SearcharxivSearch

arXiv subjects

L. V. C. Assali

Publications and source records attributed to L. V. C. Assali.

11 recordsLinked to original sources

First principles electric field gradients at A and B site cations across the NaRTiO4 Ruddlesden Popper series

The $n = 1$ Ruddlesden-Popper titanates, NaRTiO$_{4}$ (R = rare-earth), exhibit a structural behaviour where non-centrosymmetry is driven by cooperative oxygen octahedral rotations (OORs) rather than conventional second-order Jahn-Teller distortions. In this work, we present an \textit{ab-initio} investigation of the structural, electronic and hyperfine properties of the entire NaRTiO$_{4}$ series across the two disputed ground states, $Pbcm$ and $P\bar{4}2_1m$, and the high temperature $P4/nmm$ symmetries. Our results reveal an ionic-radius-dependent evolution from a tilt-dominated regime for small rare-earth ions to a distortion-dominated regime for larger cations, leading to an asymptotic regime in which the high-temperature phase becomes increasingly competitive with the ground-state structures as the ionic radius increases. In parallel, the electronic band gap follows a systematic evolution across the series, reflecting the underlying structural changes and the increasing dominance of octahedral distortions at larger ionic radii. The Electric Field Gradient (EFG) tensor reveals that, in the large-radius limit, all symmetries tend locally towards a similar environment. Away from this limit, the EFG tensor for different symmetries progressively diverges, providing a sensitive probe for phase transitions and revealing symmetry-specific fingerprints, particularly for the rare-earth and Ti sites. By establishing these EFG signatures, this work provides a roadmap for experimental techniques, such as Nuclear Magnetic Resonance (NMR) and Perturbed Angular Correlation (PAC), to resolve the ground-state symmetry of these structures.

cond-mat.mtrl-sci

Probing $Ca_3Ti_2O_7$ crystal structure at the atomic level: Insights from $^{111m}Cd/^{111}Cd$ PAC spectroscopy and ab-initio studies

Perturbed angular correlation spectroscopy combined with $ab-initio$ electronic structure calculations is used to unravel the structural phase transition path from the low-temperature polar structure to the high-temperature structural phase in $Ca_3Ti_2O_7$, a hybrid improper ferroelectric. This procedure explores the unique features of a local probe environment approach by monitoring the evolution of the electric field gradient tensor at the calcium sites. The local environments, observed above 1057 K, confirm a structural phase transition from the $A2_1am$ symmetry to an orthorhombic $Acaa$ symmetry in the $Ca_3Ti_2O_7$ crystal lattice, disagreeing with the frequently reported avalanche structural transition from the polar $A2_1am$ phase to the aristotype $I4/mmm$ phase. Moreover, the EFG temperature dependency, within the $A2_1am$ temperature stability, is shown to be sensitive to the recently proposed $Ca_3Ti_2O_7$ ferroelectric polarization decrease within the 500-800~K temperature range.

cond-mat.mtrl-sci

Pressure-Induced Phase Transformations of Quasi-2D Sr$_3$Hf$_2$O$_7$

We present an \textit{ab-initio} study of the quasi-2D layered perovskite Sr$_3$Hf$_2$O$_7$ com\-pound, performed within the framework of the Density Functional Theory and lattice dynamics analysis. At high temperatures, this compound takes a \textit{I4/mmm} centrosym\-met\-ric structure (S.G. n. 139); as the temperature is lowered, the symmetry is broken into other intermediate polymorphs before reaching the ground state structure, which is the \textit{Cmc2$_1$} ferroelectric phase (S.G. n. 36). One of these intermediate polymorphs is the \textit{Ccce} structural phase (S.G. n. 68). Additionally, we have probed the \textit{C2/c} system (S.G n. 15), which was obtained by following the atomic displacements corresponding to the eigenvectors of the imaginary frequency mode localized at the $\mathbfΓ$-point of the \textit{Ccce} phase. By observing the enthalpies at low pressures, we found that the \textit{Cmc2$_1$} phase is thermodynamically the most stable. Our results show that the \textit{I4/mmm} and \textit{C2/c} phases never stabilize in the 0-20 GPa range of pressure values. On the other hand, the \textit{Ccce} phase becomes energetically more stable at around 17 GPa, surpassing the \textit{Cmc2$_1$} structure. By considering the effect of entropy and the constant-volume free energies, we observe that the \textit{Cmc2$_1$} polymorph is energetically the most stable phase at low temperature; however, at 350 K the \textit{Ccce} system becomes the most stable. By probing the volume-dependent free energies at 19 GPa, we see that \textit{Ccce} is always the most stable phase between the two structures and also throughout the studied temperature range. When analyzing the phonon dispersion frequencies, we conclude that the \textit{Ccce} system becomes dynamically stable only around 19-20 GPa, and that the \textit{Cmc2$_1$} phase, is metastable up to 30 GPa.

cond-mat.mtrl-sci

Carbon-related Bilayers: Nanoscale Building Blocks for Self-Assembly Nanomanufacturing

