arXiv subjects

L. Miller

Publications and source records attributed to L. Miller.

At least 19 recordsLinked to original sources

arXiv2026

The DarkLight Experiment at TRIUMF

This paper reports on the commissioning of the DarkLight experiment at the ARIEL superconducting electron linear accelerator located at TRIUMF in Vancouver, Canada. DarkLight was designed to utilize the ARIEL electron beam to search for a new boson, $A^\prime$, which preferentially couples to leptons, with a mass in the range 13-17 MeV/$c^2$. Such a boson could be produced via the $e^-~X\rightarrow e^-~X~A^\prime$ process, and the resulting $A^\prime\rightarrow e^+~e^-$ decay used to reconstruct the invariant mass of the $A^\prime$. The $e^+e^-$ pair is detected using a pair of magnetic spectrometers. Each spectrometer is instrumented with two triple GEM detectors and a scintillating strip hodoscope to trigger the event readout. Electron beam energies between 10 and 30 MeV were used to commission the experiment with a 1$~\mu$m thick carbon target. With both spectrometer polarities set to select electrons, elastic and M{\o}ller scattering were used to examine detector performance and compare with predicted distributions from Monte Carlo simulations. Planned upgrades to the e-linac will allow searches to be made with beam energies up to 50 MeV using a 1$~\mu$m thick tantalum target.

physics.ins-det↗

arXiv2026

Euclid: Precise inference of defocus wavefront error from image diffraction spike measurements

The success of the Euclid cosmological weak lensing measurements requires unprecedented knowledge of the point spread function (PSF) shape. Defocus wavefront errors induce variations in PSF size that directly bias inferred galaxy shapes. We present a rapid, model-independent estimator of the Euclid visible instrument defocus based on measuring subpixel shifts in diffraction spikes from bright stars, arising from the non-mirror-symmetric placement of the telescope spiders. This estimate requires no a-priori PSF model and can be directly inferred from individual survey exposures within seconds. We express defocus as the secondary mirror displacement along the optical axis, $\Delta z$, achieving a per-exposure precision of $\sigma(\Delta z) = 0.022\,\mu\text{m}$ in standard Euclid wide-survey images, corresponding to a peak-to-valley optical-path difference of $0.75\,\text{nm}$. This sensitivity resolves thermally induced shifts, typically 0.1-0.3$\,\mu\text{m}$, and enables tracking of temporal evolution and field-of-view variations when combining exposures within periods of stability. Since July 2024, the Euclid telescope has been exceptionally stable, while changes to defocus are effectively homogeneous across the field of view. By correlating defocus with PSF size, we find that the Euclid DR3 requirement of a fractional PSF size bias of $\left|\Delta R_\mathrm{PSF}^2/R_\mathrm{PSF}^2\right|<10^{-3}$ corresponds to field-averaged secondary mirror displacements exceeding $\langle \Delta z_\mathrm{thr}\rangle = (0.0683 \pm 0.0024)\,\mu\text{m}$. Our estimator provides a robust real-time monitoring tool, supplies a stringent prior for computationally intensive PSF model fitting, and is applicable not only to the Euclid telescope, but to other telescopes whose spider vanes are not mirror-symmetrically arranged.

astro-ph.CO↗

arXiv2026

Euclid: Galaxy SED reconstruction in the PHZ processing function: impact on the PSF and the role of medium-band filters

