arXiv subjects

L. A. Bianchi

Publications and source records attributed to L. A. Bianchi.

9 recordsLinked to original sources

arXiv2026

Implementation of frequency-correlated noise in CMB component separation: Method, Validation, and Early Applications

Parametric component separation methods used in cosmic microwave background (CMB) analyses commonly assume instrumental noise to be uncorrelated between frequency channels. This approximation may become insufficient for experiments whose design naturally introduces cross-channel correlations, such as interferometric or multi-band bolometric systems. This work aims to provide a consistent framework to include frequency-correlated noise in Commander2 and to quantify its impact on component separation in controlled and instrument-motivated simulations. We generalized the amplitude sampling of the Commander2 framework to consistently handle dense frequency-frequency noise covariance matrices, modifying the likelihood evaluation and parallel architecture. The implementation is validated on low-resolution simulations of a simplified CMB-S4-like configuration. We applied the generalized framework to instrument-motivated simulations of the QUBIC bolometric interferometer, using representative noise models derived from end-to-end simulations. Validation tests show excellent convergence and agreement between sampled parameters and analytical maximum-likelihood estimates. Accounting for frequency correlations reduces the width of the maximum-likelihood residual distributions by up to 8% on average, and up to 11% for individual parameters, relative to the diagonal-noise approximation. In QUBIC-based simulations, accounting for an anti-correlated noise produces posterior widths reduced by about 60%, while a positive-correlation test increases them by about 40%. This shows that neglecting cross-channel correlations can lead to incorrect posterior estimates in either direction. The generalized implementation presented here enables the Commander2 software to consistently propagate such correlations into parameter estimation, providing a framework for assessing their impact in future CMB analyses.

astro-ph.CO↗

arXiv2026

Fast and accurate bandpass integration of complex SEDs with neural networks

The paper presents a novel ML-based approach for fast and accurate bandpass integration of spectral energy distributions (SEDs). The non-locality of the integral operator involved guarantees the smoothness of the target function to be approximated, making it an excellent use-case for neural networks. The computational method developed for this work has been wrapped within pyfine (FINE: Fast Function Interpolation via NEural NEtworks). This new Python package makes the relevant code available and easy to use by everyone within the scientific community. The method is demonstrated with two different bandpass integration test cases with 3 and 9 free parameters, respectively, where both accuracy and computational performance are analyzed. The results show that the method is capable of predicting values of the bandpass integral with maximum relative residuals as low as 0.002% and 0.08% respectively, within the sampled region of the parameter space, fast run times, and very little memory overhead. The usage of pyfine is especially effective when the computation of an SED functional form, given a set of values for its free parameters, is expensive. However, already in the first of the two test cases, where a simple modified black body SED was employed, the neural network's measured run times resulted faster by two orders of magnitudes than an optimized multithreaded version of the ``brute force'' exact calculation of the integral.

astro-ph.IM↗

arXiv2026

Cosmoglobe DR2. III. Improved modelling of zodiacal light with COBE-DIRBE through global Bayesian analysis

We present an improved zodiacal light (ZL) model for COBE-DIRBE derived through global Bayesian analysis within the Cosmoglobe Data Release 2 framework. The parametric form of the ZL model is inspired by the original DIRBE model by Kelsall et al. (K98), but the specific best-fit parameter values are re-derived using the combination of DIRBE Calibrated Individual Observations, Planck HFI sky maps, and WISE and Gaia compact object catalogs. Furthermore, the ZL parameters are fitted jointly with astrophysical parameters, such as thermal dust and starlight emission, and the new model takes into account excess radiation that appears stationary in solar-centric coordinates as reported in a companion paper. The relative differences between the predicted signals from K98 and our new model are $\lesssim 3\%$ in the 12 and 25 $μ$m channels over the full sky. The zero-levels of the cleaned DR2 maps are lower than those of the K98 ZL Subtracted Mission Average maps by $\sim 30$ kJy/sr at 1.25--3.5 $μ$m, which is larger than the entire predicted contribution from high-redshift galaxies to the Cosmic Infrared Background at the same wavelengths. At high Galactic latitudes, the total RMS of each DR2 map is lower than the corresponding DIRBE ZSMA map of $\sim$ 80 \% at wavelengths 4.9--25 $μ\mathrm{m}$. Still, obvious ZL residuals can be seen in several of the DR2 maps, and further work is required to mitigate these. Joint analysis with high-resolution full-sky surveys such as AKARI, IRAS, Planck HFI, and SPHEREx will be essential both to break key degeneracies in the current model and to determine whether the reported solar-centric excess radiation has a ZL or instrumental origin. Thus, while the results presented in this paper do redefine the state-of-the-art for DIRBE modelling, it also only represents the first among many steps toward a future optimal Bayesian ZL model. (abridged)

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. VI. Disentangling hot and cold thermal dust emission with Planck HFI

