arXiv subjects

Lajos Hanzo

Publications and source records attributed to Lajos Hanzo.

At least 91 records · Page 5Linked to original sources

arXiv2025

Stacked Intelligent Metasurface-Based Transceiver Design for Near-Field Wideband Systems

Intelligent metasurfaces may be harnessed for realizing efficient holographic multiple-input and multiple-output (MIMO) systems, at a low hardware-cost and high energy-efficiency. As part of this family, we propose a hybrid beamforming design for stacked intelligent metasurfaces (SIM) aided wideband wireless systems relying on the near-field channel model. Specifically, the holographic beamformer is designed based on configuring the phase shifts in each layer of the SIM for maximizing the sum of the baseband eigen-channel gains of all users. To optimize the SIM phase shifts, we propose a layer-by-layer iterative algorithm for optimizing the phase shifts in each layer alternately. Then, the minimum mean square error (MMSE) transmit precoding method is employed for the digital beamformer to support multi-user access. Furthermore, the mitigation of the SIM phase tuning error is also taken into account in the digital beamformer by exploiting its statistics. The power sharing ratio of each user is designed based on the iterative waterfilling power allocation algorithm. Additionally, our analytical results indicate that the spectral efficiency attained saturates in the high signal-to-noise ratio (SNR) region due to the phase tuning error resulting from the imperfect SIM hardware quality. The simulation results show that the SIM-aided holographic MIMO outperforms the state-of-the-art (SoA) single-layer holographic MIMO in terms of its achievable rate. We further demonstrate that the near-field channel model allows the SIM-based transceiver design to support multiple users, since the spatial resources represented both by the angle domain and the distance domain can be exploited.

cs.IT↗

arXiv2025

DRL-based Dolph-Tschebyscheff Beamforming in Downlink Transmission for Mobile Users

With the emergence of AI technologies in next-generation communication systems, machine learning plays a pivotal role due to its ability to address high-dimensional, non-stationary optimization problems within dynamic environments while maintaining computational efficiency. One such application is directional beamforming, achieved through learning-based blind beamforming techniques that utilize already existing radio frequency (RF) fingerprints of the user equipment obtained from the base stations and eliminate the need for additional hardware or channel and angle estimations. However, as the number of users and antenna dimensions increase, thereby expanding the problem's complexity, the learning process becomes increasingly challenging, and the performance of the learning-based method cannot match that of the optimal solution. In such a scenario, we propose a deep reinforcement learning-based blind beamforming technique using a learnable Dolph-Tschebyscheff antenna array that can change its beam pattern to accommodate mobile users. Our simulation results show that the proposed method can support data rates very close to the best possible values.

eess.SP↗

arXiv2025

Low-Complexity Channel Estimation for RIS-Assisted Multi-User Wireless Communications

Reconfigurable intelligent surfaces (RISs) are eminently suitable for improving the reliability of wireless communications by jointly designing the active beamforming at the base station (BS) and the passive beamforming at the RIS. Therefore, the accuracy of channel estimation is crucial for RIS-aided systems. The challenge is that only the cascaded two-hop channel spanning from the user equipments (UEs) to the RIS and spanning from the RIS to the BS can be estimated, due to the lack of active radio frequency (RF) chains at RIS elements, which leads to high pilot overhead. In this paper, we propose a low-overhead linear minimum mean square error (LMMSE) channel estimation method by exploiting the spatial correlation of channel links, which strikes a trade-off between the pilot overhead and the channel estimation accuracy. Moreover, we calculate the theoretical normalized mean square error (MSE) for our channel estimation method. Finally, we verify numerically that the proposed LMMSE estimator has lower MSE than the state-of-the-art (SoA) grouping based estimators.

