arXiv subjects

L. Jorda

Publications and source records attributed to L. Jorda.

At least 19 recordsLinked to original sources

arXiv2024

Source regions of carbonaceous meteorites and NEOs

The present work aims to determine the source regions of carbonaceous chondrites (CM, CI, CO, CV, CK, CR, CH, CB, or C-ungrouped). We studied 38 individual asteroid families, including young and old ones, and determined their contributions to the NEO populations at metre and kilometre sizes using collisional and orbital models. Our models are in agreement with spectroscopic observations of NEOs, cosmic-ray exposure ages of meteorites, statistics of bolides, infrared emission from dust bands, composition of interplanetary dust particles (IDPs), or abundance of extraterrestrial helium-3. We identified the Veritas, Polana and Eos families as the primary sources of CM/CR, CI and CO/CV/CK chondrites, respectively. Substantial contributions are also expected from CM-like König and CI-like Clarissa, Misa and Hoffmeister families. The source regions of kilometre-sized bodies are generally different. The Adeona family is by far the main source of CM-like NEOs, whereas the Polana (low-i) and Euphrosyne (high-i) families are at the origin of most CI-like NEOs. The Polana family is the likely source of both Ryugu and Bennu. We were able to link spectroscopically and dynamically several NEOs to the Baptistina family. Finally, it appears that the pre-atmospheric flux of carbonaceous chondrites at metre sizes is about the same as that of ordinary chondrites. Given the difference in fall statistics between the two groups (80\% versus 4.4\%), this implies either substantial atmospheric fragmentation of carbonaceous bodies at the level of ${\sim}0.5\,{\rm MPa}$, or destruction by thermal cracking and water desorption. The source regions of most meteorites and kilometre-sized NEOs have now been determined; including some minor classes like enstatite chondrites and achondrites (Nysa, Hungaria), acapulcoites/lodranites (Iannini).

astro-ph.EP↗

arXiv2022

The equilibrium shape of (65) Cybele: primordial or relic of a large impact?

Cybele asteroids constitute an appealing reservoir of primitive material genetically linked to the outer Solar System, and the physical properties of the largest members can be readily accessed by large telescopes. We took advantage of the bright apparition of (65) Cybele in July and August 2021 to acquire high-angular-resolution images and optical light curves of the asteroid with which we aim to analyse its shape and bulk properties. 7 series of images acquired with VLT/SPHERE were combined with optical light curves to reconstruct the shape of the asteroid using the ADAM, MPCD, and SAGE algorithms. The origin of the shape was investigated by means of N-body simulations. Cybele has a volume-equivalent diameter of 263+/-3km and a bulk density of 1.55+/-0.19g.cm-3. Notably, its shape and rotation state are closely compatible with those of a Maclaurin equilibrium figure. The lack of a collisional family associated with Cybele and the higher bulk density of that body with respect to other large P-type asteroids suggest that it never experienced any large disruptive impact followed by rapid re-accumulation. This would imply that its present-day shape represents the original one. However, numerical integration of the long-term dynamical evolution of a hypothetical family shows that it is dispersed by gravitational perturbations and chaotic diffusion over Gyrs of evolution. The very close match between Cybele and an equilibrium figure opens up the possibility that D>260km small bodies from the outer Solar System all formed at equilibrium. However, we cannot rule out an old impact as the origin of the equilibrium shape. Cybele itself is found to be dynamically unstable, implying that it was recently (<1Ga) placed on its current orbit either through slow diffusion from a relatively stable orbit in the Cybele region or, less likely, from an unstable, JFC orbit in the planet-crossing region.

