Searcharxiv⌕ Search

arXiv subjects

L. Bandiera

Publications and source records attributed to L. Bandiera.

At least 19 recordsLinked to original sources

Energy calibration of bulk events in the BULLKID detector

BULLKID is a cryogenic, solid-state detector designed for direct searches of particle Dark Matter candidates, with mass $\lesssim 1$ GeV/c$^2$, and coherent neutrino-nucleus scattering. It is based on an array of dice carved in 5 mm thick silicon crystal, sensed by phonon-mediated Kinetic Inductance Detectors. In previous works, the array was calibrated with bursts of optical photons, which are absorbed in the first hundreds nanometers of the dice and give rise to surface events. In this work, we present the reconstruction of bulk events through the 59.5 keV $γ$-ray generated by an $^{241}$Am source, which emulates more closely the interaction of Dark Matter and neutrinos. The peak resolution is $5\%~(σ)$ and its position is shifted by less than $10\%$ with respect to the optical calibration. We observe that the resolution is further improved by a factor $2$ combining the signal from neighboring dice. These results confirm the performance of the detector in view of the physics goals of the BULLKID-DM experiment for dark matter search.

physics.ins-det↗

Projected sensitivity to light WIMP-like particles of the BULLKID-DM experiment

BULLKID-DM is an experiment designed for the direct searches of particle dark matter candidates with mass around 1 GeV, or below, and cross-section with nucleons smaller than $10^{-40}$ cm$^2$. The detector consists of a stack of diced silicon wafers, acting as arrays of particle absorbers, sensed by multiplexed Kinetic Inductance Detectors. The target will amount to 800 g subdivided in more than 2000 silicon dice, with the aim of controlling the background from natural radioactivity by creating a fully active structure and by applying fiducialization techniques. In this work we present the projected sensitivity of BULLKID-DM to light WIMP-like particles considering also the other future experiments in the field.

physics.ins-det↗

New measurement of BR$(K^+\rightarrowπ^+ν\barν)$ at the NA62 experiment

The decay $K^+\rightarrowπ^+ν\barν$ with a very precisely predicted branching ratio of less than $10^{-10}$ is one of the best candidates to reveal indirect effects of new physics at the highest mass scales. The NA62 experiment at the CERN SPS is designed to measure the branching ratio of the $K^+\rightarrowπ^+ν\barν$ decay. A new measurement of its branching ratio based on the 20230-2024 dataset is presented. This doubles the total dataset, leading to a 5$σ$ expected sensitivity for the Standard Model process.

hep-ex↗

Development of a Cryogenic Anti-Coincidence System Based on Scintillating Crystals Read Out with Kinetic Inductance Detectors for BULLKID-DM

The BULLKID-DM experiment has been proposed to search for WIMP-like dark matter particles with a mass of 1 GeV or lower and with a WIMP-nucleon interaction cross section down to $10^{-43}$ cm$^2$. To achieve this goal, the experiment utilizes a detector consisting of a stack of 16 silicon wafers instrumented with phonon-mediated superconducting Kinetic Inductance Detectors (KIDs), to be operated at the underground facility of the Laboratori Nazionali del Gran Sasso (LNGS), Italy. To reduce the residual background arising from $γ$-rays, neutrons, and muons, a cryogenic active anti-coincidence system (veto) operating at mK temperature, surrounding the main detector, is under development. The veto detector consists of segmented scintillating crystals read out by phonon-mediated KID light detectors. Current status and future developments of the veto system are presented. In particular, we focus on cryogenic tests of both bismuth germanate (BGO) and gadolinium aluminum gallium garnet (GAGG) crystals, which had been previously chosen as veto candidate crystals according to our preliminary studies on the dependence of their optical properties (i.e. light yield and scintillation decay time) on temperature. We finally present the operation and preliminary tests of a two-module veto prototype with multiplexed readout.

