arXiv subjects

L. Corcione

Publications and source records attributed to L. Corcione.

At least 19 recordsLinked to original sources

arXiv2026

Euclid. Properties and performance of the NISP signal estimator

The Euclid spacecraft, located at the second Lagrangian point of the Sun-Earth system, hosts the Near-Infrared Spectrometer and Photometer (NISP) instrument. NISP is equipped with a mosaic of 16 HgCdTe-based detectors to acquire near-infrared photometric and spectroscopic data. To meet the spacecraft's constraints on computational resources and telemetry bandwidth, the near-infrared signal is processed onboard via a dedicated hardware-software architecture designed to fulfil the stringent Euclid's data-quality requirements. A custom application software, running on the two NISP data processing units, implements the NISP signal estimator: an ad-hoc algorithm which delivers accurate flux measurements and simultaneously estimates the quality of signal estimation through the quality factor parameter. This paper investigates the properties of the NISP signal estimator by evaluating its performance during the early flight operations of the NISP instrument. First, we revisit the assumptions on which the inference of the near-infrared signal is based and investigate the origin of the main systematics of the signal estimator through Monte Carlo simulations. Then, we test the flight performance of the NISP signal estimator. Results indicate a systematic bias lower than 0.01 e/s for 99% of the NISP pixel array, well within the noise budget of the estimated signal. We also derive an analytical expression for the variance of the NISP signal estimator, demonstrating its validity, particularly when the covariance matrix is not pre-computed. Finally, we provide a robust statistical framework to interpret the QF parameter, analyse its dependence on the signal estimator bias, and show its sensitivity to cosmic ray hits on NISP detectors. Our findings corroborate previous results on the NISP signal estimator and suggest a leading-order correction based on the agreement between flight data and simulations.

astro-ph.IM↗

arXiv2025

Euclid preparation. XLI. Galaxy power spectrum modelling in real space

We investigate the accuracy of the perturbative galaxy bias expansion in view of the forthcoming analysis of the Euclid spectroscopic galaxy samples. We compare the performance of an Eulerian galaxy bias expansion, using state-of-art prescriptions from the effective field theory of large-scale structure (EFTofLSS), against a hybrid approach based on Lagrangian perturbation theory and high-resolution simulations. These models are benchmarked against comoving snapshots of the Flagship I N-body simulation at $z=(0.9,1.2,1.5,1.8)$, which have been populated with H$α$ galaxies leading to catalogues of millions of objects within a volume of about $58\,h^{-3}\,{\rm Gpc}^3$. Our analysis suggests that both models can be used to provide a robust inference of the parameters $(h, ω_{\rm c})$ in the redshift range under consideration, with comparable constraining power. We additionally determine the range of validity of the EFTofLSS model in terms of scale cuts and model degrees of freedom. From these tests, it emerges that the standard third-order Eulerian bias expansion can accurately describe the full shape of the real-space galaxy power spectrum up to the maximum wavenumber $k_{\rm max}=0.45\,h\,{\rm Mpc}^{-1}$, even with a measurement precision well below the percent level. In particular, this is true for a configuration with six free nuisance parameters, including local and non-local bias parameters, a matter counterterm, and a correction to the shot-noise contribution. Fixing either tidal bias parameters to physically-motivated relations still leads to unbiased cosmological constraints. We finally repeat our analysis assuming a volume that matches the expected footprint of Euclid, but without considering observational effects, as purity and completeness, showing that we can get consistent cosmological constraints over this range of scales and redshifts.

astro-ph.CO↗

arXiv2025

Euclid preparation. Overview of Euclid infrared detector performance from ground tests

