arXiv subjects

Lars Hultman

Publications and source records attributed to Lars Hultman.

At least 19 recordsLinked to original sources

arXiv2025

Machine-Learning Potentials Predict Orientation- and Mode-Dependent Fracture in Refractory Diborides

Fracture toughness ($K_\mathrm{Ic}$) and fracture strength ($\sigma_\mathrm{f}$) are key criteria in the selection and design of reliable ceramics. However, their experimental characterization remains challenging -- especially for ceramic thin films, where size and interfacial effects hinder accurate and reproducible measurements. Here, machine-learning interatomic potentials (MLIPs) trained on \textit{ab initio} datasets of single crystal models deformed up to fracture are used to characterize transgranular cleavage in pre-cracked ceramic diboride TMB$_2$ (TM = Ti, Zr, Hf) lattices through stress intensity factor ($K$)-controlled loading. Mode-I simulations performed across distinct crack geometries show that fracture is primarily driven by straight crack extension along the original plane. The corresponding macroscale fracture-initiation properties ($K_\mathrm{Ic} \approx 1.7$-2.9 MPa$\cdot\sqrt{\text{m}}$, $\sigma_\mathrm{f} \approx 1.6$-2.4 GPa) are extrapolated using established scaling laws. Considering TiB$_2$ as a representative system, additional simulations explore loading conditions ranging from pure Mode-I (opening) to Mode-II (sliding). TiB$_2$ models containing prismatic cracks exhibit their lowest fracture resistance under mixed-mode conditions, where the crack deflects onto pyramidal planes--as confirmed by nanoindentation tests on TiB$_2$(0001) thin films. This study establishes $K$-controlled, MLIP-based simulations as predictive tools for orientation- and mode-dependent fracture in ceramics. The approach is readily extendable to finite temperatures for evaluating fracture behavior under conditions relevant to refractory applications.

cond-mat.mtrl-sci↗

arXiv2025

Machine-learning potentials for structurally and chemically complex MAB phases: strain hardening and ripplocation-mediated plasticity

Though offering unprecedented pathways to molecular dynamics (MD) simulations of technologically-relevant materials and conditions, machine-learning interatomic potentials (MLIPs) are typically trained for ``simple'' materials and properties with minor size effects. Our study of MAB phases (MABs) - alternating transition metal boride (MB) and group A element layers - exemplifies that MLIPs for complex materials can be fitted and used in a high-throughput fashion: for predicting structural and mechanical properties across a large chemical/phase/temperature space. Considering group 4-6 transition metal based MABs, with A=Al and the 222, 212, and 314 type phases, three MLIPs are trained and tested, including lattice and elastic constants calculations at temperatures $T\in\{0,300,1200\}$ K, extrapolation grade and energy (force, stress) error analysis for $\approx{3\cdot10^6}$ ab initio MD snapshots. Subsequently, nanoscale tensile tests serve to quantify upper limits of strength and toughness attainable in single-crystal MABs at 300~K as well as their temperature evolution. In-plane tensile deformation is characterised by relatively high strength, {110}$\langle001\rangle$ type slipping, and failure by shear banding. The response to [001] loading is softer, triggers work hardening, and failure by kinking and layer delamination. Furthermore, W$_2$AlB$_2$ able to retard fracture via ripplocations and twinning from 300 up to 1200~K.

cond-mat.mtrl-sci↗

arXiv2024

Physico-thermal and geochemical behavior and alteration of the Au indicator gangue hydrothermal quartz at the Kubi Gold Ore Deposits

