arXiv subjects

L. Vila

Publications and source records attributed to L. Vila.

At least 19 recordsLinked to original sources

arXiv2023

Spin-orbit readout using thin films of topological insulator Sb2Te3 deposited by industrial magnetron sputtering

Driving a spin-logic circuit requires the production of a large output signal by spin-charge interconversion in spin-orbit readout devices. This should be possible by using topological insulators, which are known for their high spin-charge interconversion efficiency. However, high-quality topological insulators have so far only been obtained on a small scale, or with large scale deposition techniques which are not compatible with conventional industrial deposition processes. The nanopatterning and electrical spin injection into these materials has also proven difficult due to their fragile structure and low spin conductance. We present the fabrication of a spin-orbit readout device from the topological insulator Sb2Te3 deposited by large-scale industrial magnetron sputtering on SiO2. Despite a modification of the Sb2Te3 layer structural properties during the device nanofabrication, we measured a sizeable output voltage that can be unambiguously ascribed to a spin-charge interconversion process.

cond-mat.mes-hall↗

arXiv2023

Electrical measurement of the Spin Hall Effect isotropy in a ferromagnet

The spin-dependent transport properties of paramagnetic metals are roughly invariant under rotation. By contrast, in ferromagnetic materials the magnetization breaks the rotational symmetry, and thus the spin Hall effect is expected to become anisotropic. Here, using a specific design of lateral spin valves, we measure electrically the spin Hall Effect anisotropy in NiCu and NiPd, both in their ferromagnetic and paramagnetic phases. We show that the appearance of the ferromagnetic order does not lead to a sizeable anisotropy of the spin charge interconversion in these materials.

cond-mat.mtrl-sci↗

arXiv2022

Spin to charge conversion at Rashba-split SrTiO$_3$ interfaces from resonant tunneling

Spin-charge interconversion is a very active direction in spintronics. Yet, the complex behaviour of some of the most promising systems such as SrTiO$_3$ (STO) interfaces is not fully understood. Here, on the basis of a 6-band $\boldsymbol{k.p}$ method combined with spin-resolved scattering theory, we give a theoretical demonstration of transverse spin-charge interconversion physics in STO Rashba interfaces. Calculations involve injection of spin current from a ferromagnetic contact by resonant tunneling into the native Rashba-split resonant levels of the STO triangular quantum well. We compute an asymmetric tunneling electronic transmission yielding a transverse charge current flowing in plane, with a dependence with gate voltage in a very good agreement with existing experimental data.

cond-mat.mes-hall↗

arXiv2021

Size-dependent enhancement of passive microwave rectification in magnetic tunnel junctions with perpendicular magnetic anisotropy

Spintronic rf detectors were demonstrated, recently, for energy harvesting and wireless communication at low input power. Here we report on the optimization of the rectified output dc voltage using magnetic tunnel junctions (MTJ) with strong perpendicular anisotropy (PMA) of both the polarizing and the free layer. The magnetization of the polarizing layer is fixed out of plane, while the free layer thickness is adjusted so that its magnetization orientation changes from in plane to out of plane. The rectification dc output voltage lies in the mV range for moderate rf powers, with a signal to noise ratio of 10 to 100 for Prf = -25dBm. It shows a strong dependence on the dimensions of the MTJ: it increases by a factor of 5 to 6 when reducing the diameter from 150nm to 20nm. This enhancement can be doubled when reducing the FL thickness from 1.8nm to 1.6nm. This dimensional enhancement is attributed to the change of the effective anisotropy of the excited free layer, and the MTJ resistance. The results are of interest for the design of spintronic based rf detectors with optimized sensitivity.

cond-mat.mes-hall↗

arXiv2020

Ultrafast spin-currents and charge conversion at 3d-5d interfaces probed by time-domain terahertz spectroscopy

