arXiv subjects
Publications and source records attributed to L. Popescu.
This document provides input to the update of the European Strategy for Particle Physics in fields that are related to Nuclear Physics as described in the NuPECC Long Range Plan 2024 (arXiv:2503.15575).
The SoLid experiment, short for Search for Oscillations with a Lithium-6 detector, is a new generation neutrino experiment which tries to address the key challenges for high precision reactor neutrino measurements at very short distances from a reactor core and with little or no overburden. The primary goal of the SoLid experiment is to perform a precise measurement of the electron antineutrino energy spectrum and flux and to search for very short distance neutrino oscillations as a probe of eV-scale sterile neutrinos. This paper describes the SoLid detection principle, the mechanical design and the construction of the detector. It then reports on the installation and commissioning on site near the BR2 reactor, Belgium, and finally highlights its performance in terms of detector response and calibration.
The SoLid experiment aims to measure neutrino oscillation at a baseline of 6.4 m from the BR2 nuclear reactor in Belgium. Anti-neutrinos interact via inverse beta decay (IBD), resulting in a positron and neutron signal that are correlated in time and space. The detector operates in a surface building, with modest shielding, and relies on extremely efficient online rejection of backgrounds in order to identify these interactions. A novel detector design has been developed using 12800 5 cm cubes for high segmentation. Each cube is formed of a sandwich of two scintillators, PVT and 6LiF:ZnS(Ag), allowing the detection and identification of positrons and neutrons respectively. The active volume of the detector is an array of cubes measuring 80x80x250 cm (corresponding to a fiducial mass of 1.6 T), which is read out in layers using two dimensional arrays of wavelength shifting fibres and silicon photomultipliers, for a total of 3200 readout channels. Signals are recorded with 14 bit resolution, and at 40 MHz sampling frequency, for a total raw data rate of over 2 Tbit/s. In this paper, we describe a novel readout and trigger system built for the experiment, that satisfies requirements on: compactness, low power, high performance, and very low cost per channel. The system uses a combination of high price-performance FPGAs with a gigabit Ethernet based readout system, and its total power consumption is under 1 kW. The use of zero suppression techniques, combined with pulse shape discrimination trigger algorithms to detect neutrons, results in an online data reduction factor of around 10000. The neutron trigger is combined with a large per-channel history time buffer, allowing for unbiased positron detection. The system was commissioned in late 2017, with successful physics data taking established in early 2018.
The SoLid experiment has been designed to search for an oscillation pattern induced by a light sterile neutrino state, utilising the BR2 reactor of SCK$\bullet$CEN, in Belgium. The detector leverages a new hybrid technology, utilising two distinct scintillators in a cubic array, creating a highly segmented detector volume. A combination of 5 cm cubic polyvinyltoluene cells, with $^6$LiF:ZnS(Ag) sheets on two faces of each cube, facilitate reconstruction of the neutrino signals. % The polyvinyltoluene scintillator is used as an $\overlineν_e$ target for the inverse beta decay of ($\overlineν_e + p \rightarrow e^{+}+n$), with the $^6$LiF:ZnS(Ag) sheets used for associated neutron detection. Scintillation signals are read out by a network of wavelength shifting fibres connected to multipixel photon counters. Whilst the high granularity provides a powerful toolset to discriminate backgrounds; by itself the segmentation also represents a challenge in terms of homogeneity and calibration, for a consistent detector response. The search for this light sterile neutrino implies a sensitivity to distortions of around $\mathcal{O}$(10)\% in the energy spectrum of reactor $\overlineν_e$. Hence, a very good neutron detection efficiency, light yield and homogeneous detector response are critical for data validation. The minimal requirements for the SoLid physics program are a light yield and a neutron detection efficiency larger than 40 PA/MeV/cube and 50 \% respectively. In order to guarantee these minimal requirements, the collaboration developed a rigorous quality assurance process for all 12800 cubic cells of the detector. To carry out the quality assurance process, an automated calibration system called CALIPSO was designed and constructed.
Background: Shell evolution can impact the structure of the nuclei and lead to effects such as shape coexistence. The nuclei around $^{68}$Ni represent an excellent study case, however, spectroscopic information of the neutron-rich, $Z<28$ nuclei is limited. Purpose: The goal is to measure $γ$-ray transitions in $^{66}$Fe, $^{66}$Co and $^{66}$Ni populated in the $β^-$ decay of $^{66}$Mn, to determine absolute $β$-feedings and relative $γ$-decay probabilities and to compare the results with Monte Carlo Shell Model calculations in order to study the influence of the relevant single neutron and proton orbitals occupancies around $Z=28$ and $N=40$. Method: The low-energy structures of $^{65,66}$Fe, $^{66}$Co and $^{66}$Ni were studied in the $β^-$ decay of $^{66}$Mn produced at ISOLDE, CERN. The beam was purified by means of laser resonance ionization and mass separation. The $β$ and $γ$ events detected by three plastic scintillators and two MiniBall cluster germanium detectors, respectively, were correlated in time to build the low-energy excitation schemes and to determine the $β$-decay half-lives of the nuclei. Results: The relative small $β$-decay ground state feeding of $^{66}$Fe obtained in this work is at variant to the earlier studies. Spin and parity $1^+$ was assigned to the $^{66}$Co ground state based on the strong ground state feeding in the decay of $^{66}$Fe as well as in the decay of $^{66}$Co. Experimental log(ft) values, $γ$-ray deexcitation patterns and energies of excited states were compared to Monte Carlo Shell Model calculations. Based on this comparison, spin and parity assignments for the selected number of low-lying states in the $^{66}$Mn to $^{66}$Ni chain were proposed. Conclusions: The $β$-decay chain starting $^{66}$Mn towards $^{66}$Ni, crossing $N=40$, evolves from deformed nuclei to sphericity...
