SearcharxivSearch

arXiv subjects

L. H. Li

Publications and source records attributed to L. H. Li.

At least 19 recordsLinked to original sources

The PSR J0435+3233 Triple System

The detailed evolution of triple star systems is complicated and poorly known. Based on the optical/infrared and gamma-ray archived data, we identified that the pulsar, PSR~J0435+3233, is a gamma-ray pulsar in a hierarchical triple system, with a helium white dwarf (WD) as a close inner binary companion and a Sun-like star as the distant tertiary. PSR~J0435+3233 and the WD companion are in a circular orbit with a period of $P_{\rm orb1} = 8$~days and an eccentricity of $e=0.00016$.The tertiary is a G-type subgiant with a mass of $0.98(12) M_\odot$ at a distance of $2.1(4)$ kpc from the Earth. By simultaneously fitting the observed spin-period variations of the gamma-ray emission (over 16.7 years) and radio emission (over 4.6 years) from PSR~J0435+3233, the changes of the inner orbital parameters, the Shapiro delay, Gaia astrometry, and the outer companion mass, we determined the outer elliptical orbit for the tertiary, with a period $P_{\rm orb2} \sim 26900$~days and an eccentricity $e_2 = 0.5983$. The outer orbit is either nearly perpendicular to the inner orbit (mutual inclination $\sim 84^\circ$), or exhibits a moderate mutual inclination of $\sim 55^\circ$. For the former geometry, the pulsar, the WD, and the tertiary star have masses of $1.15^{+0.06}_{-0.04} M_\odot$, $0.271^{+0.010}_{-0.006} M_\odot$, and $0.96(4) M_\odot$, respectively; for the latter geometry, the corresponding masses are $1.29^{+0.14}_{-0.11} M_\odot$, $0.296^{+0.022}_{-0.018} M_\odot$, and $1.12^{+0.06}_{-0.05} M_\odot$. This is a unique triple system for detailed multi-band observations and for studying the evolutionary path and dynamic processes of a primordial triple star system. It will ultimately evolve into a system consisting of a neutron star and two white dwarfs.

astro-ph.HE

A pulsar-helium star compact binary system formed by common envelope evolution

A stellar common envelope occurs in a binary system when the atmosphere of an evolving star expands to encompass an orbiting companion object. Such systems are predicted to evolve rapidly, ejecting the stellar envelope and leaving the companion in a tighter orbit around a stripped star. We used radio timing to identify a pulsar, PSR J1928+1815, with a spin period of 10.55 ms in a compact binary system with an orbital period of 3.60 hours. The companion star has 1.0 to 1.6 solar masses, eclipses the pulsar for about 17% of the orbit, and is undetected at other wavelengths, so it is most likely a stripped helium star. We interpret this system as having recently undergone a common envelope phase, producing a compact binary.

astro-ph.HE

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.

astro-ph.IM

First wide field-of-view X-ray observations by a lobster eye focusing telescope in orbit

As a novel X-ray focusing technology, lobster eye micro-pore optics (MPO) feature both a wide observing field of view and true imaging capability, promising sky monitoring with significantly improved sensitivity and spatial resolution in soft X-rays. Since first proposed by Angel (1979), the optics have been extensively studied, developed and trialed over the past decades. In this Letter, we report on the first-light results from a flight experiment of the Lobster Eye Imager for Astronomy ($LEIA$), a pathfinder of the wide-field X-ray telescope of the Einstein Probe mission. The piggyback imager, launched in July 2022, has a mostly un-vignetted field of view of $18.6^\circ \times 18.6^\circ $. Its spatial resolution is in the range of 4$-$7 arcmin in FWHM and the focal spot effective area is 2$-$3 cm$^2$, both showing only mild fluctuations across the field of view. We present images of the Galactic center region, Sco X-1 and the diffuse Cygnus Loop nebular taken in snapshot observations over 0.5$-$4 keV. These are truly wide-field X-ray images of celestial bodies observed, for the first time, by a focusing imaging telescope. Initial analyses of the in-flight data show excellent agreement between the observed images and the on-ground calibration and simulations. The instrument and its characterization are briefly described, as well as the flight experiment. The results provide a solid basis for the development of the present and proposed wide-field X-ray missions using lobster eye MPO.