cs.IT↗

arXiv2025

CDMA/OTFS Sensing Outperforms Pure OTFS at the Same Communication Throughput

There is a dearth of publications on the subject of spreading-aided Orthogonal Time Frequency Space (OTFS) solutions, especially for Integrated Sensing and Communication (ISAC), even though Code Division Multiple Access (CDMA) assisted multi-user OTFS (CDMA/OTFS) exhibits tangible benefits. Hence, this work characterises both the communication Bit Error Rate (BER) and sensing Root Mean Square Error (RMSE) performance of CDMA/OTFS, and contrasts them to pure OTFS. Three CDMA/OTFS configurations are considered: Delay Code Division Multiple Access OTFS (Dl-CDMA/OTFS), Doppler Code Division Multiple Access OTFS (Dp-CDMA/OTFS), and Delay Doppler Code Division Multiple Access OTFS (DD-CDMA/OTFS), which harness direct sequence spreading along the delay axis, Doppler axis, and DD domains respectively. For each configuration, the performance of Gold, Hadamard, and Zadoff-Chu sequences is investigated. The results demonstrate that Zadoff-Chu Dl-CDMA/OTFS and DD-CDMA/OTFS consistently outperform pure OTFS sensing, whilst maintaining a similar communication performance at the same throughput. The extra modulation complexity of CDMA/OTFS is similar to that of other OTFS multi-user methodologies, but the demodulation complexity of CDMA/OTFS is lower than that of some other OTFS multi-user methodologies. CDMA/OTFS sensing can also consistently outperform OTFS sensing whilst not requiring any additional complexity for target parameter estimation. Therefore, CDMA/OTFS is an appealing candidate for implementing multi-user OTFS ISAC.

eess.SP↗

arXiv2025

Rydberg Atomic Quantum Receivers for Classical Wireless Communication and Sensing

The Rydberg atomic quantum receivers (RAQR) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on light-atom interactions relying on the so called electromagnetically induced transparency (EIT) and Aulter-Townes splitting (ATS), so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states and various modulation schemes facilitate an ultra-high sensitivity ($\sim$ nV/cm/$\sqrt{\text{Hz}}$) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple-output (RAQ-MIMO) schemes for facilitating the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.

eess.SP↗

arXiv2025

Holographic Metasurface-Based Beamforming for Multi-Altitude LEO Satellite Networks

Low Earth Orbit (LEO) satellite networks are capable of improving the global Internet service coverage. In this context, we propose a hybrid beamforming design for holographic metasurface based terrestrial users in multi-altitude LEO satellite networks. Firstly, the holographic beamformer is optimized by maximizing the downlink channel gain from the serving satellite to the terrestrial user. Then, the digital beamformer is designed by conceiving a minimum mean square error (MMSE) based detection algorithm for mitigating the interference arriving from other satellites. To dispense with excessive overhead of full channel state information (CSI) acquisition of all satellites, we propose a low-complexity MMSE beamforming algorithm that only relies on the distribution of the LEO satellite constellation harnessing stochastic geometry, which can achieve comparable throughput to that of the algorithm based on the full CSI in the case of a dense LEO satellite deployment. Furthermore, it outperforms the maximum ratio combining (MRC) algorithm, thanks to its inter-satellite interference mitigation capacity. The simulation results show that our proposed holographic metasurface based hybrid beamforming architecture is capable of outperforming the state-of-the-art antenna array architecture in terms of its throughput, given the same physical size of the transceivers. Moreover, we demonstrate that the beamforming performance attained can be substantially improved by taking into account the mutual coupling effect, imposed by the dense placement of the holographic metasurface elements.

cs.IT↗

arXiv2025

Performance Analysis and Optimization of STAR-RIS-Aided Cell-Free Massive MIMO Systems Relying on Imperfect Hardware

Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-aided cell-free massive multiple-input multiple-output (CF-mMIMO) systems are investigated under spatially correlated fading channels using realistic imperfect hardware. Specifically, the transceiver distortions, \textcolor{black}{time-varying phase noise, and RIS phase shift errors} are considered. Upon considering imperfect hardware and pilot contamination, we derive a linear minimum mean-square error (MMSE) criterion-based cascaded channel estimator. Moreover, a closed-form expression of the downlink ergodic spectral efficiency (SE) is derived based on maximum ratio (MR) based transmit precoding and channel statistics, where both a finite number of access points (APs) and STAR-RIS elements as well as imperfect hardware are considered. Furthermore, by exploiting the ergodic signal-to-interference-plus-noise ratios (SINRs) among user equipment (UE), a max-min fairness problem is formulated for the joint optimization of the passive transmitting and reflecting beamforming (BF) at the STAR-RIS as well as of the power control coefficients. An alternating optimization (AO) algorithm is proposed for solving the resultant problems, where iterative adaptive particle swarm optimization (APSO) and bisection methods are proposed for circumventing the non-convexity of the RIS passive BF and the quasi-concave power control sub-problems, respectively. Our simulation results illustrate that the STAR-RIS-aided CF-mMIMO system attains higher SE than its RIS-aided counterpart. The performance of different hardware parameters is also evaluated. Additionally, it is demonstrated that the SE of the worst UE can be significantly improved by exploiting the proposed AO-based algorithm compared to conventional solutions associated with random passive BF and equal-power scenarios.

