arXiv subjects

L. Petit

Publications and source records attributed to L. Petit.

At least 19 recordsLinked to original sources

arXiv2026

Physics-Informed Graph-Neural Decoding of the Surface Code: the Logical Signal as an Exact Topological Pairing

We develop a physics-informed graph neural network (GNN) decoder for the surface code that solves a discrete Poisson equation on the syndrome graph, with the syndrome as the charge source. We compare four readout architectures for extracting the logical-error probability: a potential-based readout that maps the Poisson field through a multilayer perceptron, two current-based readouts under single- and two-sink Dirichlet boundary conditions, and a diffusion-based variant. Comparing these, we show that the solver's edge current is a pure gradient flow whose harmonic (circulating) part vanishes identically. The logical signal therefore cannot be read as a component of the current itself; it is instead a topological pairing between the syndrome and a boundary-fixed harmonic coordinate that distinguishes the two code boundaries linked by the logical operator. We prove that this pairing is evaluated exactly and in closed form, with no learned readout parameters, as the net current drained between the two boundary sinks. On the rotated surface code under circuit-level depolarising noise, this single closed-form scalar matches the best full-field readout and, at larger code distance, significantly exceeds the single-sink current pool, so that isolating the pairing helps more, not less, as the field grows larger and sparser. The decoder is not intended to surpass minimum-weight perfect matching, near-optimal for this noise model; its contribution is an interpretable characterisation of the logical signal itself.

quant-ph↗

arXiv2025

nuSCOPE: A short-baseline neutrino beam at CERN for high-precision cross-section measurements

A new generation of neutrino cross-section experiments at the GeV scale is crucial in the precision era of oscillation physics and lepton flavor studies. In this document, we present a novel neutrino beam design that leverages the experience and R&D achievements of the NP06/ENUBET and NuTag Collaborations and explore its potential implementation at CERN. This beam enables flux monitoring at the percent level and provides a neutrino energy measurement independent of final state particle reconstruction at the neutrino detector. As a result, it eliminates the two primary sources of systematic uncertainty in cross-section measurements: flux normalization and energy bias caused by nuclear effects. We provide a detailed description of the beam technology and instrumentation, along with an overview of its physics potential, with particular emphasis on cross-sections relevant to DUNE and Hyper-Kamiokande.

hep-ex↗

arXiv2021

Hubbard models with arbitrary structures in programmable optical lattices

We investigate the use of programmable optical lattices for quantum simulation of Hubbard models, determining analytic expressions for the hopping and Hubbard U, finding that they are suitable for emulating strongly correlated systems with arbitrary structures, including those with multiple site basis and impurities. Programmable potentials are highly flexible, with the ability to control the depth and shape of individual sites in the optical lattice dynamically. Quantum simulators of Hubbard models with (1) arbitrary basis are required to represent many real materials of contemporary interest, (2) broken translational symmetry are needed to study impurity physics, and (3) dynamical lattices are needed to investigate strong correlation out of equilibrium. We derive analytic expressions for Hubbard Hamiltonians in programmable potential systems. We find experimental parameters for quantum simulation of Hubbard models with arbitrary basis, concluding that programmable optical lattices are suitable for this purpose. We discuss how programmable optical lattices can be used for quantum simulation of dynamical multi-band Hubbard models that represent complicated compounds, impurities, and non-equilibrium physics.

cond-mat.str-el↗

arXiv2020

Experimental and theoretical study of the correlated compound YbCdSn: Evidence for large magnetoresistance and mass enhancement

The unusual features of topological semimetals arise from its nontrivial band structure. The impact of strong electron correlations on the topological states remains largely unexplored in real materials. Here, we report the magnetotransport properties of YbCdSn single crystals. We found two fundamental experimental evidences of electron correlations through magnetic susceptibility and specific heat. The electron correlations in this compound lead to an intermediate valence state and enhance the effective mass of the charge carriers. This correlated state exhibits large nonsaturating magnetoresistance, low carrier density, magnetic field induced metal-semiconductor-like crossover and a plateau in resistivity at low temperatures. This compound also shows a cusp-like magnetoconductivity at low magnetic field which indicates the presence of weak antilocalization effect. Our band structure calculations of Yb$^{2+}$ state predict YbCdSn to be a topological nodal-line semimetal.