physics.ins-det↗

Evidence for MeV Radiation from a Large-Amplitude Crystalline Undulator

We report evidence for MeV radiation from a large-amplitude crystalline undulator in which 35 GeV/c positrons channel along periodically bent Si(110) planes. Si$_3$N$_4$ stressors produce ten periods with $λ_u = 334~μ$m and midplane amplitude $A_u \simeq 1.85$ nm (XRD-validated modeling). Under planar alignment, the energy-loss spectrum shows an excess over the misaligned case peaking at $6.8 \pm 0.3$ MeV ($4.05σ$), in agreement with simulations and the 7.2 MeV analytical estimate. Simulations for 20 GeV FCC-ee injector positrons predict a peak brilliance of $1.8\times10^{21}$ photons/(s mm$^2$ mrad$^2$ 0.1% BW).

physics.acc-ph↗

From Simulation to Fabrication: Realizing Silicon Crystalline Undulators with Silicon Nitride Stressor Layer Patterning

A crystalline undulator is a crystal exhibiting periodic deformations that cause channeled particles to oscillate, generating coherent electromagnetic waves. In this study, stressor layer patterning has been employed to induce the desired deformations on a silicon substrate. Finite element method simulations were performed to optimize the geometric parameters of the undulator. The primary focus was on achieving sinusoidal deformation with sub-millimeter period and amplitude exceeding 1~nm, utilizing the silicon (110) plane for its superior channeling properties. Key parameters, such as substrate thickness and undulator period, were meticulously refined to ensure uniform deformation while minimizing the impact of higher harmonics, which could degrade performance. Based on the simulation results, a crystalline undulator, 160 $μ$m thick and consisting of 10 periods with a period length of 334 $μ$m, has been successfully fabricated. The final device demonstrates structural integrity and a uniform deformation extending up to 20 $μ$m from the surface. Specifically designed for use with 5-30 GeV particle beams, the undulator is capable of generating gamma photons in the 5-15 MeV range. This work effectively integrates advanced simulation techniques with precise fabrication methods, demonstrating the feasibility of crystalline undulators as high-performance devices for generating gamma radiation.

physics.acc-ph↗

High-Intense Gamma-Ray Emission from a Crystalline Undulator with Realistic Bending Profiles

The development of compact and intense $γ$-ray sources in the MeV energy range remains a significant frontier in radiation physics, with profound implications for nuclear physics, medicine and applied science. In this work, we present a comprehensive numerical investigation of the photon emission probability and brilliance of a Crystalline Undulator (CU) based on a periodically bent Si(110) crystal. Our approach integrates realistic deformation profiles obtained via Finite Element Method simulations of a realistic sample, where bending is induced by patterned Si$_3$N$_4$ surface stressors. Relativistic molecular dynamics simulations, performed using the MBN Explorer software package, consider a 10 GeV positron beam consistent with the foreseen FACET-II facility specifications. Our results reveal a distinct undulator radiation peak in the 1.6-2.1 MeV range, well-separated from the broader channeling radiation background. We show that for an optimal aperture angle of $1/2γ$, the source reaches a maximum peak brilliance of about $5\times10^{22}$~photons/s/mm$^2$/mrad$^2$/0.1\%~BW. This performance is highly competitive with large-scale Gamma-Beam Systems and exceeds that of Inverse-Compton Scattering sources, confirming the potential of crystalline undulators as high-brilliance, compact light sources for the MeV domain.

physics.acc-ph↗

Beam Steering and Radiation Generation of Electrons in Bent Crystals in the Sub-GeV Domain

We present an investigation into beam steering and radiation emission by sub-GeV electrons traversing bent silicon crystals. Using 855, 600, and 300~MeV electron beams at the Mainz Microtron (MAMI), we explored orientational coherent effects and particle dynamics in a 15~$μ$m-thick crystal bent along the (111) planes. Combined experimental and simulation analyses enabled the classification and quantitative assessment of the contributions from channeling, dechanneling, rechanneling, and volume capture to both beam deflection and radiation emission. Crystal steering remained effective even at 300~MeV, with measured channeling efficiencies exceeding 50\%, a record at such low energy. Channeling and volume reflection enhanced radiation emission by up to a factor of six compared to the misaligned orientation, highlighting strong orientational coherence effects in the sub-GeV regime. These findings confirm the feasibility of using bent crystals for efficient beam manipulation and high-intensity photon generation at low energies, supporting the development of novel light sources and beam control strategies at accelerator facilities operating in this energy range.