The paper describes the objectives, design and findings of the pre-launch ground characterisation campaigns of the Euclid infrared detectors. The pixel properties, including baseline, bad pixels, quantum efficiency, inter pixel capacitance, quantum efficiency, dark current, readout noise, conversion gain, response nonlinearity, and image persistence were measured and characterised for each pixel. We describe in detail the test flow definition that allows us to derive the pixel properties and we present the data acquisition and data quality check software implemented for this purpose. We also outline the measurement protocols of all the pixel properties presented and we provide a comprehensive overview of the performance of the Euclid infrared detectors as derived after tuning the operating parameters of the detectors. The main conclusion of this work is that the performance of the infrared detectors Euclid meets the requirements. Pixels classified as non-functioning accounted for less than 0.2% of all science pixels. IPC coupling is minimal and crosstalk between adjacent pixels is less than 1% between adjacent pixels. 95% of the pixels show a QE greater than 80% across the entire spectral range of the Euclid mission. The conversion gain is approximately 0.52 ADU/e-, with a variation less than 1% between channels of the same detector. The reset noise is approximately equal to 23 ADU after reference pixels correction. The readout noise of a single frame is approximately 13 $e^-$ while the signal estimator noise is measured at 7 $e^-$ in photometric mode and 9 $e^-$ in spectroscopic acquisition mode. The deviation from linear response at signal levels up to 80 k$e^-$ is less than 5% for 95% of the pixels. Median persistence amplitudes are less than 0.3% of the signal, though persistence exhibits significant spatial variation and differences between detectors.

astro-ph.IM↗

arXiv2025

Euclid preparation: The NISP spectroscopy channel, on ground performance and calibration

ESA's Euclid cosmology mission relies on the very sensitive and accurately calibrated spectroscopy channel of the Near-Infrared Spectrometer and Photometer (NISP). With three operational grisms in two wavelength intervals, NISP provides diffraction-limited slitless spectroscopy over a field of $0.57$ deg$^2$. A blue grism $\text{BG}_\text{E}$ covers the wavelength range $926$--$1366$\,nm at a spectral resolution $R=440$--$900$ for a $0.5''$ diameter source with a dispersion of $1.24$ nm px$^{-1}$. Two red grisms $\text{RG}_\text{E}$ span $1206$ to $1892$\,nm at $R=550$--$740$ and a dispersion of $1.37$ nm px$^{-1}$. We describe the construction of the grisms as well as the ground testing of the flight model of the NISP instrument where these properties were established.

astro-ph.IM↗

arXiv2025

Euclid preparation. Constraining parameterised models of modifications of gravity with the spectroscopic and photometric primary probes

The Euclid mission has the potential to understand the fundamental physical nature of late-time cosmic acceleration and, as such, of deviations from the standard cosmological model, LCDM. In this paper, we focus on model-independent methods to modify the evolution of scalar perturbations at linear scales. We consider two approaches: the first is based on the two phenomenological modified gravity (PMG) parameters, $μ_{\rm mg}$ and $Σ_{\rm mg}$, which are phenomenologically connected to the clustering of matter and weak lensing, respectively; and the second is the effective field theory (EFT) of dark energy and modified gravity, which we use to parameterise the braiding function, $α_{\rm B}$, which defines the mixing between the metric and the dark energy field. We discuss the predictions from spectroscopic and photometric primary probes by Euclid on the cosmological parameters and a given set of additional parameters featuring the PMG and EFT models. We use the Fisher matrix method applied to spectroscopic galaxy clustering (GCsp), weak lensing (WL), photometric galaxy clustering (GCph), and cross-correlation (XC) between GCph and WL. For the modelling of photometric predictions on nonlinear scales, we use the halo model to cover two limits for the screening mechanism: the unscreened (US) case, for which the screening mechanism is not present; and the super-screened (SS) case, which assumes strong screening. We also assume scale cuts to account for our uncertainties in the modelling of nonlinear perturbation evolution. We choose a time-dependent form for $\{μ_{\rm mg},Σ_{\rm mg}\}$, with two fiducial sets of values for the corresponding model parameters at the present time, $\{\barμ_0,\barΣ_0\}$, and two forms for $α_{\rm B}$, with one fiducial set of values for each of the model parameters, $α_{\rm B,0}$ and $\{α_{\rm B,0},m\}$. (Abridged)

astro-ph.CO↗

arXiv2025

Performance of the image persistence model for Euclid infrared detectors

Large-format infrared detectors are at the heart of major ground and space-based astronomical instruments, and the HgCdTe HxRG is the most widely used. The Near Infrared Spectrometer and Photometer (NISP) of the ESA's Euclid mission launched in July 2023 hosts 16 H2RG detectors in the focal plane. Their performance relies heavily on the effect of image persistence, which results in residual images that can remain in the detector for a long time contaminating any subsequent observations. Deriving a precise model of image persistence is challenging due to the sensitivity of this effect to observation history going back hours or even days. Nevertheless, persistence removal is a critical part of image processing because it limits the accuracy of the derived cosmological parameters. We will present the empirical model of image persistence derived from ground characterization data, adapted to the Euclid observation sequence and compared with the data obtained during the in-orbit calibrations of the satellite.

