SearcharxivSearch

arXiv subjects

Kyungjoo Noh

Publications and source records attributed to Kyungjoo Noh.

At least 19 recordsLinked to original sources

Dissipatively Stabilized 0-n Fock Qubits for Noise-Biased Quantum Computing

Noise-biased qubits have bit-flip errors that are exponentially suppressed relative to phase-flip errors, and offer a promising route toward fault-tolerant quantum computing. However, this bias can be compromised during gate operations with non-biased control qubits. To address this limitation, we propose a "0-n" Fock qubit architecture that maintains the noise bias by encoding information in the ground state and n-th excited state of a nonlinear multi-level system, such as a transmon. This encoding is achieved via a dissipative stabilization that acts as decay and gain for lower and upper intermediate levels, respectively. We first analytically demonstrate that bit-flip errors are exponentially suppressed with the number of levels. Then, we present a practical implementation using a multi-mode lossy filter to achieve the frequency-selective dissipation. Finally, we numerically demonstrate that bit-flip probabilities approaching $10^{-8}$ are achievable for controlled-X gates on cat qubits using the 0-n qubit as an ancilla with $n \geq 9$ (i.e. ten or more levels), for realistic experimental parameters. Building on this, we simulate syndrome extraction in a repetition code, achieving logical error rates in the megaquop regime with only a distance of $d=9$.

quant-ph

Bias-preserving cat-cat CNOT gate via vacuum-conditional beam-splitter

Cat qubits can exhibit strong noise bias due to their exponentially enhanced bit-flip times and only polynomially reduced phase-flip times with increasing photon number, which makes them attractive candidates for hardware-efficient quantum error correction. However, it is difficult to maintain this strong noise bias in logical operations such as CNOT gates between cats. Here, we propose a coherent CNOT gate scheme between two dissipative cats that preserves the exponential noise bias. The proposed gate relies only on unitary operations, which avoids the non-idealities associated with many existing gate schemes that rely on engineered dissipations. Assuming good component lifetimes and precise nonlinearity engineering, the proposed gate can enable logical memory in the megaquop regime (logical error rates < 10^-6) with a distance-7 repetition code consisting of 13 cat qubits.

quant-ph

Classical simulation of noisy random circuits from exponential decay of correlation

We study the classical simulability of noisy random quantum circuits under general noise models. While various classical algorithms for simulating noisy random circuits have been proposed, many of them rely on the anticoncentration property, which can fail when the circuit depth is small or under realistic noise models. We propose a new approach based on the exponential decay of conditional mutual information (CMI), a measure of tripartite correlations. We prove that exponential CMI decay enables a classical algorithm to sample from noisy random circuits -- in polynomial time for one dimension and quasi-polynomial time for higher dimensions -- even when anticoncentration breaks down. To this end, we show that exponential CMI decay makes the circuit depth effectively shallow, and it enables efficient classical simulation for sampling. We further provide extensive numerical evidence that exponential CMI decay is a universal feature of noisy random circuits across a wide range of noise models. Our results establish CMI decay, rather than anticoncentration, as the fundamental criterion for classical simulability, and delineate the boundary of quantum advantage in noisy devices.

quant-ph

Viewing protected superconducting qubits through the lens of the cat qubit

We draw analogies between protected superconducting qubits and bosonic qubits by studying the fluxonium Hamiltonian in its Fock basis. The mean-field phase diagram of fluxonium (at the sweet spot) is identified, with a region in parameter space that is characterized by $\mathbb{Z}_2$-symmetry-broken ground states. In the heavy fluxonium limit, these ground states are well approximated by squeezed coherent states in a Fock basis (corresponding to persistent current states with definite flux but indefinite charge), and simple expressions are provided for them in terms of the circuit parameters. We study the noise bias in fluxonium via a universal Lindblad master equation and find that the bit-flip rate is exponentially small in $E_j/(k_B T)$, while the phase-flip rate does not get worse with this ratio. Analogous behavior is found in $\cos(2 θ)$ qubits. We describe cat-qubit-inspired bias-preserving $X$ and $CX$ gates for fluxonium. We discuss first steps towards generating an Ising interaction between protected superconducting qubits on a two-dimensional lattice, with the aim of achieving a passive quantum memory by coupling a static Hamiltonian to a generic thermal bath.