Altered and gangue quartz in hydrothermal veins from the Kubi Gold deposit in Dunkwa on Offin in the central region of Ghana are investigated for possible Au-associated indicator minerals and to provide the understanding and increase the knowledge of the mineral hosting and alteration processes in quartz. X-ray diffraction, air annealing furnace, differential scanning calorimetry, energy dispersive X-ray spectroscopy, and transmission electron microscopy have been applied on different quartz types outcropping from surface and bedrocks at the Kubi Gold Mining to reveal the material properties at different temperatures. From the diffraction results of the fresh and annealed quartz samples, we find that the samples contain indicator and the impurity minerals iron disulfide, biotite, titanium oxide, and magnetite. These minerals, under oxidation process between 574-1400 {\deg}C temperatures experienced hematite alterations and a transformation from {\alpha}-quartz to \b{eta}-quartz and further to cristobalite as observed from the calorimetry scans for hydrothermally exposed materials. The energy dispersive spectroscopy revealed elemental components of Fe, S, Mg, K, Al, Ti, Na, Si, O, and Ca contained in the samples, and these are attributed to the impurity phase minerals observed in the diffraction. The findings also suggest that during the hydrothermal flow regime, impurity minerals and metals can be trapped by voids and faults. Under favorable temperature conditions, the trapped minerals can be altered to change color at different depositional stages by oxidation and reduction processes leading to hematite alteration which is a useful indicator mineral in mineral exploration.

physics.geo-ph↗

arXiv2024

Phase stability and mechanical property trends for MAB phases by high-throughput ab initio calculations

MAB phases (MABs) are atomically-thin laminates of ceramic/metallic-like layers, having made a breakthrough in the development of 2D materials. Though theoretically offering a vast chemical and phase space, relatively few MABs have yet been synthesised. To guide experiments, we perform a systematic high-throughput {\it{ab initio}} screening of MABs that combine group 4--7 transition metals (M); Al, Si, Ga, Ge, or In (A); and boron (B) focusing on their phase stability trends and mechanical properties. Considering the 1:1:1, 2:1:1, 2:1:2, 3:1:2, 3:1:3, and 3:1:4 M:A:B ratios and 10 phase prototypes, possible stabilisation of a single-phase compound for each elemental combination is assessed through formation energy spectra of the competing mechanically and dynamically stable MABs. Based on the volumetric proximity of energetically-close phases, we identify systems in which volume-changing deformations may facilitate transformation toughening. Subsequently, chemistry- and phase-structure-related trends in the elastic stiffness and ductility are predicted using elastic-constants-based descriptors. The analysis of directional Cauchy pressures and Young's moduli allows comparing mechanical response parallel and normal to M--B/A layers. Among the suggested most promising MABs are Nb$_3$AlB$_4$, Cr$_2$SiB$_2$, Mn$_2$SiB$_2$ or the already synthesised MoAlB.

cond-mat.mtrl-sci↗

arXiv2023

Electronic and optical properties of core-shell InAlN nanorods: a comparative study via LDA, LDA-1/2, mBJ and $G_0W_0$ methods

Currently, self-induced InAlN core-shell nanorods enjoy an advanced stage of accumulation of experimental data from their growth and characterization as well as a comprehensive understanding of their formation mechanism by the ab initio modeling based on Synthetic Growth Concept. However, their electronic and optical properties, on which most of their foreseen applications are expected to depend, have not been investigated comprehensively. $G_0W_0$ is currently regarded as a gold-standard methodology with quasi-particle corrections to calculate electronic properties of materials in general. It is also the starting point for higher-order methods that study excitonic effects, such as those based on the Bethe-Salpeter equation. One major drawback of $G_0W_0$, however, is its computational cost, much higher than density-functional theory (DFT). Therefore, in many applications, it is highly desirable to answer the question of how well approaches based on DFT, such as e. g. LDA, LDA-1/2, and mBJ, can approximately reproduce $G_0W_0$ results with respect to the electronic and optical properties. Thus, the purpose of the present paper is to investigate how the DFT-based methodologies LDA, LDA-1/2, and mBJ can be used as tools to approximate $G_0W_0$ in studies of the electronic and optical properties of scaled down models of core-shell InAlN nanorods. For these systems, we observed that band gaps, density of states, dielectric functions, refractive indexes, absorption and reflectance coefficients are reasonably well described by LDA-1/2 and mBJ when compared to $G_0W_0$, however, at a much more favorable computational cost.

cond-mat.mtrl-sci↗

arXiv2023

Machine-learning potentials for nanoscale simulations of deformation and fracture: example of TiB$_2$ ceramic