astro-ph.IM↗

arXiv2025

Euclid: The Early Release Observations Lens Search Experiment

We investigated the ability of the Euclid telescope to detect galaxy-scale gravitational lenses. To do so, we performed a systematic visual inspection of the $0.7\,\rm{deg}^2$ Euclid Early Release Observations data towards the Perseus cluster using both the high-resolution $I_{\scriptscriptstyle\rm E}$ band and the lower-resolution $Y_{\scriptscriptstyle\rm E}$, $J_{\scriptscriptstyle\rm E}$, $H_{\scriptscriptstyle\rm E}$ bands. Each extended source brighter than magnitude 23 in $I_{\scriptscriptstyle\rm E}$ was inspected by 41 expert human classifiers. This amounts to $12\,086$ stamps of $10^{\prime\prime}\,\times\,10^{\prime\prime}$. We found $3$ grade A and $13$ grade B candidates. We assessed the validity of these $16$ candidates by modelling them and checking that they are consistent with a single source lensed by a plausible mass distribution. Five of the candidates pass this check, five others are rejected by the modelling, and six are inconclusive. Extrapolating from the five successfully modelled candidates, we infer that the full $14\,000\,{\rm deg}^2$ of the Euclid Wide Survey should contain $100\,000^{+70\,000}_{-30\,000}$ galaxy-galaxy lenses that are both discoverable through visual inspection and have valid lens models. This is consistent with theoretical forecasts of $170\,000$ discoverable galaxy-galaxy lenses in Euclid. Our five modelled lenses have Einstein radii in the range $0.\!\!^{\prime\prime}68\,<\,θ_\mathrm{E}\,<1.\!\!^{\prime\prime}24$, but their Einstein radius distribution is on the higher side when compared to theoretical forecasts. This suggests that our methodology is likely missing small-Einstein-radius systems. Whilst it is implausible to visually inspect the full Euclid dataset, our results corroborate the promise that Euclid will ultimately deliver a sample of around $10^5$ galaxy-scale lenses.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). NIR processing and data products

This paper describes the near-infrared processing function (NIR PF) that processes near-infrared images from the Near-Infrared Spectrometer and Photometer (NISP) instrument onboard the Euclid satellite. NIR PF consists of three main components: (i) a common pre-processing stage for both photometric (NIR) and spectroscopic (SIR) data to remove instrumental effects; (ii) astrometric and photometric calibration of NIR data, along with catalogue extraction; and (iii) resampling and stacking. The necessary calibration products are generated using dedicated pipelines that process observations from both the early performance verification (PV) phase in 2023 and the nominal survey operations. After outlining the pipeline's structure and algorithms, we demonstrate its application to Euclid Q1 images. For Q1, we achieve an astrometric accuracy of 9-15 mas, a relative photometric accuracy of 5 mmag, and an absolute flux calibration limited by the 1% uncertainty of the Hubble Space Telescope (HST) CALSPEC database. We characterise the point-spread function (PSF) that we find very stable across the focal plane, and we discuss current limitations of NIR PF that will be improved upon for future data releases.

astro-ph.CO↗

arXiv2025

Euclid: Quick Data Release (Q1) -- A census of dwarf galaxies across a range of distances and environments

The Euclid Q1 fields were selected for calibration purposes in cosmology and are therefore relatively devoid of nearby galaxies. However, this is precisely what makes them interesting fields in which to search for dwarf galaxies in local density environments. We take advantage of the unprecedented depth, spatial resolution, and field of view of the Euclid Quick Release (Q1) to build a census of dwarf galaxies in these regions. We have identified dwarfs in a representative sample of 25 contiguous tiles in the Euclid Deep Field North (EDF-N), covering an area of 14.25 sq. deg. The dwarf candidates were identified using a semi-automatic detection method, based on properties measured by the Euclid pipeline and listed in the MER catalogue. A selection cut in surface brightness and magnitude was used to produce an initial dwarf candidate catalogue, followed by a cut in morphology and colour. This catalogue was visually classified to produce a final sample of dwarf candidates, including their morphology, number of nuclei, globular cluster (GC) richness, and presence of a blue compact centre. We identified 2674 dwarf candidates, corresponding to 188 dwarfs per sq. deg. The visual classification of the dwarfs reveals a slightly uneven morphological mix of 58% ellipticals and 42% irregulars, with very few potentially GC-rich (1.0%) and nucleated (4.0%) candidates but a noticeable fraction (6.9%) of dwarfs with blue compact centres. The distance distribution of 388 (15%) of the dwarfs with spectroscopic redshifts peaks at about 400 Mpc. Their stellar mass distribution confirms that our selection effectively identifies dwarfs while minimising contamination. The most prominent dwarf overdensities are dominated by dEs, while dIs are more evenly distributed. This work highlights Euclid's remarkable ability to detect and characterise dwarf galaxies across diverse masses, distances, and environments.

