Searcharxiv⌕ Search

arXiv subjects

Kyujin Kwak

Publications and source records attributed to Kyujin Kwak.

27 records · Page 2Linked to original sources

Mixing between High Velocity Clouds and the Galactic Halo

In the Galactic halo, metal-bearing Galactic halo material mixes into high velocity clouds (HVCs) as they hydrodynamically interact. This interaction begins long before the clouds completely dissipate and long before they slow to the velocity of the Galactic material. In order to make quantitative estimates of the mixing efficiency and resulting metal enrichment of HVCs, we made detailed 2 and 3 dimensional simulations of cloud-ISM interactions. Our simulations track the hydrodynamics and time dependent ionization levels. They assume that the cloud originally has a warm temperature and extremely low metallicity while the surrounding medium has a high temperature, low density, and substantial metallicity, but our simulations can be generalized to other choices of initial metallicities. In our simulations, mixing between cloud and halo gas noticeably raises the metallicity of the high velocity material. We present plots of the mixing efficiency and metal enrichment as a function of time.

astro-ph.GA↗

The Origin of the X-ray Emission from the High-velocity Cloud MS30.7-81.4-118

A soft X-ray enhancement has recently been reported toward the high-velocity cloud MS30.7-81.4-118 (MS30.7), a constituent of the Magellanic Stream. In order to investigate the origin of this enhancement, we have analyzed two overlapping XMM-Newton observations of this cloud. We find that the X-ray enhancement is $\sim$6' or $\sim$100 pc across, and is concentrated to the north and west of the densest part of the cloud. We modeled the X-ray enhancement with a variety of spectral models. A single-temperature equilibrium plasma model yields a temperature of $(3.69^{+0.47}_{-0.44}) \times 10^6$ K and a 0.4-2.0 keV luminosity of $7.9 \times 10^{33}$ erg s$^{-1}$. However, this model underpredicts the on-enhancement emission around 1 keV, which may indicate the additional presence of hotter plasma ($T \gtrsim 10^7$ K), or that recombination emission is important. We examined several different physical models for the origin of the X-ray enhancement. We find that turbulent mixing of cold cloud material with hot ambient material, compression or shock heating of a hot ambient medium, and charge exchange reactions between cloud atoms and ions in a hot ambient medium all lead to emission that is too faint. In addition, shock heating in a cool or warm medium leads to emission that is too soft (for reasonable cloud speeds). We find that magnetic reconnection could plausibly power the observed X-ray emission, but resistive magnetohydrodynamical simulations are needed to test this hypothesis. If magnetic reconnection is responsible for the X-ray enhancement, the observed spectral properties could potentially constrain the magnetic field in the vicinity of the Magellanic Stream.

astro-ph.GA↗

Kaon Condensation in Neutron Stars with Skyrme-Hartree-Fock Models

We investigate nuclear matter equations of state in neutron star with kaon condensation. It is generally known that the existence of kaons in neutron star makes the equation of state soft so that the maximum mass of neutron star is not likely to be greater than 2.0 $M_{\odot}$, the maximum mass constrained by current observations. With existing Skyrme force model parameters, we calculate nuclear equations of state and check the possibility of kaon condensation in the core of neutron stars. The results show that even with the kaon condensation, the nuclear equation of state satisfies both the maximum mass and the allowed ranges of mass and radius.