cond-mat.str-el↗

arXiv2020

High-fidelity two-qubit gates in silicon above one Kelvin

Spin qubits in quantum dots define an attractive platform for scalable quantum information because of their compatibility with semiconductor manufacturing, their long coherence times, and the ability to operate at temperatures exceeding one Kelvin. Qubit logic can be implemented by pulsing the exchange interaction or via driven rotations. Here, we show that these approaches can be combined to execute a multitude of native two-qubit gates in a single device, reducing the operation overhead to perform quantum algorithms. We demonstrate, at a temperature above one Kelvin, single-qubit rotations together with the two-qubit gates CROT, CPHASE and SWAP. Furthermore we realize adiabatic, diabatic and composite sequences to optimize the qubit control fidelity and the gate time. We find two-qubit gates that can be executed within 67 ns and by theoretically analyzing the experimental noise sources we predict fidelities exceeding 99%. This promises fault-tolerant operation using quantum hardware that can be embedded with classical electronics for quantum integrated circuits.

cond-mat.mes-hall↗

arXiv2020

Spin relaxation benchmarks and individual qubit addressability for holes in quantum dots

We investigate hole spin relaxation in the single- and multi-hole regime in a 2x2 germanium quantum dot array. We use radiofrequency (rf) charge sensing and observe Pauli Spin-Blockade (PSB) for every second interdot transition up to the (1,5)-(0,6) anticrossing, consistent with a standard Fock-Darwin spectrum. We find spin relaxation times $T_1$ as high as 32 ms for a quantum dot with single-hole occupation and 1.2 ms for a quantum dot occupied by five-holes, setting benchmarks for spin relaxation times for hole quantum dots. Furthermore, we investigate the qubit addressability and sensitivity to electric fields by measuring the resonance frequency dependence of each qubit on gate voltages. We are able to tune the resonance frequency over a large range for both the single and multi-hole qubit. Simultaneously, we find that the resonance frequencies are only weakly dependent on neighbouring gates, and in particular the five-hole qubit resonance frequency is more than twenty times as sensitive to its corresponding plunger gate. The excellent individual qubit tunability and long spin relaxation times make holes in germanium promising for addressable and high-fidelity spin qubits in dense two-dimensional quantum dot arrays for large-scale quantum information.

cond-mat.mes-hall↗

arXiv2020

Tunable coupling and isolation of single electrons in silicon metal-oxide-semiconductor quantum dots

Extremely long coherence times, excellent single-qubit gate fidelities and two-qubit logic have been demonstrated with silicon metal-oxide-semiconductor spin qubits, making it one of the leading platforms for quantum information processing. Despite this, a long-standing challenge in this system has been the demonstration of tunable tunnel coupling between single electrons. Here we overcome this hurdle with gate-defined quantum dots and show couplings that can be tuned on and off for quantum operations. We use charge sensing to discriminate between the (2,0) and (1,1) charge states of a double quantum dot and show excellent charge sensitivity. We demonstrate tunable coupling up to 13 GHz, obtained by fitting charge polarization lines, and tunable tunnel rates down to below 1 Hz, deduced from the random telegraph signal. The demonstration of tunable coupling between single electrons in a silicon metal-oxide-semiconductor device provides significant scope for high-fidelity two-qubit logic toward quantum information processing with standard manufacturing.

cond-mat.mes-hall↗

arXiv2019

A single-hole spin qubit

Qubits based on quantum dots have excellent prospects for scalable quantum technology due to their inherent compatibility with standard semiconductor manufacturing. While early on it was recognized that holes may offer a multitude of favourable properties for fast and scalable quantum control, research thus far has remained almost exclusively restricted to the simpler electron system. However, recent developments with holes have led to separate demonstrations of single-shot readout and fast quantum logic, albeit only in the multi-hole regime. Here, we establish a single-hole spin qubit in germanium and demonstrate the integration of single-shot readout and quantum control. Moreover, we make use of Pauli spin blockade, allowing to arbitrarily set the qubit resonance frequency, while providing large readout windows. We deplete a planar germanium double quantum dot to the last hole, confirmed by radio-frequency reflectrometry charge sensing, and achieve single-shot spin readout. To demonstrate the integration of the readout and qubit operation, we show Rabi driving on both qubits and find remarkable electric control over their resonance frequencies. Finally, we analyse the spin relaxation time, which we find to exceed one millisecond, setting the benchmark for hole-based spin qubits. The ability to coherently manipulate a single hole spin underpins the quality of strained germanium and defines an excellent starting point for the construction of novel quantum hardware.

cond-mat.mes-hall↗

arXiv2019

Universal quantum logic in hot silicon qubits

Quantum computation requires many qubits that can be coherently controlled and coupled to each other. Qubits that are defined using lithographic techniques are often argued to be promising platforms for scalability, since they can be implemented using semiconductor fabrication technology. However, leading solid-state approaches function only at temperatures below 100 mK, where cooling power is extremely limited, and this severely impacts the perspective for practical quantum computation. Recent works on spins in silicon have shown steps towards a platform that can be operated at higher temperatures by demonstrating long spin lifetimes, gate-based spin readout, and coherent single-spin control, but the crucial two-qubit logic gate has been missing. Here we demonstrate that silicon quantum dots can have sufficient thermal robustness to enable the execution of a universal gate set above one Kelvin. We obtain single-qubit control via electron-spin-resonance (ESR) and readout using Pauli spin blockade. We show individual coherent control of two qubits and measure single-qubit fidelities up to 99.3 %. We demonstrate tunability of the exchange interaction between the two spins from 0.5 up to 18 MHz and use this to execute coherent two-qubit controlled rotations (CROT). The demonstration of `hot' and universal quantum logic in a semiconductor platform paves the way for quantum integrated circuits hosting the quantum hardware and their control circuitry all on the same chip, providing a scalable approach towards practical quantum information.