astro-ph.HE

Giant optical nonlinearity cancellation in quantum wells

Second-order optical nonlinearities can be greatly enhanced by orders of magnitude in resonantly excited nanostructures, theoretically predicted and experimentally investigated in a variety of semiconductor systems. These resonant nonlinearities continually attract attention, particularly in newly discovered materials, but tend not to be as efficient as currently predicted. This limits their exploitation in frequency conversion. Here, we present a clear-cut theoretical and experimental demonstration that the second-order nonlinear susceptibility can vary by orders of magnitude as a result of giant cancellation effects in systems with many confined quantum states. Using terahertz quantum cascade lasers as a model source to investigate interband and intersubband resonant nonlinearities, we show that these giant cancellations are a result of interfering second-order nonlinear contributions of light and heavy hole states. As well as of importance to understand and engineer the resonant optical properties of materials, this work can be employed as a new, extremely sensitive tool to elucidate the bandstructure properties of complex quantum well systems.

physics.optics

Ultrafast terahertz detectors based on three-dimensional meta-atoms

Terahertz (THz) and sub-THz frequency emitter and detector technologies are receiving increasing attention, underpinned by emerging applications in ultra-fast THz physics, frequency-combs technology and pulsed laser development in this relatively unexplored region of the electromagnetic spectrum. In particular, semiconductor-based ultrafast THz receivers are required for compact, ultrafast spectroscopy and communication systems, and to date, quantum well infrared photodetectors (QWIPs) have proved to be an excellent technology to address this given their intrinsic ps-range response However, with research focused on diffraction-limited QWIP structures (lambda/2), RC constants cannot be reduced indefinitely, and detection speeds are bound to eventually meet un upper limit. The key to an ultra-fast response with no intrinsic upper limit even at tens of GHz is an aggressive reduction in device size, below the diffraction limit. Here we demonstrate sub-wavelength (lambda/10) THz QWIP detectors based on a 3D split-ring geometry, yielding ultra-fast operation at a wavelength of around 100 μm. Each sensing meta-atom pixel features a suspended loop antenna that feeds THz radiation in the ~20 m3 active volume. Arrays of detectors as well as single-pixel detectors have been implemented with this new architecture, with the latter exhibiting ultra-low dark currents below the nA level. This extremely small resonator architecture leads to measured optical response speeds - on arrays of 300 devices - of up to ~3 GHz and an expected device operation of up to tens of GHz, based on the measured S-parameters on single devices and arrays.

physics.app-ph

Distributed feedback terahertz frequency quantum cascade lasers with dual periodicity gratings

We have developed terahertz frequency quantum cascade lasers that exploit a double-periodicity distributed feedback grating to control the emission frequency and the output beam direction independently. The spatial refractive index modulation of the gratings necessary to provide optical feedback at a fixed frequency and, simultaneously, a far-field emission pattern centered at controlled angles, was designed through use of an appropriate wavevector scattering model. Single mode THz emission at angles tuned by design between 0° and 50° was realized, leading to an original phase-matching approach, lithographically independent, for highly collimated THz QCLs.

physics.optics

Terahertz quantum cascade lasers with thin resonant-phonon depopulation active regions and surface-plasmon waveguides

We report three-well, resonant-phonon depopulation terahertz quantum cascade lasers with semi-insulating surface-plasmon waveguides and reduced active region (AR) thicknesses. Devices with thicknesses of 10, 7.5, 6, and 5 μm are compared in terms of threshold current density, maximum operating temperature, output power and AR temperature. Thinner ARs are technologically less demanding for epitaxial growth and result in reduced electrical heating of devices. However, it is found that 7.5-μm-thick devices give the lowest electrical power densities at threshold, as they represent the optimal trade-off between low electrical resistance and low threshold gain.

