arXiv subjects

L. A. Ribeiro Júnior

Publications and source records attributed to L. A. Ribeiro Júnior.

7 recordsLinked to original sources

arXiv2024

On the mechanical, thermoelectric, and excitonic properties of Tetragraphene monolayer

Two-dimensional carbon allotropes have attracted much attention due to their extraordinary optoelectronic and mechanical properties, which can be exploited for energy conversion and storage applications. In this work, we use density functional theory simulations and semi-empirical methods to investigate the mechanical, thermoelectric, and excitonic properties of Tetrahexcarbon (also known as Tetragraphene). This quasi-2D carbon allotrope exhibits a combination of squared and hexagonal rings in a buckled shape. Our findings reveal that tetragraphene is a semiconductor material with a direct electronic bandgap of 2.66 eV. Despite the direct nature of the electronic band structure, this material has an indirect exciton ground state of 2.30 eV, which results in an exciton binding energy of 0.36 eV. At ambient temperature, we obtain that the lattice thermal conductivity for tetragraphene is approximately 118 W/mK. Young's modulus and the shear modulus of tetragraphene are almost isotropic, with maximum values of 286.0 N/m and 133.7 N/m, respectively, while exhibiting a very low anisotropic Poisson ratio value of 0.09.

cond-mat.mtrl-sci↗

arXiv2022

Dynamical Formation of Graphene and Graphane Nanoscrolls

Carbon nanoscrolls (CNSs) are nanomaterials with geometry resembling graphene layers rolled up into a spiral (papyrus-like) form. Effects of hydrogenation and temperature on the self-scrolling process of two nanoribbons interacting with a carbon nanotube (CNT) have been studied by molecular dynamics simulations for three configurations: (1) graphene/graphene/CNT; (2) graphene/graphane/CNT, and (3) graphane/graphane/CNT. Graphane refers to a fully hydrogenated graphene nanoribbon. Nanoscroll formation is observed for configurations (1) and (2) for temperatures 300-1000 K, while nanoribbons wrap CNT without nanoscroll formation for configuration (3).

cond-mat.mtrl-sci↗

arXiv2022

A Computational Study On the Mechanical Properties of Pentahexoctite Single-layer: Combining DFT and Classical Molecular Dynamics Simulations

Studies aimed at designing new allotropic forms of carbon have received much attention. Recently, a new 2D graphene-like allotrope named Pentahexoctite was theoretically proposed. Pentahexoctite has a metallic signature, and its structure consists of continuous 5-6-8 rings of carbon atoms with sp2 hybridization. Here, we carried out fully-atomistic computational simulations, combining reactive (ReaxFF) molecular dynamics (MD) and density functional theory (DFT) methods, to study the elastic properties and fracture patterns of Pentahexoctite monolayer. Results revealed a Young's Modulus of 0.74 TPa, smaller than the graphene one (about 1.0 TPa). The Pentahexoctite monolayer, when subjected to a critical strain, goes directly from elastic to completely fractured regimes. This process occurs with no plasticity stages between these two regimes. Importantly, graphene presents a similar fracture process. The elastic properties calculated with both DFT and MD are in good agreement. Keywords: Reactive Molecular Dynamics, DFT, Mechanical Properties, Carbon Allotrope,

cond-mat.mtrl-sci↗

arXiv2021

On the Thermomechanical Properties and Fracture Patterns of the Novel Nonbenzenoid Carbon Allotrope (Biphenylene Network): A Reactive Molecular Dynamics Study

