arXiv subjects

Kyunghoon Lee

Publications and source records attributed to Kyunghoon Lee.

16 recordsLinked to original sources

arXiv2026

20 Second Parity Lifetime in an InAs--Pb Tetron Device

A central promise of topological quantum computing is that increasing the excitation gap improves device performance significantly. Here, we experimentally validate this principle in an InAs--Pb tetron device via interferometric single-shot parity measurements. By replacing aluminum with the higher-gap superconductor lead in our superconductor-semiconductor hybrid devices, we have improved the robustness of our topological phase. In addition, to enable fast and precise bring-up at scale, we have developed an rf measurement technique that resolves low-energy wire-end states and directly measures their energy splitting with $μ\text{eV}$ precision. We employ this technique to bring up a device in a multi-tetron array and perform parity measurements of one of the tetron's hybrid nanowires (NWs). By controllably switching the wire parity, we observe $h/2e$-periodic bimodal shifts in the quantum capacitance of a quantum dot coupled to the hybrid nanowire in an interference loop. Further time-resolved measurements reveal a characteristic parity switching time of $\sim 20$ s with some instances reaching minute-scale. Such extremely long parity lifetimes are orders of magnitude longer than typical qubit operation times, which are on the order of $μ\text{s}$. Finally, we discuss potential implications for the fidelity of Pauli measurements.

cond-mat.mes-hall↗

arXiv2025

Distinct Lifetimes for $X$ and $Z$ Loop Measurements in a Majorana Tetron Device

We present a hardware realization and measurements of a tetron qubit device in a superconductor-semiconductor heterostructure. The device architecture contains two parallel superconducting nanowires, which support four Majorana zero modes (MZMs) when tuned into the topological phase, and a trivial superconducting backbone. Two distinct readout interferometers are formed by connecting the superconducting structure to a series of quantum dots. We perform single-shot interferometric measurements of the fermion parity for the two loops, designed to implement Pauli-$X$ and $Z$ measurements of the tetron. Performing repeated single-shot measurements yields two widely separated time scales $τ_X = 14.5\pm 0.3 \, \mathrm{μs}$ and $τ_Z = 12.4\pm 0.4\, \mathrm{ms}$ for parity switches observed in the $X$ and $Z$ measurement loops, which we attribute to intra-wire parity switches and external quasiparticle poisoning, respectively. We estimate assignment errors of $\mathrm{err}^X_a=16\%$ and $\mathrm{err}^Z_a=0.5\%$ for $X$ and $Z$ measurement-based operations, respectively.

cond-mat.mes-hall↗

arXiv2025

Roadmap to fault tolerant quantum computation using topological qubit arrays

We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operations; an eight-qubit device that can be used to show an improvement of a two-qubit operation when performed on logical qubits rather than directly on physical qubits; and a topological qubit array supporting lattice surgery demonstrations on two logical qubits. Devices that enable this path require a superconductor-semiconductor heterostructure that supports a topological phase, quantum dots and coupling between those quantum dots that can create the appropriate loops for interferometric measurements, and a microwave readout system that can perform fast, low-error single-shot measurements. We describe the key design components of these qubit devices, along with the associated protocols for demonstrations of single-qubit benchmarking, Clifford gate execution, quantum error detection, and quantum error correction, which differ greatly from those in more conventional qubits. Finally, we comment on implications and advantages of this architecture for utility-scale quantum computation.

quant-ph↗

arXiv2025

Response to recent comments on Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supp. Info. for Nature 638, 651-655 (2025)

The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscripts [arXiv:2502.19560, arXiv:2503.08944] engage with the topological gap protocol and its use in Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supplementary Information for Nature 638, 651-655 (2025), although they do not explicitly dispute the main results of either one. We demonstrate that the objections in arXiv:2502.19560 and arXiv:2503.08944 are unfounded, and we uphold the conclusions of Phys. Rev. B 107, 245423 (2023) and Nature 638, 651-655 (2025). Specifically, we show that no flaws have been identified in our estimate of the false discovery rate (FDR). We provide a point-by-point rebuttal of the comments in arXiv:2502.19560 and arXiv:2503.08944.

cond-mat.mes-hall↗

arXiv2025

Performance of Superconducting Resonators Suspended on SiN Membranes

Suspending devices on thin SiN membranes can limit their interaction with the bulk substrate and reduce parasitic capacitance to ground. While suspending devices on membranes is used in many fields including radiation detection using superconducting circuits, there has been less investigation into maximum membrane aspect ratios and achievable suspended device quality, metrics important to establish the applicable scope of the technique. Here, we investigate these metrics by fabricating superconducting coplanar waveguide resonators entirely atop thin ($\sim$110 nm) SiN membranes, where the membrane's shortest length to thickness yields an aspect ratio of approximately $7.4 \times 10^3$. We compare these membrane resonators to on-substrate resonators on the same chip, finding similar internal quality factors $\sim$$10^5$ at single photon levels. Furthermore, we confirm that these membranes do not adversely affect resonator thermalization and conduct further materials characterization. By achieving high quality superconducting circuit devices fully suspended on thin SiN membranes, our results help expand the technique's scope to potential uses including incorporating higher aspect ratio membranes for device suspension and creating larger footprint, high impedance, and high quality devices.