astro-ph.GA↗

arXiv2025

Euclid: A complete Einstein ring in NGC 6505

We report the discovery of a complete Einstein ring around the elliptical galaxy NGC 6505, at $z=0.042$. This is the first strong gravitational lens discovered in Euclid and the first in an NGC object from any survey. The combination of the low redshift of the lens galaxy, the brightness of the source galaxy ($I_\mathrm{E}=18.1$ lensed, $I_\mathrm{E}=21.3$ unlensed), and the completeness of the ring make this an exceptionally rare strong lens, unidentified until its observation by Euclid. We present deep imaging data of the lens from the Euclid Visible Camera (VIS) and Near-Infrared Spectrometer and Photometer (NISP) instruments, as well as resolved spectroscopy from the Keck Cosmic Web Imager (KCWI). The Euclid imaging in particular presents one of the highest signal-to-noise ratio optical/near-infrared observations of a strong gravitational lens to date. From the KCWI data we measure a source redshift of $z=0.406$. Using data from the Dark Energy Spectroscopic Instrument (DESI) we measure a velocity dispersion for the lens galaxy of $σ_\star=303\pm15\,\mathrm{kms}^{-1}$. We model the lens galaxy light in detail, revealing angular structure that varies inside the Einstein ring. After subtracting this light model from the VIS observation, we model the strongly lensed images, finding an Einstein radius of 2.5 arcsec, corresponding to $2.1\,\mathrm{kpc}$ at the redshift of the lens. This is small compared to the effective radius of the galaxy, $R_\mathrm{eff}\sim 12.3\,\mathrm{arcsec}$. Combining the strong lensing measurements with analysis of the spectroscopic data we estimate a dark matter fraction inside the Einstein radius of $f_\mathrm{DM} = (11.1_{-3.5}^{+5.4})\%$ and a stellar initial mass-function (IMF) mismatch parameter of $α_\mathrm{IMF} = 1.26_{-0.08}^{+0.05}$, indicating a heavier-than-Chabrier IMF in the centre of the galaxy.

astro-ph.GA↗

arXiv2024

Euclid preparation. LII. Forecast impact of super-sample covariance on 3x2pt analysis with Euclid

Deviations from Gaussianity in the distribution of the fields probed by large-scale structure surveys generate additional terms in the data covariance matrix, increasing the uncertainties in the measurement of the cosmological parameters. Super-sample covariance (SSC) is among the largest of these non-Gaussian contributions, with the potential to significantly degrade constraints on some of the parameters of the cosmological model under study - especially for weak lensing cosmic shear. We compute and validate the impact of SSC on the forecast uncertainties on the cosmological parameters for the Euclid photometric survey, obtained with a Fisher matrix analysis, both considering the Gaussian covariance alone and adding the SSC term - computed through the public code $\tt{PySSC}$. The photometric probes are considered in isolation and combined in the '3$\times$2pt' analysis. We find the SSC impact to be non-negligible - halving the Figure of Merit of the dark energy parameters $(w_0, w_a)$ in the 3$\times$2pt case and substantially increasing the uncertainties on $Ω_{{\rm m}, 0}, w_0$, and $σ_8$ for cosmic shear; photometric galaxy clustering, on the other hand, is less affected due to the lower probe response. The relative impact of SSC does not show significant changes under variations of the redshift binning scheme, while it is smaller for weak lensing when marginalising over the multiplicative shear bias nuisance parameters, which also leads to poorer constraints on the cosmological parameters. Finally, we explore how the use of prior information on the shear and galaxy bias changes the SSC impact. Improving shear bias priors does not have a significant impact, while galaxy bias must be calibrated to sub-percent level to increase the Figure of Merit by the large amount needed to achieve the value when SSC is not included.