Machine-learning interatomic potentials (MLIPs) offer a powerful avenue for simulations beyond length and timescales of ab initio methods. Their development for investigation of mechanical properties and fracture, however, is far from trivial since extended defects -- governing plasticity and crack nucleation in most materials -- are too large to be included in the training set. Using TiB$_2$ as a model ceramic material, we propose a strategy for fitting MLIPs suitable to simulate mechanical response of monocrystals until fracture. Our MLIP accurately reproduces ab initio stresses and failure mechanisms during room-temperature uniaxial tensile deformation of TiB$_2$ at the atomic scale ($\approx{10}^3$ atoms). More realistic tensile tests (low strain rate, Poisson's contraction) at the nanoscale ($\approx{10}^4$--10$^6$ atoms) require MLIP up-fitting, i.e. learning from additional ab initio configurations. Consequently, we elucidate trends in theoretical strength, toughness, and crack initiation patterns under different loading directions. To identify useful environments for further up-fitting, i.e., making the MLIP applicable to a wider spectrum of simulations, we asses transferability to other deformation conditions and phases not explicitly trained on.

cond-mat.mtrl-sci↗

arXiv2022

Chemical-scissor-mediated structural editing of layered transition metal carbides

Intercalation of non-van der Waals (vdW) layered materials can produce new 2D and 3D materials with unique properties, but it is difficult to achieve. Here, we describe a structural editing protocol for 3D non-vdW layered ternary carbides and nitrides (MAX phases) and their 2D vdW derivatives (MXenes). Gap-opening and species-intercalating stages were mediated by chemical scissors and guest intercalants, creating a large family of layered materials with unconventional elements and structures in MAX phases, as well as MXenes with versatile termination species. Removal of surface terminations by metal scissors and stitching of carbide layers by metal atoms leads to a reverse transformation from MXenes to MAX phases, and metal-intercalated 2D carbides. This scissor-mediated structural editing may enable structural and chemical tailoring of other layered ceramics.

cond-mat.mtrl-sci↗

arXiv2021

Review of Transition-Metal Diboride Thin Films

We review the thin film growth, chemistry, and physical properties of Group 4-6 transition-metal diboride (TMB2) thin films with AlB2-type crystal structure (Strukturbericht designation C32). Industrial applications are growing rapidly as TMB2 begin competing with conventional refractory ceramics like carbides and nitrides, including pseudo-binaries such as Ti1-xAlxN. The TMB2 crystal structure comprises graphite-like honeycombed atomic sheets of B interleaved by hexagonal close-packed TM layers. From the C32 crystal structure stems unique properties including high melting point, hardness, and corrosion resistance, yet limited oxidation resistance, combined with high electrical conductivity. We correlate the underlying chemical bonding, orbital overlap, and electronic structure to the mechanical properties, resistivity, and high-temperature properties unique to this class of materials. The review highlights the importance of avoiding contamination elements (like oxygen) and boron segregation on both the target and substrate sides during sputter deposition, for better-defined properties, regardless of the boride system investigated. This is a consequence of the strong tendency for B to segregate to TMB2 grain boundaries for boron-rich compositions of the growth flux. It is judged that sputter deposition of TMB2 films is at a tipping point towards a multitude of applications for TMB2 not solely as bulk materials, but also as protective coatings and electrically conducting high-temperature stable thin films.

cond-mat.mtrl-sci↗

arXiv2021

Elucidating Pathfinding Elements from the Kubi Gold Mine in Ghana

X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) are applied to investigate the properties of fine-grained concentrate on artisanal small-scale gold mining samples from the Kubi Gold Project of the Asante Gold Corporation near Dunwka-on-Offin in the Central Region of Ghana. Both techniques show that the Au-containing residual sediments are dominated by the host elements Fe, Ag, Al, N, O, Si, Hg, and Ti that either form alloys with gold or inherent elements in the sediments. For comparison, a bulk nugget sample mainly consisting of Au forms an electrum i.e., a solid solution with Ag. Untreated (impure) sediments, fine-grained Au concentrate, coarse-grained Au concentrate, and processed ore (Au bulk/nugget) samples were found to contain cluster of O, C, N, and Ag with Au concentrations significantly lower than that of the related elements. This finding can be attributed to primary geochemical dispersion, which evolved from crystallization of magma and hydrothermal liquids as well as migration of metasomatic elements and rapid rate of chemical weathering of lateralization in secondary processes. The results indicate that Si and Ag are strongly concomitants with Au because of their eutectic characteristics N, C, and O follow alongside because of their affinity to Si. These non-noble elements thus act as pathfinders of Au ores in the exploration area. The paper further discusses relationships between gold and sediments of auriferous lodes as key to determine indicator minerals of gold in mining sites

cond-mat.mtrl-sci↗

arXiv2021

Near-Room-Temperature Ferromagnetic Behavior of Single-Atom-Thick 2D Iron in Nanolaminated Ternary MAX Phases