quant-ph↗

arXiv2024

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%.

cond-mat.mes-hall↗

arXiv2021

Correlation-Driven Electron-Hole Asymmetry in Graphene Field Effect Devices

Electron-hole asymmetry is a fundamental property in solids that can determine the nature of quantum phase transitions and the regime of operation for devices. The observation of electron-hole asymmetry in graphene and recently in the phase diagram of bilayer graphene has spurred interest into whether it stems from disorder or from fundamental interactions such as correlations. Here, we report an effective new way to access electron-hole asymmetry in 2D materials by directly measuring the quasiparticle self-energy in graphene/Boron Nitride field effect devices. As the chemical potential moves from the hole to the electron doped side, we see an increased strength of electronic correlations manifested by an increase in the band velocity and inverse quasiparticle lifetime. These results suggest that electronic correlations play an intrinsic role in driving electron hole asymmetry in graphene and provide a new insight for asymmetries in more strongly correlated materials.

cond-mat.mes-hall↗

arXiv2020

High-Performance Atomically-Thin Room-Temperature NO2 Sensor

The development of room-temperature sensing devices for detecting small concentrations of molecular species is imperative for a wide range of low-power sensor applications. We demonstrate a room-temperature, highly sensitive, selective, and reversible chemical sensor based on a monolayer of the transition metal dichalcogenide Re0.5Nb0.5S2. The sensing device exhibits thickness dependent carrier type, and upon exposure to NO2 molecules, its electrical resistance considerably increases or decreases depending on the layer number. The sensor is selective to NO2 with only minimal response to other gases such as NH3, CH2O, and CO2. In the presence of humidity, not only are the sensing properties not deteriorated, but also the monolayer sensor shows complete reversibility with fast recovery at room temperature. We present a theoretical analysis of the sensing platform and identify the atomically-sensitive transduction mechanism.

cond-mat.mtrl-sci↗

arXiv2020

Ultra-high-resolution imaging of moiré lattices and superstructures using scanning microwave impedance microscopy under ambient conditions

Two-dimensional heterostructures with layers of slightly different lattice vectors exhibit a new periodic structure known as moire lattices. Moire lattice formation provides a powerful new way to engineer the electronic structure of two-dimensional materials for realizing novel correlated and topological phenomena. In addition, superstructures of moire lattices can emerge from multiple misaligned lattice vectors or inhomogeneous strain distribution, which offers an extra degree of freedom in the electronic band structure design. High-resolution imaging of the moire lattices and superstructures is critical for quantitative understanding of emerging moire physics. Here we report the nanoscale imaging of moire lattices and superstructures in various graphene-based samples under ambient conditions using an ultra-high-resolution implementation of scanning microwave impedance microscopy. We show that, quite remarkably, although the scanning probe tip has a gross radius of ~100 nm, an ultra-high spatial resolution in local conductivity profiles better than 5 nm can be achieved. This resolution enhancement not only enables to directly visualize the moire lattices in magic-angle twisted double bilayer graphene and composite super-moire lattices, but also allows design path toward artificial synthesis of novel moire superstructures such as the Kagome moire from the interplay and the supermodulation between twisted graphene and hexagonal boron nitride layers.

cond-mat.mes-hall↗

arXiv2019

Visualization of the flat electronic band in twisted bilayer graphene near the magic angle twist

Bilayer graphene was theorized to host a moire miniband with flat dispersion if the layers are stacked at specific twist angles known as the magic angles. Recently, such twisted bilayer graphene (tBLG) with the first magic angle twist was reported to exhibit correlated insulating state and superconductivity, where the presence of the flat miniband in the system is thought to be essential for the emergence of these ordered phases in the transport measurements. Tunneling spectroscopy and electronic compressibility measurements in tBLG have revealed a van Hove singularity that is consistent with the presence of the flat miniband. However, a direct observation of the flat dispersion in the momentum-space of such moire miniband in tBLG is still elusive. Here, we report the visualization of the flat moire miniband by using angle-resolved photoemission spectroscopy with nanoscale resolution (nanoARPES). The high spatial resolution in nanoARPES enabled the measurement of the local electronic structure of the tBLG. We clearly demonstrate the existence of the flat moire band near the charge neutrality for tBLG close to the magic angle at room temperature.

cond-mat.mes-hall↗

arXiv2017

Short-Channel Field Effect Transistors with 9-Atom and 13-Atom wide Graphene Nanoribbons

Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap of these GNRs have prevented the fabrication of devices with the desired performance and switching behaviour. Here, by fabricating short channel (Lch ~20 nm) devices with a thin, high-k gate dielectric and a 9-atom wide (0.95 nm) armchair GNR as the channel material, we demonstrate FETs with high on-current (Ion >1 uA at Vd = -1 V) and high Ion/Ioff ~10^5 at room temperature. We find that the performance of these devices is limited by tunnelling through the Schottky barrier (SB) at the contacts and we observe an increase in the transparency of the barrier by increasing the gate field near the contacts. Our results thus demonstrate successful fabrication of high performance short-channel FETs with bottom-up synthesized armchair GNRs.

