arXiv subjects

L. DiCarlo

Publications and source records attributed to L. DiCarlo.

At least 19 recordsLinked to original sources

arXiv2026

Coherent versus stochastic error injection on a repetition-code logical qubit in superconducting hardware

The performance of quantum error correction (QEC) codes is limited by the underlying physical noise. Theoretical studies show that coherent and stochastic noise have different effects when performing QEC with either surface or repetition codes. We use the bitflip repetition code, realized in a transmon quantum processor, as a testbed to experimentally study the impact of injecting coherent versus stochastic errors on the logical performance. We adapt a scalable free-fermion simulator to simulate the experiments and we modify a subset sampling technique to efficiently sample stochastic noise in the quantum circuit. In the experiment, we do not observe the difference in logical fidelity predicted by simulation for either the distance-3 or distance-5 repetition codes. We hypothesize that this discrepancy could be explained by small drifts in qubit frequencies, which introduce phase-coherent noise that `stochastifies' the injected coherent errors. Our work contributes to advancing an understanding of how coherent errors affect experimental QEC.

quant-ph↗

arXiv2026

Qubit error bursts in superconducting quantum processors of Quantum Inspire: quasiparticle pumping and anomalous time dependence

We investigate qubit error bursts in 5- and 7-transmon processors of similar design, fabrication and packaging, but with different types of qubit Josephson junctions. Measurements for each are performed in two refrigerators to discern device-specific from refrigerator-dependent characteristics. The duration and rate of bursts are device specific but within the range of prior experiments and consistent with ionizing radiation. We observe two unforeseen signatures specifically in the processor with Dolan junctions. First, increasing the rate of $\pi$ pulsing in the detection scheme shortens the recovery time to equilibrium, which is explained by a quasiparticle pumping mechanism. The second signature is an anomalous time dependence in the burst rate: a surge happens days or weeks after cooldown, followed by a strong suppression that persists until thermal cycling.

quant-ph↗

arXiv2025

Optimizing the frequency positioning of tunable couplers in a circuit QED processor to mitigate spectator effects on quantum operations

We experimentally optimize the frequency of flux-tunable couplers in a superconducting quantum processor to minimize the impact of spectator transmons during quantum operations (single-qubit gates, two-qubit gates and readout) on other transmons. We adapt a popular transmon-like tunable-coupling element, achieving high-fidelity, low-leakage controlled-$Z$ gates with unipolar, fast-adiabatic pulsing only on the coupler. We demonstrate the ability of the tunable coupler to null residual $ZZ$ coupling as well as exchange couplings in the one- and two-excitation manifolds. However, the nulling of these coherent interactions is not simultaneous, prompting the exploration of tradeoffs. We present experiments pinpointing spectator effects on specific quantum operations. We also study the combined effect on the three types of operations using repeated quantum parity measurements.

quant-ph↗

arXiv2023

Wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan-style Josephson junctions for superconducting quantum processors

We investigate die-level and wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan Josephson junctions, using multiple substrates with and without through-silicon vias (TSVs). Dolan junctions fabricated on planar substrates have the highest yield and lowest room-temperature conductance spread, equivalent to ~100 MHz in transmon frequency. In TSV-integrated substrates, Dolan junctions suffer most in both yield and disorder, making Manhattan junctions preferable. Manhattan junctions show pronounced conductance decrease from wafer centre to edge, which we qualitatively capture using a geometric model of spatially-dependent resist shadowing during junction electrode evaporation. Analysis of actual junction overlap areas using scanning electron micrographs supports the model, and further points to a remnant spatial dependence possibly due to contact resistance.

quant-ph↗

arXiv2023

All-microwave leakage reduction units for quantum error correction with superconducting transmon qubits

