Searcharxiv⌕ Search

arXiv subjects

L. Wu

Publications and source records attributed to L. Wu.

36 records · Page 2Linked to original sources
arXiv2017

Sensitive spin detection using an on-chip SQUID-waveguide resonator

Precise detection of spin resonance is of paramount importance to achieve coherent spin control in quantum computing. We present a novel setup for spin resonance measurements, which uses a dc-SQUID flux detector coupled to an antenna from a coplanar waveguide. The SQUID and the waveguide are fabricated from 20~nm Nb thin film, allowing high magnetic field operation with the field applied parallel to the chip. We observe a resonance signal between the first and third excited states of Gd spins $S=7/2$ in a CaWO$_4$ crystal, relevant for state control in multi-level systems.

cond-mat.mes-hall↗
arXiv2017

The Microsoft 2017 Conversational Speech Recognition System

We describe the 2017 version of Microsoft's conversational speech recognition system, in which we update our 2016 system with recent developments in neural-network-based acoustic and language modeling to further advance the state of the art on the Switchboard speech recognition task. The system adds a CNN-BLSTM acoustic model to the set of model architectures we combined previously, and includes character-based and dialog session aware LSTM language models in rescoring. For system combination we adopt a two-stage approach, whereby subsets of acoustic models are first combined at the senone/frame level, followed by a word-level voting via confusion networks. We also added a confusion network rescoring step after system combination. The resulting system yields a 5.1\% word error rate on the 2000 Switchboard evaluation set.

cs.CL↗
arXiv2014

Neutron, electron and X-ray scattering investigation of Cr1-xVx near Quantum Criticality

The weakness of electron-electron correlations in the itinerant antiferromagnet Cr doped with V has long been considered the reason that neither new collective electronic states or even non Fermi liquid behaviour are observed when antiferromagnetism in Cr$_{1-x}$V$_{x}$ is suppressed to zero temperature. We present the results of neutron and electron diffraction measurements of several lightly doped single crystals of Cr$_{1-x}$V$_{x}$ in which the archtypal spin density wave instability is progressively suppressed as the V content increases, freeing the nesting-prone Fermi surface for a new striped charge instability that occurs at x$_{c}$=0.037. This novel nesting driven instability relieves the entropy accumulation associated with the suppression of the spin density wave and avoids the formation of a quantum critical point by stabilising a new type of charge order at temperatures in excess of 400 K. Restructuring of the Fermi surface near quantum critical points is a feature found in materials as diverse as heavy fermions, high temperature copper oxide superconductors and now even elemental metals such as Cr.

cond-mat.str-el↗
arXiv2013

Direct solutions for normal depths in curved irrigation canals

The normal depth is an important hydraulic element for canal design, operation and management. Curved irrigation canals including parabola, U-shaped and catenary canals have excellent hydraulic performance and strong ability of anti-frost heave, while the normal depths in the governing equations of the current common methods have no explicit analytical solution. They are only indirect methods by using trial procedures, numerical methods, and graphical tools. This study presents new direct formulas for normal depth in curved irrigation canals by applying for Marquardt method. The maximum relative error of the proposed formulas is less than 1% within the practice range by comparative analysis, and they are simple and convenient for manual calculations. The results may provide the reliable theoretical basis and useful reference for the design and operation management of irrigation canals.

physics.flu-dyn↗
arXiv2012

Aging and reduced bulk conductance in thin films of the topological insulator Bi$_2$Se$_3$

We report on the effect of exposure to atmospheric conditions on the THz conductivity of thin films of the topological insulator Bi$_2$Se$_3$. We find: 1) two contributions of mobile charge carriers to the THz conductivity immediately after growth, and 2) the spectral weight of the smaller of these decays significantly over a period of several days as the film is exposed to ambient conditions, while the other remains relatively constant. We associate the former with a bulk response, and the latter with the surface. The surface response exhibits the expected robustness of the carriers from 2D topological surface states. We find no evidence for a third spectral feature derived from topologically trivial surface states.