astro-ph.CO↗

arXiv2024

Euclid preparation: XLVIII. The pre-launch Science Ground Segment simulation framework

The European Space Agency's Euclid mission is one of the upcoming generation of large-scale cosmology surveys, which will map the large-scale structure in the Universe with unprecedented precision. The development and validation of the SGS pipeline requires state-of-the-art simulations with a high level of complexity and accuracy that include subtle instrumental features not accounted for previously as well as faster algorithms for the large-scale production of the expected Euclid data products. In this paper, we present the Euclid SGS simulation framework as applied in a large-scale end-to-end simulation exercise named Science Challenge 8. Our simulation pipeline enables the swift production of detailed image simulations for the construction and validation of the Euclid mission during its qualification phase and will serve as a reference throughout operations. Our end-to-end simulation framework starts with the production of a large cosmological N-body & mock galaxy catalogue simulation. We perform a selection of galaxies down to I_E=26 and 28 mag, respectively, for a Euclid Wide Survey spanning 165 deg^2 and a 1 deg^2 Euclid Deep Survey. We build realistic stellar density catalogues containing Milky Way-like stars down to H<26. Using the latest instrumental models for both the Euclid instruments and spacecraft as well as Euclid-like observing sequences, we emulate with high fidelity Euclid satellite imaging throughout the mission's lifetime. We present the SC8 data set consisting of overlapping visible and near-infrared Euclid Wide Survey and Euclid Deep Survey imaging and low-resolution spectroscopy along with ground-based. This extensive data set enables end-to-end testing of the entire ground segment data reduction and science analysis pipeline as well as the Euclid mission infrastructure, paving the way to future scientific and technical developments and enhancements.

astro-ph.CO↗

arXiv2024

Euclid preparation: 6x2 pt analysis of Euclid's spectroscopic and photometric data sets

We present cosmological parameter forecasts for the Euclid 6x2pt statistics, which include the galaxy clustering and weak lensing main probes together with previously neglected cross-covariance and cross-correlation signals between imaging/photometric and spectroscopic data. The aim is understanding the impact of such terms on the Euclid performance. We produce 6x2pt cosmological forecasts, considering two different techniques: the so-called harmonic and hybrid approaches, respectively. In the first, we treat all the different Euclid probes in the same way, i.e. we consider only angular 2pt-statistics for spectroscopic and photometric clustering, as well as for weak lensing, analysing all their possible cross-covariances and cross-correlations in the spherical harmonic domain. In the second, we do not account for negligible cross-covariances between the 3D and 2D data, but consider the combination of their cross-correlation with the auto-correlation signals. We find that both cross-covariances and cross-correlation signals, have a negligible impact on the cosmological parameter constraints and, therefore, on the Euclid performance. In the case of the hybrid approach, we attribute this result to the effect of the cross-correlation between weak lensing and photometric data, which is dominant with respect to other cross-correlation signals. In the case of the 2D harmonic approach, we attribute this result to two main theoretical limitations of the 2D projected statistics implemented in this work according to the analysis of official Euclid forecasts: the high shot noise and the limited redshift range of the spectroscopic sample, together with the loss of radial information from subleading terms such as redshift-space distortions and lensing magnification. Our analysis suggests that 2D and 3D Euclid data can be safely treated as independent, with a great saving in computational resources.

astro-ph.CO↗

arXiv2024

Euclid preparation. LI. Forecasting the recovery of galaxy physical properties and their relations with template-fitting and machine-learning methods