We present a four-component high-resolution model of thermal dust emission for microwave and sub-mm frequencies derived from Planck HFI, WHAM and Gaia. The resulting high-resolution model derived here forms the basis for the thermal dust model employed in the Cosmoglobe DR2 reanalysis of COBE-DIRBE. The four dust components are called ``cold dust'', ``hot dust'', ``nearby dust'', and ``Ha correlated dust'', respectively, and trace different physical environments. The spatial distributions of the nearby dust and Ha dust components are defined by the Edenhofer et al. Gaia 3D extinction model and the WHAM survey, respectively, while the hot and cold dust components are fit freely pixel-by-pixel to the Planck HFI data. We use a global parameter grid search coupled to an amplitude map Gibbs sampler to fit this model to Planck HFI data. In agreement with the companion low-resolution analysis, we find that the hot dust component is strongly correlated with the FIRAS Cii map, while the cold dust component is strongly correlated with the HI4PI Hi map. Despite its fewer degrees of freedom per pixel compared to the Planck 2015 legacy dust model, we find that this new model performs competitively in terms of overall residuals, capturing over 98% of the full-sky dust variance for all channels. When fitting a spatially varying 3-parameter MBB model to the new dust model with isotropic SEDs, we find very similar spatial distributions to those of the official Planck analysis, and this new model thus represents an economical decomposition of previously published spatially varying spectral parameter maps. We conclude that this new model represents both a statistically more efficient summary of thermal dust in the microwave and far-infrared regimes and a physically more realistic decomposition of the sky compared to the traditional 3-parameter MBB model. (abridged)

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. V. Spatial correlations between thermal dust and ionized carbon emission in Planck HFI and COBE-DIRBE

We fit five tracers of thermal dust emission to ten Planck HFI and COBE-DIRBE frequency maps between 353 GHz and 25 THz, aiming to map the relative importance of each physical host environment as a function of frequency and position on the sky. Four of these correspond to classic thermal dust tracers, namely H i (HI4PI), CO (Dame et al. 2001a), Hα (WHAM, Haffner et al. (2003a, 2016)), and dust extinction (Gaia; Edenhofer et al. 2024), while the fifth is ionized carbon (C ii) emission as observed by COBE- FIRAS. We jointly fit these five templates to each frequency channel through standard multi-variate linear regression. At frequencies higher than 1 THz, we find that the dominant tracer is in fact C ii, and above 10 THz this component accounts for almost the entire fitted signal; at frequencies below 1 THz, its importance is second only to H i. We further find that all five components are well described by a modified blackbody spectral energy density (SED) up to some component-dependent maximum frequency ranging between 1 and 5 THz. In this interpretation, the C ii-correlated component is the hottest among all five, with an effective temperature of about 25 K. The Hα component has a temperature of 18 K, and, unlike the other four, is observed in absorption rather than emission. Despite the simplicity of this model, which relies only on external templates coupled to spatially isotropic SEDs, we find that it captures 98 % of the full signal root mean squared (RMS) below 1 THz. This high efficiency suggests that spatial variations in the thermal dust SED, as for instance reported by Planck and other experiments, may be more economically modelled on large angular scales in terms of a spatial mixing of individually isotropic physical components.

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. VII. Towards a concordance model of large-scale thermal dust emission for microwave and infrared frequencies

We fit a four-component thermal dust model to COBE-DIRBE data between 3.5 and 240 micron within the global Bayesian end-to-end Cosmoglobe DR2 reanalysis. Following a companion analysis of Planck HFI, the four components of this model correspond to "hot dust", "cold dust", "nearby dust", and "Halpha correlated dust", respectively, and each component is modelled in terms of a fixed spatial template and a spatially isotropic spectral energy density (SED) defined by an overall free amplitude for each DIRBE channel. Except for the cold dust amplitude, which is only robustly detected in the 240 micron channel, we measure statistically significant template amplitudes for all components in all DIRBE channels between 12 and 240 micron. In the 3.5 and 4.9 micron channels, only the hot component is detected, while the 1.25 and 2.2 micron channels are too dominated by starlight emission to allow robust dust detections. The total number of DIRBE-specific degrees of freedom in this model is 25. Despite this low dimensionality, the resulting total SED agrees well with recent astrodust predictions. At both low and high frequencies, more than 95 % of the frequency map variance is captured by the model, while at 60 and 100 micron about 70 % of the signal variance is successfully accounted for. The hot dust component, which in a companion paper has been found to correlate strongly with C ii emission, has the highest absolute amplitude in all DIRBE frequency channels; in particular, at 3.5 micron, which is known to be dominated by polycyclic aromatic hydrocarbon emission, this component accounts for at least 80 % of the total signal. This analysis represents an important step towards establishing a joint concordance model of thermal dust emission applicable to both the microwave and infrared regimes.

