arXiv subjects

L. Giuntini

Publications and source records attributed to L. Giuntini.

13 recordsLinked to original sources

arXiv2021

Scalable creation of silicon-vacancy color centers in diamond by ion implantation through a 1-$μ$m pinhole

The controlled creation of quantum emitters in diamond represents a major research effort in the fabrication of single-photon devices. Here, we present the scalable production of silicon-vacancy (SiV) color centers in single-crystal diamond by ion implantation. The lateral position of the SiV is spatially controlled by a 1-$μ$m pinhole placed in front of the sample, which can be moved nanometer precise using a piezo stage. The initial implantation position is controlled by monitoring the ion beam position with a camera. Hereby, silicon ions are implanted at the desired spots in an area comparable to the diffraction limit. We discuss the role of ions scattered by the pinhole and the activation yield of the SiV color centers for the creation of single quantum emitters.

quant-ph↗

arXiv2021

Photoluminescence of nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond at room and higher temperatures

Phosphorus-doped diamond is relevant for applications in sensing, optoelectronics and quantum photonics, since the unique optical properties of color centers in diamond can be combined with the n-type conductivity attained by the inclusion of phosphorus. Here, we investigate the photoluminescence signal of the nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond as a function of temperature starting from ambient conditions up to about 100$^\circ$ Celsius, focusing on the zero-phonon line (ZPL). We find that the wavelength and width of the ZPL of the two color centers exhibit a comparable dependence on temperature, despite the strong difference in the photoluminescence spectra. Moreover, the temperature sensitivity of the ZPL of the silicon-vacancy center is not significantly affected by phosphorus-doping, as we infer by comparison with silicon-vacancy centers in electronic-grade single-crystal diamond.

physics.app-ph↗

arXiv2020

Optical properties of silicon-implanted polycrystalline diamond membranes

We investigate the optical properties of polycrystalline diamond membranes containing silicon-vacancy (SiV) color centers in combination with other nano-analytical techniques. We analyze the correlation between the Raman signal, the SiV emission, and the background luminescence in the crystalline grains and in the grain boundaries, identifying conditions for the addressability of single SiV centers. Moreover, we perform a scanning transmission electron microscopy (STEM) analysis, which associates the microscopic structure of the membranes and the evolution of the diamond crystal along the growth direction with the photoluminescence properties, as well as a time-of-flight secondary ion mass spectrometry (ToF-SIMS) to address the distribution of silicon in implanted and un-implanted membranes. The results of the STEM and ToF-SIMS studies are consistent with the outcome of the optical measurements and provide useful insight into the preparation of polycrystalline samples for quantum nano-optics.

physics.app-ph↗

arXiv2016

Finite element analysis of ion-implanted diamond surface swelling

We present experimental results and numerical Finite Element analysis to describe surface swelling due to the creation of buried graphite-like inclusions in diamond substrates subjected to MeV ion implantation. Numerical predictions are compared to experimental data for MeV proton and helium implantations, performed with scanning ion microbeams. Swelling values are measured with white light interferometric profilometry in both cases. Simulations are based on a model which accounts for the through-the-thickness variation of mechanical parameters in the material, as a function of ion type, fluence and energy. Surface deformation profiles and internal stress distributions are analyzed and numerical results are seen to adequately fit experimental data. Results allow us to draw conclusions on structural damage mechanisms in diamond for different MeV ion implantations.

cond-mat.mtrl-sci↗

arXiv2016

Multitechnique characterization of lapis lazuli for provenance study

Lapis Lazuli is one of the oldest precious stone, being used for glyptic as early as 7000 years ago: jewels, amulets, seals and inlays are examples of objects produced using this material. Only few sources of Lapis Lazuli exist in the world due to the low probability of geological conditions in which it can form, so that the possibility to associate the raw material to man-made objects helps to reconstruct trade routes. Since art objects produced using Lapis Lazuli are valuable, only non-destructive investigations can be carried out to identify the provenance of the raw materials. Ionoluminescence (IL) is a good candidate for this task. Similarly to cathodoluminescence (CL), IL consists in the collection of luminescence spectra induced by MeV ion (usually protons) irradiation. The main advantage of IL consists in the possibility of working in air while measuring simultaneously the composition of major and trace element by means of complementary Ion Beam Analysis techniques like PIXE or PIGE (Particle Induce X-ray or Gamma-ray Emission). In the present work a systematic study of the luminescence properties of Lapis Lazuli under charged particles irradiation is reported. In a first phase a multi-technique approach was adopted (CL, SEM with microanalysis, micro-Raman) to characterise luminescent minerals. This characterisation was propaedeutic for IL/PIXE/PIGE measurements carried out on significant areas selected on the basis of results obtained previously. Criteria to identify provenance of Lapis Lazuli from four of the main sources (Afghanistan, Pamir Mountains in Tajikistan, Chile and Siberia) were proposed.

cond-mat.mtrl-sci↗

arXiv2016

Controlled variation of the refractive index in ion-damaged diamond

A fine control of the variation of the refractive index as a function of structural damage is essential in the fabrication of diamond-based optical and photonic devices. We report here about the variation of the real part of the refractive index at lambda=632.8 nm in high quality single crystal diamond damaged with 2 and 3 MeV protons at low-medium fluences (10^13 - 10^17 ions cm^-2). After implanting the samples in 125x125 um^2 areas with a raster scanning ion microbeam, the variation of optical thickness of the implanted regions was measured with laser interferometric microscopy. The results were analyzed with a model based on the specific damage profile. The technique allows the direct fabrication of optical structures in bulk diamond based on the localized variation of the refractive index, which will be explored in future works.

