arXiv subjects

L. Golinka-Bezshyyko

Publications and source records attributed to L. Golinka-Bezshyyko.

5 recordsLinked to original sources

arXiv2026

Operation and performance of the Probe for Luminosity Measurement at LHCb

The Probe for LUminosity MEasurement (PLUME) detector is a dedicated luminosity monitor at the LHCb interaction point. It is a hodoscope comprising 48 Hamamatsu R760 photomultiplier tubes that detect Cherenkov light produced by particles travelling in the direction opposite to the LHCb spectrometer acceptance. PLUME provides real-time, bunch-by-bunch luminosity measurements during LHCb data taking and serves as the primary detector for controlling the luminosity levelling process at LHCb. In addition, its data are used offline, together with other dedicated counters from LHCb sub-systems, to determine the integrated luminosity delivered to the experiment. This paper reports on the detector's operational performance during the 2024-2026 data-taking period of Run 3. The integrated luminosity recorded by the LHCb experiment in $pp$ collisions at $\sqrt{s} = 13.6$ TeV during this period, as measured by the PLUME online luminosity counters for detector performance monitoring, amounts to $\mathcal{L} = (26.71 \pm 1.07)$ fb$^{-1}$. The luminosity values used in physics analyses are determined separately through dedicated offline calibrations based on van der Meer scans and Beam Gas Imaging techniques, and will be reported in a dedicated publication, as they are beyond the scope of this paper.

hep-ex↗

arXiv2026

Demonstrating CBM Capabilities by $Λ$ Baryon Reconstruction in Ni+Ni Collisions with the mCBM Experiment at SIS18 of GSI/FAIR

The Compressed Baryonic Matter (CBM) experiment at the upcoming Facility for Antiproton and Ion Research (FAIR) is a high-rate fixed-target experiment designed to investigate nuclear matter at extreme baryon densities in relativistic nucleus-nucleus collisions. To enable high-statistics measurements of rare probes, CBM is designed to operate at event rates up to 10 MHz. This necessitates the development of fast and radiation-tolerant detectors, self-triggered front-end electronics, a free-streaming data acquisition architecture, and real-time event reconstruction capabilities. Prototype versions and pre-series productions of the CBM detector systems have been deployed in the mini-CBM demonstrator setup mCBM - an experimental precursor comprising sub-components of all major CBM systems, installed at the SIS18 facility of GSI/FAIR within the FAIR Phase-0 program. In 2024, Ni+Ni collisions at a kinetic beam energy of 1.93 AGeV and an average interaction rate of about 250 kHz were successfully recorded. This dataset enables a detailed evaluation of the operational performance of the detector systems as well as the complete CBM data chain, while the reconstruction of rare $Λ$ baryons serves as a natural benchmark. This paper presents the first results on $Λ$ signal reconstruction with the mCBM experiment, demonstrating the readiness of the detector technologies and the data chain for the upcoming full-scale CBM experiment.

physics.ins-det↗

arXiv2017

The active muon shield in the SHiP experiment

The SHiP experiment is designed to search for very weakly interacting particles beyond the Standard Model which are produced in a 400 GeV/c proton beam dump at the CERN SPS. An essential task for the experiment is to keep the Standard Model background level to less than 0.1 event after $2\times 10^{20}$ protons on target. In the beam dump, around $10^{11}$ muons will be produced per second. The muon rate in the spectrometer has to be reduced by at least four orders of magnitude to avoid muon-induced combinatorial background. A novel active muon shield is used to magnetically deflect the muons out of the acceptance of the spectrometer. This paper describes the basic principle of such a shield, its optimization and its performance.

physics.ins-det↗

arXiv2016

LEETECH facility as a flexible source of low energy electrons

A new versatile facility LEETECH for detector R&D, tests and calibration is designed and constructed. It uses electrons produced by the photoinjector PHIL at LAL, Orsay and provides a powerful tool for wide range R&D studies of different detector concepts delivering "mono-chromatic" samples of low energy electrons with adjustable energy and intensity. Among other innovative instrumentation techniques, LEETECH will be used for testing various gaseous tracking detectors and studying new Micromegas/InGrid concept which has very promising characteristics of spatial resolution and can be a good candidate for particle tracking and identification. In this paper the importance and expected characteristics of such facility based on detailed simulation studies are addressed.

physics.ins-det↗

arXiv2015

A facility to Search for Hidden Particles (SHiP) at the CERN SPS

A new general purpose fixed target facility is proposed at the CERN SPS accelerator which is aimed at exploring the domain of hidden particles and make measurements with tau neutrinos. Hidden particles are predicted by a large number of models beyond the Standard Model. The high intensity of the SPS 400~GeV beam allows probing a wide variety of models containing light long-lived exotic particles with masses below ${\cal O}$(10)~GeV/c$^2$, including very weakly interacting low-energy SUSY states. The experimental programme of the proposed facility is capable of being extended in the future, e.g. to include direct searches for Dark Matter and Lepton Flavour Violation.

physics.ins-det↗