arXiv subjects

L. Beaufore

Publications and source records attributed to L. Beaufore.

5 recordsLinked to original sources

arXiv2026

The High-Energy Light Isotope eXperiment (HELIX) Instrument

The HELIX detector is a balloon-borne instrument designed to measure the flux of light (Z < 11) cosmic-ray isotopes. In this paper we describe the initial configuration of HELIX, optimized for measurements in the energy range from approximately 0.2 GeV per nucleon to beyond 3 GeV per nucleon. In addition to a spectrometer, which is based on a one-tesla superconducting magnet and a drift-chamber tracker, HELIX employs scintillator-based time-of-flight counters and a ring-imaging Cherenkov detector, allowing event-by-event reconstruction of primary particle mass, charge, and magnetic rigidity.

astro-ph.IM↗

arXiv2026

Trigger system for the Payload for Ultrahigh Energy Observations (PUEO) balloon-borne neutrino detector

The Payload for Ultrahigh Energy Observations (PUEO) is a NASA balloon-borne instrument for the detection of ultra-high energy (UHE) neutrinos with energies above $10^{17.5}~\textrm{eV}$ via either the Askaryan effect or geomagnetic emissions from an upward-going air shower. The main instrument trigger system for PUEO is a fully digital supersample rate beamformer based on 24 Xilinx Radio Frequency System-on-a-Chip (RFSoC) digitizers sampling 192 channels operating at $3~\textrm{GSa/s}$ and a system clock frequency of $375~\textrm{MHz}$. The trigger implements frequency band conditioning, dynamic radio-frequency interference (RFI) rejection, and matched filtering, with significant emphasis on optimization to reduce both the power and resource usage while maintaining sensitivity. The system implements 48 total synthetic antenna beams with up to 8 antennas each, covering a $\sim25^\circ$ range in zenith and $\sim60^\circ$ range in azimuth. Preflight testing demonstrated a trigger performance of a minimum signal-to-noise ratio (SNR) of $\sim1.5$ using simulated signals while consuming between $5-7~\textrm{W}$ in the trigger logic.

astro-ph.IM↗

arXiv2023

The High Energy Light Isotope eXperiment program of direct cosmic-ray studies

HELIX is a new NASA-sponsored instrument aimed at measuring the spectra and composition of light cosmic-ray isotopes from hydrogen to neon nuclei, in particular the clock isotopes 10Be (radioactive, with 1.4 Myr lifetime) and 9Be (stable). The latter are unique markers of the production and Galactic propagation of secondary cosmic-ray nuclei, and are needed to resolve such important mysteries as the proportion of secondary positrons in the excess of antimatter observed by the AMS-02 experiment. By using a combination of a 1 T superconducting magnet spectrometer (with drift-chamber tracker) with a high-resolution time-of-flight detector system and ring-imaging Cherenkov detector, mass-resolved isotope measurements of light cosmic-ray nuclei will be possible up to 3 GeV/n in a first stratospheric balloon flight from Kiruna, Sweden to northern Canada, anticipated to take place in early summer 2024. An eventual longer Antarctic balloon flight of HELIX will yield measurements up to 10 GeV/n, sampling production from a larger volume of the Galaxy extending into the halo. We review the instrument design, testing, status and scientific prospects.

astro-ph.IM↗

arXiv2023

Electron-beam Calibration of Aerogel Tiles for the HELIX RICH Detector

The HELIX cosmic-ray detector is a balloon-borne instrument designed to measure the flux of light isotopes in the energy range from 0.2 GeV/n to beyond 3 GeV/n. It will rely on a ring-imaging Cherenkov (RICH) detector for particle identification at energies greater than 1 GeV/n and will use aerogel tiles with refractive index near 1.15 as the radiator. To achieve the performance goals of the experiment it is necessary to know the refractive index and its position dependence over the lateral extent of the tiles to a precision of O(10$^{-4}). In this paper we describe the apparatus and methods developed to calibrate the HELIX tiles in an electron beam, in order to meet this requirement.

astro-ph.IM↗

arXiv2015

The Dark Energy Camera

The Dark Energy Camera is a new imager with a 2.2-degree diameter field of view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on Cerro Tololo near La Serena, Chile. The camera was designed and constructed by the Dark Energy Survey Collaboration, and meets or exceeds the stringent requirements designed for the wide-field and supernova surveys for which the collaboration uses it. The camera consists of a five element optical corrector, seven filters, a shutter with a 60 cm aperture, and a CCD focal plane of 250 micron thick fully-depleted CCDs cooled inside a vacuum Dewar. The 570 Mpixel focal plane comprises 62 2kx4k CCDs for imaging and 12 2kx2k CCDs for guiding and focus. The CCDs have 15 microns x15 microns pixels with a plate scale of 0.263 arc sec per pixel. A hexapod system provides state-of-the-art focus and alignment capability. The camera is read out in 20 seconds with 6-9 electrons readout noise. This paper provides a technical description of the camera's engineering, construction, installation, and current status.

astro-ph.IM↗