quant-ph

Cross-resonance control of an oscillator with an auxiliary fluxonium qubit

The conditional displacement (CD) gate between an oscillator and a discrete-variable auxiliary qubit plays a key role in quantum information processing tasks, such as enabling universal control of the oscillator and longitudinal readout of the qubit. However, the gate is unprotected against the propagation of auxiliary qubit decay errors and hence not fault-tolerant. Here, we propose a CD gate scheme with fluxonium as the auxiliary qubit, which has been experimentally demonstrated to have a large noise bias and millisecond-level lifetimes. The proposed gate is applied cross-resonantly by modulating the external flux of the fluxonium at the frequency of the target oscillator, which requires minimal hardware overhead and does not increase sensitivity to decoherence mechanisms like dephasing. We further provide a perturbative description of the gate mechanism and identify the error budget. Additionally, we develop an approximate procedure for choosing device and gate parameters that optimizes gate performance. Following the procedure for multiple sets of fluxonium parameters from the literature, we numerically demonstrate CD gates with unitary fidelity exceeding 99.9% and gate times of hundreds of nanoseconds.

quant-ph

Exploring the quantum capacity of a Gaussian random displacement channel using Gottesman-Kitaev-Preskill codes and maximum likelihood decoding

Determining the quantum capacity of a noisy quantum channel is an important problem in the field of quantum communication theory. In this work, we consider the Gaussian random displacement channel $N_σ$, a type of bosonic Gaussian channels relevant in various bosonic quantum information processing systems. In particular, we attempt to make progress on the problem of determining the quantum capacity of a Gaussian random displacement channel by analyzing the error-correction performance of several families of multi-mode Gottesman-Kitaev-Preskill (GKP) codes. In doing so we analyze the surface-square GKP codes using an efficient and exact maximum likelihood decoder (MLD) up to a large code distance of $d=39$. We find that the error threshold of the surface-square GKP code is remarkably close to $σ=1/\sqrt{e}\simeq 0.6065$ at which the best-known lower bound of the quantum capacity of $N_σ$ vanishes. We also analyze the performance of color-hexagonal GKP codes up to a code distance of $d=13$ using a tensor-network decoder serving as an approximate MLD. By focusing on multi-mode GKP codes that encode just one logical qubit over multiple bosonic modes, we show that GKP codes can achieve non-zero quantum state transmission rates for a Gaussian random displacement channel $N_σ$ at larger values of $σ$ than previously demonstrated. Thus our work reduces the gap between the quantum communication theoretic bounds and the performance of explicit bosonic quantum error-correcting codes in regards to the quantum capacity of a Gaussian random displacement channel.

quant-ph

Preserving phase coherence and linearity in cat qubits with exponential bit-flip suppression

Cat qubits, a type of bosonic qubit encoded in a harmonic oscillator, can exhibit an exponential noise bias against bit-flip errors with increasing mean photon number. Here, we focus on cat qubits stabilized by two-photon dissipation, where pairs of photons are added and removed from a harmonic oscillator by an auxiliary, lossy buffer mode. This process requires a large loss rate and strong nonlinearities of the buffer mode that must not degrade the coherence and linearity of the oscillator. In this work, we show how to overcome this challenge by coloring the loss environment of the buffer mode with a multi-pole filter and optimizing the circuit to take into account additional inductances in the buffer mode. Using these techniques, we achieve near-ideal enhancement of cat-qubit bit-flip times with increasing photon number, reaching over $0.1$ seconds with a mean photon number of only $4$. Concurrently, our cat qubit remains highly phase coherent, with phase-flip times corresponding to an effective lifetime of $T_{1,\text{eff}} \simeq 70$ $μ$s, comparable with the bare oscillator lifetime. We achieve this performance even in the presence of an ancilla transmon, used for reading out the cat qubit states, by engineering a tunable oscillator-ancilla dispersive coupling. Furthermore, the low nonlinearity of the harmonic oscillator mode allows us to perform pulsed cat-qubit stabilization, an important control primitive, where the stabilization can remain off for a significant fraction (e.g., two thirds) of a $3~\mathrm{μs}$ cycle without degrading bit-flip times. These advances are important for the realization of scalable error-correction with cat qubits, where large noise bias and low phase-flip error rate enable the use of hardware-efficient outer error-correcting codes.