Spintronic structures are extensively investigated for their spin orbit torque properties, required for magnetic commutation functionalities. Current progress in these materials is dependent on the interface engineering for the optimization of spin transmission. Here, we advance the analysis of ultrafast spin-charge conversion phenomena at ferromagnetic-transition metal interfaces due to their inverse spin-Hall effect properties. In particular the intrinsic inverse spin Hall effect of Pt-based systems and extrinsic inverse spin-Hall effect of Au:W and Au:Ta in NiFe/Au:(W,Ta) bilayers are investigated. The spin-charge conversion is probed by complementary techniques -- ultrafast THz time domain spectroscopy in the dynamic regime for THz pulse emission and ferromagnetic resonance spin-pumping measurements in the GHz regime in the steady state -- to determine the role played by the material properties, resistivities, spin transmission at metallic interfaces and spin-flip rates. These measurements show the correspondence between the THz time domain spectroscopy and ferromagnetic spin-pumping for the different set of samples in term of the spin mixing conductance. The latter quantity is a critical parameter, determining the strength of the THz emission from spintronic interfaces. This is further supported by ab-initio calculations, simulations and analysis of the spin-diffusion and spin relaxation of carriers within the multilayers in the time domain, permitting to determine the main trends and the role of spin transmission at interfaces. This work illustrates that time domain spectroscopy for spin-based THz emission is a powerful technique to probe spin-dynamics at active spintronic interfaces and to extract key material properties for spin-charge conversion.

physics.app-ph↗

arXiv2020

Sub-micrometer near-field focusing of spin waves in ultrathin YIG films

We experimentally demonstrate tight focusing of a spin wave beam excited in extended nanometer-thick films of Yttrium Iron Garnet by a simple microscopic antenna functioning as a single-slit near-field lens. We show that the focal distance and the minimum transverse width of the focal spot can be controlled in a broad range by varying the frequency/wavelength of spin waves and the antenna geometry. The experimental data are in good agreement with the results of numerical simulations. Our findings provide a simple solution for implementation of magnonic nano-devices requiring local concentration of the spin-wave energy.

cond-mat.mes-hall↗

arXiv2019

Self-induced inverse spin Hall effect in ferromagnets: demonstration through non-monotonous temperature-dependence in permalloy

We investigated the self-induced inverse spin Hall effect in ferromagnets. Temperature (T), thickness (t) and angular-dependent measurements of transverse voltage in spin pumping experiments were performed with permalloy films. Results revealed non-monotonous T-dependence of the self-induced transverse voltage. Qualitative agreement was found with first-principle calculations unravelling the skew scattering, side-jump, and intrinsic contributions to the T-dependent spin Hall conductivity. Experimental data were similar whatever the material in contact with permalloy (oxides or metals), and revealed an increase of produced current with t, demonstrating a bulk origin of the effect.

cond-mat.mes-hall↗

arXiv2019

Enhancing the injection locking range of spin torque oscillators through mutual coupling

We investigate how the ability of the vortex oscillation mode of a spin-torque nano-oscillator to lock to an external microwave signal is modified when it is coupled to another oscillator. We show experimentally that mutual electrical coupling can lead to locking range enhancements of a factor 1.64. Furthermore, we analyze the evolution of the locking range as a function of the coupling strength through experiments and numerical simulations. By uncovering the mechanisms at stake in the locking range enhancement, our results will be useful for designing spin-torque nano-oscillators arrays with high sensitivities to external microwave stimuli.

cond-mat.mes-hall↗

arXiv2019

Spin dependent transport characterization in metallic lateral spin valves using 1D and 3D modeling

We present the analysis of the spin signals obtained in NiFe based metallic lateral spin valves. We exploit the spin dependent diffusive equations in both the conventional 1D analytic modeling as well as in 3D Finite Element Method simulations. Both approaches are used for extracting the spin diffusion length $l_{sf}^{N}$ and the effective spin polarization $P_{eff}$ in Py/Al, Py/Cu and Py/Au based lateral nano-structures at both $300\,K$ and $77\,K$. Both the analytic modeling and 3D Finite Element Method simulations give consistent results. Combination of both models provides a powerful tool for reliable spin transport characterization in all metallic spin valves and gives an insight into the spin/charge current and spin accumulations 3D distributions in these devices. We provide the necessary ingredients to develop the 3D finite element modeling of diffusive spin transport.

