arXiv subjects

L. F. Wei

Publications and source records attributed to L. F. Wei.

At least 37 records · Page 2Linked to original sources

arXiv2018

Measurement of optical constants of TiN and TiN/Ti/TiN multilayer films for microwave kinetic inductance photon-number-resolving detectors

We deposit thin titanium-nitride (TiN) and TiN/Ti/TiN multilayer films on sapphire substrates and measure the reflectance and transmittance in the wavelength range from 400 nm to 2000 nm using a spectrophotometer. The optical constants (complex refractive indices), including the refractive index n and the extinction coefficient k, have been derived. With the extracted refractive indices, we propose an optical stack structure using low-loss amorphous Si (a-Si) anti-reflective coating and a backside aluminum (Al) reflecting mirror, which can in theory achieve 100% photon absorption at 1550 nm. The proposed optical design shows great promise in enhancing the optical efficiency of TiN-based microwave kinetic inductance photon-number-resolving detectors.

physics.optics↗

arXiv2017

Superconducting micro-resonator arrays with ideal frequency spacing and extremely low frequency collision rate

We present a wafer trimming technique for producing superconducting micro-resonator arrays with highly uniform frequency spacing. With the light-emitting diode (LED) mapper technique demonstrated previously, we first map the measured resonance frequencies to the physical resonators. Then, we fine-tune each resonator's frequency by lithographically trimming a small length, calculated from the deviation of the measured frequency from its design value, from the interdigitated capacitor. We demonstrate this technique on a 127-resonator array made of titanium-nitride (TiN) and show that the uniformity of frequency spacing is greatly improved. The array yield in terms of frequency collisions improves from 84% to 97%, while the quality factors and noise properties are unaffected. The wafer trimming technique provides an easy-to-implement tool to improve the yield and multiplexing density of large resonator arrays, which is important for various applications in photon detection and quantum computing.

physics.ins-det↗

arXiv2017

Quantum routing of single photons with whispering-gallery resonators

Quantum routing of single photons in a system with two waveguides coupled to two whispering-gallery resonators (WGRs) are investigated theoretically. With a real-space full quantum theory, photonic scattering amplitudes along four ports of the waveguide network are analytically obtained. It is shown that, by adjusting the geometric and physical parameters of the two-WGR configuration, the quantum routing properties of single photons along the present waveguide network can be controlled effectively. For example, the routing capability from input waveguide to another one can significantly exceed 0.5 near the resonance point of scattering spectra, which can be achieved with only one resonator. By properly designing the distance between two WGRs and the waveguide-WGR coupling strengths, the transfer rate between the waveguides can also reach certain sufficiently high values even in the non-resonance regime. Moreover, Fano-like resonances in the scattering spectra are designable. The proposed system may provide a potential application in controlling single-photon quantum routing as a novel router.

quant-ph↗

arXiv2017

Routing surface plasmons by a quantum-dot nanostructure: nonlinear dispersion effects

Usually, the liner waveguides with single quantum emitters are utilized as routers to construct the quantum network in quantum information processings. Here, we investigate the influence of the nonlinear dispersion on quantum routing of single surface plasmons, between two metal nanowires with a pair of quantum dots. By using a full quantum theory in real space, we obtain the routing probabilities of a single surface plasmon into the four outports of two plasmonic waveguides scattered by a pair of quantum dots. It is shown that, by properly designing the inter-dot distance and the dot-plasmon couplings, the routing capability of the surface plasmons between the plasmonic waveguide channels can be significantly higher than the relevant network formed by the single-emitter waveguides with the linear dispersions. Interestingly, the present quadratic dispersions in the waveguides deliver the manifest Fano-like resonances of the surface-plasmon transport. Therefore, the proposed double-dot configuration could be utilized as a robust quantum router for controlling the surface-plasmon routing in the plasmonic waveguides and a plasmonic Fano-like resonance controller.

cond-mat.mes-hall↗

arXiv2017

Phase-dependent optical response properties in an optomechanical system by coherently driving the mechanical resonator

We explore theoretically the optical response properties in an optomechanical system under electromagneti- cally induced transparency condition but with the mechanical resonator being driven by an additional coherent field. In this configuration, more complex quantum coherent and interference phenomena occur. In partic- ular, we find that the probe transmission spectra depend on the total phase of the applied fields. Our study also provides an efficient way to control propagation of amplification.

quant-ph↗

arXiv2017

Searching for high-frequency gravitational waves by ground high field magnetic resonant sweepings