Euclid will collect an enormous amount of data during the mission's lifetime, observing billions of galaxies in the extragalactic sky. Along with traditional template-fitting methods, numerous machine learning algorithms have been presented for computing their photometric redshifts and physical parameters (PPs), requiring significantly less computing effort while producing equivalent performance measures. However, their performance is limited by the quality and amount of input information, to the point where the recovery of some well-established physical relationships between parameters might not be guaranteed. To forecast the reliability of Euclid photo-$z$s and PPs calculations, we produced two mock catalogs simulating Euclid photometry. We simulated the Euclid Wide Survey (EWS) and Euclid Deep Fields (EDF). We tested the performance of a template-fitting algorithm (Phosphoros) and four ML methods in recovering photo-$z$s, PPs (stellar masses and star formation rates), and the SFMS. To mimic the Euclid processing as closely as possible, the models were trained with Phosphoros-recovered labels. For the EWS, we found that the best results are achieved with a mixed labels approach, training the models with wide survey features and labels from the Phosphoros results on deeper photometry, that is, with the best possible set of labels for a given photometry. This imposes a prior, helping the models to better discern cases in degenerate regions of feature space, that is, when galaxies have similar magnitudes and colors but different redshifts and PPs, with performance metrics even better than those found with Phosphoros. We found no more than 3% performance degradation using a COSMOS-like reference sample or removing u band data, which will not be available until after data release DR1. The best results are obtained for the EDF, with appropriate recovery of photo-$z$, PPs, and the SFMS.

astro-ph.GA↗

arXiv2024

Euclid preparation. XLIX. Selecting active galactic nuclei using observed colours

Euclid will cover over 14000 $deg^{2}$ with two optical and near-infrared spectro-photometric instruments, and is expected to detect around ten million active galactic nuclei (AGN). This unique data set will make a considerable impact on our understanding of galaxy evolution and AGN. In this work we identify the best colour selection criteria for AGN, based only on Euclid photometry or including ancillary photometric observations, such as the data that will be available with the Rubin legacy survey of space and time (LSST) and observations already available from Spitzer/IRAC. The analysis is performed for unobscured AGN, obscured AGN, and composite (AGN and star-forming) objects. We make use of the spectro-photometric realisations of infrared-selected targets at all-z (SPRITZ) to create mock catalogues mimicking both the Euclid Wide Survey (EWS) and the Euclid Deep Survey (EDS). Using these catalogues we estimate the best colour selection, maximising the harmonic mean (F1) of completeness and purity. The selection of unobscured AGN in both Euclid surveys is possible with Euclid photometry alone with F1=0.22-0.23, which can increase to F1=0.43-0.38 if we limit at z>0.7. Such selection is improved once the Rubin/LSST filters (a combination of the u, g, r, or z filters) are considered, reaching F1=0.84 and 0.86 for the EDS and EWS, respectively. The combination of a Euclid colour with the [3.6]-[4.5] colour, which is possible only in the EDS, results in an F1-score of 0.59, improving the results using only Euclid filters, but worse than the selection combining Euclid and LSST. The selection of composite ($f_{\rm AGN}$=0.05-0.65 at 8-40 $μm$) and obscured AGN is challenging, with F1<0.3 even when including ancillary data. This is driven by the similarities between the broad-band spectral energy distribution of these AGN and star-forming galaxies in the wavelength range 0.3-5 $μm$.

astro-ph.GA↗

arXiv2024

Euclid Preparation. Cosmic Dawn Survey: Data release 1 multiwavelength catalogues for Euclid Deep Field North and Euclid Deep Field Fornax

The Cosmic Dawn Survey (DAWN survey) provides multiwavelength (UV/optical to mid-IR) data across the combined 59 deg$^{2}$ of the Euclid Deep and Auxiliary fields (EDFs and EAFs). Here, the first public data release (DR1) from the DAWN survey is presented. DR1 catalogues are made available for a subset of the full DAWN survey that consists of two Euclid Deep fields: Euclid Deep Field North (EDF-N) and Euclid Deep Field Fornax (EDF-F). The DAWN survey DR1 catalogues do not include $Euclid$ data as they are not yet public for these fields. Nonetheless, each field has been covered by the ongoing Hawaii Twenty Square Degree Survey (H20), which includes imaging from CFHT MegaCam in the new $u$ filter and from Subaru Hyper Suprime-Cam (HSC) in the $griz$ filters. Each field is further covered by $Spitzer$/IRAC 3.6-4.5$μ$m imaging spanning 10 deg$^{2}$ and reaching $\sim$25 mag AB (5$σ$). All present H20 imaging and all publicly available imaging from the aforementioned facilities are combined with the deep $Spitzer$/IRAC data to create source catalogues spanning a total area of 16.87 deg$^{2}$ in EDF-N and 2.85 deg$^{2}$ in EDF-F for this first release. Photometry is measured using The Farmer, a well-validated model-based photometry code. Photometric redshifts and stellar masses are computed using two independent codes for modeling spectral energy distributions: EAZY and LePhare. Photometric redshifts show good agreement with spectroscopic redshifts ($σ_{\rm NMAD} \sim 0.5, η< 8\%$ at $i < 25$). Number counts, photometric redshifts, and stellar masses are further validated in comparison to the COSMOS2020 catalogue. The DAWN survey DR1 catalogues are designed to be of immediate use in these two EDFs and will be continuously updated. Future data releases will provide catalogues of all EDFs and EAFs and include $Euclid$ data.