cond-mat.mtrl-sci↗

arXiv2019

Mn4N ferrimagnetic thin films for sustainable spintronics

Spintronics, which is the basis of a low-power, beyond-CMOS technology for computational and memory devices, remains up to now entirely based on critical materials such as Co, heavy metals and rare-earths. Here, we show that Mn4N, a rare-earth free ferrimagnet made of abundant elements, is an exciting candidate for the development of sustainable spintronics devices. Mn4N thin films grown epitaxially on SrTiO3 substrates possess remarkable properties, such as a perpendicular magnetisation, a very high extraordinary Hall angle (2%) and smooth domain walls, at the millimeter scale. Moreover, domain walls can be moved at record speeds by spin polarised currents, in absence of spin-orbit torques. This can be explained by the large efficiency of the adiabatic spin transfer torque, due to the conjunction of a reduced magnetisation and a large spin polarisation. Finally, we show that the application of gate voltages through the SrTiO3 substrates allows modulating the Mn4N coercive field with a large efficiency.

cond-mat.mtrl-sci↗

arXiv2018

Cross-shaped nanostructures for the study of spin to charge interconversions using spin-orbit coupling in non-magnetic materials

Several spin-orbit effects allow performing spin to charge inter-conversion: the spin Hall effects, the Rashba effect, or the spin-momentum locking in topological insulators. Here we focus on how the detection of this inter-conversion can be made electrically, using three different cross-shaped nanostructures. We apply these measurement configurations to the case of the spin Hall effect in Pt, using CoFe electrodes to detect and inject spins. Both the direct and inverse spin Hall effect can be detected, with a spin Hall signal up to two order of magnitude higher than that of nonlocal measurements in metallic lateral spin valves, and with a much simpler fabrication protocol. We compare the respective signal amplitude of the three proposed geometries. Finally, comparison of the observed spin signals with finite element method calculations allows extracting the spin Hall angle and the spin diffusion length of Pt.

cond-mat.mtrl-sci↗

arXiv2018

Highly thermally stable sub-20nm magnetic random-access memory based on perpendicular shape anisotropy

A new approach to increase the downsize scalability of perpendicular STT-MRAM is presented. It consists in significantly increasing the thickness of the storage layer in out-of-plane magnetized tunnel junctions (pMTJ) as compared to conventional pMTJ in order to induce a perpendicular shape anisotropy (PSA) in this layer. This PSA is obtained by depositing a thick ferromagnetic (FM) layer on top of an MgO/FeCoB based magnetic tunnel junction (MTJ) so that the thickness of the storage layer becomes of the order or larger than the diameter of the MTJ pillar. In contrast to conventional spin transfer torque magnetic random access memory (STT-MRAM) wherein the demagnetizing energy opposes the interfacial perpendicular magnetic anisotropy (iPMA), in these novel memory cells, both PSA and iPMA contributions favor out-of-plane orientation of the storage layer magnetization. Using thicker storage layers in these PSA-STT-MRAM has several advantages. Thanks to the PSA, very high and easily tunable thermal stability factors can be achieved, even down to sub-10 nm diameters. Moreover, low damping material can be used for the thick FM material thus leading to a reduction of the write current. The paper describes this new PSA-STT-MRAM concept, practical realization of such memory arrays, magnetic characterization demonstrating thermal stability factor above 200 for MTJs as small as 8nm in diameter and possibility to maintain thermal stability factor above 60 down to 4nm diameter.

cond-mat.mtrl-sci↗

arXiv2017

Large enhancement of the spin Hall effect in Au by scattering with side-jump on Ta impurities

We present measurements of the Spin Hall Effect (SHE) in AuW and AuTa alloys for a large range of W or Ta concentrations by combining experiments on lateral spin valves and Ferromagnetic-Resonance/spin pumping technique. The main result is the identification of a large enhancement of the Spin Hall Angle (SHA) by the side-jump mechanism on Ta impurities, with a SHA as high as + 0.5 (i.e $50\%$) for about 10\% of Ta. In contrast the SHA in AuW does not exceed + 0.15 and can be explained by intrinsic SHE of the alloy without significant extrinsic contribution from skew or side-jump scattering by W impurities. The AuTa alloys, as they combine a very large SHA with a moderate resistivity (smaller than $85\,μΩ.cm$), are promising for spintronic devices exploiting the SHE.

cond-mat.mtrl-sci↗

arXiv2017

Highly efficient spin-to-charge current conversion at room temperature in strained HgTe surface states