With laser interferometers, LIGO-Virgo collaboration has recently realized the direct detections of the intermediate-frequency (i.e., from dozens to hundreds of Hertz) gravitational waves (GWs) by probing their mechanically-tidal responses. Alternatively, in this letter we propose a feasible approach to actively search for the high-frequency GWs by probing their electromagnetic responses (EMRs) in a high alternating magnetic field. Differing from the original Gertsenshtein-Zeldovich configuration (in which the EMRs are proportional to the square of the amplitudes of the GWs, and consequently are too weak to be detected experimentally), the EMRs of the GWs passing through the present configuration are linearly related to the amplitudes of the GWs and thus the relevant signals are detectable with the current weak-light detection technique. As the wave impedances of the GWs-induced electromagnetic signals (EMSs) are very different from those the EM radiations in flat space-time, i.e, ($\cong 377 Ω$), the stronger background noises (without any GWs information) could be effectively filtered out by using wave-matching technique. Given the frequency of the applied alternating magnetic field is conveniently adjustable, the configuration proposed here could be utilized to actively search for the GWs (if they really exist) in a sufficiently-wide frequency band (e.g., could be $10^7-10^{12}$Hz), once the scale of the cavity and the sweeping frequency of the applied alternating magnetic field are experimentally achievable.

gr-qc↗

arXiv2017

Cryogenic LED pixel-to-frequency mapper for kinetic inductance detector arrays

We present a cryogenic wafer mapper based on light emitting diodes (LEDs) for spatial mapping of a large microwave kinetic inductance detector (MKID) array. In this scheme, an array of LEDs, addressed by DC wires and collimated through horns onto the detectors, is mounted in front of the detector wafer. By illuminating each LED individually and sweeping the frequency response of all the resonators, we can unambiguously correspond a detector pixel to its measured resonance frequency. We have demonstrated mapping a 76.2 mm 90-pixel MKID array using a mapper containing 126 LEDs with 16 DC bias wires. With the frequency to pixel-position correspondence data obtained by the LED mapper, we have found a radially position-dependent frequency non-uniformity < 1.6% over the 76.2 mm wafer. Our LED wafer mapper has no moving parts and is easy to implement. It may find broad applications in superconducting detector and quantum computing/information experiments.

physics.ins-det↗

arXiv2017

Counting Near Infrared Photons with Microwave Kinetic Inductance Detectors

We demonstrate photon counting at 1550 nm wavelength using microwave kinetic inductance detectors (MKIDs) made from TiN/Ti/TiN trilayer films with superconducting transition temperature Tc ~ 1.4 K. The detectors have a lumped-element design with a large interdigitated capacitor (IDC) covered by aluminum and inductive photon absorbers whose volume ranges from 0.4 um^3 to 20 um^3. We find that the energy resolution improves as the absorber volume is reduced. We have achieved an energy resolution of 0.22 eV and resolved up to 7 photons per pulse, both greatly improved from previously reported results at 1550 nm wavelength using MKIDs. Further improvements are possible by optimizing the optical coupling to maximize photon absorption into the inductive absorber.

physics.ins-det↗

arXiv2016

Stopping waveguide photons with controllable atomic cavity

Slowing/stopping the light travelling in free space with electromagnetically induced transparency to im- plement the optical quantum information processings and store information has been paid much attention in recent years. For the waveguide photons, here, we propose an approach to stop them with a controllable atomic cavity generated by a pair of atomic mirrors; one of them reflects the photon completely and an- other one with the adjustable reflected/transmitted probability of the photons. Based on the full quantum mechanical theory in real space, we show that the reflected/transmitted probability of the waveguide photon with a fixed frequency can be controlled by adjusting the energy-splitting of the driven two-level atomic scatters (i.e., atomic mirrors). As a consequence, the photon can be controllably transmitted/reflected along the waveguide by the aside atomic mirrors with the adjustable atomic energy levels. Ideally, the photons could be stopped in the atomic cavity. This provides a novel mechanism to stop/retravel the waveguide photon in a controllable ways. The feasibility of the proposal with the current integrated optical devices is also discussed.

quant-ph↗

arXiv2016

Enhancing the detection probability of single waveguided-photon by cavity technique

The resonant-cavity-enhanced (RCE) technique is an important approach to increasing the detection efficiency (DE) of typical free-space coupling photons. Here, we show that such a technique can also be utilized to increase the detection probability (DP) of a single waveguide-coupled photon. Based on a fully quantum mechanical theory in real space, we exactly calculated the absorption probability of a single photon for a two-level detector next to the waveguide. We find that the DP of the waveguide photon for the detector in a waveguide-coupled ring cavity is significantly higher than that for the bare detector directly coupled to the photon. Physically, the DP of the photon for the bare detector next to the waveguide is always limited by the finite transmission and reflection probabilities of the photon. The cavity technique is used to store the photon and thus increase its DP. The feasibility of the proposal with current integrated optical devices is then discussed.

quant-ph↗

arXiv2016

Deterministic generations of NOON states via shortcuts to adiabaticity

NOON states play the important roles in quantum information processings and quantum metrology, but the fidelities of these states generated previously are limited typically by the practically-unavoidable decoherence and operational imperfections. Here, we propose an efficient scheme to generate photonic NOON states alternatively by rapid population passage technique via shortcut to adiabaticity (STA), rather than the usual Rabi oscillations. Since the deterministic population passages based on the STAs are insensitive to details of the operations and can be implemented as fast as the Rabi oscillations, the fidelity of the generated NOON state could be satisfactorily high. The feasibility of the proposal is demonstrated specifically with the experimental circuit QED systems by rapidly driving two artifical qutrits.