cs.IT↗

arXiv2024

The Rendezvous Between Extreme Value Theory and Next-generation Networks

Promising technologies such as massive multiple-input and multiple-output, reconfigurable intelligent reflecting surfaces, non-terrestrial networks, millimetre wave communication, ultra-reliable lowlatency communication are envisioned as the enablers for next-generation (NG) networks. In contrast to conventional communication systems meeting specific average performance requirements, NG systems are expected to meet quality-of-service requirements in extreme scenarios as well. In this regard, extreme value theory (EVT) provides a powerful framework for the design of communication systems. In this paper, we provide a comprehensive survey of advances in communication that utilize EVT to characterize the extreme order statistics of interest. We first give an overview of the history of EVT and then elaborate on the fundamental theorems. Subsequently, we discuss different problems of interest in NG communication systems and how EVT can be utilized for their analysis. We finally point out the open challenges and future directions of EVT in NG communication systems.

cs.IT↗

arXiv2024

The Evolution of Quantum Secure Direct Communication: On the Road to the Qinternet

Communication security has to evolve to a higher plane in the face of the threat from the massive computing power of the emerging quantum computers. Quantum secure direct communication (QSDC) constitutes a promising branch of quantum communication, which is provably secure and overcomes the threat of quantum computing, whilst conveying secret messages directly via the quantum channel. In this survey, we highlight the motivation and the status of QSDC research with special emphasis on its theoretical basis and experimental verification. We will detail the associated point-to-point communication protocols and show how information is protected and transmitted. Finally, we discuss the open challenges as well as the future trends of QSDC networks, emphasizing again that QSDC is not a pure quantum key distribution (QKD) protocol, but a fully-fledged secure communication scheme.

quant-ph↗

arXiv2024

Space-Air-Ground Integrated Networks: Their Channel Model and Performance Analysis

Given their extensive geographic coverage, low Earth orbit (LEO) satellites are envisioned to find their way into next-generation (6G) wireless communications. This paper explores space-air-ground integrated networks (SAGINs) leveraging LEOs to support terrestrial and non-terrestrial users. We first propose a practical satellite-ground channel model that incorporates five key aspects: 1) the small-scale fading characterized by the Shadowed-Rician distribution in terms of the Rician factor K, 2) the path loss effect of bending rays due to atmospheric refraction, 3) the molecular absorption modelled by the Beer-Lambert law, 4) the Doppler effects including the Earth's rotation, and 5) the impact of weather conditions according to the International Telecommunication Union Recommendations (ITU-R). Harnessing the proposed model, we analyze the long-term performance of the SAGIN considered. Explicitly, the closed-form expressions of both the outage probability and of the ergodic rates are derived. Additionally, the upper bounds of bit-error rates and of the Goodput are investigated. The numerical results yield the following insights: 1) The shadowing effect and the ratio between the line-of-sight and scattering components can be conveniently modeled by the factors of K and m in the proposed Shadowed-Rician small-scale fading model. 2) The atmospheric refraction has a modest effect on the path loss. 3) When calculating the transmission distance of waves, Earth's curvature and its geometric relationship with the satellites must be considered, particularly at small elevation angles. 3) High-frequency carriers suffer from substantial path loss, and 4) the Goodput metric is eminently suitable for characterizing the performance of different coding as well as modulation methods and of the estimation error of the Doppler effects.

cs.IT↗

arXiv2024

Optical RISs Improve the Secret Key Rate of Free-Space QKD in HAP-to-UAV Scenarios