This paper presents a comprehensive optimisation study to maximise the light collection efficiency of scintillating cube elements used in the SoLid detector. Very short baseline reactor experiments, like SoLid, look for active to sterile neutrino oscillation signatures in the anti-neutrino energy spectrum as a function of the distance to the core and energy. Performing a precise search requires high light yield of the scintillating elements and uniformity of the response in the detector volume. The SoLid experiment uses an innovative hybrid technology with two different scintillators: polyvinyltoluene scintillator cubes and $^6$LiF:ZnS(Ag) screens. A precision test bench based on a $^{207}$Bi calibration source has been developed to study improvements on the energy resolution and uniformity of the prompt scintillation signal of antineutrino interactions. A trigger system selecting the 1~MeV conversion electrons provides a Gaussian energy peak and allows for precise comparisons of the different detector configurations that were considered to improve the SoLid detector light collection. The light collection efficiency is influenced by the choice of wrapping material, the position of the $^6$LiF:ZnS(Ag) screen, the type of fibre, the number of optical fibres and the type of mirror at the end of the fibre. This study shows that large gains in light collection efficiency are possible compared to the SoLid SM1 prototype. The light yield for the SoLid detector is expected to be at least 52$\pm$2 photo-avalanches per MeV per cube, with a relative non-uniformity of 6 %, demonstrating that the required energy resolution of at least 14 % at 1 MeV can be achieved.
The SoLid collaboration has developed a new detector technology to detect electron anti-neutrinos at close proximity to the Belgian BR2 reactor at surface level. A 288$\,$kg prototype detector was deployed in 2015 and collected data during the operational period of the reactor and during reactor shut-down. Dedicated calibration campaigns were also performed with gamma and neutron sources. This paper describes the construction of the prototype detector with a high control on its proton content and the stability of its operation over a period of several months after deployment at the BR2 reactor site. All detector cells provide sufficient light yields to achieve a target energy resolution of better than 20%/$\sqrt{E(MeV)}$. The capability of the detector to track muons is exploited to equalize the light response of a large number of channels to a precision of 3% and to demonstrate the stability of the energy scale over time. Particle identification based on pulse-shape discrimination is demonstrated with calibration sources. Despite a lower neutron detection efficiency due to triggering constraints, the main backgrounds at the reactor site were determined and taken into account in the shielding strategy for the main experiment. The results obtained with this prototype proved essential in the design optimization of the final detector. This paper is dedicated to our SCK$\cdot$CEN colleague, Edgar Koonen, who passed away unexpectedly in 2017. Edgar was part of the SoLid collaboration since its inception and his efforts were vital to get the experiment started. He will be duly missed.
The next generation of very-short-baseline reactor experiments will require compact detectors operating at surface level and close to a nuclear reactor. This paper presents a new detector concept based on a composite solid scintillator technology. The detector target uses cubes of polyvinyltoluene interleaved with $^6$LiF:ZnS(Ag) phosphor screens to detect the products of the inverse beta decay reaction. A multi-tonne detector system built from these individual cells can provide precise localisation of scintillation signals, making efficient use of the detector volume. Monte Carlo simulations indicate that a neutron capture efficiency of over 70% is achievable with a sufficient number of $^6$LiF:ZnS(Ag) screens per cube and that an appropriate segmentation enables a measurement of the positron energy which is not limited by gamma-ray leakage. First measurements of a single cell indicate that a very good neutron-gamma discrimination and high neutron detection efficiency can be obtained with adequate triggering techniques. The light yield from positron signals has been measured, showing that an energy resolution of 14%/$\sqrt{E({\mathrm{MeV}})}$ is achievable with high uniformity. A preliminary neutrino signal analysis has been developed, using selection criteria for pulse shape, energy, time structure and energy spatial distribution and showing that an antineutrino efficiency of 40% can be achieved. It also shows that the fine segmentation of the detector can be used to significantly decrease both correlated and accidental backgrounds.
We report the first observation of the 2$^+$ isomer in $^{52}$Co, produced in the $β$ decay of the 0$^+$, $^{52}$Ni ground state. We have observed three $γ$-rays at 849, 1910, and 5185 keV characterizing the $β$ de-excitation of the isomer. We have measured a half-life of 102(6) ms for the isomeric state. The Fermi and Gamow-Teller transition strengths for the $β$ decay of $^{52m}$Co to $^{52}$Fe have been determined. We also add new information on the $β$ decay of the 6$^+$, $^{52}$Co ground state, for which we have measured a half-life of 112(3) ms.