quant-ph

Self-correcting GKP qubit and gates in a driven-dissipative circuit

We show that a self-correcting GKP qubit can be realized with a high-impedance LC circuit coupled to a resistor and a Josephson junction via a controllable switch. When activating the switch in a particular stepwise pattern, the resonator relaxes into a subspace of GKP states that encode a protected qubit. Under continued operation, the resistor dissipatively error-corrects the qubit against bit flips and decoherence by absorbing noise-induced entropy. We show that this leads to an exponential enhancement of coherence time (T1 and T2), even in the presence of extrinsic noise, imperfect control, and device parameter variations. We show the qubit supports exponentially robust single-qubit Clifford gates, implemented via appropriate control of the switch, and readout/initialization via supercurrent measurement. The qubit's self-correcting properties allows it to operate at ~1K temperatures and resonator Q factors down to ~1000 for realistic parameters, and make it amenable to parallel control through global control signals. We discuss how the effects of quasiparticle poisoning -- potentially, though not necessarily, a limiting factor -- might be mitigated. We finally demonstrate that a related device supports a self-correcting magic T gate.

cond-mat.mes-hall

Hardware-efficient quantum error correction via concatenated bosonic qubits

In order to solve problems of practical importance, quantum computers will likely need to incorporate quantum error correction, where a logical qubit is redundantly encoded in many noisy physical qubits. The large physical-qubit overhead typically associated with error correction motivates the search for more hardware-efficient approaches. Here, using a microfabricated superconducting quantum circuit, we realize a logical qubit memory formed from the concatenation of encoded bosonic cat qubits with an outer repetition code of distance $d=5$. The bosonic cat qubits are passively protected against bit flips using a stabilizing circuit. Cat-qubit phase-flip errors are corrected by the repetition code which uses ancilla transmons for syndrome measurement. We realize a noise-biased CX gate which ensures bit-flip error suppression is maintained during error correction. We study the performance and scaling of the logical qubit memory, finding that the phase-flip correcting repetition code operates below threshold, with logical phase-flip error decreasing with code distance from $d=3$ to $d=5$. Concurrently, the logical bit-flip error is suppressed with increasing cat-qubit mean photon number. The minimum measured logical error per cycle is on average $1.75(2)\%$ for the distance-3 code sections, and $1.65(3)\%$ for the longer distance-5 code, demonstrating the effectiveness of bit-flip error suppression throughout the error correction cycle. These results, where the intrinsic error suppression of the bosonic encodings allows us to use a hardware-efficient outer error correcting code, indicate that concatenated bosonic codes are a compelling paradigm for reaching fault-tolerant quantum computation.

quant-ph

Frequency-noise-insensitive universal control of Kerr-cat qubits

We theoretically study the influence of frequency uncertainties on the operation of a Kerr-cat qubit. As the mean photon number increases, Kerr-cat qubits provide an increasing level of protection against phase errors induced by unknown frequency shifts during idling and X rotations. However, realizing rotations about the other principal axes (e.g., Y and Z axes) while preserving robustness is nontrivial. To address this challenge, we propose a universal set of gate schemes which circumvents the tradeoff between protection and controllability in Kerr-cat qubits and retains robustness to unknown frequency shifts to at least first order. Assuming an effective Kerr oscillator model, we theoretically and numerically analyze the robustness of elementary gates on Kerr-cat qubits, with special focus on gates along nontrivial rotation axes. An appealing application of this qubit design would include tunable superconducting platforms, where the induced protection against frequency noise would allow for a more flexible choice of operating point and thus the potential mitigation of the impact of spurious two-level systems.

quant-ph

Performance and achievable rates of the Gottesman-Kitaev-Preskill code for pure-loss and amplification channels

Quantum error correction codes protect information from realistic noisy channels and lie at the heart of quantum computation and communication tasks. Understanding the optimal performance and other information-theoretic properties, such as the achievable rates, of a given code is crucial, as these factors determine the fundamental limits imposed by the encoding in conjunction with the noise channel. Here, we use the transpose channel to analytically obtain the near-optimal performance of any Gottesman-Kitaev-Preskill (GKP) code under pure loss and pure amplification. We present rigorous connections between GKP code's near-optimal performance and its dual lattice geometry and average input energy. With no energy constraint, we show that when $\vert\fracτ{1 - τ}\vert$ is an integer, specific families of GKP codes simultaneously achieve the loss and amplification capacity. $τ$ is the transmissivity (gain) for loss (amplification). Our results establish GKP code as the first structured bosonic code family that achieves the capacity of loss and amplification.