Large optical reconfigurable intelligent surfaces (ORISs) are proposed for employment on building rooftops to facilitate free-space quantum key distribution (QKD) between highaltitude platforms (HAPs) and low-altitude platforms (LAPs). Due to practical constraints, the communication terminals can only be positioned beneath the LAPs, preventing direct upward links to HAPs. By deploying ORISs on rooftops to reflect the beam arriving from HAPs towards LAPs from below, reliable HAP-to-LAP links can be established. To accurately characterize the optical beam propagation, we develop an analytical channel model based on extended Huygens-Fresnel principles for representing both the atmospheric turbulence effects and the hovering fluctuations of LAPs. This model facilitates adaptive ORIS beam-width control through linear, quadratic, and focusing phase shifts, which are capable of effectively mitigating the detrimental effects of beam broadening and pointing errors (PE). Consequently, the information-theoretic bound of the secret key rate and the security performance of a decoy-state QKD protocol are analyzed. Our findings demonstrate that quadratic phase shifts enhance the SKR at high HAP-ORIS zenith angles or mild PE conditions by narrowing the beam to optimal sizes. By contrast, linear phase shifts are advantageous at low HAP-ORIS zenith angles or moderate-to-high PE by diverging the beam to mitigate LAP fluctuations.

eess.SP↗

arXiv2024

Quantum Information Processing, Sensing and Communications: Their Myths, Realities and Futures

The recent advances in quantum information processing, sensing and communications are surveyed with the objective of identifying the associated knowledge gaps and formulating a roadmap for their future evolution. Since the operation of quantum systems is prone to the deleterious effects of decoherence, which manifests itself in terms of bit-flips, phase-flips or both, the pivotal subject of quantum error mitigation is reviewed both in the presence and absence of quantum coding. The state-of-the-art, knowledge gaps and future evolution of quantum machine learning are also discussed, followed by a discourse on quantum radar systems and briefly hypothesizing about the feasibility of integrated sensing and communications in the quantum domain. Finally, we conclude with a set of promising future research ideas in the field of ultimately secure quantum communications with the objective of harnessing ideas from the classical communications field.

quant-ph↗

arXiv2024

Fluid Antenna-Aided Rate-Splitting Multiple Access

This letter considers a fluid antenna system (FAS)-aided rate-splitting multiple access (RSMA) approach for downlink transmission. In particular, a base station (BS) equipped with a single traditional antenna system (TAS) uses RSMA signaling to send information to several mobile users (MUs) each equipped with FAS. To understand the achievable performance, we first present the distribution of the equivalent channel gain based on the joint multivariate t-distribution and then derive a compact analytical expression for the outage probability (OP). Moreover, we obtain the asymptotic OP in the high signal-to-noise ratio (SNR) regime. Numerical results show that combining FAS with RSMA significantly outperforms TAS and conventional multiple access schemes, such as non-orthogonal multiple access (NOMA), in terms of OP. The results also indicate that FAS can be the tool that greatly improves the practicality of RSMA.

cs.IT↗

arXiv2024

OTFS-MDMA: An Elastic Multi-Domain Resource Utilization Mechanism for High Mobility Scenarios

By harnessing the delay-Doppler (DD) resource domain, orthogonal time-frequency space (OTFS) substantially improves the communication performance under high-mobility scenarios by maintaining quasi-time-invariant channel characteristics. However, conventional multiple access (MA) techniques fail to efficiently support OTFS in the face of diverse communication requirements. Recently, multi-dimensional MA (MDMA) has emerged as a flexible channel access technique by elastically exploiting multi-domain resources for tailored service provision. Therefore, we conceive an elastic multi-domain resource utilization mechanism for a novel multi-user OTFS-MDMA system by leveraging user-specific channel characteristics across the DD, power, and spatial resource domains. Specifically, we divide all DD resource bins into separate subregions called DD resource slots (RSs), each of which supports a fraction of users, thus reducing the multi-user interference. Then, the most suitable MA, including orthogonal, non-orthogonal, or spatial division MA (OMA/ NOMA/ SDMA), will be selected with each RS based on the interference levels in the power and spatial domains, thus enhancing the spectrum efficiency. Then, we jointly optimize the user assignment, access scheme selection, and power allocation in all DD RSs to maximize the weighted sum-rate subject to their minimum rate and various practical constraints. Since this results in a non-convex problem, we develop a dynamic programming and monotonic optimization (DPMO) method to find the globally optimal solution in the special case of disregarding rate constraints. Subsequently, we apply a low-complexity algorithm to find sub-optimal solutions in general cases.