cond-mat.mtrl-sci↗

arXiv2016

IBIC analysis of CdTe/CdS solar cells

This paper reports on the investigation of the electronic properties of a thin film CdS/CdTe solar cell with the Ion Beam Induced Charge (IBIC) technique. The device under test is a thin film (total thickness around 10 um) multilayer heterojunction solar cell, displaying an efficiency of 14% under AM1.5 illumination conditions. The IBIC measurements were carried out using focused 3.150 MeV He ions raster scanned onto the surface of the back electrode. The charge collection efficiency (CCE) maps show inhomogeneous response of the cell to be attributed to the polycrystalline nature of the CdTe bulk material. Finally, the evolution of the IBIC signal vs. the ion fluence was studied in order to evaluate the radiation hardness of the CdS/CdTe solar cells in view of their use in solar modules for space applications.

physics.ins-det↗

arXiv2016

Luminescence centers in proton irradiated single crystal CVD diamond

Diamond displays a large variety of luminescence centers which define its optical properties and can be either created or modified by irradiation. The main purpose of the present work is to study the radiation hardness of several of such centers in homoepitaxial single crystal CVD diamond by following the evolution of photoluminescence and ionoluminescence upon 2 MeV proton irradiation. Luminescence decays were observed with values of the fluence at half of the starting luminescence (F1/2) of the order of 1014 cm-2. The 3H center displayed a non monotonic behavior, with a growing behavior and a subsequent decay with a rather high F1/2 value (in the order of few 1016 cm-2), maintaining at the highest fluences an intensity significantly higher than the blue A-band. A simple model based on a double-exponential trend was defined to fit with satisfactory accuracy the evolution of the 3H center. Several PL centers (namely: 3H, TR12, 491 nm, 494 nm) exhibited clear correlations and anti-correlations in their fluence dependences, which were considered in the attempt to acquire some insight into their possible alternative attributions.

cond-mat.mtrl-sci↗

arXiv2016

Micro and nano-patterning of single-crystal diamond by swift heavy ion irradiation

This paper presents experimental data and analysis of the structural damage caused by swift-heavy ion irradiation of single-crystal diamond. The patterned buried structural damage is shown to generate, via swelling, a mirror-pattern on the sample surface, which remains largely damage-free. While extensive results are available for light ion implantations, this effect is reported here for the first time in the heavy ion regime, where a completely different range of input parameters (in terms of ion species, energy, stopping power, etc.) is available for customized irradiation. The chosen ion species are Au and Br, in the energy range 10-40 MeV. The observed patterns, as characterized by profilometry and atomic force microscopy, are reported in a series of model experiments, which show swelling patterns ranging from a few nm to above 200 nm. Moreover, a systematic phenomenological modelling is presented, in which surface swelling measurements are correlated to buried crystal damage. A comparison is made with data for light ion implantations, showing good compatibility with the proposed models. The modelling presented in this work can be useful for the design and realization of micropatterned surfaces in single crystal diamond, allowing to generate highly customized structures by combining appropriately chosen irradiation parameters and masks.

cond-mat.mtrl-sci↗

arXiv2016

Micro-beam and pulsed laser beam techniques for the micro-fabrication of diamond surface and bulk structures

Micro-fabrication in diamond is involved in a wide set of emerging technologies, exploiting the exceptional characteristics of diamond for application in bio-physics, photonics, radiation detection. Micro ion-beam irradiation and pulsed laser irradiation are complementary techniques, which permit the implementation of complex geometries, by modification and functionalization of surface and/or bulk material, modifying the optical, electrical and mechanical characteristics of the material. In this article we summarize the work done in Florence (Italy) concerning ion beam and pulsed laser beam micro-fabrication in diamond.

cond-mat.mtrl-sci↗

arXiv2016

Evidence of light guiding in ion-implanted diamond

We demonstrate the feasibility of fabricating light-waveguiding microstructures in bulk single-crystal diamond by means of direct ion implantation with a scanning microbeam, resulting in the modulation of the refractive index of the ion-beam damaged crystal. Direct evidence of waveguiding through such buried microchannels is obtained with a phase-shift micro-interferometric method allowing the study of the multi-modal structure of the propagating electromagnetic field. The possibility of defining optical and photonic structures by direct ion writing opens a range of new possibilities in the design of quantum-optical devices in bulk single crystal diamond.

physics.optics↗

arXiv2016

Complex refractive index variation in proton-damaged diamond

An accurate control of the optical properties of single crystal diamond during microfabrication processes such as ion implantation plays a crucial role in the engineering of integrated photonic devices. In this work we present a systematic study of the variation of both real and imaginary parts of the refractive index of single crystal diamond, when damaged with 2 and 3 MeV protons at low-medium fluences (range: 10^15 - 10^17 cm^-2). After implanting in 125x125 um^2 areas with a scanning ion microbeam, the variation of optical pathlength of the implanted regions was measured with laser interferometric microscopy, while their optical transmission was studied using a spectrometric set-up with micrometric spatial resolution. On the basis of a model taking into account the strongly non-uniform damage profile in the bulk sample, the variation of the complex refractive index as a function of damage density was evaluated.

cond-mat.mtrl-sci↗

arXiv2014

Native NIR-emitting single colour centres in CVD diamond

Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known NV centres are characterized by several limitations, thus few other defects have recently been considered. In the present work, we characterize in detail native efficient single colour centres emitting in the near infra-red in both standard IIa single-crystal and electronic-grade polycrystalline commercial CVD diamond samples. In the former case, a high-temperature annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginal beneficial effects on the number and performances of native centres in commercially available samples. Although displaying significant variability in several photo physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes, high emission rates and strongly polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type IIa samples, and offer promising perspectives in diamond-based photonics.

cond-mat.mtrl-sci↗