arXiv subjects

L. Aballe

Publications and source records attributed to L. Aballe.

At least 19 recordsLinked to original sources

arXiv2025

Magnetic Circular Dichroism at the Oxygen K edge in Microcrystals of Spinels Grown on Ru(0001)

We have measured the circular magnetic dichroism in the x-ray absorption at the K-edge of oxygen in microcrystals of different spinel oxides. The microcrystals are islands of micrometric size and nanometric thickness, grown on Ru(0001) substrates using high-temperature oxygen-assisted molecular beam epitaxy. The domains observed in the oxygen K-edge dichroism have the same distribution and orientation as those observed in x-ray magnetic circular dichroism at the L$_{3}$ edge of the octahedral cations. Integrating the area from a single domain, x-ray magnetic circular dichroic spectra of oxygen were measured and, by the application of the K-edge sum rule, non vanishing orbital magnetic moments aligned with the octahedral cations were found. Density functional theory calculations, which did not show any orbital moment at the oxygen anions, indicate that the energy ranges where oxygen dichroism is observed correspond to those with significant hybridization with the cations d bands. They also show a correlation between the magnitude of the measured value of the oxygen orbital moment and the theoretical one for the cations, and demonstrate that this trend is preserved in the presence of Fe excess in the samples. Our experimental XMCD suggest, following the DFT calculations, that the origin of the oxygen magnetic moment lies in the hybridization of the oxygen unoccupied p-derived bands with the cation bands, mostly with the d-derived ones.

cond-mat.mtrl-sci↗

arXiv2025

Topological analysis and experimental control of transformations of domain walls in magnetic cylindrical nanowires

Topology is a powerful tool for categorizing magnetization textures by defining a topological index in both two-dimensional (2D) systems, such as thin films or curved surfaces, and in 3D bulk systems. In the emerging field of 3D nanomagnetism, both volume and surface topological numbers must be considered, requiring the identification of a proper global topological invariant to support categorization. Here we consider domain walls in cylindrical nanowires as an excellent playground for 3D nanomagnetic systems, excited by a charge current, that generates an OErsted field. We first provide experimental evidence of previously unreported domain-wall transformations of topology occurring at the nanosecond timescale. We investigate these transformations with micromagnetic simulations, tracking both bulk and surface topological signatures.We demonstrate a topological invariant combining both signatures, while the topological charge varies from bulk to surface during the dynamics. The experimental change of topology is reproduced when the pulse duration matches the timescale of the internal transformations of the wall, and the current is switched off before the transformation is complete. We expect that the topological categorization and dynamical exploitation apply to any 3D nanomagnetic system.

cond-mat.mes-hall↗

arXiv2024

Interplay between domain walls and magnetization curling induced by chemical modulations in cylindrical nanowires

Cylindrical magnetic nanowires have been proposed as a means of storing and processing information in a 3D medium, based on the motion of domain walls~(DWs). Introducing short chemical modulations in such wires would allow for reliable digital control of DWs. Here, we outline the intricate physics of the interaction of domain walls with modulations to control their motion, combining micromagnetic simulations and experimental evidence. This interaction combines a long-range moderate magnetostatic repulsion with a local energy well. The latter depends on the respective circulation sense of magnetization in the domain wall and modulation. We also show that a modulation has the ability to switch the internal circulation of a DW upon its propagation, thereby acting as a polarizing component and opening the possibility to exploit not only the position of walls, but also their internal structure.

cond-mat.mes-hall↗

arXiv2023

Epitaxial monolayers of magnetic 2D semiconductor FeBr$_{2}$ grown on Au(111)

Magnetic two-dimensional (2D) semiconductors have attracted a lot of attention because modern preparation techniques are capable of providing single crystal films of these materials with precise control of thickness down to the single-layer limit. It opens up a way to study rich variety of electronic and magnetic phenomena with promising routes towards potential applications. We have investigated the initial stages of epitaxial growth of the magnetic van der Waals semiconductor FeBr\textsubscript{2} on a single-crystal Au(111) substrate by means of low-temperature scanning tunneling microscopy, low-energy electron diffraction, x-ray photoemission spectroscopy, low-energy electron emission microscopy and x-ray photoemission electron microscopy. Magnetic properties of the one- and two-layer thick films were measured via x-ray absorption spectroscopy/x-ray magnetic circular dichroism. Our findings show a striking difference in the magnetic behaviour of the single layer of FeBr\textsubscript{2} and its bulk counterpart, which can be attributed to the modifications in the crystal structure due to the interaction with the substrate.

