arXiv subjects

Kyunghun Han

Publications and source records attributed to Kyunghun Han.

7 recordsLinked to original sources

arXiv2025

Integrated broadband optical isolator via dynamic rotating destructive interference

Photonic integrated circuits route and shape light on a chip, but back-reflections feed back into coherent on-chip lasers, destabilizing operation and corrupting signals. Robust operation requires an integrated optical isolator that strongly suppresses backward propagation while maintaining low-loss, broadband forward transmission. However, prior on-chip isolators rely on magneto-optic materials or resonance-based filters, which respectively demand non-standard processes or inherently constrain bandwidth. Here, we propose and experimentally demonstrate a traveling-wave optical isolator without magnetic materials or resonant elements. By driving four parallel optical channels with periodic RF waves, we realize dynamic rotating destructive interference that continuously cancels backward-propagating light while leaving forward-propagating light unaffected. We achieve about 30 dB isolation at a wavelength of 789.7 nm and maintain over 24 dB isolation across an approximately 30 nm bandwidth (770 nm to 800 nm), including >20 dB isolation for two simultaneous lasers within an approximately 10 nm wavelength window. This wavelength span covers key alkali atomic transitions, enabling strong suppression of feedback-induced frequency noise and laser instability in atomic spectroscopy, laser cooling, and locking applications. We demonstrate a practical, broadband on-chip isolator applicable from the visible to the near-infrared, which is a crucial step toward fully integrated photonic platforms.

physics.optics↗

arXiv2024

Low-power, agile electro-optic frequency comb spectrometer for integrated sensors

Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceleration sensors. The chirped comb process allows for ultralow radiofrequency drive voltages, which are as much as seven orders of magnitude less than the lowest found in the literature and are generated using a chip-scale, microcontroller-driven direct digital synthesizer. The on-chip comb spectrometer is able to simultaneously interrogate both an on-chip temperature sensor and an off-chip, microfabricated optomechanical accelerometer with cutting-edge sensitivities of $\approx 5\ μ \mathrm{K} \cdot \mathrm{Hz}^{-1/2}$ and $\approx 130\ μ\mathrm{m} \cdot \mathrm{s}^{-2} \cdot \mathrm{Hz}^{-1/2}$, respectively. This platform is compatible with a broad range of existing photonic integrated circuit technologies, where its combination of frequency agility and ultralow radiofrequency power requirements are expected to have applications in fields such as quantum science and optical computing.

physics.optics↗

arXiv2023

Bound-state-in-continuum guided modes in a multilayer electro-optically active photonic integrated circuit platform

Bound states in the continuum (BICs) are localized states existing within a continuous spectrum of delocalized waves. Emerging multilayer photonic integrated circuit (PIC) platforms allow implementation of low index 1D guided modes within a high-index 2D slab mode continuum; however, conventional wisdom suggests that this always leads to large radiation losses. Here we demonstrate low-loss BIC guided modes for multiple mode polarizations and spatial orders in single- and multi-ridge low-index waveguides within a two-layer heterogeneously integrated electro-optically active photonic platform. The transverse electric (TE) polarized quasi-BIC guided mode with low, <1.4 dB/cm loss enables a Mach-Zehnder electro-optic amplitude modulator comprising a single straight Si3N4 ridge waveguide integrated with a continuous LiNbO3 slab layer. The abrupt optical transitions at the edges of the slab function as compact and efficient directional couplers eliminating the need for additional components. The modulator exhibits a low insertion loss of 2.3 dB and a high extinction ratio of 25 dB. The developed general theoretical model may enable innovative BIC-based approaches for important PIC functions, such as agile spectral filtering and switching, and may suggest new photonic architectures for quantum and neural network applications based on controlled interactions between multiple guided and delocalized modes.

physics.optics↗

arXiv2020

Controlling light emission by engineering atomic geometries in silicon photonics

By engineering atomic geometries composed of nearly 1000 atomic segments embedded in micro-resonators we observe Bragg resonances induced by the atomic lattice at the telecommunication wavelength. The geometrical arrangement of erbium atoms into a lattice inside a silicon nitride microring resonator reduces the scattering loss at a wavelength commensurate with the lattice. We confirm dependency of light emission to the atomic positions and lattice spacing and also observe Fano interference between resonant modes in the system.

physics.app-ph↗

arXiv2018

Controlling evanescent waves using silicon photonic all-dielectric metamaterials for dense integration

Ultra-compact, densely integrated optical components manufactured on a CMOS-foundry platform are highly desirable for optical information processing and electronic-photonic co-integration. However, the large spatial extent of evanescent waves arising from nanoscale confinement, ubiquitous in silicon photonic devices, causes significant cross-talk and scattering loss. Here, we demonstrate that anisotropic all-dielectric metamaterials open a new degree of freedom in total internal reflection to shorten the decay length of evanescent waves. We experimentally show the reduction of cross-talk by greater than 30 times and the bending loss by greater than 3 times in densely integrated, ultra-compact photonic circuit blocks. Our prototype all-dielectric metamaterial-waveguide achieves a low propagation loss of approximately 3.7 dB/cm, comparable to those of silicon strip waveguides. Our approach marks a departure from interference-based confinement as in photonic crystals or slot waveguides, which utilize nanoscale field enhancement. Its ability to suppress evanescent waves without substantially increasing the propagation loss shall pave the way for all-dielectric metamaterial-based dense integration.

physics.optics↗

arXiv2018

High-dimensional frequency-bin entangled photons in an optical microresonator on a chip

Quantum frequency combs from chip-scale integrated sources are promising candidates for scalable and robust quantum information processing (QIP). However, to use these quantum combs for frequency domain QIP, demonstration of entanglement in the frequency basis, showing that the entangled photons are in a coherent superposition of multiple frequency bins, is required. We present a verification of qubit and qutrit frequency-bin entanglement using an on-chip quantum frequency comb with 40 mode pairs, through a two-photon interference measurement that is based on electro-optic phase modulation. Our demonstrations provide an important contribution in establishing integrated optical microresonators as a source for high-dimensional frequency-bin encoded quantum computing, as well as dense quantum key distribution.

quant-ph↗

arXiv2016

Frequency Comb Generation in 300 nm Thick SiN Concentric-Racetrack-Resonators: Overcoming the Material Dispersion Limit

Kerr nonlinearity based frequency combs and solitons have been generated from on-chip optical microresonators with high quality factors and global or local anomalous dispersion. However, fabrication of such resonators usually requires materials and/or processes that are not standard in semiconductor manufacturing facilities. Moreover, in certain frequency regimes such as visible and ultra-violet, the large normal material dispersion makes it extremely difficult to achieve anomalous dispersion. Here we present a concentric racetrack-shaped resonator that achieves anomalous dispersion in a 300 nm thick silicon nitride film, suitable for semiconductor manufacturing but previously thought to result only in waveguides with high normal dispersion, a high intrinsic Q of 1.5 million, and a novel mode-selective coupling scheme that allows coherent combs to be generated. We also provide evidence suggestive of soliton-like pulse formation in the generated comb. Our method can achieve anomalous dispersion over moderately broad bandwidth for resonators at almost any wavelength while still maintaining material and process compatibility with high-volume semiconductor manufacturing.

physics.optics↗