astro-ph.EP↗

arXiv2021

Observed tidal evolution of Kleopatra's outer satellite

The orbit of the outer satellite Alexhelios of (216) Kleopatra is already constrained by adaptive-optics astrometry, obtained with the VLT/SPHERE instrument. However, there is also a preceding occultation event in 1980 attributed to this satellite. Hereinafter, we try to link all observations, spanning 1980--2018. We find the nominal orbit exhibits an unexplained shift by $+60^\circ$ in the true longitude. Using both periodogram analysis and an $\ell = 10$ multipole model suitable for the motion of mutually interacting moons about the irregular body, we confirmed that it is not possible to adjust the respective osculating period $P_2$. Instead, we were forced to use a model with tidal dissipation (and increasing orbital periods) to explain the shift. We also analyzed light curves, spanning 1977--2021, and searched for the expected spin deceleration of Kleopatra. According to our best-fit model, the observed period rate is $\dot P_2 = (1.8\pm 0.1)\cdot 10^{-8}\,{\rm d}\,{\rm d}^{-1}$ and the corresponding time lag $Δt_2 = 42\,{\rm s}$ of tides, for the assumed value of the Love number $k_2 = 0.3$. It is the first detection of tidal evolution for moons orbiting 100-km asteroids. The corresponding dissipation factor $Q$ is comparable with other terrestrial bodies, albeit at a higher loading frequency $2|ω-n|$. We also predict a secular evolution of the inner moon, $\dot P_1 = 5.0\cdot 10^{-8}$, as well as a spin deceleration of Kleopatra, $\dot P_0 = 1.9\cdot 10^{-12}$. In alternative models, with moons captured in the 3:2 mean-motion resonance or more massive moons, the respective values of $Δt_2$ are a factor of 2--3 lower. Future astrometric observations by direct imaging or occultations should allow to distinguish between these models, which is important for the internal structure and mechanical properties of (216) Kleopatra.

astro-ph.EP↗

arXiv2021

(216) Kleopatra, a low density critically rotating M-type asteroid

Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of Kleopatra with high accuracy, hence its density. Methods. We combined our new VLT/SPHERE observations of Kleopatra recorded in 2017 and 2018 with archival data, as well as lightcurve, occultation, and delay-Doppler images, to derive its 3D shape model using two different algorithms (ADAM, MPCD). Furthermore, an N-body dynamical model allowed us to retrieve the orbital elements of the two moons as explained in the accompanying paper. Results. The shape of Kleopatra is very close to an equilibrium dumbbell figure with two lobes and a thick neck. Its volume equivalent diameter (118.75$\pm$1.40) km and mass (2.97$\pm$0.32) 10$^{18}$ kg imply a bulk density of (3.38$\pm$0.50) g cm$^{-3}$. Such a low density for a supposedly metal-rich body indicates a substantial porosity within the primary. This porous structure along with its near-equilibrium shape is compatible with a formation scenario including a giant impact followed by reaccumulation. Kleopatra's current rotation period and dumbbell shape imply that it is in a critically rotating state. The low effective gravity along the equator of the body, together with the equatorial orbits of the moons and possibly rubble-pile structure, opens the possibility that the moons formed via mass shedding. Conclusions. Kleopatra is a puzzling multiple system due to the unique characteristics of the primary. It deserves particular attention in the future, with the Extremely Large Telescopes and possibly a dedicated space mission.

astro-ph.EP↗

arXiv2021

An advanced multipole model for (216) Kleopatra triple system

To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the gravitational field up to the order $\ell = 10$. Its convergence was verified against the `brute-force' algorithm. We computed the coefficients $C_{\ell m},S_{\!\ell m}$ for Kleopatra's shape, assuming a~constant bulk density. For solar-system applications, it was also necessary to implement a variable distance and geometry of observations. Our $χ^2$ metric then accounts for the absolute astrometry, the relative astrometry (2nd moon with respect to 1st), angular velocities, and also silhouettes, constraining the pole orientation. This allowed us to derive the orbital elements of Kleopatra's two moons. Using both archival astrometric data and new VLT/SPHERE observations (ESO LP 199.C-0074), we were able to identify the true periods of the moons, $P_1 = (1.822359\pm0.004156)\,{\rm d}$, $P_2 = (2.745820\pm0.004820)\,{\rm d}$. They orbit very close to the 3:2 mean-motion resonance, but their osculating eccentricities are too small compared to other perturbations (multipole, mutual), so that regular librations of the critical argument are not present. The resulting mass of Kleopatra, $m_1 = (1.49\pm0.16)\cdot10^{-12}\,M_\odot$ or $2.97\cdot10^{18}\,{\rm kg}$, is significantly lower than previously thought. An implication explained in the accompanying paper (Marchis et al.) is that (216) Kleopatra is a critically rotating body.

astro-ph.EP↗

arXiv2021

Ancient and present surface evolution processes in the Ash regionof comet 67P/Churyumov-Gerasimenko