cond-mat.mes-hall↗

arXiv2019

Quantum Dot Arrays in Silicon and Germanium

Electrons and holes confined in quantum dots define an excellent building block for quantum emergence, simulation, and computation. In order for quantum electronics to become practical, large numbers of quantum dots will be required, necessitating the fabrication of scaled structures such as linear and 2D arrays. Group IV semiconductors contain stable isotopes with zero nuclear spin and can thereby serve as excellent host for spins with long quantum coherence. Here we demonstrate group IV quantum dot arrays in silicon metal-oxide-semiconductor (SiMOS), strained silicon (Si/SiGe) and strained germanium (Ge/SiGe). We fabricate using a multi-layer technique to achieve tightly confined quantum dots and compare integration processes. While SiMOS can benefit from a larger temperature budget and Ge/SiGe can make ohmic contact to metals, the overlapping gate structure to define the quantum dots can be based on a nearly identical integration. We realize charge sensing in each platform, for the first time in Ge/SiGe, and demonstrate fully functional linear and two-dimensional arrays where all quantum dots can be depleted to the last charge state. In Si/SiGe, we tune a quintuple quantum dot using the N+1 method to simultaneously reach the few electron regime for each quantum dot. We compare capacitive cross talk and find it to be the smallest in SiMOS, relevant for the tuning of quantum dot arrays. These results constitute an excellent base for quantum computation with quantum dots and provide opportunities for each platform to be integrated with standard semiconductor manufacturing.

cond-mat.mes-hall↗

arXiv2018

Spin lifetime and charge noise in hot silicon quantum dot qubits

We investigate the magnetic field and temperature dependence of the single-electron spin lifetime in silicon quantum dots and find a lifetime of 2.8 ms at a temperature of 1.1 K. We develop a model based on spin-valley mixing and find that Johnson noise and two-phonon processes limit relaxation at low and high temperature respectively. We also investigate the effect of temperature on charge noise and find a linear dependence up to 4 K. These results contribute to the understanding of relaxation in silicon quantum dots and are promising for qubit operation at elevated temperatures.

cond-mat.mes-hall↗

arXiv2017

A Crossbar Network for Silicon Quantum Dot Qubits

The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. In order to increase the number of qubits to the thousands or millions of qubits needed for practical quantum information we present an architecture based on shared control and a scalable number of lines. Crucially, the control lines define the qubit grid, such that no local components are required. Our design enables qubit coupling beyond nearest neighbors, providing prospects for non-planar quantum error correction protocols. Fabrication is based on a three-layer design to define qubit and tunnel barrier gates. We show that a double stripline on top of the structure can drive high-fidelity single-qubit rotations. Qubit addressability and readout are enabled by self-aligned inhomogeneous magnetic fields induced by direct currents through superconducting gates. Qubit coupling is based on the exchange interaction, and we show that parallel two-qubit gates can be performed at the detuning noise insensitive point. While the architecture requires a high level of uniformity in the materials and critical dimensions to enable shared control, it stands out for its simplicity and provides prospects for large-scale quantum computation in the near future.

cond-mat.mes-hall↗

arXiv2015

Complex magnetism of lanthanide intermetallics unravelled

We explain a profound complexity of magnetic interactions of some technologically relevant gadolinium intermetallics using an ab-initio electronic structure theory which includes disordered local moments and strong $f$-electron correlations. The theory correctly finds GdZn and GdCd to be simple ferromagnets and predicts a remarkably large increase of Curie temperature with pressure of +1.5 K kbar$^{-1}$ for GdCd confirmed by our experimental measurements of +1.6 K kbar$^{-1}$. Moreover we find the origin of a ferromagnetic-antiferromagnetic competition in GdMg manifested by non-collinear, canted magnetic order at low temperatures. Replacing 35\% of the Mg atoms with Zn removes this transition in excellent agreement with longstanding experimental data.

cond-mat.mtrl-sci↗

arXiv2010

Rare Earth Monopnictides and Monochalcogenides from First Principles: Towards an Electronic Phase Diagram of Strongly Correlated Materials