astro-ph.GA↗

arXiv2024

Euclid: Constraining linearly scale-independent modifications of gravity with the spectroscopic and photometric primary probes

The future Euclid space satellite mission will offer an invaluable opportunity to constrain modifications to Einstein's general relativity at cosmic scales. We focus on modified gravity models characterised, at linear scales, by a scale-independent growth of perturbations while featuring different testable types of derivative screening mechanisms at smaller non-linear scales. We considered three specific models, namely JBD, a scalar-tensor theory with a flat potential, the nDGP gravity, a braneworld model in which our Universe is a four-dimensional brane embedded in a five-dimensional Minkowski space-time, and $k$-mouflage (KM) gravity, an extension of $k$-essence scenarios with a universal coupling of the scalar field to matter. In preparation for real data, we provide forecasts from spectroscopic and photometric primary probes by Euclid on the cosmological parameters and the additional parameters of the models, respectively, $ω_{\rm BD}$, $Ω_{\rm rc}$ and $ε_{2,0}$. The forecast analysis employs the Fisher matrix method applied to weak lensing (WL); photometric galaxy clustering (GCph), spectroscopic galaxy clustering (GCsp) and the cross-correlation (XC) between GCph and WL. In an optimistic setting at 68.3\% confidence interval, we find the following percentage relative errors with Euclid alone: for $\log_{10}{ω_{\rm BD}}$, with a fiducial value of $ω_{\rm BD}=800$, 27.1\% using GCsp alone, 3.6\% using GCph+WL+XC and 3.2\% using GCph+WL+XC+GCsp; for $\log_{10}{Ω_{\rm rc}}$, with a fiducial value of $Ω_{\rm rc}=0.25$, we find 93.4\%, 20\% and 15\% respectively; and finally, for $ε_{2,0}=-0.04$, we find 3.4\%, 0.15\%, and 0.14\%. (abridged)

astro-ph.CO↗

arXiv2024

Euclid. IV. The NISP Calibration Unit

The near-infrared calibration unit (NI-CU) on board Euclid's Near-Infrared Spectrometer and Photometer (NISP) is the first astronomical calibration lamp based on light-emitting diodes (LEDs) to be operated in space. Euclid is a mission in ESA's Cosmic Vision 2015-2025 framework, to explore the dark universe and provide a next-level characterisation of the nature of gravitation, dark matter, and dark energy. Calibrating photometric and spectrometric measurements of galaxies to better than 1.5% accuracy in a survey homogeneously mapping ~14000 deg^2 of extragalactic sky requires a very detailed characterisation of near-infrared (NIR) detector properties, as well their constant monitoring in flight. To cover two of the main contributions - relative pixel-to-pixel sensitivity and non-linearity characteristics - as well as support other calibration activities, NI-CU was designed to provide spatially approximately homogeneous (<12% variations) and temporally stable illumination (0.1%-0.2% over 1200s) over the NISP detector plane, with minimal power consumption and energy dissipation. NI-CU is covers the spectral range ~[900,1900] nm - at cryo-operating temperature - at 5 fixed independent wavelengths to capture wavelength-dependent behaviour of the detectors, with fluence over a dynamic range of >=100 from ~15 ph s^-1 pixel^-1 to >1500 ph s^-1 pixel^-1. For this functionality, NI-CU is based on LEDs. We describe the rationale behind the decision and design process, describe the challenges in sourcing the right LEDs, as well as the qualification process and lessons learned. We also provide a description of the completed NI-CU, its capabilities and performance as well as its limits. NI-CU has been integrated into NISP and the Euclid satellite, and since Euclid's launch in July 2023 has started supporting survey operations.

astro-ph.IM↗