arXiv subjects

L. Feng

Publications and source records attributed to L. Feng.

224 records · Page 13Linked to original sources

arXiv2011

Morphology, dynamics and plasma parameters of plumes and inter-plume regions in solar coronal holes

Coronal plumes, which extend from solar coronal holes (CH) into the high corona and - possibly - into the solar wind (SW), can now continuously be studied with modern telescopes and spectrometers on spacecraft, in addition to investigations from the ground, in particular, during total eclipses. Despite the large amount of data available on these prominent features and related phenomena, many questions remained unanswered as to their generation and relative contributions to the high-speed streams emanating from CHs. An understanding of the processes of plume formation and evolution requires a better knowledge of the physical conditions at the base of CHs, in plumes and in the surrounding inter-plume regions (IPR). More specifically, information is needed on the magnetic field configuration, the electron densities and temperatures, effective ion temperatures, non-thermal motions, plume cross-sections relative to the size of a CH, the plasma bulk speeds, as well as any plume signatures in the SW. In spring 2007, the authors proposed a study on "Structure and dynamics of coronal plumes and inter-plume regions in solar coronal holes" to the International Space Science Institute (ISSI) in Bern to clarify some of these aspects by considering relevant observations and the extensive literature. This review summarizes the results and conclusions of the study. Stereoscopic observations allowed us to include three-dimensional reconstructions of plumes. Multi-instrument investigations carried out during several campaigns led to progress in some areas, such as plasma densities, temperatures, plume structure and the relation to other solar phenomena, but not all questions could be answered concerning the details of plume generation process(es) and interaction with the SW.

astro-ph.SR↗

arXiv2010

Field-induced multiple metamagnetization in phase transition from paramagnetic austenite to ferromagnetic martensite in MnNi1-xFexGe

Tailoring the phase stability and magnetic structure by combining the antiferromagnetic MnNiGe martensite with ferromagnetic MnFeGe austenite, a magnetic-field-induced martensitic transformation has been achieved in MnNi1-xFexGe system. The doped Fe enables the isolated structural and magnetic transitions of MnNiGe to coincide at room temperature and also establishes ferromagnetic couplings in six-Mn-centering-one-Fe-atom clusters. The ferromagnetic clusters transit the antiferromagnetic state in martensite to a ferromagnetic state and the alloys are further induced to a stronger ferromagnetic state by external field, resulting in a large magnetization difference up to 50 emu/g across the transformation. The field-induced martensitic transformation thus experiences a multiple metamagnetization process.

cond-mat.mtrl-sci↗

arXiv2010

Vacancy-tuned paramagnetic/ferromagnetic martensitic transformation in Mn-poor Mn_{1-x}CoGe alloys

It is shown that a temperature window between the Curie temperatures of martensite and austenite phases around the room temperature can be obtained by a vacancy-tuning strategy in Mn-poor Mn1-xCoGe alloys (0 <= x <= 0.050). Based on this, a martensitic transformation from paramagnetic austenite to ferromagnetic martensite with a large magnetization difference can be realized in this window. This gives rise to a magnetic-field-induced martensitic transformation and a large magnetocaloric effect in the Mn1-xCoGe system. The decrease of the transformation temperature and of the thermal hysteresis of the transformation, as well as the stable Curie temperatures of martensite and austenite, are discussed on the basis of the Mn-poor Co-vacancy structure and the corresponding valence-electron concentration.

cond-mat.mtrl-sci↗

arXiv2009

Solar stereoscopy - where are we and what developments do we require to progress?

Observations from the two STEREO-spacecraft give us for the first time the possibility to use stereoscopic methods to reconstruct the 3D solar corona. Classical stereoscopy works best for solid objects with clear edges. Consequently an application of classical stereoscopic methods to the faint structures visible in the optically thin coronal plasma is by no means straight forward and several problems have to be treated adequately: 1.)First there is the problem of identifying one dimensional structures -e.g. active region coronal loops or polar plumes- from the two individual EUV-images observed with STEREO/EUVI. 2.) As a next step one has the association problem to find corresponding structures in both images. 3.) Within the reconstruction problem stereoscopic methods are used to compute the 3D-geometry of the identified structures. Without any prior assumptions, e.g., regarding the footpoints of coronal loops, the reconstruction problem has not one unique solution. 4.) One has to estimate the reconstruction error or accuracy of the reconstructed 3D-structure, which depends on the accuracy of the identified structures in 2D, the separation angle between the spacecraft, but also on the location, e.g., for east-west directed coronal loops the reconstruction error is highest close to the loop top. 5.) Eventually we are not only interested in the 3D-geometry of loops or plumes, but also in physical parameters like density, temperature, plasma flow, magnetic field strength etc. Helpful for treating some of these problems are coronal magnetic field models extrapolated from photospheric measurements, because observed EUV-loops outline the magnetic field. This feature has been used for a new method dubbed 'magnetic stereoscopy'. As examples we show recent application to active region loops.