We present results of an ab-initio study of the electronic structure of 140 rare earth compounds. Specifically we predict an electronic phase diagram of the entire range of rare earth monopnictides and monochalcogenides, composed of metallic, semiconducting and heavy fermion-like regions, and exhibiting valency transitions brought about by a complex interplay between ligand chemistry and lanthanide contraction. The calculations exploit the combined effect of a first-principles methodology, which can adequately describe the dual character of electrons, itinerant vs. localized, and high throughput computing made possible by the increasing available computational power. Our findings, including the predicted "intermediate valent" compounds SmO and TmSe, are in overall excellent agreement with the available experimental data. The accuracy of the approach, proven e.g. through the lattice parameters calculated to within 1.5% of the experimental values, and its ability to describe localization phenomena in solids, makes it a competitive atomistic simulation approach in the search for and design of new materials with specific physical properties and possible technological applications.

cond-mat.str-el↗

arXiv2009

Electronic structure and ionicity of actinide oxides from first principles calculations

The ground state electronic structures of the actinide oxides AO, A2O3 and AO2 (A=U, Np, Pu, Am, Cm, Bk, Cf) are determined from first-principles calculations, using the self-interaction corrected local spin-density (SIC-LSD) approximation. Emphasis is put on the degree of f-electron localization, which for AO2 and A2O3 is found to follow the stoichiometry, namely corresponding to A(4+) ions in the dioxide and A(3+) ions in the sesquioxides. In contrast, the A(2+) ionic configuration is not favorable in the monoxides, which therefore become metallic. The energetics of the oxidation and reduction of the actinide dioxides is discussed, and it is found that the dioxide is the most stable oxide for the actinides from Np onwards. Our study reveals a strong link between preferred oxidation number and degree of localization which is confirmed by comparing to the ground state configurations of the corresponding lanthanide oxides. The ionic nature of the actinide oxides emerges from the fact that only those compounds will form where the calculated ground state valency agrees with the nominal valency expected from a simple charge counting.

cond-mat.str-el↗

arXiv2009

Groundstate electronic structure of actinide carbides and nitrides

The self-interaction corrected (SIC) local spin-density approximation (LSD) is used to investigate the groundstate valency configuration of the actinide ions in the actinide mono-carbides, AC (A = U, Np, Pu, Am, Cm), and the actinide mono-nitrides, AN. The electronic structure is characterized by a gradually increasing degree of f-electron localization from U to Cm, with the tendency towards localization being slightly stronger in the (more ionic) nitrides compared to the (more covalent) carbides. The itinerant band-picture is found to be adequate for UC and acceptable for UN, whilst a more complex manifold of competing localized and delocalized f-electron configurations underlies the groundstates of NpC, PuC, AmC, NpN, and PuN. The fully localized 5f-electron configuration is realized in CmC (f7), CmN (f7), and AmN (f6). The observed sudden increase in lattice parameter from PuN to AmN is found to be related to the localization transition. The calculated valence electron densities of states are in good agreement with photoemission data.

cond-mat.str-el↗

arXiv2007

Optimization of Piezoelectric Electrical Generators Powered by Random Vibrations

This paper compares the performances of a vibrationpowered electrical generators using PZT piezoelectric ceramic associated to two different power conditioning circuits. A new approach of the piezoelectric power conversion based on a nonlinear voltage processing is presented and implemented with a particular power conditioning circuit topology. Theoretical predictions and experimental results show that the nonlinear processing technique may increase the power harvested by a factor up to 4 compared to the Standard optimization technique. Properties of this new technique are analyzed in particular in the case of broadband, random vibrations, and compared to those of the Standard interface.

cs.OH↗

arXiv2007

Self-interaction Corrected Local Spin Density Theory of 5f Electron Localization in Actindes

The electronic structures of the actinide elements U, Np, Pu, Am, Cm and Bk are investigated within the self-interaction corrected local spin density approximation. This method allows to describe a dual character of the 5f electrons, some of which occupy localized and core-like states, while the remaining 5f electrons hybridize and form bands. Based on energetics the calculations predict delocalization/paramagnetism in the early actinides, and localization/anti-ferromagnetism in the later actinides. The corresponding calculated equilibrium volumes are in agreement with the experimental values. For Pu and Am, the method wrongly predicts magnetic ordering, but we find that the paramagnetic state gives a better desciption of cohesive properties. Under compression, in the later actinides, a localization-delocalization transition happens gradually as more and more f electrons become band-like with decreasing volume. Pu is already at this transition point at ambient conditions. Delocalization sets in for Am and Bk at a compression of $V\sim 0.75V_0$, for Cm at $V\sim 0.60 V_0$, where V_0 is the equilibrium volume, and the transition is complete for $V\sim 0.4-0.5 V_0$ in these three elements.

cond-mat.str-el↗