nucl-th↗

Modeling the X-rays Resulting from High Velocity Clouds

With the goal of understanding why X-rays have been reported near some high velocity clouds, we perform detailed 3 dimensional hydrodynamic and magnetohydrodynamic simulations of clouds interacting with environmental gas like that in the Galaxy's thick disk/halo or the Magellanic Stream. We examine 2 scenarios. In the first, clouds travel fast enough to shock-heat warm environmental gas. In this scenario, the X-ray productivity depends strongly on the speed of the cloud and the radiative cooling rate. In order to shock-heat environmental gas to temperatures of > or = 10^6 K, cloud speeds of > or = 300 km/s are required. If cooling is quenched, then the shock-heated ambient gas is X-ray emissive, producing bright X-rays in the 1/4 keV band and some X-rays in the 3/4 keV band due to O VII and other ions. If, in contrast, the radiative cooling rate is similar to that of collisional ionizational equilibrium plasma with solar abundances, then the shocked gas is only mildly bright and for only about 1 Myr. The predicted count rates for the non-radiative case are bright enough to explain the count rate observed with XMM-Newton toward a Magellanic Stream cloud and some enhancement in the ROSAT 1/4 keV count rate toward Complex C, while the predicted count rates for the fully radiative case are not. In the second scenario, the clouds travel through and mix with hot ambient gas. The mixed zone can contain hot gas, but the hot portion of the mixed gas is not as bright as those from the shock-heating scenario.

astro-ph.GA↗

Simulations of High-Velocity Clouds. II. Ablation from High-Velocity Clouds as a Source of Low-Velocity High Ions

In order to determine if the material ablated from high-velocity clouds (HVCs) is a significant source of low-velocity high ions (C IV, N V, and O VI) such as those found in the Galactic halo, we simulate the hydrodynamics of the gas and the time-dependent ionization evolution of its carbon, nitrogen, and oxygen ions. Our suite of simulations examines the ablation of warm material from clouds of various sizes, densities, and velocities as they pass through the hot Galactic halo. The ablated material mixes with the environmental gas, producing an intermediate-temperature mixture that is rich in high ions and that slows to the speed of the surrounding gas. We find that the slow mixed material is a significant source of the low-velocity O VI that is observed in the halo, as it can account for at least ~1/3 of the observed O VI column density. Hence, any complete model of the high ions in the halo should include the contribution to the O VI from ablated HVC material. However, such material is unlikely to be a major source of the observed C IV, presumably because the observed C IV is affected by photoionization, which our models do not include. We discuss a composite model that includes contributions from HVCs, supernova remnants, a cooling Galactic fountain, and photoionization by an external radiation field. By design, this model matches the observed O VI column density. This model can also account for most or all of the observed C IV, but only half of the observed N V.

astro-ph.GA↗

Simulations of High-Velocity Clouds. I. Hydrodynamics and High-Velocity High Ions

We present hydrodynamic simulations of high-velocity clouds (HVCs) traveling through the hot, tenuous medium in the Galactic halo. A suite of models was created using the FLASH hydrodynamics code, sampling various cloud sizes, densities, and velocities. In all cases, the cloud-halo interaction ablates material from the clouds. The ablated material falls behind the clouds, where it mixes with the ambient medium to produce intermediate-temperature gas, some of which radiatively cools to less than 10,000 K. Using a non-equilibrium ionization (NEI) algorithm, we track the ionization levels of carbon, nitrogen, and oxygen in the gas throughout the simulation period. We present observation-related predictions, including the expected H I and high ion (C IV, N V, and O VI) column densities on sight lines through the clouds as functions of evolutionary time and off-center distance. The predicted column densities overlap those observed for Complex C. The observations are best matched by clouds that have interacted with the Galactic environment for tens to hundreds of megayears. Given the large distances across which the clouds would travel during such time, our results are consistent with Complex C having an extragalactic origin. The destruction of HVCs is also of interest; the smallest cloud (initial mass \approx 120 Msun) lost most of its mass during the simulation period (60 Myr), while the largest cloud (initial mass \approx 4e5 Msun) remained largely intact, although deformed, during its simulation period (240 Myr).

astro-ph.GA↗

The Origin of the Hot Gas in the Galactic Halo: Confronting Models with XMM-Newton Observations