cond-mat.mtrl-sci↗

arXiv2023

Large-area synthesis of ferromagnetic Fe$_{5-x}$GeTe$_{2}$/graphene van der Waals heterostructures with Curie temperature above room temperature

Van der Waals (vdW) heterostructures combining layered ferromagnets and other two-dimensional (2D) crystals are promising building blocks for the realization of ultra-compact devices with integrated magnetic, electronic and optical functionalities. Their implementation in various technologies depends strongly on the development of a bottom-up scalable synthesis approach allowing to realize highly uniform heterostructures with well-defined interfaces between different 2D layered materials. It also requires that each material component of the heterostructure remains functional, which ideally includes ferromagnetic order above room temperature for 2D ferromagnets. Here, we demonstrate large-area growth of Fe$_{5-x}$GeTe$_{2}$/graphene heterostructures achieved by vdW epitaxy of Fe$_{5-x}$GeTe$_{2}$ on epitaxial graphene. Structural characterization confirmed the realization of a continuous vdW heterostructure film with a sharp interface between Fe$_{5-x}$GeTe$_{2}$ and graphene. Magnetic and transport studies revealed that the ferromagnetic order persists well above 300 K with a perpendicular magnetic anisotropy. In addition, epitaxial graphene on SiC(0001) continues to exhibit a high electronic quality. These results represent an important advance beyond non-scalable flake exfoliation and stacking methods, thus marking a crucial step toward the implementation of ferromagnetic 2D materials in practical applications.

cond-mat.mtrl-sci↗

arXiv2022

Domain Wall Propagation and Pinning Induced by Current Pulses in Cylindrical Modulated Nanowires

The future developments of three-dimensional magnetic nanotechnology require the control of domain wall dynamics by means of current pulses. While this has been extensively studied in planar magnetic strips (planar nanowires), few reports exist in cylindrical geometry, where Bloch point domain walls are expected to have intriguing properties. Here we report this investigation in cylindrical magnetic Ni nanowires with geometrical notches. Experimental work based on synchrotron X-ray magnetic circular dichroism (XMCD) combined with photoemission electron microscopy (PEEM) indicates that large current densities induce domain wall nucleation while smaller currents move domain walls preferably against the current direction. In the region where no pinning centers are present we found domain wall velocity of about 1 km/s. The domain wall motion along current was also detected in the vicinity of the notch region. Pinning of domain walls has been observed not only at geometrical constrictions but also outside of them. Thermal modelling indicates that large current densities temporarily raise the temperature in the nanowire above the Curie temperature leading to nucleation of domain walls during the system cooling. Micromagnetic modelling with spin-torque effect shows that for intermediate current densities Bloch point domain walls with chirality parallel to the Oersted field propagate antiparallel to the current direction. In other cases, domain walls can be bounced from the notches and/or get pinned outside their positions. We thus find that current is not only responsible for the domain wall propagation but is also a source of pinning due to the Oersted field action.

cond-mat.mtrl-sci↗

arXiv2022

Micromagnetics of magnetic chemical modulations in soft-magnetic cylindrical nanowires

We analyze the micromagnetics of short longitudinal modulations of a high-magnetization material in cylindrical nanowires made of a soft-magnetic material of lower magnetization such as permalloy, combining magnetic microscopy, analytical modeling, and micromagnetic simulations. The mismatch of magnetization induces curling of magnetization around the axis in the modulations, in an attempt to screen the interfacial magnetic charges. The curling angle increases with modulation length, until a plateau is reached with nearly full charge screening for a specific length scale~$Δ_\mathrm{mod}$, larger than the dipolar exchange length of any of the two materials. The curling circulation can be switched by the Oersted field arising from a charge current with typical magnitude $10^{12} A/m^{2}$ for a diameter of $\sim$100 nm, and reaching a maximum for $Δ_\mathrm{mod}$.

cond-mat.mes-hall↗

arXiv2020

Influence of the growth conditions on the magnetism of SrFe$_{12}$O$_{19}$ thin films and the behavior of Co / SrFe$_{12}$O$_{19}$ bilayers

SrFe$_{12}$O$_{19}$ (SFO) films grown on Si (100) substrates by radio-frequency magnetron sputtering have been characterized in terms of composition, structural and magnetic properties by a combination of microscopy, diffraction and spectroscopy techniques. Mössbauer spectroscopy was used to determine the orientation of the films magnetization, which was found to be controlled by both the sputtering power and the thickness of the films. Additionally, the coupling between the SFO films and a deposited cobalt overlayer was studied by means of synchrotron-based spectromicroscopy techniques. A structural coupling at the SFO/Co interface is suggested to account for the expetimental observations. Micromagnetic simulations were performed in order to reproduce the experimental behaviour of the system.