The Rosetta mission provided us with detailed data of the surface of the nucleus of comet 67P/Churyumov-Gerasimenko.In order to better understand the physical processes associated with the comet activity and the surface evolution of its nucleus, we performed a detailed comparative morphometrical analysis of two depressions located in the Ash region. To detect morphological temporal changes, we compared pre- and post-perihelion high-resolution (pixel scale of 0.07-1.75 m) OSIRIS images of the two depressions. We quantified the changes using the dynamic heights and the gravitational slopes calculated from the Digital Terrain Model (DTM) of the studied area using the ArcGIS software before and after perihelion. Our comparative morphometrical analysis allowed us to detect and quantify the temporal changes that occurred in two depressions of the Ash region during the last perihelion passage. We find that the two depressions grew by several meters. The area of the smallest depression (structure I) increased by 90+/-20%, with two preferential growths: one close to the cliff associated with the apparition of new boulders at its foot, and a second one on the opposite side of the cliff. The largest depression (structure II) grew in all directions, increasing in area by 20+/-5%, and no new deposits have been detected. We interpreted these two depression changes as being driven by the sublimation of ices, which explains their global growth and which can also trigger landslides. The deposits associated with depression II reveal a stair-like topography, indicating that they have accumulated during several successive landslides from different perihelion passages. Overall, these observations bring additional evidence of complex active processes and reshaping events occurring on short timescales, such as depression growth and landslides, and on longer timescales, such as cliff retreat.

astro-ph.EP↗

arXiv2021

Evidence for differentiation of the most primitive small bodies

Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D shape, and to study the dynamics of its two satellites. We also model Sylvia's thermal evolution. The shape of Sylvia appears flattened and elongated. We derive a volume-equivalent diameter of 271 +/- 5 km, and a low density of 1378 +/- 45 kg.m-3. The two satellites orbit Sylvia on circular, equatorial orbits. The oblateness of Sylvia should imply a detectable nodal precession which contrasts with the fully-Keplerian dynamics of the satellites. This reveals an inhomogeneous internal structure, suggesting that Sylvia is differentiated. Sylvia's low density and differentiated interior can be explained by partial melting and mass redistribution through water percolation. The outer shell would be composed of material similar to interplanetary dust particles (IDPs) and the core similar to aqueously altered IDPs or carbonaceous chondrite meteorites such as the Tagish Lake meteorite. Numerical simulations of the thermal evolution of Sylvia show that for a body of such size, partial melting was unavoidable due to the decay of long-lived radionuclides. In addition, we show that bodies as small as 130-150 km in diameter should have followed a similar thermal evolution, while smaller objects, such as comets and the KBO Arrokoth, must have remained pristine, in agreement with in situ observations of these bodies. NASA Lucy mission target (617) Patroclus (diameter~140 km) may, however, be differentiated.

astro-ph.EP↗

arXiv2020

FRIPON: A worldwide network to track incoming meteoroids

Context: Until recently, camera networks designed for monitoring fireballs worldwide were not fully automated, implying that in case of a meteorite fall, the recovery campaign was rarely immediate. This was an important limiting factor as the most fragile - hence precious - meteorites must be recovered rapidly to avoid their alteration. Aims: The Fireball Recovery and InterPlanetary Observation Network (FRIPON) scientific project was designed to overcome this limitation. This network comprises a fully automated camera and radio network deployed over a significant fraction of western Europe and a small fraction of Canada. As of today, it consists of 150 cameras and 25 European radio receivers and covers an area of about 1.5 million square kilometers.

astro-ph.IM↗

arXiv2020

Binary asteroid (31) Euphrosyne: Ice-rich and nearly spherical

Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation.

astro-ph.EP↗

arXiv2019

(704) Interamnia: A transitional object between a dwarf planet and a typical irregular-shaped minor body

With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ($D$ $\lesssim$ 200 km) bodies. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling (ADAM) algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Interamnia's volume-equivalent diameter of 332 $\pm$ 6 km implies a bulk density of $ρ$=1.98 $\pm$ 0.68 gcm$^{-3}$ , which suggests that Interamnia - like Ceres and Hygiea - contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 $σ$ level. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ($D$ $\lesssim$ 300km) less massive ($m$ $\lesssim$ 3x10$^{19}$ kg) bodies.