We compare the predictions of three physical models for the origin of the hot halo gas with the observed halo X-ray emission, derived from 26 high-latitude XMM-Newton observations of the soft X-ray background between $l=120\degr$ and $l=240\degr$. These observations were chosen from a much larger set of observations as they are expected to be the least contaminated by solar wind charge exchange emission. We characterize the halo emission in the XMM-Newton band with a single-temperature plasma model. We find that the observed halo temperature is fairly constant across the sky (~1.8e6-2.3e6 K), whereas the halo emission measure varies by an order of magnitude (~0.0005-0.006 cm^-6 pc). When we compare our observations with the model predictions, we find that most of the hot gas observed with XMM-Newton does not reside in isolated extraplanar supernova remnants -- this model predicts emission an order of magnitude too faint. A model of a supernova-driven interstellar medium, including the flow of hot gas from the disk into the halo in a galactic fountain, gives good agreement with the observed 0.4-2.0 keV surface brightness. This model overpredicts the halo X-ray temperature by a factor of ~2, but there are a several possible explanations for this discrepancy. We therefore conclude that a major (possibly dominant) contributor to the halo X-ray emission observed with XMM-Newton is a fountain of hot gas driven into the halo by disk supernovae. However, we cannot rule out the possibility that the extended hot halo of accreted material predicted by disk galaxy formation models also contributes to the emission.

astro-ph.GA↗

Numerical Study of Turbulent Mixing Layers with Non-Equilibrium Ionization Calculations

Highly ionized species such as C IV, N V, and O VI, are commonly observed in diffuse gas in various places in the universe, such as in our Galaxy's disk and halo, high velocity clouds (HVCs), external galaxies, and the intergalactic medium. One possible mechanism for producing high ions is turbulent mixing of cool gas with hotter gas in locations where these gases slide past each other. By using hydrodynamic simulations with radiative cooling and non-equilibrium ionization (NEI) calculations, we investigate the physical properties of turbulent mixing layers and the production of high ions. We find that most of the mixing occurs on the hot side of the hot/cool interface and that the mixed region separates into a tepid zone containing radiatively cooled, C IV-rich gas and a hotter zone which is rich in C IV, N V, and O VI. Mixing occurs faster than ionization or recombination, making the mixed gas a better source of C IV, N V, and O VI in our NEI simulations than in our collisional ionization equilibrium (CIE) simulations. In addition, the gas radiatively cools faster than the ions recombine, which also allows large numbers of high ions to linger in the NEI simulations. For these reasons, our NEI calculations predict more high ions than our CIE calculations predict. We also simulate various initial configurations of turbulent mixing layers and discuss their results. We compare the results of our simulations with observations and other models, including other turbulent mixing calculations. The ratios of C IV to N V and N V to O VI are in reasonable agreement with the averages calculated from observations of the halo. There is a great deal of variation from sightline to sightline and with time in our simulations. Such spatial and temporal variation may explain some of the variation seen among observations.

astro-ph.GA↗

The Evolution of Gas Clouds Falling in the Magnetized Galactic Halo: High Velocity Clouds (HVCs) Originated in the Galactic Fountain

In the Galactic fountain scenario, supernovae and/or stellar winds propel material into the Galactic halo. As the material cools, it condenses into clouds. By using FLASH three-dimensional magnetohydrodynamic simulations, we model and study the dynamical evolution of these gas clouds after they form and begin to fall toward the Galactic plane. In our simulations, we assume that the gas clouds form at a height of z=5 kpc above the Galactic midplane, then begin to fall from rest. We investigate how the cloud's evolution, dynamics, and interaction with the interstellar medium (ISM) are affected by the initial mass of the cloud. We find that clouds with sufficiently large initial densities (> 0.1 hydrogen atoms per cc) accelerate sufficiently and maintain sufficiently large column densities as to be observed and identified as high-velocity clouds (HVCs) even if the ISM is weakly magnetized (1.3 micro Gauss). We also investigate the effects of various possible magnetic field configurations. As expected, the ISM's resistance is greatest when the magnetic field is strong and perpendicular to the motion of the cloud. The trajectory of the cloud is guided by the magnetic field lines in cases where the magnetic field is oriented diagonal to the Galactic plane. The model cloud simulations show that the interactions between the cloud and the ISM can be understood via analogy to the shock tube problem which involves shock and rarefaction waves. We also discuss accelerated ambient gas, streamers of material ablated from the clouds, and the cloud's evolution from a sphere-shaped to a disk- or cigar-shaped object.

astro-ph.GA↗