Recently, a new two-dimensional carbon allotrope, named biphenylene network (BPN) was experimentally realized. The BPN structure is composed of four-, six-, and eight-membered rings of sp$^2$-hybridized carbon atoms. In this work, we carried out fully-atomistic reactive (ReaxFF) molecular dynamics simulations to study the thermomechanical properties and fracture patterns of non-defective and defective (nanocracks) BPN. Our results show that under uniaxial tensile loading, BPN is converted into four distinct morphologies before fracture starts. This conversion process is dependent on the stretching direction. Some of the formed structures are mainly formed by eight-membered rings, which have different shapes in each morphology. In one of them, a graphitization process was observed before the complete fracture. Importantly, in the presence of nanocracks, no new morphologies are formed. BPN exhibits a distinct fracture process when contrasted to graphene. After the critical strain threshold, the graphene transitions from an elastic to a brittle regime, while BPN can exhibit different inelastic stages. These stages are associated with the appearance of new morphologies. However, BPN shares some of the exceptional graphene properties. Its calculated Young's modulus and melting point values are comparable to the graphene ones, about 1019.4 GPa and 4024K, respectively.

cond-mat.mtrl-sci↗

arXiv2021

Evaluation of Peppermint Leaf Flavonoids as SARS-CoV-2 Spike Receptor-Binding Domain Attachment Inhibitors to the Human ACE2 Receptor: A Molecular Docking Study

Virtual screening is a computational technique widely used for identifying small molecules which are most likely to bind to a protein target. Here, we performed a molecular docking study to propose potential candidates to prevent the RBD/ACE2 attachment. These candidates are sixteen different flavonoids present in the peppermint leaf. Results showed that Luteolin 7-O-neohesperidoside is the peppermint flavonoid with a higher binding affinity regarding the RBD/ACE2 complex (about -9.18 Kcal/mol). On the other hand, Sakuranetin presented the lowest affinity (about -6.38 Kcal/mol). Binding affinities of the other peppermint flavonoids ranged from -6.44 Kcal/mol up to -9.05 Kcal/mol. The binding site surface analysis showed pocket-like regions on the RBD/ACE2 complex that yield several interactions (mostly hydrogen bonds) between the flavonoid and the amino acid residues of the proteins. This study can open channels for the understanding of the roles of flavonoids against COVID-19 infection.

q-bio.BM↗

arXiv2021

Dynamics and Structural Transformations of Carbon Onion-Like under High-Velocity Impacts

Carbon nano-onions (CNO) are multi-shell fullerenes. In the present work, we used fully atomistic reactive (ReaxFF) molecular dynamics simulations to study the dynamics and structural transformations of CNO structures under high-velocity impacts against a fixed and rigid substrate. We considered single and multi-shell CNO (up to six shells) and at different impact velocities (from 2 up to 7 Km/s). Our results indicated three regimes formed after the CNO impact: slightly deformed CNO (quasi-elastic collision, below 2.0 Km/s), collapsed CNO (inelastic collisions, between 3.0 and 5.0 Km/s) forming a diamondoid-like core, and fragmented CNO yielding linear atomic carbon chains (above 5.0 Km/s). We also discussed the dynamical reconfiguration of carbon-carbon bonds during the collision process. The impact of CNO against the substrate yielded $sp^3$-like bond types for all the used initial velocities. At intermediate velocities (between 3.0 and 5.0 Km/s), the inelastic collision forms diamondoid-like cores by converting a substantial quantity of $sp^2$ bonds into $sp^3$ ones. In the high velocities regime, the total number of $sp^1$, $sp^2$, and $sp^3$ bonds tend to be similar.

cond-mat.mtrl-sci↗

arXiv2020

On the Elastic Properties and Fracture Patterns of MoX2 (X = S, Se, Te) Membranes: A Reactive Molecular Dynamics Study

We carried out fully-atomistic reactive molecular dynamics simulations to study the elastic properties and fracture patterns of transition metal dichalcogenide (TMD) MoX2 (X=S, Se, Te) membranes, in their 2H and 1T phases, within the framework of the Stillinger-Weber potential. Results showed that the fracture mechanism of these membranes occurs through a fast crack propagation followed by their abrupt rupture into moieties. As a general trend, the translated arrangement of the chalcogen atoms in the 1T phase contributes to diminishing their structural stability when contrasted with the 2H one. Among the TMDs studied here, 2H-MoSe2 has a higher tensile strength (25.98 GPa).

cond-mat.mtrl-sci↗