physics.acc-ph↗

Simulation model of crystal-based beam extraction using BDSim toolkit enhanced with Geant4 G4ChannelingFastSimModel

We present a simulation model for crystal-based beam extraction of lepton beams from an accelerator by using a bent crystal. This model utilizes the BDSim toolkit for particle dynamics in an accelerator in conjunction with the Geant4 G4ChannelingFastSimModel for beam deflection in a bent crystal and G4BaierKatkov for radiation losses. In order to link these codes, we designed a new BDSim accelerator component - a bent crystal compatible with G4ChannelingFastSimModel. As a demonstration, we constructed a complete simulation model of the DESY II Booster Synchrotron within BDSim, incorporating all relevant accelerator components and apertures. The model accounts for betatron and synchrotron oscillations, as well as radiation losses in an oriented crystal, using the Baier-Katkov radiation integral. Simulation results demonstrate the extraction of a primary monoenergetic 6 GeV electron beam, characterized by a charge of 23 pC, a horizontal beam emittance of 3.6 $μ$m$\cdot$rad, a vertical beam emittance of 0.32 $μ$m$\cdot$rad, and an energy spread of 0.008. Under the simulated conditions, (1.42 $\pm$ 0.02 %) of the initial circulating beam reaches the septum entrance. This corresponds to an extraction efficiency of (28.1 $\pm$ 0.4 %) when evaluated relative to the particles intercepted by the bent crystal. The approach provides a powerful tool to significantly accelerate R\&D for applications related to crystal-based extraction and collimation in lepton accelerators and colliders.

physics.acc-ph↗

Background of the BULLKID detector array operated with moderate shield on surface

We present the operation with moderate radiation shield in a surface laboratory of BULLKID (BULky and Low-threshold Kinetic Inductance Detector), a cryogenic detector for searches of light Dark Matter or Coherent Elastic Neutrino-Nucleus Scattering. The detector consists of an array of 60 cubic silicon particle absorbers of 0.34 g each, sensed by cryogenic kinetic inductance detectors. The analysis presented focuses on data from 15 elements of the array, with two central units used to evaluate the background and with their surrounding elements used as veto. The low energy spectrum resulting from an exposure of 290 hours to ambient backgrounds, acquired with the use of external and internal radiation shields, is compatible with the simulations at the level of $(6.8\pm0.4\,{\rm stat.}\pm0.1\,{\rm syst.})\times10^4$ counts / keV kg days from 2 keV down to an energy of 600 eV. The region between 225 eV and 600 eV shows a rise in background in disagreement with the simulations, while not sharing some of the key traits of the low energy excess observed in other cryogenic experiments. The high energy spectrum shape is in overall agreement with the simulations and displays the typical particle-induced X-ray emission of the surrounding lead.

hep-ex↗

Active interrogation of underground piezoelectric fabrics using high energy muon beams propagating across seismogenic faults

In this paper we extend a previous analysis of a newly conceived technique based on active interrogation of tectonic stress evolution in regions hosting active seismogenic faults. The aim is to monitor and detect stable and reliable precursor signals on an adequate time scale, well before an earthquake event, that can play a crucial role in activating alarms for civil protection systems. The precursor signal relies on continuous measurements of the time evolution of tectonic stress, obtained by interrogating underground, with a high energy collimated muon beam, the piezoelectric fabrics present in quartz rich granite like rocks surrounding a known seismogenic fault in the Earth crust. Beam propagation through the rock across the active fault conveys to a detector at the exit of the traversal information on the amplitude of the piezoelectric field, which scales with the tectonic stress applied to quartz crystals embedded in the rock. The system, named ERMES (Earthquake Reconnaissance using Muon beam Evolution in Silicon dioxide), differs from other techniques under study detecting electromagnetic signals generated by piezoelectricity outside the Earth crust, as it probes piezoelectric effects directly inside the source region of the associated electromagnetic field, namely the near field within quartz crystals rather than the far field in open space. We present a focused analysis of muon beam manipulation after rock traversal and before detection using a newly conceived muonic lens, and we explore the maximum rock penetration capability of a high energy muon beam, reaching about 3 km of rock thickness for a 10 TeV beam. Owing to the peculiarity of muon propagation through such kilometer scale targets, we cross checked previous FLUKA Monte Carlo simulations with Geant4 to clarify the secondary muons role generated by primary muon interactions in solid matter over long propagation lengths.

