arXiv subjects

Lambertus Hesselink

Publications and source records attributed to Lambertus Hesselink.

5 recordsLinked to original sources

arXiv2023

Bead-Droplet Reactor for High-Fidelity Solid-Phase Enzymatic DNA Synthesis

Solid-phase synthesis techniques underpin the synthesis of DNA, oligopeptides, oligosaccharides, and combinatorial libraries for drug discovery. State-of-the-art solid-phase synthesizers can produce oligonucleotides up to 200-300 nucleotides while using excess reagents. Accumulated errors over multiple reaction cycles prevent the synthesis of longer oligonucleotides for the genome scale engineering of synthetic biological systems. The sources of these errors in synthesis columns remains poorly understood. Here we show that bead-bead stacking significantly contributes to reaction errors in columns by analyzing enzymatic coupling of fluorescently labelled nucleotides onto the initiated beads along with porosity, particle tracking and diffusion calculations. To circumvent stacking, we introduce dielectrophoretic bead-droplet reactor (DBDR); a novel approach to synthesize on individual microbeads within microdroplets. Dielectrophoretic force overcomes the droplet-medium interfacial tension to encapsulate and eject individual beads from microdroplets in a droplet microfluidic device. Faster reagent diffusion in droplets, and non-uniform electric field induced enhancement in reagent concentration at its surface can improve reaction fidelities in DBDR. Fluorescence comparisons suggest around 3-fold enhancement of reaction fidelity compared to columns. DBDR can potentially enable the high-purity synthesis of arbitrarily long strands of DNA to meet the emerging demands in healthcare, environment, agriculture, materials, and computing.

physics.app-ph↗

arXiv2017

Bulk viscosity model for near-equilibrium acoustic wave attenuation

Acoustic wave attenuation due to vibrational and rotational molecular relaxation, under simplifying assumptions of near-thermodynamic equilibrium and absence of molecular dissociations, can be accounted for by specifying a bulk viscosity coefficient $μ_B$. In this paper, we propose a simple frequency-dependent bulk viscosity model which, under such assumptions, accurately captures wave attenuation rates from infrasonic to ultrasonic frequencies in Navier--Stokes and lattice Boltzmann simulations. The proposed model can be extended to any gas mixture for which molecular relaxation timescales and attenuation measurements are available. The performance of the model is assessed for air by varying the base temperature, pressure, relative humidity $h_r$, and acoustic frequency. Since the vibrational relaxation timescales of oxygen and nitrogen are a function of humidity, for certain frequencies an intermediate value of $h_r$ can be found which maximizes $μ_B$. The contribution to bulk viscosity due to rotational relaxation is verified to be a function of temperature, confirming recent findings in the literature. While $μ_B$ decreases with higher frequencies, its effects on wave attenuation become more significant, as shown via a dimensionless analysis. The proposed bulk viscosity model is designed for frequency-domain linear acoustic formulations but is also extensible to time-domain simulations of narrow-band frequency content flows.

physics.flu-dyn↗

arXiv2017

High-fidelity simulation of an ultrasonic standing-wave thermoacoustic engine with bulk viscosity effects

We have carried out boundary-layer-resolved, unstructured fully-compressible Navier--Stokes simulations of an ultrasonic standing-wave thermoacoustic engine (TAE) model. The model is constructed as a quarter-wavelength engine, approximately 4 mm by 4 mm in size and operating at 25 kHz, and comprises a thermoacoustic stack and a coin-shaped cavity, a design inspired by Flitcroft and Symko (2013). Thermal and viscous boundary layers (order of 10 $\mathrmμ$m) are resolved. Vibrational and rotational molecular relaxation are modeled with an effective bulk viscosity coefficient modifying the viscous stress tensor. The effective bulk viscosity coefficient is estimated from the difference between theoretical and semi-empirical attenuation curves. Contributions to the effective bulk viscosity coefficient can be identified as from vibrational and rotational molecular relaxation. The inclusion of the coefficient captures acoustic absorption from infrasonic ($\sim$10 Hz) to ultrasonic ($\sim$100 kHz) frequencies. The value of bulk viscosity depends on pressure, temperature, and frequency, as well as the relative humidity of the working fluid. Simulations of the TAE are carried out to the limit cycle, with growth rates and limit-cycle amplitudes varying non-monotonically with the magnitude of bulk viscosity, reaching a maximum for a relative humidity level of 5%. A corresponding linear model with minor losses was developed; the linear model overpredicts transient growth rate but gives an accurate estimate of limit cycle behavior. An improved understanding of thermoacoustic energy conversion in the ultrasonic regime based on a high-fidelity computational framework will help to further improve the power density advantages of small-scale thermoacoustic engines.

