arXiv subjects

L. L. Lee

Publications and source records attributed to L. L. Lee.

7 recordsLinked to original sources

arXiv2026

Multiphase images of a powerful supernova-driven wind in the early Universe

Galactic winds are considered a likely driver of rapid quenching in early massive galaxies, but until now there has been no direct evidence that such systems drive winds powerful enough to meaningfully suppress their star-formation. We present resolved cold gas and ionized gas observations of a powerful supernova-driven wind in a massive galaxy 1.1 billion years after the Big Bang (at $z$=5.3). The outflow, likely triggered by ongoing merger activity, is removing gas at twice the rate of star-formation and could plausibly eject all the cold gas from the galaxy within 100 Myr. Our results suggest that powerful merger-driven outflows may be a key mechanism to produce abundant massive quiescent galaxies in the early Universe when a large fraction of massive galaxies are interacting. The mass and energetics of this distant outflow are consistent with nearby starburst-driven superwinds, suggesting that the efficiency of stellar feedback has remained relatively constant over the last 12 billion years of cosmic history.

astro-ph.GA↗

arXiv2026

RotCurves: A PYTHON package for efficient modelling and fitting of galactic rotation curves at high-z

Rotation curves are a fundamental tool in the study of galaxies across cosmic time, and with the advent of large integral field unit (IFU) kinematic surveys there is an increasing need for efficient and flexible modelling tools. We present RotCurves, a parametric forward-modeling tool designed for rotation curve analysis at high-z, correcting for ``beam smearing" by projecting and convolving the beam PSF in the plane of the galaxy. We benchmark RotCurves against the established parametric code dysmalpy using synthetic observations. The typical runtime with RotCurves is a few ~10ms, a factor 250 faster than dysmalpy for a single realization. For well-resolved systems (PSF FWHM < Reff), the mock observed rotation and dispersion curves agree to within 5% up to 3Reff, where most of the discrepancies are in the inner disk. whereas in marginally resolved systems (PSF FWHM > 1.5 Reff) discrepancies increase to up to 15%. Using a built-in MCMC fitting procedure, RotCurves recovers well the intrinsic model parameters across a wide range of galaxy properties and accounting for realistic noise patterns. Systematic biases emerge for the effective radius and for low disk masses (Mdisk < 3x10^9 Msun). We show excellent parameter recovery at high signal-to-noise ratios (S/N > 25), with increasing deviations in parameter recovery at lower S/N. RotCurves is best suited for inclinations of 10 < i < 80. RotCurves is built as an exploratory tool for rapid testing of mass model assumptions, parameter studies and for efficiently processing large samples of observational data from large IFU surveys. The code is publicly available on github.

astro-ph.GA↗

arXiv2025

A large-scale ring galaxy at z = 2.2 revealed by JWST/NIRCam: kinematic observations and analytical modelling

A unique galaxy at z = 2.2, zC406690, has a striking clumpy large-scale ring structure that persists from rest UV to near-infrared, yet has an ordered rotation and lies on the star-formation main sequence. We combine new JWST/NIRCam and ALMA band 4 observations, together with previous VLT/SINFONI integral field spectroscopy and HST imaging to re-examine its nature. The high-resolution H$α$ kinematics are best fitted if the mass is distributed within a ring with total mass $M_{\rm{ring}} = 2 \times 10^{10} M_\odot$ and radius $R_{ring}$ = 4.6 kpc, together with a central undetected mass component (e.g., a "bulge") with a dynamical mass of $M_{bulge} = 8 \times 10^{10} M_\odot$. We also consider a purely flux emitting ring superposed over a faint exponential disk, or a highly "cuspy" dark matter halo, both disfavored against a massive ring model. The low-resolution CO(4-3) line and 142GHz continuum emission imply a total molecular and dust gas masses of $M_{mol,gas} = 7.1 \times 10^{10}M_\odot$ and $M_{dust} = 3 \times 10^8 M_\odot$ over the entire galaxy, giving a dust-to-mass ratio of 0.7%. We estimate that roughly half the gas and dust mass lie inside the ring, and that $\sim 10\%$ of the total dust is in a foreground screen that attenuates the stellar light of the bulge in the rest-UV to near-infrared. Sensitive high-resolution ALMA observations will be essential to confirm this scenario and study the gas and dust distribution.

astro-ph.GA↗

arXiv2023

Evidence for Large-scale, Rapid Gas Inflows in z~2 Star-forming Disks

We report high-quality H$α$/CO, imaging spectroscopy of nine massive (log median stellar mass = 10.65 $M_{\odot}$), disk galaxies on the star-forming, main sequence (henceforth `SFGs'), near the peak of cosmic galaxy evolution ($z\sim$1.1-2.5), taken with the ESO-Very Large Telescope, IRAM-NOEMA and Atacama Large Millimeter/submillimeter Array. We fit the major axis position-velocity cuts with beam-convolved, forward models with a bulge, a turbulent rotating disk, and a dark matter (DM) halo. We include priors for stellar and molecular gas masses, optical light effective radii and inclinations, and DM masses from our previous rotation curve analyses of these galaxies. We then subtract the inferred 2D model-galaxy velocity and velocity dispersion maps from those of the observed galaxies. We investigate whether the residual velocity and velocity dispersion maps show indications for radial flows. We also carry out kinemetry, a model-independent tool for detecting radial flows. We find that all nine galaxies exhibit significant non-tangential flows. In six SFGs, the inflow velocities ($v_r\sim$30-90 km s$^{-1}$, 10%-30% of the rotational component) are along the minor axis of these galaxies. In two cases the inflow appears to be off the minor axis. The magnitudes of the radial motions are in broad agreement with the expectations from analytic models of gravitationally unstable, gas-rich disks. Gravitational torques due to clump and bar formation, or spiral arms, drive gas rapidly inward and result in the formation of central disks and large bulges. If this interpretation is correct, our observations imply that gas is transported into the central regions on ~10 dynamical time scales.

