arXiv subjects

L. Serafini

Publications and source records attributed to L. Serafini.

27 records · Page 2Linked to original sources

arXiv2011

Coupling of Laser-Generated Electrons with Conventional Accelerator Devices

Laser-based electron acceleration is attracting strong interest from the conventional accelerator community due to its outstanding characteristics in terms of high initial energy, low emittance and high beam current. Unfortunately, such beams are currently not comparable to those of conventional accelerators, limiting their use for the manifold applications that a traditional accelerator can have. Besides working on the plasma source itself, a promising approach to shape the laser-generated beams is coupling them with conventional accelerator elements in order to benefit from both, a versatile electron source and a controllable beam. In this paper we show that some parameters commonly used by the particle accelerator community must be reconsidered when dealing with laser-plasma beams. Starting from the parameters of laser-generated electrons which can be obtained nowadays by conventional multi hundred TW laser systems, we compare different conventional magnetic lattices able to capture and transport those GeV electrons. From this comparison we highlight some important limit of the state-of-the-art plasma generated electrons with respect to conventional accelerator ones. Eventually we discuss an application of such beams in undulators for Free Electron Lasers (FELs), which is one of the most demanding applications in terms of beam quality.

physics.acc-ph↗

arXiv2010

Multi-GeV Electron Spectrometer

The advance in laser plasma acceleration techniques pushes the regime of the resulting accelerated particles to higher energies and intensities. In particular the upcoming experiments with the FLAME laser at LNF will enter the GeV regime with almost 1pC of electrons. From the current status of understanding of the acceleration mechanism, relatively large angular and energy spreads are expected. There is therefore the need to develop a device capable to measure the energy of electrons over three orders of magnitude (few MeV to few GeV) under still unknown angular divergences. Within the PlasmonX experiment at LNF a spectrometer is being constructed to perform these measurements. It is made of an electro-magnet and a screen made of scintillating fibers for the measurement of the trajectories of the particles. The large range of operation, the huge number of particles and the need to focus the divergence present unprecedented challenges in the design and construction of such a device. We will present the design considerations for this spectrometer and the first results from a prototype.

physics.ins-det↗

arXiv2006

Design considerations for table-top, laser-based VUV and X-ray free electron lasers

A recent breakthrough in laser-plasma accelerators, based upon ultrashort high-intensity lasers, demonstrated the generation of quasi-monoenergetic GeV-electrons. With future Petawatt lasers ultra-high beam currents of ~100 kA in ~10 fs can be expected, allowing for drastic reduction in the undulator length of free-electron-lasers (FELs). We present a discussion of the key aspects of a table-top FEL design, including energy loss and chirps induced by space-charge and wakefields. These effects become important for an optimized table-top FEL operation. A first proof-of-principle VUV case is considered as well as a table-top X-ray-FEL which may open a brilliant light source also for new ways in clinical diagnostics.

physics.acc-ph↗

arXiv2003

Toward an architecture for quantum programming

It is becoming increasingly clear that, if a useful device for quantum computation will ever be built, it will be embodied by a classical computing machine with control over a truly quantum subsystem, this apparatus performing a mixture of classical and quantum computation. This paper investigates a possible approach to the problem of programming such machines: a template high level quantum language is presented which complements a generic general purpose classical language with a set of quantum primitives. The underlying scheme involves a run-time environment which calculates the byte-code for the quantum operations and pipes it to a quantum device controller or to a simulator. This language can compactly express existing quantum algorithms and reduce them to sequences of elementary operations; it also easily lends itself to automatic, hardware independent, circuit simplification. A publicly available preliminary implementation of the proposed ideas has been realized using the C++ language.

cs.PL↗

arXiv2001

Photoinjector design for the LCLS

The design of the Linac Coherent Light Source assumes that a low-emittance, 1-nC, 10-ps beam will be available for injection into the 15-GeV linac. The proposed rf photocathode injector that will provide a 150-MeV beam with rms normalized emittances of 1 mm in both the transverse and longitudinal dimensions is based on a 1.6-cell S-band rf gun that is equipped with an emittance compensating solenoid. The booster accelerator is positioned at the beam waist coinciding with the first emittance maximum and is provided with an accelerating gradient of ~25 MeV/m, i.e., the "new working point." The uv pulses required for cathode excitation will be generated by tripling the output of a Ti:sapphire laser system consisting of a highly stable cw mode-locked oscillator and two bow-tie amplifiers pumped by a pair of Q-switched Nd:YAG lasers. The large bandwidth of the Ti:sapphire system accommodates the desired temporal pulse shaping. Details of the design and the supporting simulations are presented.

physics.acc-ph↗

arXiv2000

The FaBrE Project at Trieste

A program to design a high brilliance electron source suitable for a short wavelength Linac-based FEL is presented. The goal of the project is to develop a multi-cell integrated photoinjector capable of delivering 1 nC bunches with emittance below 1 mm mrad. This will be the first step toward a possible development of a IV generation light source test facility based on the existing Trieste Linac. For this purpose a common program between Sincrotrone Trieste and INFN-Milano has been undertaken. Here a brief description of the program and the first results of the RF Gun electromagnetic structure with the beam dynamics on the ELETTRA Linac are presented.

physics.acc-ph↗

arXiv2000

New Design Study and Related Experimental Program for the LCLS RF Photoinjector

We report the results of a recent beam dynamics study, motivated by the need to redesign the LCLS photoinjector, that lead to the discovery of a new effective working point for a split RF photoinjector. We consider the emittance compensation regime of a space charge beam: by increasing the solenoid strength, the emittance evolution shows a double minimum behavior in the drifting region. If the booster is located where the relative emittance maximum and the envelope waist occur, the second emittance minimum can be shifted to the booster exit and frozen at a very low level (0.3 mm-mrad for a 1 nC flat top bunch), to the extent that the invariant envelope matching conditions are satisfied. Standing Wave Structures or alternatively Traveling Wave Structures embedded in a Long Solenoid are both candidates as booster linac. A careful measurement of the emittance evolution as a function of position in the drifting region is necessary to verify the computation and to determine experimentally the proper position of the booster cavities. The new design study and supporting experimental program under way at the SLAC Gun Test Facility are discussed.

physics.acc-ph↗

arXiv1998

Multi-cell RF Injectors Driven by Thermoionic Cathodes

We present the anticipated performances of a multi-cell RF injector operated either with a thermoionic cathode or with a gated photo-cathode. By means of a magnetic compression and a Coherent Spontaneous Emission seeded FEL radiating at 100 to 200 mm, the system produces a beam fully bunched with a 200 A peak current at 2 mm.mrad rms emittance. The electron bunch is a few FEL buckets long and phase-locked to the RF so to make this device an ideal injector for second generation plasma acceleration experiments.

physics.acc-ph↗

arXiv1998

Multi-Bunch Dynamics in RF Photoinjectors Through an Envelope Equation Approach

Free Electron Lasers driven by Super-Conducting Linacs require the generation, acceleration and transport of trains of bunches with high charge, high repetition rate and low emittance. A numerical model already developed for the modeling of beam dynamics in SC Linacs has been now extended to treat RF guns with proper description of the photocathode bunch generation. The model algorithm is based on a coupled integration of Newton and Maxwell equations under a slowly varying envelope approximation for the time evolution of mode amplitudes in the accelerating structure and an envelope equation description for a set of bunch slices. In this way beam loading effects and higher order modes excitation can be studied. The application to the TTF-FEL injector as a particular design is presented and the optimization according to the invariant envelope concept is discussed, in the frame of single bunch calculations compared to the results of other multi-particle codes.

physics.acc-ph↗