cond-mat.mes-hall↗

arXiv2016

Evidence of electronic cloaking from chiral electron transport in bilayer graphene nanostructures

The coupling of charge carrier motion and pseudospin via chirality for massless Dirac fermions in monolayer graphene has generated dramatic consequences, such as the unusual quantum Hall effect and Klein tunneling. In bilayer graphene, charge carriers are massive Dirac fermions with a finite density of states at zero energy. Because of their non-relativistic nature, massive Dirac fermions can provide an even better test bed with which to clarify the importance of chirality in transport measurement than massless Dirac fermions in monolayer graphene. Here, we report an electronic cloaking effect as a manifestation of chirality by probing phase coherent transport in chemical-vapor-deposited bilayer graphene. Conductance oscillations with different periodicities were observed on extremely narrow bilayer graphene heterojunctions through electrostatic gating. Using a Fourier analysis technique, we identified the origin of each individual interference pattern. Importantly, the electron waves on the two sides of the potential barrier can be coupled through the evanescent waves inside the barrier, making the confined states underneath the barrier invisible to electrons. These findings provide direct evidence for the electronic cloaking effect and hold promise for the realization of pseudospintronics based on bilayer graphene.

cond-mat.mes-hall↗

arXiv2012

Flexible and Transparent All-Graphene Circuits for Quaternary Digital Modulations

In modern communication system, modulation is a key function that embeds the baseband signal (information) into a carrier wave so that it can be successfully broadcasted through a medium such as air or cables. A flexible signal modulation scheme is hence essential to wide range of applications based on flexible electronics. Here we report a fully bendable all-graphene modulator circuit with the capability to encode a carrier signal with quaternary digital information for the first time. By exploiting the ambipolarity and the nonlinearity in a graphene transistor, we demonstrated two types of quaternary modulation schemes: 4-ary amplitude-shift keying (4-ASK) and quadrature phase-shift keying (QPSK). Remarkably, 4-ASK and QPSK can be realized with just 1 and 2 all-graphene transistors, respectively, representing a drastic reduction in circuit complexity when compared with conventional digital modulators. In addition, the circuit is not only flexible but also highly transparent (~95% transmittance) owing to their all-graphene design with every component (channel, interconnects, load resistor, and source/drain/gate electrodes) fabricated from graphene films. Taken together, these results represent a significant step toward achieving a high speed communication system that can be monolithically integrated on a flexible and transparent platform.

cond-mat.mtrl-sci↗

arXiv2012

Evidence for Extraction of Photoexcited Hot Carriers from Graphene

We report evidence of nonequilibrium hot carriers extraction from graphene by gate-dependent photocurrent study. Scanning photocurrent excited by femtosecond pulse laser shows unusual gate dependence compared with continuous wave (CW) laser excitation. Power dependence studies further confirm that the photocarriers extracted at the metal/graphene contact are nonequilibrium hot carriers. Hot carrier extraction is found to be most efficient near the Dirac point where carrier lifetime reaches maximum. These observations not only provide evidence of hot carrier extraction from graphene, but also open the door for graphene based hot carrier optoelectronics.

cond-mat.mes-hall↗

arXiv2011

Homogeneous bilayer graphene film based flexible transparent conductor

Graphene is considered a promising candidate to replace conventional transparent conductors due to its low opacity, high carrier mobility and flexible structure. Multi-layer graphene or stacked single layer graphenes have been investigated in the past but both have their drawbacks. The uniformity of multi-layer graphene is still questionable, and single layer graphene stacks require many transfer processes to achieve sufficiently low sheet resistance. In this work, bilayer graphene film grown with low pressure chemical vapor deposition was used as a transparent conductor for the first time. The technique was demonstrated to be highly efficient in fabricating a conductive and uniform transparent conductor compared to multi-layer or single layer graphene. Four transfers of bilayer graphene yielded a transparent conducting film with a sheet resistance of 180 Ω_{\square} at a transmittance of 83%. In addition, bilayer graphene films transferred onto plastic substrate showed remarkable robustness against bending, with sheet resistance change less than 15% at 2.14% strain, a 20-fold improvement over commercial indium oxide films.

cond-mat.mes-hall↗

arXiv2010

Wafer Scale Homogeneous Bilayer Graphene Films by Chemical Vapor Deposition

The discovery of electric field induced bandgap opening in bilayer graphene opens new door for making semiconducting graphene without aggressive size scaling or using expensive substrates. However, bilayer graphene samples have been limited to um size scale thus far, and synthesis of wafer scale bilayer graphene posts tremendous challenge. Here we report homogeneous bilayer graphene films over at least 2 inch x 2 inch area, synthesized by chemical vapor deposition on copper foil and subsequently transferred to arbitrary substrates. The bilayer nature of graphene film is verified by Raman spectroscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM). Importantly, spatially resolved Raman spectroscopy confirms a bilayer coverage of over 99%. The homogeneity of the film is further supported by electrical transport measurements on dual-gate bilayer graphene transistors, in which bandgap opening is observed in 98% of the devices.

cond-mat.mtrl-sci↗