The results of a study of the beta decays of three proton-rich nuclei with $T_z=\text{-}2$, namely $^{48}$Fe, $^{52}$Ni and $^{56}$Zn, produced in an experiment carried out at GANIL, are reported. In all three cases we have extracted the half-lives and the total $β$-delayed proton emission branching ratios. We have measured the individual $β$-delayed protons and $β$-delayed $γ$ rays and the branching ratios of the corresponding levels. Decay schemes have been determined for the three nuclei, and new energy levels are identified in the daughter nuclei. Competition between $β$-delayed protons and $γ$ rays is observed in the de-excitation of the $T=2$ Isobaric Analogue States in all three cases. Absolute Fermi and Gamow-Teller transition strengths have been determined. The mass excesses of the nuclei under study have been deduced. In addition, we discuss in detail the data analysis taking as a test case $^{56}$Zn, where the exotic $β$-delayed $γ$-proton decay has been observed.
Remarkable results have been published recently on the $β$ decay of $^{56}$Zn. In particular, the rare and exotic $β$-delayed $γ$-proton emission has been detected for the first time in the $fp$ shell. Here we focus the discussion on this exotic decay mode and on the observed competition between $β$-delayed protons and $β$-delayed $γ$ rays from the Isobaric Analogue State.
A very exotic decay mode at the proton drip-line, $β$-delayed $γ$-proton decay, has been observed in the $β$ decay of the $T_z$ = -2 nucleus $^{56}$Zn. Three $γ$-proton sequences have been observed following the $β$ decay. The fragmentation of the IAS in $^{56}$Cu has also been observed for the first time. The results were reported in a recent publication. At the time of publication the authors were puzzled by the competition between proton and $γ$ decays from the main component of the IAS. Here we outline a possible explanation based on the nuclear structure properties of the three nuclei involved, namely $^{56}$Zn, $^{56}$Cu and $^{55}$Ni, close to the doubly magic nucleus $^{56}$Ni. From the fragmentation of the Fermi strength and the excitation energy of the two populated 0$^{+}$ states we could deduce the off-diagonal matrix element of the charge-dependent part of the Hamiltonian responsible for the mixing. These results are compared with the decay of $^{55}$Cu with one proton less than $^{56}$Zn. For completeness we summarise the results already published.
A study of the $\beta$ decay of the proton-rich $T_{z}$ = -2 nucleus $^{56}$Zn has been reported in a recent publication. A rare and exotic decay mode, $\beta$-delayed $\gamma$-proton decay, has been observed there for the first time in the $fp$ shell. Here we expand on some of the details of the data analysis, focussing on the charged particle spectrum.
We report the observation of a very exotic decay mode at the proton drip-line, the $β$-delayed $γ$-proton decay, clearly seen in the $β$ decay of the $T_z$ = -2 nucleus $^{56}$Zn. Three $γ$-proton sequences have been observed after the $β$ decay. Here this decay mode, already observed in the $sd$-shell, is seen for the first time in the $fp$-shell. Both $γ$ and proton decays have been taken into account in the estimation of the Fermi (F) and Gamow Teller (GT) strengths. Evidence for fragmentation of the Fermi strength due to strong isospin mixing is found.
The half-lives of the Tz = -2, 56Zn and Tz = -1, 58Zn isotopes and other nuclei were measured in a β-decay experiment at GANIL. The energy levels populated by the 56Zn β decay were determined. The 56Zn results are compared with the results of the mirror process, the charge exchange reaction 56Fe(3He,t)56Co.
The pygmy dipole resonance has been studied in the proton-magic nucleus 124Sn with the (a,a'g) coincidence method at E=136 MeV. The comparison with results of photon-scattering experiments reveals a splitting into two components with different structure: one group of states which is excited in (a,a'g) as well as in (g,g') reactions and a group of states at higher energies which is only excited in (g,g') reactions. Calculations with the self-consistent relativistic quasiparticle time-blocking approximation and the quasiparticle phonon model are in qualitative agreement with the experimental results and predict a low-lying isoscalar component dominated by neutron-skin oscillations and a higher-lying more isovector component on the tail of the giant dipole resonance.
Aims. The aim of this work is to identify and study spectral features in the quasar 3C 273 usually blended by its strong jet emission. Method. A historic minimum in the sub-millimetre emission of 3C 273 triggered coordinated multi-wavelength observations in June 2004. X-ray observations from the INTEGRAL, XMM-Newton and RXTE satellites are complemented by ground-based optical, infrared, millimetre and radio observations. The overall spectrum is used to model the infrared and X-ray spectral components. Results. Three thermal dust emission components are identified in the infrared. The dust emission on scales from 1 pc to several kpc is comparable to that of other quasars, as expected by AGN unification schemes. The observed weakness of the X-ray emission supports the hypothesis of a synchrotron self-Compton origin for the jet component. There is a clear soft-excess and we find evidence for a very broad iron line which could be emitted in a disk around a Kerr black hole. Other signatures of a Seyfert-like X-ray component are not detected.