physics.acc-ph↗

Investigation of Radiation Emitted by Sub GeV Electrons in Oriented Scintillator Crystals

The research investigates coherent interactions between sub-GeV electrons and oriented scintillator crystals, leading to enhanced electromagnetic (EM) radiation. Experiments at Mainz Mikrotron (MAMI) involved PWO, BGO, and CsI crystals oriented along $\langle100\rangle$, $\langle111\rangle$, and $\langle100\rangle$ axes. Enhanced radiation emission was observed when the beam aligned with crystal axes, especially in BGO and CsI for the first time. These findings are crucial for innovative detectors using oriented crystal scintillators, amplifying EM processes along specific crystallographic directions. Potential applications include ultra-compact, highly sensitive electromagnetic calorimeters for high-energy physics and astroparticles, as well as high-performance gamma detectors for nuclear physics and medical imaging.

hep-ex↗

Observation of Fine Structure in Channeling of Particles in Bent Crystals

We observed highly efficient manipulation of the 530 MeV positron beam at Mainz Microtron via bent crystals. The low beam divergence revealed a fine structure in the angular distribution of channeled particles. A compact analytical model, supported by Monte Carlo including multiple scattering, accounts for the measurements. We established a criterion for designing a crystal with reduced angular spread of channeled particles for beam manipulation at any energy. This finding is particularly useful in view of applications of channeling to the highest energies.

physics.acc-ph↗

Real-Time Readout System Design for the BULLKID-DM Experiment: Enhancing Dark Matter Search Capabilities

The BULLKID-DM experiment aims to detect WIMP-like potential Dark Matter particles with masses below 1 GeV/c^2. Sensing these particles is challenging, as it requires nuclear recoil detectors characterized by high exposure and an energy threshold in the order of 100 eV, thus exceeding the capabilities of conventional semiconductor detectors. BULLKID-DM intends to tackle this challenge by using cryogenic Kinetic Inductance Detectors (MKIDs) with exceptional energy thresholds to sense a target with a total mass of 800 g across 16 wafers, divided into over 2000 individually instrumented silicon dice. The MKIDs on each wafer are coupled to a single transmission line and read using a frequency division multiplexing approach by the room-temperature data acquisition. In this contribution, we describe and assess the design of the room-temperature readout electronics system, including the selected hardware components and the FPGA firmware which contains the real-time signal processing stages for tone generation, frequency demultiplexing, and event triggering. We evaluate the system on the ZCU216 board, a commercial evaluation card built around a Radio-Frequency System-on-Chip (RFSoC) with integrated high-speed DACs and ADCs, and connected it to a custom-designed analog front-end for signal conditioning.

physics.ins-det↗

R&D on a high-performance electromagnetic calorimeter based on oriented crystalline scintillators

Although inorganic scintillators are widely used in the design of electromagnetic calorimeters for high-energy physics and astrophysics, their crystalline nature and, hence, their lattice orientation are generally neglected in the detector design. However, in general, the features of the electromagnetic field experienced by the particles impinging on a crystal at a small angle with respect to a lattice axis affect their interaction mechanisms. In particular, in case of electrons/photons of $\mathcal{O} (10~\mathrm{GeV})$ or higher impinging on a high-$Z$ crystal at an angle of $\lesssim 1~\mathrm{mrad}$, the so-called strong field regime is attained: the bremsstrahlung and pair production cross sections are enhanced with respect to the case of amorphous or randomly oriented materials. Overall, the increase of these processes leads to an acceleration of the electromagnetic shower development. These effects are thoroughly investigated by the OREO (ORiEnted calOrimeter) team, and pave the way to the development of innovative calorimeters with a higher energy resolution, a higher efficiency in photon detection and an improved particle identification capabilities due to the relative boost of the electromagnetic interactions with respect to the hadronic ones. Moreover, a detector with the same resolution as the current state of the art and reduced thickness could be developed. An overview of the lattice effects at the foundation of the shower boost and of the current status of the development of an operational calorimeter prototype are presented. This concept could prove pivotal for both accelerator fixed-target experiments and satellite-borne $γ$-ray observatories.

