicular to the walls, enables to study free-standing highly entangled polymer films or polymer films with one supporting substrate.

cond-mat.soft↗

arXiv2020

Free-energy landscape of polymer-crystal polymorphism

Polymorphism rationalizes how processing can control the final structure of a material. The rugged free-energy landscape and exceedingly slow kinetics in the solid state have so far hampered computational investigations. We report for the first time the free-energy landscape of a polymorphic crystalline polymer, syndiotactic polystyrene. Coarse-grained metadynamics simulations allow us to efficiently sample the landscape at large. The free-energy difference between the two main polymorphs, $α$ and $β$, is further investigated by quantum-chemical calculations. The two methods are in line with experimental observations: they predict $β$ as the more stable polymorph at standard conditions. Critically, the free-energy landscape suggests how the $α$ polymorph may lead to experimentally observed kinetic traps. The combination of multiscale modeling, enhanced sampling, and quantum-chemical calculations offers an appealing strategy to uncover complex free-energy landscapes with polymorphic behavior.

cond-mat.soft↗

arXiv2020

Why Do Elastin-Like Polypeptides Possibly Have Different Solvation Behaviors in Water-Ethanol and Water-Urea Mixtures?

The solvent quality determines the collapsed or the expanded state of a polymer. For example, a polymer dissolved in a poor solvent collapses, whereas in a good solvent it opens up. While this standard understanding is generally valid, there are examples when a polymer collapses even in a mixture of two good solvents. This phenomenon, commonly known as co-non-solvency, is usually associated with smart polymers. Moreover, recent experiments have shown that the elastin-like polypeptides (ELPs) show co-non-solvency behavior in aqueous-ethanol mixtures. In this study, we investigate the phase behavior of ELPs in aqueous binary mixtures using molecular dynamics simulations of all-atom and complementary explicit solvent generic models. The model is parameterized by mapping the solvation free energy obtained from the all-atom simulations onto the generic interaction parameters. For this purpose, we derive segment based generic parameters for four different peptides, namely proline (P), valine (V), glycine (G) and alanine (A). Here we compare the conformational behavior of two ELP sequences, namely VPGGG and VPGVG, in aqueous-ethanol and -urea mixtures. Consistent with recent experiments, we find that ELPs show co-non-solvency in aqueous-ethanol mixtures. Ethanol molecules have preferential binding with all ELP residues and thus driving the coil-to-globule transition. On the contrary, ELP conformations show weak variation in aqueous-urea mixtures. Our simulations suggest that the glycine residues dictate the overall behavior of ELPs in aqueous-urea, where urea molecules have a rather weak preferential binding with glycine, i.e., less than kT. While the validation of the latter findings will require more detailed experimental investigation, the results presented here may provide a new twist to the present understanding of cosolvent interactions with peptides and proteins.

cond-mat.soft↗

arXiv2020

Ligand-protein interactions in lysozyme investigated through a dual-resolution model

A fully atomistic modelling of biological macromolecules at relevant length- and time-scales is often cumbersome or not even desirable, both in terms of computational effort required and it a posteriori analysis. This difficulty can be overcome with the use of multi-resolution models, in which different regions of the same system are concurrently described at different levels of detail. In enzymes, computationally expensive atomistic detail is crucial in the modelling of the active site in order to capture e.g. the chemically subtle process of ligand binding. In contrast, important yet more collective properties of the remainder of the protein can be reproduced with a coarser description. In the present work, we demonstrate the effectiveness of this approach through the calculation of the binding free energy of hen egg white lysozyme (HEWL) with the inhibitor di-N-acetylchitotriose. Particular attention is posed to the impact of the mapping, i.e. the selection of atomistic and coarse-grained residues, on the binding free energy. It is shown that, in spite of small variations of the binding free energy with respect to the active site resolution, the separate contributions coming from different energetic terms (such as electrostatic and van der Waals interactions) manifest a stronger dependence on the mapping, thus pointing to the existence of an optimal level of intermediate resolution.

q-bio.BM↗

arXiv2019

Open-Boundary Hamiltonian adaptive resolution. From grand canonical to non-equilibrium molecular dynamics simulations

We propose an open-boundary molecular dynamics method in which an atomistic system is in contact with an infinite particle reservoir at constant temperature, volume and chemical potential. In practice, following the Hamiltonian adaptive resolution strategy, the system is partitioned into a domain of interest and a reservoir of non-interacting, ideal gas, particles. An external potential, applied only in the interfacial region, balances the excess chemical potential of the system. To ensure that the size of the reservoir is infinite, we introduce a particle insertion/deletion algorithm to control the density in the ideal gas region. We show that it is possible to study non-equilibrium phenomena with this open-boundary molecular dynamics method. To this aim, we consider a prototypical confined liquid under the influence of an external constant density gradient. The resulting pressure-driven flow across the atomistic system exhibits a velocity profile consistent with the corresponding solution of the Navier-Stokes equation. In contrast to available computational methods in which external forces drive the system far from equilibrium, this approach conserves momentum and closely resembles experimental conditions. The presented method can be used to study various direct and indirect out-of-equilibrium conditions in complex molecular systems.

cond-mat.stat-mech↗

arXiv2019

Direct route to reproducing pair distribution functions with coarse-grained models via transformed atomistic cross correlations

Coarse-grained (CG) models are often parametrized to reproduce one-dimensional structural correlation functions of an atomically-detailed model along the degrees of freedom governing each interaction potential. While cross correlations between these degrees of freedom inform the optimal set of interaction parameters, the correlations generated from the higher-resolution simulations are often too complex to act as an accurate proxy for the CG correlations. Instead, the most popular methods determine the interaction parameters iteratively, while assuming that individual interactions are uncorrelated. While these iterative methods have been validated for a wide range of systems, they also have disadvantages when parametrizing models for multi-component systems or when refining previously established models to better reproduce particular structural features. In this work, we propose two distinct approaches for the direct (i.e., non-iterative) parametrization of a CG model by adjusting the high-resolution cross correlations of an atomistic model in order to more accurately reflect correlations that will be generated by the resulting CG model. The derived models more accurately describe the low-order structural features of the underlying AA model, while necessarily generating inherently distinct cross correlations compared with the atomically-detailed reference model. We demonstrate the proposed methods for a one-site-per-molecule representation of liquid water, where pairwise interactions are incapable of reproducing the true tetrahedral solvation structure. We then investigate the precise role that distinct cross-correlation features play in determining the correct pair correlation functions, evaluating the importance of the placement of correlation features as well as the balance between features appearing in different solvation shells.

cond-mat.soft↗

arXiv2019

A coarse-grained polymer model for studying the glass transition

To study the cooling behavior and the glass transition of polymer melts in bulk and with free surfaces a coarse-grained weakly semi-flexible polymer model is developed. Based on a standard bead spring model with purely repulsive interactions an attractive potential between non-bonded monomers is added, such that the pressure of polymer melts is tuned to zero. Additionally, the commonly used bond bending potential [Everaers et al., Science 303, 823 (2004)] controlling the chain stiffness is replaced by a new bond bending potential. For this model, we show that the Kuhn length and the internal distances along the chains in the melt only very weakly depend on temperature, just as for typical experimental systems. The glass transition is observed by the temperature dependency of the melt density and the characteristic non-Arrhenius slowing down of the chain mobility. The model is set to allow for a fast switch between models, for which a wealth of data already exists.

cond-mat.soft↗