Weak lensing surveys require accurate correction for the point spread function (PSF) when measuring galaxy shapes. For a diffraction-limited PSF, as arises in space-based missions, this correction depends on each galaxy SED. In the Euclid mission, galaxy SED reconstruction, a tasks of the photometric-redshift processing function (PHZ PF), relies on broad- and medium-band ancillary photometry. The limited wavelength sampling of the Euclid VIS passband and signal-to-noise ratio may affect the reconstruction accuracy and translate into biases in the weak lensing measurements. In this study, we present the methodology, which is employed in the Euclid PHZ PF, for reconstructing galaxy SEDs at 55 wavelengths, sampling the VIS passband every 10 nm, and we assess whether it fulfils the accuracy requirements imposed on the Euclid PSF model. We employ both physics- and data-driven methods, focusing on a new approach of template-based flux correction and Gaussian processes, and we introduce an SED metric whose bias propagates into PSF quadrupole moment errors. Our findings demonstrate that Gaussian processes and template fitting meet the requirements only in specific, but complementary, redshift intervals. We therefore propose a hybrid approach, which leverages both methods. This solution proves to be effective in meeting the Euclid accuracy requirements for most of the redshift range of the survey. Finally, we investigate the impact on the SED reconstruction of a new set of 16 evenly-spaced medium-band filters for the Subaru telescope, providing quasi-spectroscopic coverage of the VIS passband. This study shows promising results, ensuring accurate SED reconstruction and meeting the mission PSF requirements. This work thus provides not only the methodological foundation of galaxy SED reconstruction in the Euclid PHZ PF, but also a roadmap for future improvements using a new medium-band survey.

astro-ph.CO↗

arXiv2025

Euclid Structural-Thermal-Optical Performance

The Euclid system performance is defined in terms of image quality metrics tuned to the weak gravitational lensing (WL) cosmological probe. WL induces stringent requirements on the shape and stability of the VIS instrument system point spread function (PSF). The PSF is affected by error contributions from the telescope, the focal plane and image motion, and is controlled by a global error budget with error allocations to each contributor. Aims. During spacecraft development, we verified through a structural-thermal-optical performance (STOP) analysis that the built and verified telescope with its spacecraft interface meets the in-orbit steady-state and transient image quality requirements. Methods. For the purposes of the STOP analysis, a detailed finite-element mathematical model was set up and a standard set of test cases, both steady-state and transient, was defined, comprising combinations of worst-case boundary conditions. Results. The STOP analysis addressed the interaction of all spacecraft components in transmitting temperature-induced loads that lead to optical train deformation. The results of the prelaunch analysis demonstrated that temperature-induced optical perturbations will be well below the allowable limits for all permitted observing conditions. During the first year in orbit, we used the STOP analysis predictions to help interpret the measured performance as a function of environmental variables. Unpredicted disturbances were discovered and unexpected sensitivities were revealed. In-orbit temperature variations are small (<300 mK) and so are their effects on the telescope structure, but they are detected in the time histories of the image quality metrics and are a non-negligible factor in the PSF stability budget demanded by the WL science. Taking everything into account, our analysis confirms the excellent overall performance of the telescope.

astro-ph.IM↗

arXiv2025

Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations of Galaxies with 3D Modelling

We measure galaxy structural properties and colour gradients using HST images to trace the evolution of galaxy components. We jointly fit 3D bulge and disk models to 2505 galaxies in GOODS-South across seven bands (bvizYJH) to IAB = 25.5, accounting for different component ellipticities and inclination-dependent dust extinction. Extinction strongly affects structural parameters and colour gradients in ~26% of the sample - primarily edge-on galaxies with central obscuration (B-band face-on optical depth tau ~ 4) that reveal clear bulge components in the near-infrared. Despite irregular morphologies, the model captures observed colour gradients well. Bulges at z ~ 1 differ markedly from z ~ 0, with typical Sersic index n ~ 1.0 and bulge-to-disc size ratio Re/hd ~ 0.15, suggesting most galaxies host pseudo-bulges formed via secular evolution. Galaxy ellipticity correlates strongly with disk scale-length and absolute magnitude, partly driven by dust extinction variations. We trace bulge and disk evolution from z ~ 0 to z ~ 2.5: bulges are redder than disks (observed-frame) at z < 1.4, but colours converge at higher redshifts and fainter magnitudes. Redder galaxies show redder cores relative to their outskirts, and brighter galaxies have redder cores.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1): VIS processing and data products