Minimizing leakage from computational states is a challenge when using many-level systems like superconducting quantum circuits as qubits. We realize and extend the quantum-hardware-efficient, all-microwave leakage reduction unit (LRU) for transmons in a circuit QED architecture proposed by Battistel et al. This LRU effectively reduces leakage in the second- and third-excited transmon states with up to $99\% $ efficacy in $220~\mathrm{ns}$, with minimum impact on the qubit subspace. As a first application in the context of quantum error correction, we demonstrate the ability of multiple simultaneous LRUs to reduce the error detection rate and to suppress leakage buildup within $1\%$ in data and ancilla qubits over 50 cycles of a weight-2 parity measurement.

quant-ph↗

arXiv2023

Post-fabrication frequency trimming of coplanar-waveguide resonators in circuit QED quantum processors

We present the use of grounding airbridge arrays to trim the frequency of microwave coplanar-waveguide (CPW) resonators post fabrication. This method is compatible with the fabrication steps of conventional CPW airbridges and crossovers and increases device yield by allowing compensation of design and fabrication uncertainty with $100~\mathrm{MHz}$ range and $10~\mathrm{MHz}$ resolution. We showcase two applications in circuit QED. The first is elimination of frequency crowding between resonators intended to readout different transmons by frequency-division multiplexing. The second is frequency matching of readout and Purcell-filter resonator pairs. Combining this matching with transmon frequency trimming by laser annealing reliably achieves fast and high-fidelity readout across 17-transmon quantum processors.

quant-ph↗

arXiv2023

Lower-temperature fabrication of airbridges by grayscale lithography to increase yield of nanowire transmons in circuit QED quantum processors

Quantum hardware based on circuit quantum electrodynamics makes extensive use of airbridges to suppress unwanted modes of wave propagation in coplanar-waveguide transmission lines. Airbridges also provide an interconnect enabling transmission lines to cross. Traditional airbridge fabrication produces a curved profile by reflowing resist at elevated temperature prior to metallization. The elevated temperature can affect the coupling energy and even yield of pre-fabricated Josephson elements of superconducting qubits, tuneable couplers and resonators. We employ grayscale lithography in place of reflow to reduce the peak airbridge processing temperature from $200$ to $150^\circ\mathrm{C}$, showing a substantial yield increase of transmon qubits with Josephson elements realized using Al-contacted InAs nanowires.

quant-ph↗

arXiv2022

Realization of a quantum neural network using repeat-until-success circuits in a superconducting quantum processor

Artificial neural networks are becoming an integral part of digital solutions to complex problems. However, employing neural networks on quantum processors faces challenges related to the implementation of non-linear functions using quantum circuits. In this paper, we use repeat-until-success circuits enabled by real-time control-flow feedback to realize quantum neurons with non-linear activation functions. These neurons constitute elementary building blocks that can be arranged in a variety of layouts to carry out deep learning tasks quantum coherently. As an example, we construct a minimal feedforward quantum neural network capable of learning all 2-to-1-bit Boolean functions by optimization of network activation parameters within the supervised-learning paradigm. This model is shown to perform non-linear classification and effectively learns from multiple copies of a single training state consisting of the maximal superposition of all inputs.

quant-ph↗

arXiv2021

Logical-qubit operations in an error-detecting surface code

We realize a suite of logical operations on a distance-two logical qubit stabilized using repeated error detection cycles. Logical operations include initialization into arbitrary states, measurement in the cardinal bases of the Bloch sphere, and a universal set of single-qubit gates. For each type of operation, we observe higher performance for fault-tolerant variants over non-fault-tolerant variants, and quantify the difference through detailed characterization. In particular, we demonstrate process tomography of logical gates, using the notion of a logical Pauli transfer matrix. This integration of high-fidelity logical operations with a scalable scheme for repeated stabilization is a milestone on the road to quantum error correction with higher-distance superconducting surface codes.

quant-ph↗

arXiv2020

Variational preparation of finite-temperature states on a quantum computer

The preparation of thermal equilibrium states is important for the simulation of condensed-matter and cosmology systems using a quantum computer. We present a method to prepare such mixed states with unitary operators, and demonstrate this technique experimentally using a gate-based quantum processor. Our method targets the generation of thermofield double states using a hybrid quantum-classical variational approach motivated by quantum-approximate optimization algorithms, without prior calculation of optimal variational parameters by numerical simulation. The fidelity of generated states to the thermal-equilibrium state smoothly varies from 99 to 75% between infinite and near-zero simulated temperature, in quantitative agreement with numerical simulations of the noisy quantum processor with error parameters drawn from experiment.