astro-ph.EP↗

arXiv2019

Spitzer Space Telescope observations of bilobate comet 8P/Tuttle

Comet 8P/Tuttle is a Nearly Isotropic Comet (NIC), whose physical properties are poorly known and could be different from those of Ecliptic Comets (EC) owing to their different origin. Two independent observations have shown that 8P has a bilobate nucleus. Our goal is to determine the physical properties of the nucleus (size, shape, thermal inertia, albedo) and coma (water and dust) of 8P/Tuttle. We observed the inner coma of 8P with the infrared spectrograph (IRS) and the infrared camera (MIPS) of the Spitzer Space Telescope (SST). We obtained one spectrum (5-40 $μ$m) on 2 November 2007 and a set of 19 images at 24 $μ$m on 22-23 June 2008 sampling the nucleus rotational period. The data were interpreted using thermal models for the nucleus and the dust coma, and considering 2 possible shape models of the nucleus derived from respectively Hubble Space Telescope visible and Arecibo radar observations. We favor a nucleus shape model composed of 2 contact spheres with respective radii of 2.7+/-0.1 km and 1.1+/-0.1 km and a pole orientation with RA=285+/-12 deg and DEC=+20+/-5 deg. The nucleus has a thermal inertia in the range 0-100 J/K/m^2/s^0.5 and a R-band geometric albedo of 0.042+/-0.008. The water production rate amounts to 1.1+/-0.2x10^28~molecules/s at 1.6 AU from the Sun pre-perihelion, which corresponds to an active fraction of 9%. At the same distance, the $εf ρ$ quantity amounts to 310+/-34 cm at 1.6~AU, and reaches 325+/-36 cm at 2.2~AU post-perihelion. The dust grain temperature is estimated to 258+/-10 K, which is 37 K larger than the thermal equilibrium temperature at 1.6 AU. This indicates that the dust grains contributing to the thermal infrared flux have a typical size of 10 $μ$m. The dust spectrum exhibits broad emissions around 10 $μ$m (1.5-sigma confidence level) and 18 $μ$m (5-sigma confidence level) that we attribute to amorphous pyroxene.

astro-ph.EP↗

arXiv2019

Surface evolution of the Anhur region on comet 67P from high-resolution OSIRIS images

The southern hemisphere of comet 67P/Churyumov-Gerasimenko (67P) became observable by the Rosetta mission in March 2015, a few months before cometary southern vernal equinox. The Anhur region in the southern part of the comet's larger lobe was found to be highly eroded, enriched in volatiles, and highly active. We analyze high-resolution images of the Anhur region pre- and post-perihelion acquired by the OSIRIS imaging system on board the Rosetta mission. The Narrow Angle Camera is particularly useful for studying the evolution in Anhur in terms of morphological changes and color variations.}{Radiance factor images processed by the OSIRIS pipeline were coregistered, reprojected onto the 3D shape model of the comet, and corrected for the illumination conditions. We find a number of morphological changes in the Anhur region that are related to formation of new scarps; removal of dust coatings; localized resurfacing in some areas, including boulders displacements; and vanishing structures, which implies localized mass loss that we estimate to be higher than 50 million kg. The strongest changes took place in and nearby the Anhur canyon-like structure, where significant dust cover was removed, an entire structure vanished, and many boulders were rearranged. All such changes are potentially associated with one of the most intense outbursts registered by Rosetta during its observations, which occurred one day before perihelion passage. Moreover, in the niche at the foot of a new observed scarp, we also see evidence of water ice exposure that persisted for at least six months. The abundance of water ice, evaluated from a linear mixing model, is relatively high (> 20%). Our results confirm that the Anhur region is volatile-rich and probably is the area on 67P with the most pristine exposures near perihelion.

astro-ph.EP↗

arXiv2019

The shape of (7) Iris as evidence of an ancient large impact?

Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{\rm eq}$=214$\pm$5 km, and bulk density $ρ$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities.

astro-ph.EP↗

arXiv2019

Closing the gap between Earth-based and interplanetary mission observations: Vesta seen by VLT/SPHERE

Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale. Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark. Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information. Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces. Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.

astro-ph.EP↗

arXiv2019

The homogeneous internal structure of CM-like asteroid (41) Daphne

Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.

astro-ph.EP↗

arXiv2018

(16) Psyche: A mesosiderite-like asteroid?

Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16) Psyche to set further constraints on its bulk composition and determine its potential meteoritic analog. We observed (16) Psyche with ESO VLT/SPHERE/ZIMPOL as part of our large program (ID 199.C-0074). We used the high angular resolution of these observations to refine Psyche's three-dimensional (3D) shape model and subsequently its density when combined with the most recent mass estimates. In addition, we searched for potential companions around the asteroid. We derived a bulk density of 3.99\,$\pm$\,0.26\,g$\cdot$cm$^{-3}$ for Psyche. While such density is incompatible at the 3-sigma level with any iron meteorites ($\sim$7.8\,g$\cdot$cm$^{-3}$), it appears fully consistent with that of stony-iron meteorites such as mesosiderites (density $\sim$4.25\,$\cdot$cm$^{-3}$). In addition, we found no satellite in our images and set an upper limit on the diameter of any non-detected satellite of 1460\,$\pm$\,200}\,m at 150\,km from Psyche (0.2\%\,$\times$\,R$_{Hill}$, the Hill radius) and 800\,$\pm$\,200\,m at 2,000\,km (3\%\,$\times$\,$R_{Hill}$). Considering that the visible and near-infrared spectral properties of mesosiderites are similar to those of Psyche, there is merit to a long-published initial hypothesis that Psyche could be a plausible candidate parent body for mesosiderites.

astro-ph.EP↗

arXiv2018

Probing the use of spectroscopy to determine the meteoritic analogues of meteors

Determining the source regions of meteorites is one of the major goals of current research in planetary science. Whereas asteroid observations are currently unable to pinpoint the source regions of most meteorite classes, observations of meteors with camera networks and the subsequent recovery of the meteorite may help make progress on this question. The main caveat of such an approach, however, is that the recovery rate of meteorite falls is low, implying that the meteoritic analogues of at least 80% of the observed falls remain unknown. Aims: Spectroscopic observations of bolides may have the potential to mitigate this problem by classifying the incoming material. Methods: To probe the use of spectroscopy to determine the meteoritic analogues of bolides, we collected emission spectra in the visible range (320-880nm) of five meteorite types (H,L,LL,CM,eucrite) acquired in atmospheric entry-like conditions in a plasma wind tunnel at the University of Stuttgart (Germany). A detailed spectral analysis including line identification and mass ratio determinations (Mg/Fe,Na/Fe) was subsequently performed on all spectra. Results: Spectroscopy, via a simple line identification, allows us to distinguish the main meteorite classes (chondrites, achondrites and irons) but does not have the potential to distinguish for example an H from a CM chondrite. Conclusions: The source location within the main belt of the different meteorite classes (H, L, LL, CM, etc.) should continue to be investigated via fireball observation networks. Spectroscopy of incoming bolides only marginally helps precisely classify the incoming material (iron meteorites only). To reach a statistically significant sample of recovered meteorites along with accurate orbits (>100) within a reasonable time frame (10-20 years), the optimal solution may be the spatial extension of existing fireball observation networks.

astro-ph.EP↗

arXiv2017

Tensile Strength of 67P/Churyumov-Gerasimenko Nucleus Material from Overhangs

We directly measure twenty overhanging cliffs on the surface of comet 67P/Churyumov-Gerasimenko extracted from the latest shape model and estimate the minimum tensile strengths needed to support them against collapse under the comet's gravity. We find extremely low strengths of around one Pa or less (one to five Pa, when scaled to a metre length). The presence of eroded material at the base of most overhangs, as well as the observed collapse of two features and implied previous collapse of another, suggests that they are prone to failure and that true material strengths are close to these lower limits (although we only consider static stresses and not dynamic stress from, for example, cometary activity). Thus, a tensile strength of a few pascals is a good approximation for the tensile strength of 67P's nucleus material, which is in agreement with previous work. We find no particular trends in overhang properties with size, over the $\sim10-100$ m range studied here, or location on the nucleus. There are no obvious differences, in terms of strength, height or evidence of collapse, between the populations of overhangs on the two cometary lobes, suggesting that 67P is relatively homogenous in terms of tensile strength. Low material strengths are supportive of cometary formation as a primordial rubble pile or by collisional fragmentation of a small (tens of km) body.

astro-ph.EP↗