physics.flu-dyn↗

arXiv2016

High-fidelity simulation of a standing-wave thermoacoustic-piezoelectric engine

We have carried out wall-resolved unstructured fully-compressible Navier--Stokes simulations of a complete standing-wave thermoacoustic piezoelectric (TAP) engine model inspired by the experimental work of Smoker et al. (2012). The model is axisymmetric and comprises a 51 cm long resonator divided into two sections: a small diameter section enclosing a thermoacoustic stack, and a larger diameter section capped by a piezoelectric diaphragm tuned to the thermoacoustically amplified mode (388 Hz). The diaphragm is modelled with multi-oscillator broadband time-domain impedance boundary conditions (TDIBCs), providing higher fidelity over single-oscillator approximations. Simulations are first carried out to the limit cycle without energy extraction. The observed growth rates are shown to be grid-convergent and are verified against a numerical dynamical model based on Rott's theory. The latter is based on a staggered grid approach and allows jump conditions in the derivatives of pressure and velocity in sections of abrupt area change and the inclusion of linearized minor losses. The stack geometry maximizing the growth rate is also found. At the limit cycle, thermoacoustic heat leakage and frequency shifts are observed, consistent with experiments. Upon activation of the piezoelectric diaphragm, steady acoustic energy extraction and a reduced pressure amplitude limit cycle are obtained. A heuristic closure of the limit cycle acoustic energy budget is presented, supported by the linear dynamical model and the nonlinear simulations. The developed high-fidelity simulation framework provides accurate predictions of thermal-to-acoustic and acoustic-to-mechanical energy conversion (via TDIBCs), enabling a new paradigm for the design and optimization of advanced thermoacoustic engines.

physics.flu-dyn↗

arXiv2014

Linear and Nonlinear Modeling of a Traveling-Wave Thermoacoustic Heat Engine

We have carried out three-dimensional Navier-Stokes simulations, from quiescent conditions to the limit cycle, of a traveling-wave thermoacoustic heat engine (TAE) composed of a long variable-area resonator shrouding a smaller annular tube, which encloses the hot (HHX) and ambient (AHX) heat-exchangers, and the regenerator (REG). Simulations are wall-resolved, with no-slip and adiabatic conditions enforced at all boundaries, while the heat transfer and drag due to the REG and HXs are modeled. HHX temperatures have been investigated in the range 440K - 500K with AHX temperature fixed at 300K. The initial exponential growth of acoustic energy is due to a network of traveling waves amplified by looping around the REG/HX unit in the direction of the imposed temperature gradient. A simple analytical model demonstrates that such thermoacoustic instability is a Lagrangian thermodynamic process resembling a Stirling cycle. A system-wide linear stability model based on Rott's theory is able to accurately predict the frequency and the growth rate, exhibiting properties consistent with a supercritical Hopf bifurcation. The limit cycle is governed by acoustic streaming -- a rectified flow resulting from high-amplitude acoustics. Its key features are explained with an axially symmetric incompressible model driven by the wave-induced stresses extracted from the compressible calculations. These features include Gedeon streaming and mean recirculations due to flow separation. The first drives the mean advection of hot fluid from the HHX to a secondary heat exchanger (AHX2), in the thermal buffer tube (TBT), necessary to achieve saturation of the acoustic energy growth. The direct evaluation of the energy fluxes reveals that the efficiency of the device deteriorates with the drive ratio and that the acoustic power in the TBT is balanced primarily by the mean advection and thermoacoustic heat transport.

physics.flu-dyn↗