quant-ph↗

arXiv2020

High-fidelity controlled-Z gate with maximal intermediate leakage operating at the speed limit in a superconducting quantum processor

We introduce the sudden variant (SNZ) of the Net Zero scheme realizing controlled-$Z$ (CZ) gates by baseband flux control of transmon frequency. SNZ CZ gates operate at the speed limit of transverse coupling between computational and non-computational states by maximizing intermediate leakage. The key advantage of SNZ is tuneup simplicity, owing to the regular structure of conditional phase and leakage as a function of two control parameters. We realize SNZ CZ gates in a multi-transmon processor, achieving $99.93\pm0.24\%$ fidelity and $0.10\pm0.02\%$ leakage. SNZ is compatible with scalable schemes for quantum error correction and adaptable to generalized conditional-phase gates useful in intermediate-scale applications.

quant-ph↗

arXiv2020

Protecting quantum entanglement from leakage and qubit errors via repetitive parity measurements

Protecting quantum information from errors is essential for large-scale quantum computation. Quantum error correction (QEC) encodes information in entangled states of many qubits, and performs parity measurements to identify errors without destroying the encoded information. However, traditional QEC cannot handle leakage from the qubit computational space. Leakage affects leading experimental platforms, based on trapped ions and superconducting circuits, which use effective qubits within many-level physical systems. We investigate how two-transmon entangled states evolve under repeated parity measurements, and demonstrate the use of hidden Markov models to detect leakage using only the record of parity measurement outcomes required for QEC. We show the stabilization of Bell states over up to 26 parity measurements by mitigating leakage using postselection, and correcting qubit errors using Pauli-frame transformations. Our leakage identification method is computationally efficient and thus compatible with real-time leakage tracking and correction in larger quantum processors.

quant-ph↗

arXiv2020

Leakage detection for a transmon-based surface code

Leakage outside of the qubit computational subspace, present in many leading experimental platforms, constitutes a threatening error for quantum error correction (QEC) for qubits. We develop a leakage-detection scheme via Hidden Markov models (HMMs) for transmon-based implementations of the surface code. By performing realistic density-matrix simulations of the distance-3 surface code (Surface-17), we observe that leakage is sharply projected and leads to an increase in the surface-code defect probability of neighboring stabilizers. Together with the analog readout of the ancilla qubits, this increase enables the accurate detection of the time and location of leakage. We restore the logical error rate below the memory break-even point by post-selecting out leakage, discarding about 47% of the data. Leakage detection via HMMs opens the prospect for near-term QEC demonstrations, targeted leakage reduction and leakage-aware decoding and is applicable to other experimental platforms.

quant-ph↗

arXiv2019

Calculating energy derivatives for quantum chemistry on a quantum computer

Modeling chemical reactions and complicated molecular systems has been proposed as the `killer application' of a future quantum computer. Accurate calculations of derivatives of molecular eigenenergies are essential towards this end, allowing for geometry optimization, transition state searches, predictions of the response to an applied electric or magnetic field, and molecular dynamics simulations. In this work, we survey methods to calculate energy derivatives, and present two new methods: one based on quantum phase estimation, the other on a low-order response approximation. We calculate asymptotic error bounds and approximate computational scalings for the methods presented. Implementing these methods, we perform the world's first geometry optimization on an experimental quantum processor, estimating the equilibrium bond length of the dihydrogen molecule to within 0.014 Angstrom of the full configuration interaction value. Within the same experiment, we estimate the polarizability of the H2 molecule, finding agreement at the equilibrium bond length to within 0.06 a.u. (2% relative error).

quant-ph↗

arXiv2019

Time-domain characterization and correction of on-chip distortion of control pulses in a quantum processor