This paper describes the VIS Processing Function (VIS PF) of the Euclid ground segment pipeline, which processes and calibrates raw data from the VIS camera. We present the algorithms used in each processing element, along with a description of the on-orbit performance of VIS PF, based on Performance Verification (PV) and Q1 data. We demonstrate that the principal performance metrics (image quality, astrometric accuracy, photometric calibration) are within pre-launch specifications. The image-to-image photometric scatter is less than $0.8\%$, and absolute astrometric accuracy compared to Gaia is $5$ mas Image quality is stable over all Q1 images with a full width at half maximum (FWHM) of $0.\!^{\prime\prime}16$. The stacked images (combining four nominal and two short exposures) reach $I_\mathrm{E} = 25.6$ ($10\sigma$, measured as the variance of $1.\!^{\prime\prime}3$ diameter apertures). We also describe quality control metrics provided with each image, and an appendix provides a detailed description of the provided data products. The excellent quality of these images demonstrates the immense potential of Euclid VIS data for weak lensing. VIS data, covering most of the extragalactic sky, will provide a lasting high-resolution atlas of the Universe.

astro-ph.IM↗

arXiv2024

Euclid. V. The Flagship galaxy mock catalogue: a comprehensive simulation for the Euclid mission

We present the Flagship galaxy mock, a simulated catalogue of billions of galaxies designed to support the scientific exploitation of the Euclid mission. Euclid is a medium-class mission of the European Space Agency optimised to determine the properties of dark matter and dark energy on the largest scales of the Universe. It probes structure formation over more than 10 billion years primarily from the combination of weak gravitational lensing and galaxy clustering data. The breath of Euclid's data will also foster a wide variety of scientific analyses. The Flagship simulation was developed to provide a realistic approximation to the galaxies that will be observed by Euclid and used in its scientific analyses. We ran a state-of-the-art N-body simulation with four trillion particles, producing a lightcone on the fly. From the dark matter particles, we produced a catalogue of 16 billion haloes in one octant of the sky in the lightcone up to redshift z=3. We then populated these haloes with mock galaxies using a halo occupation distribution and abundance matching approach, calibrating the free parameters of the galaxy mock against observed correlations and other basic galaxy properties. Modelled galaxy properties include luminosity and flux in several bands, redshifts, positions and velocities, spectral energy distributions, shapes and sizes, stellar masses, star formation rates, metallicities, emission line fluxes, and lensing properties. We selected a final sample of 3.4 billion galaxies with a magnitude cut of H_E<26, where we are complete. We have performed a comprehensive set of validation tests to check the similarity to observational data and theoretical models. In particular, our catalogue is able to closely reproduce the main characteristics of the weak lensing and galaxy clustering samples to be used in the mission's main cosmological analysis. (abridged)

astro-ph.CO↗

arXiv2024

Euclid. II. The VIS Instrument

This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information.

astro-ph.IM↗

arXiv2024

Euclid preparation. LIII. LensMC, weak lensing cosmic shear measurement with forward modelling and Markov Chain Monte Carlo sampling

LensMC is a weak lensing shear measurement method developed for Euclid and Stage-IV surveys. It is based on forward modelling in order to deal with convolution by a point spread function (PSF) with comparable size to many galaxies; sampling the posterior distribution of galaxy parameters via Markov Chain Monte Carlo; and marginalisation over nuisance parameters for each of the 1.5 billion galaxies observed by Euclid. We quantified the scientific performance through high-fidelity images based on the Euclid Flagship simulations and emulation of the Euclid VIS images; realistic clustering with a mean surface number density of 250 arcmin$^{-2}$ ($I_{\rm E}<29.5$) for galaxies, and 6 arcmin$^{-2}$ ($I_{\rm E}<26$) for stars; and a diffraction-limited chromatic PSF with a full width at half maximum of $0.^{\!\prime\prime}2$ and spatial variation across the field of view. LensMC measured objects with a density of 90 arcmin$^{-2}$ ($I_{\rm E}<26.5$) in 4500 deg$^2$. The total shear bias was broken down into measurement (our main focus here) and selection effects (which will be addressed elsewhere). We found measurement multiplicative and additive biases of $m_1=(-3.6\pm0.2)\times10^{-3}$, $m_2=(-4.3\pm0.2)\times10^{-3}$, $c_1=(-1.78\pm0.03)\times10^{-4}$, $c_2=(0.09\pm0.03)\times10^{-4}$; a large detection bias with a multiplicative component of $1.2\times10^{-2}$ and an additive component of $-3\times10^{-4}$; and a measurement PSF leakage of $\alpha_1=(-9\pm3)\times10^{-4}$ and $\alpha_2=(2\pm3)\times10^{-4}$. When model bias is suppressed, the obtained measurement biases are close to Euclid requirement and largely dominated by undetected faint galaxies ($-5\times10^{-3}$). Although significant, model bias will be straightforward to calibrate given the weak sensitivity. LensMC is publicly available at https://gitlab.com/gcongedo/LensMC

astro-ph.CO↗

arXiv2024

Euclid: Improving the efficiency of weak lensing shear bias calibration. Pixel noise cancellation and the response method on trial

