arXiv subjects

Kyrylo Gerashchenko

Publications and source records attributed to Kyrylo Gerashchenko.

4 recordsLinked to original sources

arXiv2026

Experimental realization of a $\cos(2\varphi)$ transmon qubit

Superconducting circuits with embedded symmetries are good candidates to robustly protect quantum information from dominant error channels. The $\cos(2\varphi)$ qubit, consisting of an island shunted to ground through a tunneling element that selectively transmits pairs of Cooper pairs, leverages charge-parity symmetry to protect from charge-induced errors. In this experiment, we observe a doublet of states of opposite Cooper-pair parity split by $13.6~\mathrm{MHz}$. Operating in a soft-transmon regime, this splitting is two orders of magnitude smaller than in previous implementations, pushing charge-induced losses well beyond the measured coherence times. Despite the low transition frequency, we demonstrate coherent qubit control, single-shot readout, and resolve quantum jumps. Charge protection of the qubit is evidenced by a $100-$fold suppression of the island charge matrix element compared to the unprotected plasmon transition, placing dielectric loss limits above $10~\mathrm{ms}$. The measured $T_1 = 70~\mu\mathrm{s}$ and $T_2^\mathrm{echo}= 2.5~\mu\mathrm{s}$ are instead limited by $1/f$ flux noise in the tunnelling element's loop. This experiment shows that pushing Cooper-pair pairing in the transmon regime sets high limits on charge-induced losses while preserving coherent control and single-shot readout of the low-frequency qubit. We identify flux noise as the dominant remaining limitation, calling for gradiometric designs or novel $4e$-tunneling elements.

quant-ph↗

arXiv2025

Cryogenic rf-to-microwave transducer based on a dc-biased electromechanical system

We report a two-stage, heterodyne rf-to-microwave transducer that combines a tunable electrostatic pre-amplifier with a superconducting electromechanical cavity. A metalized Si$_3$N$_4$ membrane (3 MHz frequency) forms the movable plate of a vacuum-gap capacitor in a microwave LC resonator. A dc bias across the gap converts any small rf signal into a resonant electrostatic force proportional to the bias, providing a voltage-controlled gain that multiplies the cavity's intrinsic electromechanical gain. In a flip-chip device with a 1.5 $\mathrm{\mu}$m gap operated at 10 mK we observe dc-tunable anti-spring shifts, and rf-to-microwave transduction at 49 V bias, achieving a charge sensitivity of 87 $\mathrm{\mu}$e/$\sqrt{\mathrm{Hz}}$ (0.9 nV/$\sqrt{\mathrm{Hz}}$). Extrapolation to sub-micron gaps and state-of-the-art $Q>10^8$ membrane resonators predicts sub-200 fV/$\sqrt{\mathrm{Hz}}$ sensitivity, establishing dc-biased electromechanics as a practical route towards quantum-grade rf electrometers and low-noise modular heterodyne links for superconducting microwave circuits and charge or voltage sensing.

quant-ph↗

arXiv2025

Probing the quantum motion of a macroscopic mechanical oscillator with a radio-frequency superconducting qubit

Long-lived mechanical resonators like drums oscillating at MHz frequencies and operating in the quantum regime are a powerful platform for quantum technologies and tests of fundamental physics. Yet, quantum control of such systems remains challenging, owing to their low energy scale and the difficulty of achieving efficient coupling to other well-controlled quantum devices. Here, we demonstrate repeated coherent interactions between a 4 MHz suspended silicon nitride membrane and a resonant superconducting heavy-fluxonium qubit. The qubit is initialized at an effective temperature of $21~\mathrm{\mu K}$ and read out with 77% single-shot fidelity. During the $6~\mathrm{ms}$ lifetime of the membrane the two systems swap excitations more than 300 times. After each interaction, a state-selective qubit detection is performed, implementing a stroboscopic series of weak measurements that provide information about the mechanical state. The accumulated records reconstruct the position noise spectrum of the membrane, revealing both its thermal occupation $n_\mathrm{th}\approx47$ at $10~\mathrm{mK}$ and the qubit-induced back-action. By preparing the qubit either in its ground or excited state before each interaction, we observe an imbalance between the emission and absorption spectra, proportional to $n_\mathrm{th}$ and $n_\mathrm{th}+1$, respectively-a hallmark of the non-commutation of phonon creation and annihilation operators. Since the predicted Di\'osi-Penrose gravitational collapse time is comparable to the measured mechanical decoherence time, our architecture enters a regime where gravity-induced decoherence could be tested directly.

quant-ph↗

arXiv2025

Hyperinductance based on stacked Josephson junctions

Superinductances are superconducting circuit elements that combine a large inductance with a low parasitic capacitance to ground, resulting in a characteristic impedance exceeding the resistance quantum $R_Q = h/(2e)^2 \simeq 6.45 \mathrm{k}\Omega$. In recent years, these components have become key enablers for emerging quantum circuit architectures. However, achieving high characteristic impedance while maintaining scalability and fabrication robustness remains a major challenge. In this work, we present two fabrication techniques for realizing superinductances based on vertically stacked Josephson junctions. Using a multi-angle Manhattan (MAM) process and a zero-angle (ZA) evaporation technique -- in which junction stacks are connected pairwise using airbridges -- we fabricate one-dimensional chains of stacks that act as high-impedance superconducting transmission lines. Two-tone microwave spectroscopy reveals the expected $\sqrt{n}$ scaling of the impedance with the number of junctions per stack. The chain fabricated using the ZA process, with nine junctions per stack, achieves a characteristic impedance of $\sim 16 \mathrm{k}\Omega$, a total inductance of $5.9 \mathrm{\mu H}$, and a maximum frequency-dependent impedance of $50 \mathrm{k}\Omega$ at 1.4 GHz. Our results establish junction stacking as a scalable, robust, and flexible platform for next-generation quantum circuits requiring ultra-high impedance environments.

quant-ph↗