physics.ins-det↗

A highly-compact and ultra-fast homogeneous electromagnetic calorimeter based on oriented lead tungstate crystals

Progress in high-energy physics has been closely tied to the development of highperformance electromagnetic calorimeters. Recent experiments have demonstrated the possibility to significantly accelerate the development of electromagnetic showers inside scintillating crystals typically used in homogeneous calorimeters based on scintillating crystals when the incident beam is aligned with a crystallographic axis to within a few mrad. In particular, a reduction of the radiation length has been measured when ultrarelativistic electron and photon beams were incident on a high-Z scintillator crystal along one of its main axes. Here, we propose the possibility to exploit this physical effect for the design of a new type of compact e.m. calorimeter, based on oriented ultrafast lead tungstate (PWO-UF) crystals, with a significant reduction in the depth needed to contain electromagnetic showers produced by high-energy particles with respect to the state-of-the-art. We report results from tests of the crystallographic quality of PWO-UF samples via high-resolution X-ray diffraction and photoelastic analysis. We then describe a proof-of-concept calorimeter geometry defined with a Geant4 model including the shower development in oriented crystals. Finally, we discuss the experimental techniques needed for the realization of a matrix of scintillator crystals oriented along a specific crystallographic direction. Since the angular acceptance for e.m. shower acceleration depends little on the particle energy, while the decrease of the shower length remains pronounced at very high energy, an oriented crystal calorimeter will open the way for applications at the maximum energies achievable in current and future experiments. Such applications span from forward calorimeters, to compact beam dumps for the search for light dark matter, to source-pointing space-borne γ-ray telescopes.

physics.ins-det↗

Summary Report of the Physics Beyond Colliders Study at CERN

The Physics Beyond Collider (PBC) Study Group was initially mandated by the CERN Management to prepare the previous European Particle Physics Strategy Update for CERN projects other than the high-energy frontier colliders. The main findings were summarized in an PBC Summary Report submitted to the Strategy Update. Following the Update process, the PBC Study Group was confirmed on a permanent basis with an updated mandate taking into account the strategy recommendations. The Study Group is now in charge of supporting the proponents of new ideas to address the technical issues and physics motivation of the projects ahead of their review by the CERN Scientific Committees and decision by the Management. The present document updates the previous PBC summary report to inform the new ongoing European Particle Physics Strategy Update process, taking into account the evolution of the CERN and worldwide landscapes and the new projects under consideration within the Study Group.

hep-ex↗

Performance of short and long bent crystals for the TWOCRYST experiment at the Large Hadron Collider

This study investigates the performance of bent silicon crystals intended to channel hadrons in a fixed-target experiment at the Large Hadron Collider (LHC). The phenomenon of planar channelling in bent crystals enables extremely high effective bending fields for positively charged hadrons within compact volumes. Particles trapped in the potential well of high-purity, ordered atomic lattices follow the mechanical curvature of the crystal, resulting in macroscopic deflections. Although the bend angle remains constant across different momenta (i.e., the phenomenon is non-dispersive), the channelling acceptance and efficiency still depend on the particle momentum. Crystals with lengths from 5 cm to 10 cm, bent to angles between 5 mrad and 15 mrad, are under consideration for measurements of the electric and magnetic dipole moments of short-lived charmed baryons, such as the Lambda_c^+. Such large deflection angles over short distances cannot be achieved using conventional magnets. The principle of inducing spin precession through bent crystals for magnetic dipole moment measurements was first demonstrated in the 1990s. Building on this concept, experimental layouts are now being explored at the LHC. The feasibility of such measurements depends, among other factors, on the availability of crystals with the mechanical properties required to achieve the necessary channelling performance. To address this, a dedicated machine experiment, TWOCRYST, has been installed in the LHC to carry out beam tests in the TeV energy range. The bent crystals for TWOCRYST were fabricated and tested using X-ray diffraction and high-momentum hadron beams at 180 GeV/c at the CERN SPS. This paper presents an analysis of the performance of these newly developed crystals, as characterised by these measurements.

hep-ex↗