To obtain an accurate cosmological inference from upcoming weak lensing surveys such as the one conducted by Euclid, the shear measurement requires calibration using galaxy image simulations. We study the efficiency of different noise cancellation methods that aim at reducing the simulation volume required to reach a given precision in the shear measurement. Explicitly, we compared fit methods with different noise cancellations and a method based on responses. We used GalSim to simulate galaxies both on a grid and at random positions in larger scenes. Placing the galaxies at random positions requires their detection, which we performed with SExtractor. On the grid, we neglected the detection step and, therefore, the potential detection bias arising from it. The shear of the simulated images was measured with the fast moment-based method KSB, for which we note deviations from purely linear shear measurement biases. For the estimation of uncertainties, we used bootstrapping as an empirical method. We find that each method we studied on top of shape noise cancellation can further increase the efficiency of calibration simulations. The improvement depends on the considered shear amplitude range and the type of simulations (grid-based or random positions). The response method on a grid for small shears provides the biggest improvement. In the more realistic case of randomly positioned galaxies, we still find an improvement factor of 70 for small shears using the response method. Alternatively, the runtime can be lowered by a factor of 7 already using pixel noise cancellation on top of shape noise cancellation. Furthermore, we demonstrate that the efficiency of shape noise cancellation can be enhanced in the presence of blending if entire scenes are rotated instead of individual galaxies.

astro-ph.CO↗

arXiv2021

Euclid preparation: I. The Euclid Wide Survey

Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced straylight, producing very crisp images. This paper presents the building of the Euclid reference survey: the sequence of pointings of EWS, Deep fields, Auxiliary fields for calibrations, and spacecraft movements followed by Euclid as it operates in a step-and-stare mode from its orbit around the Lagrange point L2. Each EWS pointing has four dithered frames; we simulate the dither pattern at pixel level to analyse the effective coverage. We use up-to-date models for the sky background to define the Euclid region-of-interest (RoI). The building of the reference survey is highly constrained from calibration cadences, spacecraft constraints and background levels; synergies with ground-based coverage are also considered. Via purposely-built software optimized to prioritize best sky areas, produce a compact coverage, and ensure thermal stability, we generate a schedule for the Auxiliary and Deep fields observations and schedule the RoI with EWS transit observations. The resulting reference survey RSD_2021A fulfills all constraints and is a good proxy for the final solution. Its wide survey covers 14,500 square degrees. The limiting AB magnitudes ($5\sigma$ point-like source) achieved in its footprint are estimated to be 26.2 (visible) and 24.5 (near-infrared); for spectroscopy, the H$_\alpha$ line flux limit is $2\times 10^{-16}$ erg cm$^{-2}$ s$^{-1}$ at 1600 nm; and for diffuse emission the surface brightness limits are 29.8 (visible) and 28.4 (near-infrared) mag arcsec$^{-2}$.