quant-ph

Hybrid cat-transmon architecture for scalable, hardware-efficient quantum error correction

Dissipative cat qubits are a promising physical platform for quantum computing, since their large noise bias can enable more hardware-efficient quantum error correction. In this work we theoretically study the long-term prospects of a hybrid cat-transmon quantum computing architecture where dissipative cat qubits play the role of data qubits, and error syndromes are measured using ancillary transmon qubits. The cat qubits' noise bias enables more hardware-efficient quantum error correction, and the use of transmons allows for practical, high-fidelity syndrome measurement. While correction of the dominant cat Z errors with a repetition code has recently been demonstrated in experiment, here we show how the architecture can be scaled beyond a repetition code. In particular, we propose a cat-transmon entangling gate that enables the correction of residual cat X errors in a thin rectangular surface code, so that logical error can be arbitrarily suppressed by increasing code distance. We numerically estimate logical memory performance, finding significant overhead reductions in comparison to architectures without biased noise. For example, with current state-of-the-art coherence, physical error rates of $10^{-3}$ and noise biases in the range $10^{3} - 10^{4}$ are achievable. With this level of performance, the qubit overhead required to reach algorithmically-relevant logical error rates with the cat-transmon architecture matches that of an unbiased-noise architecture with physical error rates in the range $10^{-5} - 10^{-4}$.

quant-ph

Demonstrating a long-coherence dual-rail erasure qubit using tunable transmons

Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon $T_1$ errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability $p_\text{erasure} = 2.19(2)\times 10^{-3}$ per gate while the residual errors are $\sim 40$ times lower. We further demonstrate mid-circuit detection of erasure errors while introducing $< 0.1\%$ dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction.

quant-ph

Closest lattice point decoding for multimode Gottesman-Kitaev-Preskill codes

Quantum error correction (QEC) plays an essential role in fault-tolerantly realizing quantum algorithms of practical interest. Among different approaches to QEC, encoding logical quantum information in harmonic oscillator modes has been shown to be promising and hardware efficient. In this work, we study multimode Gottesman-Kitaev-Preskill (GKP) codes, encoding a qubit in many oscillators, through a lattice perspective. In particular, we implement a closest point decoding strategy for correcting random Gaussian shift errors. For decoding a generic multimode GKP code, we first identify its corresponding lattice followed by finding the closest lattice point in its symplectic dual lattice to a candidate shift error compatible with the error syndrome. We use this method to characterize the error correction capabilities of several known multimode GKP codes, including their code distances and fidelities. We also perform numerical optimization of multimode GKP codes up to ten modes and find three instances (with three, seven and nine modes) with better code distances and fidelities compared to the known GKP codes with the same number of modes. While exact closest point decoding incurs exponential time cost in the number of modes for general unstructured GKP codes, we give several examples of structured GKP codes (i.e., of the repetition-rectangular GKP code types) where the closest point decoding can be performed exactly in linear time. For the surface-GKP code, we show that the closest point decoding can be performed exactly in polynomial time with the help of a minimum-weight-perfect-matching algorithm (MWPM). We show that this MWPM closest point decoder improves both the fidelity and the noise threshold of the surface-GKP code to 0.602 compared to the previously studied MWPM decoder assisted by log-likelihood analog information which yields a noise threshold of 0.599.

quant-ph

Stabilizing a Bosonic Qubit using Colored Dissipation

Protected qubits such as the 0-$π$ qubit, and bosonic qubits including cat qubits and GKP qubits offer advantages for fault-tolerance. Some of these protected qubits (e.g., 0-$π$ qubit and Kerr cat qubit) are stabilized by Hamiltonians which have (near-)degenerate ground state manifolds with large energy-gaps to the excited state manifolds. Without dissipative stabilization mechanisms the performance of such energy-gap-protected qubits can be limited by leakage to excited states. Here, we propose a scheme for dissipatively stabilizing an energy-gap-protected qubit using colored (i.e., frequency-selective) dissipation without inducing errors in the ground state manifold. Concretely we apply our colored dissipation technique to Kerr cat qubits and propose colored Kerr cat qubits which are protected by an engineered colored single-photon loss. When applied to the Kerr cat qubits our scheme significantly suppresses leakage-induced bit-flip errors (which we show are a limiting error mechanism) while only using linear interactions. Beyond the benefits to the Kerr cat qubit we also show that our frequency-selective loss technique can be applied to a broader class of protected qubits.