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. IV. Modelling starlight in DIRBE with Gaia and WISE

We present a model of starlight emission in the Diffuse Infrared Background Explorer (DIRBE) data between 1.25 and 25$\,μ$m based on \textit{Gaia} and WISE measurements. We include two classes of compact objects, namely bright stars with individual spectral energy densities (SEDs) measured by \textit{Gaia}, and a combined diffuse background of dim point source emission. Of the 424\ 829 bright sources that we fit, the number of stars with a flux density detected by WISE at Galactic latitudes $|b|>20^{\circ}$ at more than $5\,σ$ is 94\,680, for an average of 1.36~stars per DIRBE beam area. For each star, we adopt physical parameters ($T_{\mathrm{eff}}$, $\log g$, and [M/H]) from \textit{Gaia}; use these to identify a best-fit effective SED with the PHOENIX stellar model library; convolve with the respective DIRBE bandpass; and fit an overall free amplitude per star within the Bayesian end-to-end \texttt{Cosmoglobe} DR2 framework. The contributions from faint sources are accounted for by coadding all 710\ 825\ 587 WISE sources not included as bright stars, and fit one single overall amplitude per DIRBE band. Based on this model we find that total star emission accounts for 91\,\% of the observed flux density at 2.2\,$μ$m; 54\,\% at 4.9$\,μ$m; and 1\,\% at 25\,$μ$m. As shown in companion papers, this new model is sufficiently accurate to support high-precision measurements of both the Cosmic Infrared Background monopole and zodiacal light emission in the three highest DIRBE frequencies.

astro-ph.CO↗

arXiv2023

Cosmoglobe DR1. III. First full-sky model of polarized synchrotron emission from all WMAP and Planck LFI data

We present the first model of full-sky polarized synchrotron emission that is derived from all WMAP and Planck LFI frequency maps. The basis of this analysis is the set of end-to-end reprocessed Cosmoglobe Data Release 1 sky maps presented in a companion paper, which have significantly lower instrumental systematics than the legacy products from each experiment. We find that the resulting polarized synchrotron amplitude map has an average noise rms of $3.2\,\mathrm{μK}$ at 30 GHz and $2^{\circ}$ FWHM, which is 30% lower than the recently released BeyondPlanck model that included only LFI+WMAP Ka-V data, and 29% lower than the WMAP K-band map alone. The mean $B$-to-$E$ power spectrum ratio is $0.40\pm0.02$, with amplitudes consistent with those measured previously by Planck and QUIJOTE. Assuming a power law model for the synchrotron spectral energy distribution, and using the $T$--$T$ plot method, we find a full-sky inverse noise-variance weighted mean of $β_{\mathrm{s}}=-3.07\pm0.07$ between Cosmoglobe DR1 K-band and 30 GHz, in good agreement with previous estimates. In summary, the novel Cosmoglobe DR1 synchrotron model is both more sensitive and systematically cleaner than similar previous models, and it has a more complete error description that is defined by a set of Monte Carlo posterior samples. We believe that these products are preferable over previous Planck and WMAP products for all synchrotron-related scientific applications, including simulation, forecasting and component separation.

astro-ph.CO↗

arXiv2023

Cosmoglobe DR1 results. I. Improved Wilkinson Microwave Anisotropy Probe maps through Bayesian end-to-end analysis

We present Cosmoglobe Data Release 1, which implements the first joint analysis of WMAP and Planck LFI time-ordered data, processed within a single Bayesian end-to-end framework. This framework builds directly on a similar analysis of the LFI measurements by the BeyondPlanck collaboration, and approaches the CMB analysis challenge through Gibbs sampling of a global posterior distribution, simultaneously accounting for calibration, mapmaking, and component separation. The computational cost of producing one complete WMAP+LFI Gibbs sample is 812 CPU-hr, of which 603 CPU-hrs are spent on WMAP low-level processing; this demonstrates that end-to-end Bayesian analysis of the WMAP data is computationally feasible. We find that our WMAP posterior mean temperature sky maps and CMB temperature power spectrum are largely consistent with the official WMAP9 results. Perhaps the most notable difference is that our CMB dipole amplitude is $3366.2 \pm 1.4\ \mathrm{μK}$, which is $11\ \mathrm{μK}$ higher than the WMAP9 estimate and $2.5\ σ$ higher than BeyondPlanck; however, it is in perfect agreement with the HFI-dominated Planck PR4 result. In contrast, our WMAP polarization maps differ more notably from the WMAP9 results, and in general exhibit significantly lower large-scale residuals. We attribute this to a better constrained gain and transmission imbalance model. It is particularly noteworthy that the W-band polarization sky map, which was excluded from the official WMAP cosmological analysis, for the first time appears visually consistent with the V-band sky map. Similarly, the long standing discrepancy between the WMAP K-band and LFI 30 GHz maps is finally resolved, and the difference between the two maps appears consistent with instrumental noise at high Galactic latitudes. All maps and the associated code are made publicly available through the Cosmoglobe web page.

astro-ph.CO↗