cond-mat.str-el↗
arXiv2011

THz response and colossal Kerr rotation from the surface states of the topological insulator Bi$_2$Se$_3$

Ordered states of matter are typically categorized by their broken symmetries. With the ordering of spins in a ferromagnet or the freezing of a liquid into a solid, the loss of symmetry distinguishes the ordered state from the disordered one. In contrast, topological states are distinguished by specific \textit{topological} properties that are encoded in their quantum mechanical wavefunctions. Frequently, a consequence of these properties is that there are robust "topologically protected" states on the sample's boundaries. The edge states of the quantum Hall effect (QHE) are the classic example. In the last few years, it was realized that another class of such topological matter may exist in 3D band insulators with large spin-orbit interaction. These so-called topological insulators are predicted to host robust surface states, which exhibit a number of interesting properties including spin helicity, immunity to back-scattering, and weak \textit{anti}--localization. There are predictions of a number of unusual phenomena associated with these surface states, including a proximity-effect-induced exotic superconducting state with Majorana fermions bound to a vortex and an `axion' electromagnetic response, and proposals for applications, such as their use in terahertz devices. In this Letter we report the observation of an unprecedentedly large rotation of the polarization plane of linearly polarized light reflected from thin films of the topological insulator Bi$_2$Se$_3$ in magnetic fields. This Kerr rotation can be as large as 65$^\circ$ and is due almost entirely to the surface states. Our results are evidence for the intrinsic response of the topologically protected surface states and provide a benchmark for the large magneto-electric effect predicted for these materials.

cond-mat.str-el↗
arXiv2010

Atomic Imaging Using Secondary Electrons in a Scanning Transmission Electron Microscope : Experimental Observations and Possible Mechanisms

We report our detailed investigation of high-resolution imaging using secondary electrons (SE) with a subnanometer probe in an aberration-corrected transmission electron microscope, Hitachi HD2700C. This instrument also allows us to acquire the corresponding annular-dark-field (ADF) images simultaneously and separately. We demonstrate that atomic SE imaging is achievable for a wide range of elements, from uranium to carbon. Using the ADF images as a reference, we study the SE image intensity and contrast as a function of applied bias, atomic number, crystal tilt and thickness to shed light on the origin of the unexpected ultrahigh resolution in SE imaging. We have also demonstrated that the SE signal is sensitive to the terminating species at a crystal surface. Possible mechanisms for atomicscale SE imaging are proposed. The ability to image both the surface and bulk of a sample at atomic scale is unprecedented, and could revolutionize the field of electron microscopy and imaging.

cond-mat.mtrl-sci↗
arXiv2004

Defect Structure of the High-Dielectric-Constant Perovskite Cacu3ti4o12

Using transmission electron microscopy (TEM) we studied CaCu3Ti4O12, an intriguing material that exhibits a huge dielectric response, up to kilohertz frequencies, over a wide range of temperature. Neither in single crystals, nor in polycrystalline samples, including sintered bulk- and thin-films, did we observe the twin domains suggested in the literature. Nevertheless, in the single crystals, we saw a very high density of dislocations with a Burger vector of [110], as well as regions with cation disorder and planar defects with a displacement vector 1/4[110]. In the polycrystalline samples, we observed many grain boundaries with oxygen deficiency, in comparison with the grain interior. The defect-related structural disorders and inhomogeneity, serving as an internal barrier layer capacitance (IBLC) in a semiconducting matrix, might explain the very large dielectric response of the material. Our TEM study of the structure defects in CaCu3Ti4O12 supports a recently proposed morphological model with percolating conducting regions and blocking regions.