cond-mat.mtrl-sci↗

arXiv2020

Fast domain walls governed by Œrsted fields in cylindrical magnetic nanowires

Since its proposal, the idea to vastly increase data storage density with a magnetic non-volatile 3D shift-register has sustained interest in current-induced domain wall (DW) motion. So far, experimental efforts have focused on flat nanostrips, which exhibit a wide range of noteworthy effects, yet suffer from intrinsic DW instabilities limiting their mobility. In contrast, ferromagnetic cylindrical nanowires (NWs) can host a novel type of magnetic DW, namely the Bloch-point wall (BPW), which due to its specific 3D topology should not experience the same fundamental issue. This could give rise to DW velocities over ~1000 m/s and fascinating new physics including coupling to magnetic spin waves, however, experimental evidence of DW dynamics in NWs is lacking until now. Here we report experimental results on current-induced DW motion in NWs with velocities >600 m/s, quantitatively consistent with predictions. Furthermore, our results indicate that although previously disregarded, the OErsted field induced by the current plays instead a crucial and valuable role in stabilising exclusively BPWs.

cond-mat.mes-hall↗

arXiv2019

Reversible Graphene decoupling by NaCl photo-dissociation

We describe the reversible intercalation of Na under graphene on Ir(111) by photo-dissociation of a previously adsorbed NaCl overlayer. After room temperature evaporation, NaCl adsorbs on top of graphene forming a bilayer. With a combination of electron diffraction and photoemission techniques we demonstrate that the NaCl overlayer dissociates upon a short exposure to an X-ray beam. As a result, chlorine desorbs while sodium intercalates under the graphene, inducing an electronic decoupling from the underlying metal. Low energy electron diffraction shows the disappearance of the moiré pattern when Na intercalates between graphene and iridium. Analysis of the Na 2p core-level by X-ray photoelectron spectroscopy shows a chemical change from NaCl to metallic buried Na at the graphene/Ir interface. The intercalation-decoupling process leads to a n-doped graphene due to the charge transfer from the Na, as revealed by constant energy angle resolved X-ray photoemission maps. Moreover, the process is reversible by a mild annealing of the samples without damaging the graphene.

cond-mat.mtrl-sci↗

arXiv2019

Structural characterization of as-grown and quasi-free standing graphene layers on SiC

We report on a comparative structural characterization of two types of high quality epitaxial graphene layers grown by CVD on 4H-SiC(0001). The layers under study are a single layer graphene on top of a buffer layer and a quasi-free-standing graphene obtained by intercalation of hydrogen underneath the buffer layer. We determine the morphology and structure of both layers by different complementary in-situ and ex-situ surface techniques. We found the existence of large islands in both samples but with different size distribution. Photoemission electron microscopy (PEEM) measurements were performed to get information about the chemical environment of the different regions. The study reveals that monolayer graphene prevails in most of the surface terraces, while a bilayer and trilayer graphene presence is observed at the steps, stripes along steps and islands.

cond-mat.mtrl-sci↗

arXiv2017

Direct Observation of Transverse and Vortex Metastable Magnetic Domains observed in Cylindrical Nanowires

We present experimental evidence of metastable magnetic domains in cylindrical CoNi nanowires. Transverse (perpendicular) domains have been previously observed only in flat nanostrips. Here they are found together with more conventional vortex domains along the same cylindrical nanowire, denoting a bistable system with similar free energies. The surface and the inner magnetization distribution in both types of domains are analyzed by Photo-Emission Electron Microscopy (PEEM) with X-ray magnetic circular dichroism (XMCD) contrast, and hysteresis loop in individual nanowires are measured by Magneto-optical Kerr effect. These experimental data are understood and compared with complementary micromagnetic simulations. The transverse domain states are potentially more important for sensing and recording applications than commonly observed vortex domains since they create larger surface stray fields.

cond-mat.mtrl-sci↗

arXiv2016

An invisible non-volatile solid-state memory

Information technologies require entangling data stability with encryption for a next generation of secure data storage. Current magnetic memories, ranging from low-density stripes up to high-density hard drives, can ultimately be detected using routinely available probes or manipulated by external magnetic perturbations. Antiferromagnetic resistors feature unrivalled robustness but the stable resistive states reported scarcely differ by more than a fraction of a percent at room temperature. Here we show that the metamagnetic (ferromagnetic to antiferromagnetic) transition in intermetallic Fe0.50Rh0.50 can be electrically controlled in a magnetoelectric heterostructure to reveal or cloak a given ferromagnetic state. From an aligned ferromagnetic phase, magnetic states are frozen into the antiferromagnetic phase by the application of an electric field, thus eliminating the stray field and likewise making it insensitive to external magnetic field. Application of a reverse electric field reverts the antiferromagnetic state to the original ferromagnetic state. Our work demonstrates the building blocks of a feasible, extremely stable, non-volatile, electrically addressable, low-energy dissipation, magnetoelectric multiferroic memory.