quant-ph↗

arXiv2015

Does the Berry phase in a quantum optical system originate from the rotating wave approximation

The Berry phase (BP) in a quantized light field demonstrated more than a decade ago (Phys. Rev. Lett. 89, 220404) has attracted considerable attentions, since it plays an important role in the cavity quantum electrodynamics. However, it is argued in a recent paper ( Phys. Rev. Lett. 108, 033601) that such a BP is just due to the rotating wave approximation (RWA) and the relevant BP should vanish beyond this approximation. Based on a consistent analysis we conclude in this letter that the BP in a generic Rabi model actually exists, no matter whether the RWA is applied. The existence of BP is also generalized to a three-level atom in the quantized cavity field.

quant-ph↗

arXiv2014

High-efficiency single-photon Fock state production by transitionless quantum driving

Single photon source is one of the key devices for optical quantum information processing. Differing from the usual stimulated Raman adiabatic passage to obtain single-photon radiation, here we propose an approach to produce optical Fock state on demand in the usual atom-cavity system by utilizing the technique of transitionless quantum driving. The present proposal effectively suppresses the unwanted but practically unavoidable nonadiabatic transitions in the previous adiabatic schemes. Therefore, the efficiency of Fock state production by the present technique could be significantly high, even in the presence of various atomic and cavity dissipations.

quant-ph↗

arXiv2014

Stark-chirped rapid adiabatic passage in the presence of dissipation for quantum computation

Stark-chirped rapid adiabatic passage (SCRAP) is an important technique used for coherent quantum controls. In this paper we investigate how the practically-existing dissipation of the system influences on the efficiency of the passage, and thus the fidelities of the SCRAP-based quantum gates. With flux-biased Josephson qubits as a specifical example, our results show clearly that the efficiency of the logic gates implemented by SCRAP are robust against the weak dissipation. The influence due to the non-adiabtic transitions between the adiabatic passages is comparatively significantly small. Therefore, the SCRAP-based logic gates should be feasible for the realistic physical systems with noises.

quant-ph↗

arXiv2014

Measuring Hawking Radiation of a Kerr-Newman Black Hole in a Superconducting Transmission Line

Applying a dimensional reduction technique and a coordinates transformation approach, we deduce the Kerr-Newman space-time into a Painlevé-like form, and obtain its corresponding event horizon and the Hawking radiation temperature. We find that, the event horizon of a Kerr-Newman black hole can be simulated in a superconducting transmission line. Moreover, by running some numerical simulation, we confirm that the Hawking radiation of a Kerr-Newman Black Hole can be experimentally measured in a superconducting transmission line.

gr-qc↗

arXiv2013

Single-atom polarizer

Traditional polarizer provides a way to convert an unknown polarization into a specified polarization. According to Malus, the intensity of the transmission is directly proportional to the square of the cosine of angle between the transmission axes of the polarizer and the incident polarization. There, the intensity refers to the collective behavior of many photons. Here we propose a novel approach to realizing polarization-filtering at single-photon level. We discuss how a single planepolarized photon transports through a polarized analyzer generated by a single atom (the so-called "single-atom polarizer"), and provide a single quantum version of Malus's law. We investigate the quantum scattering of a single photon by a controllable four-level atom inside a one-dimensional waveguide. By using real-space theoretical approach, we obtain analytic expressions of the transmission spectrum of the photon. Then, our numerical experiments show that the transmitted probability of the incident photon can be controlled by selecting the polarized-dependent transition configuration of the driven atom. The application of such a single-atom polarizer to linear optical quantum information processing is also discussed.

quant-ph↗

arXiv2013

Microwave transmissions through superconducting coplanar waveguide resonators with different coupling configurations

We design and fabricate two types of superconducting niobium coplanar waveguide microwave resonators with different coupling capacitors on high purity Si substrates. Their microwave transmissions are measured at the temperatures of 20 mK. It is found that these two types of resonators possess significantly-different loaded quality factors; one is $5.6\times{10}^{3}$, and the other is $4.0\times{10}^{4}$. The measured data are fitted well by classical ABCD matrix approach. We found that the transmission peak deviates from the standard Lorentizian with a frequency broadening.

cond-mat.supr-con↗

arXiv2012

Quantum gates implementations in the separated ion-traps by fast laser pulses

An approach is proposed to implement the universal quantum gates between the ions confined individually in the separated traps. Instead of the typical adiabatic operations, performed for manipulating the ion-ion coupling, here the switchable couplings between ions are implemented non-adiabatically by using the fast laser pulses. Consequently, the desirable quantum gates between the ions could be implemented by using only a series of laser pulses. The proposal may be conveniently generalized to the quantum computation with the scalable ion-traps.

quant-ph↗