astro-ph.CO↗

arXiv2021

CODEX Weak Lensing Mass Catalogue and implications on the mass-richness relation

The COnstrain Dark Energy with X-ray clusters (CODEX) sample contains the largest flux limited sample of X-ray clusters at $0.35 < z < 0.65$. It was selected from ROSAT data in the 10,000 square degrees of overlap with BOSS, mapping a total number of 2770 high-z galaxy clusters. We present here the full results of the CFHT CODEX program on cluster mass measurement, including a reanalysis of CFHTLS Wide data, with 25 individual lensing-constrained cluster masses. We employ $lensfit$ shape measurement and perform a conservative colour-space selection and weighting of background galaxies. Using the combination of shape noise and an analytic covariance for intrinsic variations of cluster profiles at fixed mass due to large scale structure, miscentring, and variations in concentration and ellipticity, we determine the likelihood of the observed shear signal as a function of true mass for each cluster. We combine 25 individual cluster mass likelihoods in a Bayesian hierarchical scheme with the inclusion of optical and X-ray selection functions to derive constraints on the slope $\alpha$, normalization $\beta$, and scatter $\sigma_{\ln \lambda | \mu}$ of our richness-mass scaling relation model in log-space: $\left<\ln \lambda | \mu \right> = \alpha \mu + \beta$, with $\mu = \ln (M_{200c}/M_{\mathrm{piv}})$, and $M_{\mathrm{piv}} = 10^{14.81} M_{\odot}$. We find a slope $\alpha = 0.49^{+0.20}_{-0.15}$, normalization $ \exp(\beta) = 84.0^{+9.2}_{-14.8}$ and $\sigma_{\ln \lambda | \mu} = 0.17^{+0.13}_{-0.09}$ using CFHT richness estimates. In comparison to other weak lensing richness-mass relations, we find the normalization of the richness statistically agreeing with the normalization of other scaling relations from a broad redshift range ($0.0<z<0.65$) and with different cluster selection (X-ray, Sunyaev-Zeldovich, and optical).

astro-ph.CO↗

arXiv2020

X-ray variability analysis of a large series of XMM-Newton + NuSTAR observations of NGC 3227

We present a series of X-ray variability results from a long XMM-Newton + NuSTAR campaign on the bright, variable AGN NGC 3227. We present an analysis of the lightcurves, showing that the source displays typically softer-when-brighter behaviour, although also undergoes significant spectral hardening during one observation which we interpret as due to an occultation event by a cloud of absorbing gas. We spectrally decompose the data and show that the bulk of the variability is continuum-driven and, through rms variability analysis, strongly enhanced in the soft band. We show that the source largely conforms to linear rms-flux behaviour and we compute X-ray power spectra, detecting moderate evidence for a bend in the power spectrum, consistent with existing scaling relations. Additionally, we compute X-ray Fourier time lags using both the XMM-Newton and - through maximum-likelihood methods - NuSTAR data, revealing a strong low-frequency hard lag and evidence for a soft lag at higher frequencies, which we discuss in terms of reverberation models.

astro-ph.HE↗

arXiv2019

Euclid preparation: VI. Verifying the Performance of Cosmic Shear Experiments

Our aim is to quantify the impact of systematic effects on the inference of cosmological parameters from cosmic shear. We present an end-to-end approach that introduces sources of bias in a modelled weak lensing survey on a galaxy-by-galaxy level. Residual biases are propagated through a pipeline from galaxy properties (one end) through to cosmic shear power spectra and cosmological parameter estimates (the other end), to quantify how imperfect knowledge of the pipeline changes the maximum likelihood values of dark energy parameters. We quantify the impact of an imperfect correction for charge transfer inefficiency (CTI) and modelling uncertainties of the point spread function (PSF) for Euclid, and find that the biases introduced can be corrected to acceptable levels.

astro-ph.CO↗

arXiv2019

KiDS+VIKING-450 and DES-Y1 combined: Cosmology with cosmic shear

We present a combined tomographic weak gravitational lensing analysis of the Kilo Degree Survey (KV450) and the Dark Energy Survey (DES-Y1). We homogenize the analysis of these two public cosmic shear datasets by adopting consistent priors and modeling of nonlinear scales, and determine new redshift distributions for DES-Y1 based on deep public spectroscopic surveys. Adopting these revised redshifts results in a $0.8\sigma$ reduction in the DES-inferred value for $S_8$, which decreases to a $0.5\sigma$ reduction when including a systematic redshift calibration error model from mock DES data based on the MICE2 simulation. The combined KV450 + DES-Y1 constraint on $S_8 = 0.762^{+0.025}_{-0.024}$ is in tension with the Planck 2018 constraint from the cosmic microwave background at the level of $2.5\sigma$. This result highlights the importance of developing methods to provide accurate redshift calibration for current and future weak lensing surveys.

astro-ph.CO↗

arXiv2019

The fourth data release of the Kilo-Degree Survey: ugri imaging and nine-band optical-IR photometry over 1000 square degrees