quant-ph

Low overhead fault-tolerant quantum error correction with the surface-GKP code

Fault-tolerant quantum error correction is essential for implementing quantum algorithms of significant practical importance. In this work, we propose a highly effective use of the surface-GKP code, i.e., the surface code consisting of bosonic GKP qubits instead of bare two-dimensional qubits. In our proposal, we use error-corrected two-qubit gates between GKP qubits and introduce a maximum likelihood decoding strategy for correcting shift errors in the two-GKP-qubit gates. Our proposed decoding reduces the total CNOT failure rate of the GKP qubits, e.g., from $0.87\%$ to $0.36\%$ at a GKP squeezing of $12$dB, compared to the case where the simple closest-integer decoding is used. Then, by concatenating the GKP code with the surface code, we find that the threshold GKP squeezing is given by $9.9$dB under the the assumption that finite-squeezing of the GKP states is the dominant noise source. More importantly, we show that a low logical failure rate $p_{L} < 10^{-7}$ can be achieved with moderate hardware requirements, e.g., $291$ modes and $97$ qubits at a GKP squeezing of $12$dB as opposed to $1457$ bare qubits for the standard rotated surface code at an equivalent noise level (i.e., $p=0.36\%$). Such a low failure rate of our surface-GKP code is possible through the use of space-time correlated edges in the matching graphs of the surface code decoder. Further, all edge weights in the matching graphs are computed dynamically based on analog information from the GKP error correction using the full history of all syndrome measurement rounds. We also show that a highly-squeezed GKP state of GKP squeezing $\gtrsim 12$dB can be experimentally realized by using a dissipative stabilization method, namely, the Big-small-Big method, with fairly conservative experimental parameters. Lastly, we introduce a three-level ancilla scheme to mitigate ancilla decay errors during a GKP state preparation.

quant-ph

Building a fault-tolerant quantum computer using concatenated cat codes

We present a comprehensive architectural analysis for a proposed fault-tolerant quantum computer based on cat codes concatenated with outer quantum error-correcting codes. For the physical hardware, we propose a system of acoustic resonators coupled to superconducting circuits with a two-dimensional layout. Using estimated physical parameters for the hardware, we perform a detailed error analysis of measurements and gates, including CNOT and Toffoli gates. Having built a realistic noise model, we numerically simulate quantum error correction when the outer code is either a repetition code or a thin rectangular surface code. Our next step toward universal fault-tolerant quantum computation is a protocol for fault-tolerant Toffoli magic state preparation that significantly improves upon the fidelity of physical Toffoli gates at very low qubit cost. To achieve even lower overheads, we devise a new magic-state distillation protocol for Toffoli states. Combining these results together, we obtain realistic full-resource estimates of the physical error rates and overheads needed to run useful fault-tolerant quantum algorithms. We find that with around 1,000 superconducting circuit components, one could construct a fault-tolerant quantum computer that can run circuits which are currently intractable for classical computers. Hardware with 18,000 superconducting circuit components, in turn, could simulate the Hubbard model in a regime beyond the reach of classical computing.

quant-ph

A fault-tolerant continuous-variable measurement-based quantum computation architecture

Continuous variable measurement-based quantum computation on cluster states has in recent years shown great potential for scalable, universal, and fault-tolerant quantum computation when combined with the Gottesman-Kitaev-Preskill (GKP) code and quantum error correction. However, no complete fault-tolerant architecture exists that includes everything from cluster state generation with finite squeezing to gate implementations with realistic noise and error correction. In this work, we propose a simple architecture for the preparation of a cluster state in three dimensions in which gates by gate teleportation can be efficiently implemented. To accommodate scalability, we propose architectures that allow for both spatial and temporal multiplexing, with the temporal encoded version requiring as little as two squeezed light sources. Due to its three-dimensional structure, the architecture supports topological qubit error correction, while GKP error correction is efficiently realized within the architecture by teleportation. To validate fault-tolerance, the architecture is simulated using surface-GKP codes, including noise from GKP-states as well as gate noise caused by finite squeezing in the cluster state. We find a fault-tolerant squeezing threshold of 12.7 dB with room for further improvement.

quant-ph