astro-ph.SR↗

arXiv2009

Stereoscopic Polar Plume Reconstructions from Stereo/Secchi Images

We present stereoscopic reconstructions of the location and inclination of polar plumes of two data sets based on the two simultaneously recorded images taken by the EUVI telescopes in the SECCHI instrument package onboard the \emph{STEREO (Solar TErrestrial RElations Observatory)} spacecraft. The ten plumes investigated show a superradial expansion in the coronal hole in 3D which is consistent with the 2D results. Their deviations from the local meridian planes are rather small with an average of $6.47^{\circ}$. By comparing the reconstructed plumes with a dipole field with its axis along the solar rotation axis, it is found that plumes are inclined more horizontally than the dipole field. The lower the latitude is, the larger is the deviation from the dipole field. The relationship between plumes and bright points has been investigated and they are not always associated. For the first data set, based on the 3D height of plumes and the electron density derived from SUMER/\emph{SOHO} Si {\sc viii} line pair, we found that electron densities along the plumes decrease with height above the solar surface. The temperature obtained from the density scale height is 1.6 to 1.8 times larger than the temperature obtained from Mg {\sc ix} line ratios. We attribute this discrepancy to a deviation of the electron and the ion temperatures. Finally, we have found that the outflow speeds studied in the O {\sc vi} line in the plumes corrected by the angle between the line of sight and the plume orientation are quite small with a maximum of 10 $\mathrm{km s^{-1}}$. It is unlikely that plumes are a dominant contributor to the fast solar wind.

astro-ph.SR↗

arXiv2008

First Stereoscopic Coronal Loop Reconstructions from Stereo Secchi Images

We present the first reconstruction of the three-dimensional shape of magnetic loops in an active region from two different vantage points based on simultaneously recorded images. The images were taken by the two EUVI telescopes of the SECCHI instrument onboard the recently launched STEREO spacecraft when the heliocentric separation of the two space probes was 12 degrees. We demostrate that these data allow to obtain a reliable three-dimensional reconstruction of sufficiently bright loops. The result is compared with field lines derived from a coronal magnetic field model extrapolated from a photospheric magnetogram recorded nearly simultaneously by SOHO/MDI. We attribute discrepancies between reconstructed loops and extrapolated field lines to the inadequacy of the linear force-free field model used for the extrapolation.

astro-ph↗

arXiv2008

Segmentation of Loops from Coronal EUV Images

We present a procedure which extracts bright loop features from solar EUV images. In terms of image intensities, these features are elongated ridge-like intensity maxima. To discriminate the maxima, we need information about the spatial derivatives of the image intensity. Commonly, the derivative estimates are strongly affected by image noise. We therefore use a regularized estimation of the derivative which is then used to interpolate a discrete vector field of ridge points ``ridgels'' which are positioned on the ridge center and have the intrinsic orientation of the local ridge direction. A scheme is proposed to connect ridgels to smooth, spline-represented curves which fit the observed loops. Finally, a half-automated user interface allows one to merge or split, eliminate or select loop fits obtained form the above procedure. In this paper we apply our tool to one of the first EUV images observed by the SECCHI instrument onboard the recently launched STEREO spacecraft. We compare the extracted loops with projected field lines computed from almost-simultaneously-taken magnetograms measured by the SOHO/MDI Doppler imager. The field lines were calculated using a linear force-free field model. This comparison allows one to verify faint and spurious loop connections produced by our segmentation tool and it also helps to prove the quality of the magnetic-field model where well-identified loop structures comply with field-line projections. We also discuss further potential applications of our tool such as loop oscillations and stereoscopy.

astro-ph↗

arXiv2001

Quasi-local evolution of cosmic gravitational clustering in the weakly non-linear regime

We investigate the weakly non-linear evolution of cosmic gravitational clustering in phase space by looking at the Zel'dovich solution in the discrete wavelet transform (DWT) representation. We show that if the initial perturbations are Gaussian, the relation between the evolved DWT mode and the initial perturbations in the weakly non-linear regime is quasi-local. That is, the evolved density perturbations are mainly determined by the initial perturbations localized in the same spatial range. Furthermore, we show that the evolved mode is monotonically related to the initial perturbed mode. Thus large (small) perturbed modes statistically correspond to the large (small) initial perturbed modes. We test this prediction by using QSO Ly$α$ absorption samples. The results show that the weakly non-linear features for both the transmitted flux and identified forest lines are quasi-localized. The locality and monotonic properties provide a solid basis for a DWT scale-by-scale Gaussianization reconstruction algorithm proposed by Feng & Fang (Feng & Fang, 2000) for data in the weakly non-linear regime. With the Zel'dovich solution, we find also that the major non-Gaussianity caused by the weakly non-linear evolution is local scale-scale correlations. Therefore, to have a precise recovery of the initial Gaussian mass field, it is essential to remove the scale-scale correlations.

astro-ph↗