cond-mat.mes-hall

Spontaneous emission control of single quantum dots by electromechanical tuning of a photonic crystal cavity

We demonstrate the control of the spontaneous emission rate of single InAs quantum dots embedded in a double-membrane photonic crystal cavity by the electromechanical tuning of the cavity resonance. Controlling the separation between the two membranes with an electrostatic field we obtain the real-time spectral alignment of the cavity mode to the excitonic line and we observe an enhancement of the spontaneous emission rate at resonance. The cavity has been tuned over 13 nm without shifting the exciton energies. A spontaneous emission enhancement of 4.5 has been achieved with a coupling efficiency of the dot to the mode 92%.

physics.optics

Controlling the charge environment of single quantum dots in a photonic-crystal cavity

We demonstrate that the presence of charge around a semiconductor quantum dot (QD) strongly affects its optical properties and produces non-resonant coupling to the modes of a microcavity. We first show that, besides (multi)exciton lines, a QD generates a spectrally broad emission which efficiently couples to cavity modes. Its temporal dynamics shows that it is related to the Coulomb interaction between the QD (multi)excitons and carriers in the adjacent wetting layer. This mechanism can be suppressed by the application of an electric field, making the QD closer to an ideal two-level system.

cond-mat.mes-hall

Enhanced spontaneous emission in a photonic crystal light-emitting diode

We report direct evidence of enhanced spontaneous emission in a photonic crystal (PhC) light-emitting diode. The device consists of p-i-n heterojunction embedded in a suspended membrane, comprising a layer of self-assembled quantum dots. Current is injected laterally from the periphery to the center of the PhC. A well-isolated emission peak at 1300nm from the PhC cavity mode is observed, and the enhancement of the spontaneous emission rate is clearly evidenced by time-resolved electroluminescence measurements, showing that our diode switches off in a time shorter than the bulk radiative and nonradiative lifetimes

cond-mat.other

YREC: The Yale Rotating Stellar Evolution Code

The stellar evolution code YREC is outlined with emphasis on its applications to helio- and asteroseismology. The procedure for calculating calibrated solar and stellar models is described. Other features of the code such as a non-local treatment of convective core overshoot, and the implementation of a parametrized description of turbulence in stellar models, are considered in some detail. The code has been extensively used for other astrophysical applications, some of which are briefly mentioned at the end of the paper.

astro-ph

Single photonics at telecom wavelengths using nanowire superconducting detectors

Single photonic applications - such as quantum key distribution - rely on the transmission of single photons, and require the ultimate sensitivity that an optical detector can achieve. Single-photon detectors must convert the energy of an optical pulse containing a single photon into a measurable electrical signal. We report on fiber-coupled superconducting single-photon detectors (SSPDs) with specifications that exceed those of avalanche photodiodes (APDs), operating at telecommunication wavelength, in sensitivity, temporal resolution and repetition frequency. The improved performance is demonstrated by measuring the intensity correlation function g(2)(t) of single-photon states at 1300nm produced by single semiconductor quantum dots (QDs).

physics.ins-det

Time resolved measurements on low-density single quantum dots at 1300nm

We present time integrated and time resolved measurements on single In/As quantum dots (QD) emitting at 1300nm, at 10K, embedded in a planar microcavity. We clearly identify a standard spectroscopic signature from single QDs and compare the exciton line width and biexciton (BX) binding energy for several QDs. We present this data for QDs spatially selected by etched mesas and metallic apertures. Time resolved photoluminescence (PL) from single electron-hole recombination in the ground state of the QD is investigated as a function of excitation power and temperature. The measurements reveal the presence of a background emission that delays the PL of excitons in the ground state.

cond-mat.other

2-D Stellar Evolution Code Including Arbitrary Magnetic Fields. I. Mathematical Techniques and Test Cases