cond-mat.mtrl-sci↗

arXiv2016

Morphology and chemical composition of cobalt germanide islands on Ge(001): in-situ nanoscale insights into contact formation for Ge-based device technology

The reactive growth of cobalt germanide on Ge(001) was investigated by means of in-situ x-ray absorption spectroscopy photoemission electron microscopy (XAS-PEEM), micro-illumination low-energy electron diffraction ($μ$-LEED), and ex-situ atomic force microscopy (AFM). At a Co deposition temperature of 670°C, a rich morphology with different island shapes and dimensions is observed, and a correlation between island morphology and stoichiometry is found. Combining XAS-PEEM and $μ$-LEED, we were able to identify a large part of the islands to consist of CoGe$_2$, with many of them having an unusual epitaxial relationship: CoGe$_2$[$\bar110$](111) $\parallel$ Ge[$\bar110$](001). Side facets with (112) and (113) orientation have been found for such islands. However, two additional phases were observed, most likely Co$_5$Ge$_7$ and CoGe. The occurrence of these intermediate phases is promoted by defects, as revealed by comparing growth on Ge(001) single crystals and on Ge(001)/Si(001) epilayer substrates.

cond-mat.mtrl-sci↗

arXiv2011

Stress engineering at the nanometer scale: Two-component adlayer stripes

Spontaneously formed equilibrium nanopatterns with long-range order are widely observed in a variety of systems, but their pronounced temperature dependence remains an impediment to maintain such patterns away from the temperature of formation. Here, we report on a highly ordered stress-induced stripe pattern in a two-component, Pd-O, adsorbate monolayer on W(110), produced at high temperature and identically preserved at lower temperatures. The pattern shows a tunable period (down to 16 nm) and orientation, as predicted by a continuum model theory along with the surface stress and its anisotropy found in our DFT calculations. The control over thermal fluctuations in the stripe formation process is based on the breaking/restoring of ergodicity in a high-density lattice gas with long-range interactions upon turning off/on particle exchange with a heat bath.

cond-mat.mes-hall↗

arXiv2009

Measuring the magnetization of three monolayer thick Co islands and films by X-ray dichroism

Co islands and films are characterized by x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM). The spatial resolution capabilties of the technique together with atomic growth control permit obtaining perfectly flat triangular islands with a given thickness (3 ML), very close to an abrupt spin-reorientation transition. The magnetic domain configurations are found to depend on island size: while small islands can be magnetized in a single-domain state, larger islands show more complex patterns. Furthermore, the magnetization pattern of the larger islands presents a common chirality. By means of dichroic spectro-microscopy at the Co L absorption edges, an experimental estimate of the ratio of the spin- and orbital magnetic moment for three monolayer thick films is obtained.

cond-mat.mes-hall↗

arXiv2008

Stress induced stripe formation in Pd/W(110)

A stress-induced stripe phase of submonolayer Pd on W(110) is observed by low-energy electron microscopy. The temperature dependence of the pattern is explained by the change both in the boundary free energy and elastic relaxation energy due to the increasing boundary width. The stripes are shown to disorder when the correlation length of the condensed phase becomes comparable to its period, while the condensate to lattice-gas transition takes place at a higher temperature, as revealed by low-energy electron diffraction.

cond-mat.mtrl-sci↗

arXiv2008

Strain relaxation in small adsorbate islands: O on W(110)

The stress-induced lattice changes in a p(1x2) ordered oxygen layer on W(110) are measured by low-energy electron diffraction. We have observed that small oxygen islands show a mismatch with the underlying lattice. Our results indicate that along [1-10] the average mismatch scales inversely with the island size as 1/L for all oxygen coverages up to 0.5 ML, while along [001] it is significant only for the smallest oxygen islands and scales as a higher power of the inverse island size. The behaviour along [1-10] is described by a one-dimensional finite-size Frenkel-Kontorova model. Using this model, together with calculated force constants, we make a quantitative estimate for the change of surface-stress upon oxygen adsorption. The result is consistent with our ab-initio calculations, which give a relative compressive stress of -4.72 N/m along [1-10] and a minute relative tensile stress of 0.15 N/m along [001]. The scaling along [001] is qualitatively explained as an effect induced by the lattice relaxation in the [1-10] direction.

cond-mat.mtrl-sci↗