cond-mat.mtrl-sci↗
arXiv2002

Domain wall fermions with improved gauge actions

We study the chiral properties of quenched domain wall fermions with several gauge actions. We demonstrate that the residual chiral symmetry breaking, which is present for a finite number of lattice sites in the fifth dimension ($L_s$), can be substantially suppressed using improved gauge actions. In particular the Symanzik action, the Iwasaki action, and a renormalization group improved gauge action, called doubly blocked Wilson (DBW2), are studied and compared to the Wilson action. All improved gauge actions studied show a reduction in the additive residual quark mass, $\mres$. Remarkably, in the DBW2 case $\mres$ is roughly two orders of magnitude smaller than the Wilson gauge action at $a^{-1}=2$ GeV and $L_s=16$. Significant reduction in $\mres$ is also realized at stronger gauge coupling corresponding to $a^{-1}=1.3$ GeV. As our numerical investigation indicates, this reduction is achieved by reducing the number of topological lattice dislocations present in the gauge field configurations. We also present detailed results for the quenched light hadron spectrum and the pion decay constant using the DBW2 gauge action.

hep-lat↗
arXiv2002

Kaon Matrix Elements and CP-violation from Quenched Lattice QCD: (I) the 3-flavor case

We report the results of a calculation of the K --> pi pi matrix elements relevant for the $\DIhalf$ rule and $\epe$ in quenched lattice QCD using domain wall fermions at a fixed lattice spacing $a^{-1} \sim 2$ GeV. Working in the three-quark effective theory, where only the u, d and s quarks enter and which is known perturbatively to next-to-leading order, we calculate the lattice K --> pi and K --> |0> matrix elements of dimension six, four-fermion operators. Through lowest order chiral perturbation theory these yield K --> pi pi matrix elements, which we then normalize to continuum values through a non-perturbative renormalization technique. For the ratio of isospin amplitudes |A_0|/|A_2| we find a value of $25.3 \pm 1.8$ (statistical error only) compared to the experimental value of 22.2, with individual isospin amplitudes 10-20% below the experimental values. For $\epe$, using known central values for standard model parameters, we calculate $(-4.0 \pm 2.3) \times 10^{-4}$ (statistical error only) compared to the current experimental average of $(17.2 \pm 1.8) \times 10^{-4}$. Because we find a large cancellation between the I = 0 and I = 2 contributions to $\epe$, the result may be very sensitive to the approximations employed. Among these are the use of: quenched QCD, lowest order chiral perturbation theory and continuum perturbation theory below 1.3 GeV. We have also calculated the kaon B parameter, B_K and find $B_{K,\bar{MS}}(2 {\rm GeV}) = 0.532(11)$. Although currently unable to give a reliable systematic error, we have control over statistical errors and more simulations will yield information about the effects of the approximations on this first-principles determination of these important quantities.

hep-lat↗
arXiv2002

Low temperature superlattice in monoclinic PZT

TEM has shown that the strongly piezoelectric material Pb(Zr0.52Ti0.48)O3 separates into two phases at low temperatures. The majority phase is the monoclinic phase previously found by x-ray diffraction. The minority phase, with a nanoscale coherence length, is a slightly distorted variant of the first resulting from the anti-phase rotation of the oxygen octahedra about [111]. This work clears up a recent controversy about the origin of superlattice peaks in these materials, and supports recent theoretical results predicting the coexistence of ferroelectric and rotational instabilities.

cond-mat.mtrl-sci↗
arXiv2001

Microstructure and Structural Defects in MgB2 Superconductor

We report a detailed study of the microstructure and defects in sintered polycrystalline MgB2. Both TEM and x-ray data reveal that MgO is the major second-phase in our bulk samples. Although MgB2 and MgO have different crystal symmetries, being P6/mmm and Fm-3m, respectively, their stacking sequence of Mg and B (or O) and lattice spacings in certain crystallographic orientations are very similar. The size of MgO varies from 10~500nm, and its mismatch with the MgB2 matrix can be a source for dislocations. Dislocations in MgB2 often have a Burgers vector of <100>. 1/3<1-10> and 1/3<210> partial dislocations and their associated stacking faults were also observed. Since both dislocations and stacking faults are located in the (001) basal plane, flux pinning anisotropy is expected. Diffuse scattering analysis suggests that the correlation length along the c-axis for defect-free basal planes is about 50nm. (001) twist grain-boundaries, formed by rotations along the c-axis, are major grain boundaries in MgB2 as a result of the out-of-plane weak bonding between Mg and B atoms. An excess of Mg was observed in some grain boundaries. High-resolution nano-probe EELS reveals that there is a difference in near edge structure of the boron K-edge acquired from grain boundaries and grain interiors. The change at the edge threshold may be suggestive of variation of the hole concentration that would significantly alter boundary superconductivity.