A high-precision two-dimensional stellar evolution code has been developed for studying solar variability due to structural changes produced by varying internal magnetic fields of arbitrary configurations. Specifically, we are interested in modeling the effects of a dynamo-type field on the detailed internal structure and on the global parameters of the Sun. The high precision is required both to model very small solar changes (of order of $10^{-4}$) and short time scales (or order of one year). It is accomplished by using the mass coordinate to replace the radial coordinate, by using fixed and adjustable time steps, a realistic stellar atmosphere, elements diffusion, and by adjusting the grid points. We have also built into the code the potential to subsequently include rotation and turbulence. The current code has been tested for several cases, including its ability to reproduce the 1-D results.

astro-ph

A flux tube solar dynamo model based on the competing role of buoyancy and downflows

A magnetic flux tube may be considered both as a separate body and as a confined field. As a field, it is affected both by differential rotation ($Ω$-effect) and cyclonic convection ($α$-effect). As a body, the tube experiences not only a buoyant force, but also a dynamic pressure due to downflows above the tube. These two competing dynamic effects are incorporated into the $α$-$Ω$ dynamo equations through the total magnetic turbulent diffusivity, leading to a flux tube dynamo operating in the convection zone. We analyze and solve the extended dynamo equations in the linear approximation by adopting the observed solar internal rotation and assuming a downflow effect derived from numerical simulations of solar convection zone. The model reproduces: the 22-year cycle period; the extended butterfly diagram with the confinement of strong activity to low heliographic latitudes $|Φ|\le 35^\circ$; the evidence that at low latitudes the radial field is in an approximately $π$ phase lag compared to the toroidal field at the same latitude; the evidence that the poleward branch is in a $π/2$ phase lag with respect to the equatorward branch; and the evidence that most of the magnetic flux is present in an intermittent form, concentrated into strong flux tubes.

astro-ph

3D convection simulations of the outer layers of the Sun using realistic physics

This paper describes a series of 3D simulations of shallow inefficient convection in the outer layers of the Sun. The computational domain is a closed box containing the convection-radiation transition layer, located at the top of the solar convection zone. The most salient features of the simulations are that: i)The position of the lower boundary can have a major effect on the characteristics of solar surface convection (thermal structure, kinetic energy and turbulent pressure). ii)The width of the box has only a minor effect on the thermal structure, but a more significant effect on the dynamics (rms velocities). iii)Between the surface and a depth of 1 Mm, even though the density and pressure increase by an order of magnitude, the vertical correlation length of vertical velocity is always close to 600 km. iv) In this region the vertical velocity cannot be scaled by the pressure or the density scale height. This casts doubt on the applicability of the mixing length theory, not only in the superadiabatic layer, but also in the adjacent underlying layers. v) The final statistically steady state is not strictly dependent on the initial atmospheric stratification.

astro-ph

Inclusion of turbulence in solar modeling

The general consensus is that in order to reproduce the observed solar p-mode oscillation frequencies, turbulence should be included in solar models. However, until now there has not been any well-tested efficient method to incorporate turbulence into solar modeling. We present here two methods to include turbulence in solar modeling within the framework of the mixing length theory, using the turbulent velocity obtained from numerical simulations of the highly superadiabatic layer of the sun at three stages of its evolution. The first approach is to include the turbulent pressure alone, and the second is to include both the turbulent pressure and the turbulent kinetic energy. The latter is achieved by introducing two variables: the turbulent kinetic energy per unit mass, and the effective ratio of specific heats due to the turbulent perturbation. These are treated as additions to the standard thermodynamic coordinates (e.g. pressure and temperature). We investigate the effects of both treatments of turbulence on the structure variables, the adiabatic sound speed, the structure of the highly superadiabatic layer, and the p-mode frequencies. We find that the second method reproduces the SAL structure obtained in 3D simulations, and produces a p-mode frequency correction an order of magnitude better than the first method.

astro-ph