Using a first-principles total energy methodology, we investigated the properties of graphene-like carbon mono and bilayers, functionalized with nitrogen and boron atoms. The resulting stable structures were explored in terms of their potential use as nanoscale two-dimensional building blocks for self-assembly of macroscopic structures. We initially considered graphene monolayers functionalized with nitrogen and boron, but none of them was dynamically stable, in terms of the respective layer phonon spectra. Then, we considered the functionalized graphene-like bilayers (labeled as NCCN, NCNC, BCCB, and NCCB), analyzing their stability, electronic and mechanical properties, and chemical reactivity. We found that while the NCCN, NCNC, and NCCB bilayers were stable, the BCCB one was not. Additionally, the NCCN and NCCB bilayers were explored as potential two-dimensional building blocks for nanostructure self-assembly, which could form stable bulk structures. Particularly, the NCCB bilayer seemed the best choice as a building block, since the resulting 3D crystals, formed by stacking NCCB bilayers, were energetically stable.

cond-mat.mtrl-sci

Lanthanide impurities in wide bandgap semiconductors: a possible roadmap for spintronic devices

The electronic properties of lanthanide (from Eu to Tm) impurities in wurtzite gallium nitride and zinc oxide were investigated by first principles calculations, using an all electron methodology plus a Hubbard potential correction. The results indicated that the 4f-related energy levels remain outside the bandgap in both materials, in good agreement with a recent phenomenological model, based on experimental data. Additionally, zinc oxide doped with lanthanide impurities became an n-type material, showing a coupling between the 4f-related spin polarized states and the carriers. This coupling may generate spin polarized currents, which could lead to applications in spintronic devices.

cond-mat.mtrl-sci

Stability and plasticity of silicon nanowires: the role of wire perimeter

We investigated the properties of stability and plasticity of silicon nanowires using molecular dynamics simulations. We considered nanowires with <100>, <110> and <112> growth directions with several diameters and surface facet configurations. We found that the wire perimeter, and not the wire diameter, is the meaningful dimensional parameter. As a result, the surface facets play a central role on the nanowire energy, that follows a universal scaling law. Additionally, we have computed the response of a silicon nanowire to external load. The results were compared to available experimental and ab initio data.

cond-mat.mtrl-sci

3d transition metal impurities in diamond: electronic properties and chemical trends

First principles calculations have been used to investigate the trends on the properties of isolated 3d transition metal impurities (from Sc to Cu) in diamond. Those impurities have small formation energies in the substitutional or double semi-vacancy sites, and large energies in the interstitial one. Going from Sc to Cu, the 3d-related energy levels in the bandgap move from the top of the bandgap toward the valence band in all three sites. Trends in electronic properties and transition energies of the impurities, in the substitutional or interstitial sites, are well described by a simple microscopic model considering the electronic occupation of the 3d-related levels. On the other hand, for the impurities in the double semi-vacancy site, there is a weak interaction between the divacancy- and the 3d-related orbitals, resulting in in vacancy- and 3d-related levels in the materials bandgap.

cond-mat.mtrl-sci

Cobalt-related impurity centers in diamond: electronic properties and hyperfine parameters

Cobalt-related impurity centers in diamond have been studied using first principles calculations. We computed the symmetry, formation and transition energies, and hyperfine parameters of cobalt impurities in isolated configurations and in complexes involving vacancies and nitrogen atoms. We found that the Co impurity in a divacant site is energetically favorable and segregates nitrogen atoms in its neighborhood. Our results were discussed in the context of the recently observed Co-related electrically active centers in synthetic diamond.

physics.comp-ph

Spin states of iron impurities in magnesium oxide under pressure: A possible intermediate state

Ferropericlase (Mg,Fe)O is a major lower mantle mineral, and studying its properties is a fundamental step toward understanding the Earth's interior. Here, we performed a first-principles investigation on the properties of iron as an isolated impurity in magnesium oxide, which is the condition of ferropericlase under which iron-iron interactions could be neglected. The calculations were carried using the all-electron full-potential linearized augmented plane wave method within the density functional theory in the generalized gradient approximation plus the on-site Hubbard correction. We present the electronic and magnetic properties, electric and magnetic hyperfine splitting of this impurity in high and low spin states for several charge states at zero pressure, which were then extended to high pressures. For the impurity in the neutral charge state, our results indicated that there is a metastable intermediate spin state (S=1), in addition to the high (S=2) and low (S=0) spin states. Those results were discussed in the context of an intermediate spin state, experimentally identified in ferrosilicate perovskite.

cond-mat.mtrl-sci

Electronic properties and hyperfine fields of nickel-related complexes in diamond

We carried out a first principles investigation on the microscopic properties of nickel-related defect centers in diamond. Several configurations, involving substitutional and interstitial nickel impurities, have been considered either in isolated configurations or forming complexes with other defects, such as vacancies and boron and nitrogen dopants. The results, in terms of spin, symmetry, and hyperfine fields, were compared with the available experimental data on electrically active centers in synthetic diamond. Several microscopic models, previously proposed to explain those data, have been confirmed by this investigation, while some models could be discarded. We also provided new insights on the microscopic structure of several of those centers.

cond-mat.mtrl-sci

Crystal engineering using functionalized adamantane

We performed a first principles investigation on the structural, electronic, and optical properties of crystals made of chemically functionalized adamantane molecules. Several molecular building blocks, formed by boron and nitrogen substitutional functionalizations, were considered to build zincblende and wurtzite crystals, and the resulting structures presented large bulk moduli and cohesive energies, wide and direct bandgaps, and low dielectric constants (low-$κ$ materials). Those properties provide stability for such structures up to room temperature, superior to those of typical molecular crystals. This indicates a possible road map for crystal engineering using functionalized diamondoids, with potential applications ranging from space filling between conducting wires in nanodevices to nano-electro-mechanical systems.

cond-mat.mtrl-sci