astro-ph.GA↗

arXiv2022

A ~600 pc view of the strongly-lensed, massive main sequence galaxy J0901: a baryon-dominated, thick turbulent rotating disk with a clumpy cold gas ring at z = 2.259

We present a high-resolution kinematic study of the massive main-sequence star-forming galaxy (SFG) SDSS J090122.37+181432.3 (J0901) at z=2.259, using 0.36 arcsec ALMA CO(3-2) and 0.1-0.5 arcsec SINFONI/VLT H-alpha observations. J0901 is a rare, strongly-lensed but otherwise normal massive (log(M_star/M_sun)~11) main sequence SFG, offering a unique opportunity to study a typical massive SFG under the microscope of lensing. Through forward dynamical modeling incorporating lensing deflection, we fit the CO and H-alpha kinematics in the image plane out to about one disk effective radius (R_e ~ 4 kpc) at a ~600pc delensed physical resolution along the kinematic major axis. Our results show high intrinsic dispersions of the cold molecular and warm ionized gas (sig0_mol ~ 40 km/s and sig0_ion ~ 66 km/s) that remain constant out to R_e; a moderately low dark matter fraction (f_DM(R_e) ~ 0.3-0.4) within R_e; and a centrally-peaked Toomre Q-parameter -- agreeing well with the previously established sig0 vs. z, f_DM vs. Sig_baryon, and Q's radial trends using large-sample non-lensed main sequence SFGs. Our data further reveal a high stellar mass concentration within ~1-2 kpc with little molecular gas, and a clumpy molecular gas ring-like structure at R ~ 2-4 kpc, in line with the inside-out quenching scenario. Our further analysis indicates that J0901 had assembled half of its stellar mass only ~400 Myrs before its observed cosmic time, and cold gas ring and dense central stellar component are consistent with signposts of a recent wet compaction event of a highly turbulent disk found in recent simulations.

astro-ph.GA↗

arXiv2022

RC100: Rotation Curves of 100 Massive Star-Forming Galaxies at z=0.6-2.5 Reveal Little Dark Matter on Galactic Scales

We analyze Ha or CO rotation curves (RCs) extending out to several galaxy effective radii for 100 massive, large, star-forming disk galaxies (SFGs) across the peak of cosmic galaxy star formation (z~0.6-2.5), more than doubling the previous sample presented by Genzel et al. (2020) and Price et al. (2021). The observations were taken with SINFONI and KMOS integral-field spectrographs at ESO-VLT, LUCI at LBT, NOEMA at IRAM, and ALMA. We fit the major axis kinematics with beam-convolved, forward models of turbulent rotating disks with bulges embedded in dark matter (DM) halos, including the effects of pressure support. The fraction of dark to total matter within the disk effective radius ($R_e ~ 5 kpc$), $f_DM (R_e)=V_{DM}^2 (R_e)/V_{circ}^2 (R_e)$, decreases with redshift: At z~1 (z~2) the median DM fraction is $0.38\pm 0.23$ ($0.27\pm 0.18$), and a third (half) of all galaxies are "maximal" disks with $f_{DM} (R_e)<0.28$. Dark matter fractions correlate inversely with the baryonic surface density, and the low DM fractions require a flattened, or cored, inner DM density distribution. At z~2 there is ~40% less dark matter mass on average within $R_e$ compared to expected values based on cosmological stellar-mass halo-mass relations. The DM deficit is more evident at high star formation rate (SFR) surface densities ($Σ_{SFR}>2.5 M_{\odot} yr^{-1} kpc^{-2}$) and galaxies with massive bulges ($M_{bulge}>10^{10} M_{\odot}$). A combination of stellar or active galactic nucleus (AGN) feedback, and/or heating due to dynamical friction, either from satellite accretion or clump migration, may drive the DM from cuspy into cored mass distributions. The observations plausibly indicate an efficient build-up of massive bulges and central black holes at z~2 SFGs.

astro-ph.GA↗

arXiv2012

Adsorption of hard spheres: structure and effective density according to the potential distribution theorem

We propose a new type of effective densities via the potential distribution theorem. These densities are for the sake of enabling the mapping of the free energy of a uniform fluid onto that of a nonuniform fluid. The potential distribution theorem gives the work required to insert a test particle into the bath molecules under the action of the external (wall) potential. This insertion work W_ins can be obtained from Monte Carlo (MC) simulation (e.g. from Widom's test particle technique) or from an analytical theory. The pseudo-densities are constructed thusly so that when their values are substituted into a uniform-fluid equation of state (e.g. the Carnahan-Starling equation for the hard-sphere chemical potentials), the MC nonuniform insertion work is reproduced. We characterize the pseudo-density behavior for the hard spheres/hard wall system at moderate to high densities (from ρ^*= 0.5745 to 0.9135). We adopt the MC data of Groot et al. for this purpose. The pseudo-densities show oscillatory behavior out of phase (opposite) to that of the singlet densities. We also construct a new closure-based density functional theory (the star-function based density functional theory) that can give accurate description of the MC density profiles and insertion works. A viable theory is established for several cases in hard sphere adsorption.

cond-mat.soft↗