cond-mat.supr-con↗
arXiv2001

Chirality Correlation within Dirac Eigenvectors from Domain Wall Fermions

In the dilute instanton gas model of the QCD vacuum, one expects a strong spatial correlation between chirality and the maxima of the Dirac eigenvectors with small eigenvalues. Following Horvath, {\it et al.} we examine this question using lattice gauge theory within the quenched approximation. We extend the work of those authors by using weaker coupling, $β=6.0$, larger lattices, $16^4$, and an improved fermion formulation, domain wall fermions. In contrast with this earlier work, we find a striking correlation between the magnitude of the chirality density, $|ψ^\dagger(x)γ^5ψ(x)|$, and the normal density, $ψ^\dagger(x)ψ(x)$, for the low-lying Dirac eigenvectors.

hep-lat↗
arXiv2001

Non-perturbative Renormalisation of Domain Wall Fermions: Quark Bilinears

We find the renormalisation coefficients of the quark field and the flavour non-singlet fermion bilinear operators for the domain wall fermion action, in the regularisation independent (RI) renormalisation scheme. Our results are from a quenched simulation, on a 16^3x32 lattice, with beta=6.0 and an extent in the fifth dimension of 16. We also discuss the expected effects of the residual chiral symmetry breaking inherent in a domain wall fermion simulation with a finite fifth dimension, and study the evidence for both explicit and spontaneous chiral symmetry breaking effects in our numerical results. We find that the relations between different renormalisation factors predicted by chiral symmetry are, to a good approximation, satisfied by our results and that systematic effects due to the (low energy) spontaneous chiral symmetry breaking and zero-modes can be controlled. Our results are compared against the perturbative predictions for both their absolute value and renormalisation scale dependence.

hep-lat↗
arXiv2000

Quenched Lattice QCD with Domain Wall Fermions and the Chiral Limit

Quenched QCD simulations on three volumes, $8^3 \times$, $12^3 \times$ and $16^3 \times 32$ and three couplings, $β=5.7$, 5.85 and 6.0 using domain wall fermions provide a consistent picture of quenched QCD. We demonstrate that the small induced effects of chiral symmetry breaking inherent in this formulation can be described by a residual mass ($\mres$) whose size decreases as the separation between the domain walls ($L_s$) is increased. However, at stronger couplings much larger values of $L_s$ are required to achieve a given physical value of $\mres$. For $β=6.0$ and $L_s=16$, we find $\mres/m_s=0.033(3)$, while for $β=5.7$, and $L_s=48$, $\mres/m_s=0.074(5)$, where $m_s$ is the strange quark mass. These values are significantly smaller than those obtained from a more naive determination in our earlier studies. Important effects of topological near zero modes which should afflict an accurate quenched calculation are easily visible in both the chiral condensate and the pion propagator. These effects can be controlled by working at an appropriately large volume. A non-linear behavior of $m_π^2$ in the limit of small quark mass suggests the presence of additional infrared subtlety in the quenched approximation. Good scaling is seen both in masses and in $f_π$ over our entire range, with inverse lattice spacing varying between 1 and 2 GeV.

hep-lat↗
arXiv2000

The finite temperature QCD phase transition with domain wall fermions

The domain wall formulation of lattice fermions is expected to support accurate chiral symmetry, even at finite lattice spacing. Here we attempt to use this new fermion formulation to simulate two-flavor, finite temperature QCD near the chiral phase transition. In this initial study, a variety of quark masses, domain wall heights and domain wall separations are explored using an 8^3 x 4 lattice. Both the expectation value of the Wilson line and the chiral condensate show the temperature dependence expected for the QCD phase transition. Further, the desired chiral properties are seen for the chiral condensate, suggesting that the domain wall fermion formulation may be an effective approach for the numerical study of QCD at finite temperature.

hep-lat↗