We report the observation of spin-to-charge current conversion in strained mercury telluride at room temperature, using spin pumping experiments. The conversion rates are found to be very high, with inverse Edelstein lengths up to 2.0 +/- 0.5 nm. The influence of the HgTe layer thickness on the conversion efficiency has been studied, as well as the role of a HgCdTe barrier inserted in-between the HgTe and NiFe layers. These measurements, associated to the temperature dependence of the resistivity, allows to ascribe these high conversion rates to the spin momentum locking property of HgTe surface states.

cond-mat.mes-hall↗

arXiv2016

Steady State and Dynamics of Joule Heating in Magnetic Tunnel Junctions Observed via the Temperature Dependence of RKKY Coupling

Understanding quantitatively the heating dynamics in magnetic tunnel junctions (MTJ) submitted to current pulses is very important in the context of spin-transfer-torque magnetic random access memory development. Here we provide a method to probe the heating of MTJ using the RKKY coupling of a synthetic ferrimagnetic storage layer as a thermal sensor. The temperature increase versus applied bias voltage is measured thanks to the decrease of the spin-flop field with temperature. This method allows distinguishing spin transfer torque (STT) effects from the influence of temperature on the switching field. The heating dynamics is then studied in real-time by probing the conductance variation due to spin-flop rotation during heating. This approach provides a new method for measuring fast heating in spintronic devices, particularly magnetic random access memory (MRAM) using thermally assisted or spin transfer torque writing.

cond-mat.mtrl-sci↗

arXiv2016

Highly efficient and tuneable spin-to-charge conversion through Rashba coupling at oxide interfaces

The spin-orbit interaction couples the electrons' motion to their spin. Accordingly, passing a current in a material with strong spin-orbit coupling generates a transverse spin current (spin Hall effect, SHE) and vice-versa (inverse spin Hall effect, ISHE). The emergence of SHE and ISHE as charge-to-spin interconversion mechanisms offers a variety of novel spintronics functionalities and devices, some of which do not require any ferromagnetic material. However, the interconversion efficiency of SHE and ISHE (spin Hall angle) is a bulk property that rarely exceeds ten percent, and does not take advantage of interfacial and low-dimensional effects otherwise ubiquitous in spintronics hetero- and mesostructures. Here, we make use of an interface-driven spin-orbit coupling mechanism - the Rashba effect - in the oxide two-dimensional electron system (2DES) LaAlO3/SrTiO3 to achieve spin-to-charge conversion with unprecedented efficiency. Through spin-pumping, we inject a spin current from a NiFe film into the oxide 2DES and detect the resulting charge current, which can be strongly modulated by a gate voltage. We discuss the amplitude of the effect and its gate dependence on the basis of the electronic structure of the 2DES.

cond-mat.mtrl-sci↗

arXiv2015

Comparison of the use of NiFe and CoFe as electrodes for metallic lateral spin-valves

Spin injection and detection in Co60Fe40-based all-metallic lateral spin-valves have been studied at both room and low temperatures. The obtained spin signals amplitudes have been compared to that of identical Ni80Fe20-based devices. The replacement of Ni80Fe20 by CoFe allows increasing the spin signal amplitude by up to one order of magnitude, thus reaching 50 mΩ at room temperature. The spin signal dependence with the distance between the ferromagnetic electrodes has been analyzed using both a 1D spin transport model and finite elements method simulations. The enhancement of the spin signal amplitude when using CoFe electrodes can be explained by a higher effective polarization.

cond-mat.mtrl-sci↗

arXiv2015

Evaluation of the spin diffusion length of AuW alloy by spin absorption experiments in the limit of large spin-orbit interactions

The knowledge of the spin diffusion length $λ_{A}$ is a prerequisite for the estimation of the spin Hall angle. We investigate spin current absorption of materials with small $λ_{A}$ using AuW stripes inserted in lateral spin-valves. Width variations of the AuW stripe lead to drastic changes of the spin absorption, which cannot be explained by conventional analysis. We show that the spin-current polarization and the spin accumulation attenuation in the vicinity of the spin absorber must to be precisely taken into account for accurate estimation of $λ_{A}$. We propose an analytical model supported by numerical calculations that allows to extract proper $λ_{A}$ values of spin Hall effect materials.

cond-mat.mes-hall↗