We introduce Cryoscope, a method for sampling on-chip baseband pulses used to dynamically control qubit frequency in a quantum processor. We specifically use Cryoscope to measure the step response of the dedicated flux control lines of two-junction transmon qubits in circuit QED processors with the temporal resolution of the room-temperature arbitrary waveform generator producing the control pulses. As a first application, we iteratively improve this step response using optimized real-time digital filters to counter the linear-dynamical distortion in the control line, as needed for high-fidelity, repeatable one- and two-qubit gates based on dynamical control of qubit frequency.

quant-ph↗

arXiv2019

A fast, low-leakage, high-fidelity two-qubit gate for a programmable superconducting quantum computer

A common approach to realize conditional-phase (CZ) gates in transmon qubits relies on flux control of the qubit frequency to make computational states interact with non-computational ones using a fast-adiabatic trajectory to minimize leakage. We develop a bipolar flux-pulsing method with two key advantages over the traditional unipolar variant. First, the action of the bipolar pulse is robust to long-timescale linear-dynamical distortions in the flux-control line, facilitating tuneup and ensuring atomic repeatability. Second, the flux symmetry of the transmon Hamiltonian makes the conditional phase and the single-qubit phase of the pulsed qubit first-order insensitive to low-frequency flux noise, increasing fidelity. By harnessing destructive interference to minimize leakage, the bipolar pulse can approach the speed limit set by the exchange coupling. We demonstrate a repeatable, high-fidelity ($99.1\%$), low-leakage ($0.1\%$), and fast ($40~\mathrm{ns}$) CZ gate in a circuit QED quantum processor. Detailed numerical simulations with excellent match to experiment show that leakage is dominated by remaining short-timescale distortions and fidelity is limited by high-frequency flux noise.

quant-ph↗

arXiv2019

Error Mitigation by Symmetry Verification on a Variational Quantum Eigensolver

Variational quantum eigensolvers offer a small-scale testbed to demonstrate the performance of error mitigation techniques with low experimental overhead. We present successful error mitigation by applying the recently proposed symmetry verification technique to the experimental estimation of the ground-state energy and ground state of the hydrogen molecule. A finely adjustable exchange interaction between two qubits in a circuit QED processor efficiently prepares variational ansatz states in the single-excitation subspace respecting the parity symmetry of the qubit-mapped Hamiltonian. Symmetry verification improves the energy and state estimates by mitigating the effects of qubit relaxation and residual qubit excitation, which violate the symmetry. A full-density-matrix simulation matching the experiment dissects the contribution of these mechanisms from other calibrated error sources. Enforcing positivity of the measured density matrix via scalable convex optimization correlates the energy and state estimate improvements when using symmetry verification, with interesting implications for determining system properties beyond the ground-state energy.

quant-ph↗

arXiv2018

eQASM: An Executable Quantum Instruction Set Architecture

A widely-used quantum programming paradigm comprises of both the data flow and control flow. Existing quantum hardware cannot well support the control flow, significantly limiting the range of quantum software executable on the hardware. By analyzing the constraints in the control microarchitecture, we found that existing quantum assembly languages are either too high-level or too restricted to support comprehensive flow control on the hardware. Also, as observed with the quantum microinstruction set QuMIS, the quantum instruction set architecture (QISA) design may suffer from limited scalability and flexibility because of microarchitectural constraints. It is an open challenge to design a scalable and flexible QISA which provides a comprehensive abstraction of the quantum hardware. In this paper, we propose an executable QISA, called eQASM, that can be translated from quantum assembly language (QASM), supports comprehensive quantum program flow control, and is executed on a quantum control microarchitecture. With efficient timing specification, single-operation-multiple-qubit execution, and a very-long-instruction-word architecture, eQASM presents better scalability than QuMIS. The definition of eQASM focuses on the assembly level to be expressive. Quantum operations are configured at compile time instead of being defined at QISA design time. We instantiate eQASM into a 32-bit instruction set targeting a seven-qubit superconducting quantum processor. We validate our design by performing several experiments on a two-qubit quantum processor.

cs.AR↗