cs.IT↗

arXiv2024

Precoded faster-than-Nyquist signaling using optimal power allocation for OTFS

A precoded orthogonal time frequency space (OTFS) modulation scheme relying on faster-than-Nyquist (FTN) transmission over doubly selective fading channels is {proposed}, which enhances the spectral efficiency and improves the Doppler resilience. We derive the input-output relationship of the FTN signaling in the delay-Doppler domain. Eigenvalue decomposition (EVD) is used for eliminating both the effects of inter-symbol interference and correlated additive noise encountered in the delay-Doppler domain to enable efficient symbol-by-symbol demodulation. Furthermore, the power allocation coefficients of individual frames are optimized for maximizing the mutual information under the constraint of the derived total transmit power. Our performance results demonstrate that the proposed FTN-based OTFS scheme can enhance the information rate while achieving a comparable BER performance to that of its conventional Nyquist-based OTFS counterpart that employs the same root-raised-cosine shaping filter.

eess.SP↗

arXiv2024

Sum-Rate Maximization of RIS-Aided Digital and Holographic Beamformers in MU-MISO Systems

Reconfigurable holographic surfaces (RHS) are intrinsically amalgamated with reconfigurable intelligent surfaces (RIS), for beneficially ameliorating the signal propagation environment. This potent architecture significantly improves the system performance in non-line-of-sight scenarios at a low power consumption. Briefly, the RHS technology integrates ultra-thin, lightweight antennas onto the transceiver, for creating sharp, high-gain directional beams. We formulate a user sum-rate maximization problem for our RHS-RIS-based hybrid beamformer. Explicitly, we jointly design the digital, holographic, and passive beamformers for maximizing the sum-rate of all user equipment (UE). To tackle the resultant nonconvex optimization problem, we propose an alternating maximization (AM) framework for decoupling and iteratively solving the subproblems involved. Specifically, we employ the zero-forcing criterion for the digital beamformer, leverage fractional programming to determine the radiation amplitudes of the RHS and utilize the Riemannian conjugate gradient algorithm for optimizing the RIS phase shift matrix of the passive beamformer. Our simulation results demonstrate that the proposed RHS-RIS-based hybrid beamformer outperforms its conventional counterpart operating without an RIS in multi-UE scenarios. The sum-rate improvement attained ranges from 8 bps/Hz to 13 bps/Hz for various transmit powers at the base station (BS) and at the UEs, which is significant.

eess.SP↗

arXiv2024

Optimization of the Downlink Spectral- and Energy-Efficiency of RIS-aided Multi-user URLLC MIMO Systems

Modern wireless communication systems are expected to provide improved latency and reliability. To meet these expectations, a short packet length is needed, which makes the first-order Shannon rate an inaccurate performance metric for such communication systems. A more accurate approximation of the achievable rates of finite-block-length (FBL) coding regimes is known as the normal approximation (NA). It is therefore of substantial interest to study the optimization of the FBL rate in multi-user multiple-input multiple-output (MIMO) systems, in which each user may transmit and/or receive multiple data streams. Hence, we formulate a general optimization problem for improving the spectral and energy efficiency of multi-user MIMO-aided ultra-reliable low-latency communication (URLLC) systems, which are assisted by reconfigurable intelligent surfaces (RISs). We show that an RIS is capable of substantially improving the performance of multi-user MIMO-aided URLLC systems. Moreover, the benefits of RIS increase as the packet length and/or the tolerable bit error rate are reduced. This reveals that RISs can be even more beneficial in URLLC systems for improving the FBL rates than in conventional systems approaching Shannon rates.

cs.IT↗

arXiv2024

Cooperative ISAC Networks: Opportunities and Challenges

The integration of sensing and communication (ISAC) emerges as a cornerstone technology for the forth upcoming sixth generation era, seamlessly incorporating sensing functionality into wireless networks as a native capability. The main challenges in efficient ISAC are constituted by its limited sensing and communication coverage, as well as severe inter-cell interference. Network-level ISAC relying on multi-cell cooperation is capable of effectively expanding both the sensing and communication (S&C) coverage and of providing extra degrees of freedom (DoF) for realizing increased integration gains between S&C. In this work, we provide new considerations for ISAC networks, including new metrics, the optimization of the DoF, cooperation regimes, and highlight new S&C tradeoffs. Then, we discuss a suite of cooperative S&C architectures both at the task, as well as data, and signal levels. Furthermore, the interplay between S&C at the network level is investigated and promising research directions are outlined.

eess.SP↗