The Kilo-Degree Survey (KiDS) is an ongoing optical wide-field imaging survey with the OmegaCAM camera at the VLT Survey Telescope, specifically designed for measuring weak gravitational lensing by galaxies and large-scale structure. When completed it will consist of 1350 square degrees imaged in four filters (ugri). Here we present the fourth public data release which more than doubles the area of sky covered by data release 3. We also include aperture-matched ZYJHKs photometry from our partner VIKING survey on the VISTA telescope in the photometry catalogue. We illustrate the data quality and describe the catalogue content. Two dedicated pipelines are used for the production of the optical data. The Astro-WISE information system is used for the production of co-added images in the four survey bands, while a separate reduction of the r-band images using the theli pipeline is used to provide a source catalogue suitable for the core weak lensing science case. All data have been re-reduced for this data release using the latest versions of the pipelines. The VIKING photometry is obtained as forced photometry on the theli sources, using a re-reduction of the VIKING data that starts from the VISTA pawprints. Modifications to the pipelines with respect to earlier releases are described in detail. The photometry is calibrated to the Gaia DR2 G band using stellar locus regression. In this data release a total of 1006 square-degree survey tiles with stacked ugri images are made available, accompanied by weight maps, masks, and single-band source lists. We also provide a multi-band catalogue based on r-band detections, including homogenized photometry and photometric redshifts, for the whole dataset. Mean limiting magnitudes (5 sigma in a 2" aperture) are 24.23, 25.12, 25.02, 23.68 in ugri, respectively, and the mean r-band seeing is 0.70".

astro-ph.GA↗

arXiv2018

KiDS+VIKING-450: Cosmic shear tomography with optical+infrared data

We present a tomographic cosmic shear analysis of the Kilo-Degree Survey (KiDS) combined with the VISTA Kilo-Degree Infrared Galaxy Survey (VIKING). This is the first time that a full optical to near-infrared data set has been used for a wide-field cosmological weak lensing experiment. This unprecedented data, spanning $450~$deg$^2$, allows us to improve significantly the estimation of photometric redshifts, such that we are able to include robustly higher-redshift sources for the lensing measurement, and - most importantly - solidify our knowledge of the redshift distributions of the sources. Based on a flat $\Lambda$CDM model we find $S_8\equiv\sigma_8\sqrt{\Omega_{\rm m}/0.3}=0.737_{-0.036}^{+0.040}$ in a blind analysis from cosmic shear alone. The tension between KiDS cosmic shear and the Planck-Legacy CMB measurements remains in this systematically more robust analysis, with $S_8$ differing by $2.3\sigma$. This result is insensitive to changes in the priors on nuisance parameters for intrinsic alignment, baryon feedback, and neutrino mass. KiDS shear measurements are calibrated with a new, more realistic set of image simulations and no significant B-modes are detected in the survey, indicating that systematic errors are under control. When calibrating our redshift distributions by assuming the 30-band COSMOS-2015 photometric redshifts are correct (following the Dark Energy Survey and the Hyper Suprime-Cam Survey), we find the tension with Planck is alleviated. The robust determination of source redshift distributions remains one of the most challenging aspects for future cosmic shear surveys.

astro-ph.CO↗

arXiv2018

A rapid occultation event in NGC 3227

NGC 3227 exhibits rapid flux and spectral variability in the X-ray band. To understand this behaviour we conducted a co-ordinated observing campaign using 320 ks of XMM-Newton exposures together with 160 ks of overlapping NuSTAR observations, spanning a month. Here, we present a rapid variability event that occurs toward the end of the campaign. The spectral hardening event is accompanied by a change in the depth of an unresolved transition array, whose time-dependent behaviour is resolved using the RGS data. This UTA fingerprint allows us to identify this as a transit event, where a clump of gas having NH ~ 5 x 10^22 atoms/ cm^2, log xi ~2 occults ~60% of the continuum photons over the course of approximately a day. This occulting gas is likely associated with clouds in the inner BLR. An additional zone of gas with lower column and higher ionization, matches the outflow velocity of the variable zone, and may represent transmission through the cloud limb.

astro-ph.HE↗