Two dimensional (2D) ferromagnetic materials have attracted much attention in the fields of condensed matter physics and materials science, but their synthesis is still a challenge given their limitations on structural stability and susceptibility to oxidization. MAX phases nanolaminated ternary carbides or nitrides possess a unique crystal structure in which single-atom-thick A sublayers are interleaved by two dimensional MX slabs, providing nanostructured templates for designing 2D ferromagnetic materials if the non-magnetic A sublayers can be substituted replaced by magnetic elements. Here, we report three new ternary magnetic MAX phases (Ta2FeC, Ti2FeN and Nb2FeC) with A sublayers of single-atom-thick 2D iron through an isomorphous replacement reaction of MAX precursors (Ta2AlC, Ti2AlN and Nb2AlC) with a Lewis acid salts (FeCl2). All these MAX phases exhibit ferromagnetic (FM) behavior. The Curie temperature (Tc) of Ta2FeC and Nb2FeC MAX phase are 281 K and 291 K, respectively, i.e. close to room temperature. The saturation magnetization of these ternary magnetic MAX phases is almost two orders of magnitude higher than that of V2(Sn,Fe)C MAX phase whose A-site is partial substituted by Fe. Theoretical calculations on magnetic orderings of spin moments of Fe atoms in these nanolaminated magnetic MAX phases reveal that the magnetism can be mainly ascribed to intralayer exchange interaction of the 2D Fe atomic layers. Owning to the richness in composition of MAX phases, there is a large compositional space for constructing functional single-atom-thick 2D layers in materials using these nanolaminated templates.

cond-mat.mtrl-sci↗

arXiv2020

Halogenated MXenes with Electrochemically Active Terminals for High Performance Zinc Ion Batteries

The class of two-dimensional metal carbides and nitrides known as MXenes offer a distinct manner of property tailoring for a wide range of applications. The ability to tune the surface chemistry for expanding the property space of MXenes is thus an important topic, although experimental exploration of new surface terminals remains a challenge. Here, we synthesized Ti3C2 MXene with unitary, binary and ternary halogen terminals, e.g. -Cl, -Br, -I, -BrI and -ClBrI, to investigate the effect of surface chemistry on the properties of MXenes. The electrochemical activity of Br and I element result in the extraordinary electrochemical performance of the MXenes as cathodes for aqueous zinc ion batteries. The -Br and -I containing MXenes, e.g. Ti3C2Br2 and Ti3C2I2, exhibit distinct discharge platforms with considerable capacities of 97.6 mAh g-1 and 135 mAh g-1. Ti3C2(BrI) and Ti3C2(ClBrI) exhibit dual discharge platforms with capacities of 117.2 mAh g-1 and 106.7 mAh g-1. In contrast, the previously discovered MXenes Ti3C2Cl2 and Ti3C2(OF) exhibit no discharge platforms, and only ~50% of capacities and energy densities of Ti3C2Br2. These results emphasize the effectiveness of the Lewis-acidic-melt etching route for tuning the surface chemistry of MXenes, and also show promise for expanding the MXene family towards various applications.

cond-mat.mtrl-sci↗

arXiv2020

Interface Bonding of Zr1-xAlxN Nanocomposites Investigated by X-ray Spectroscopies and First Principles Calculations

The electronic structure, chemical bonding and interface component in ZrN-AlN nanocomposites formed by phase separation during thin film deposition of metastable Zr1-xAlxN (x=0.0, 0.12, 0.26, 0.40) is investigated by resonant inelastic X-ray scattering/X-ray emission and X-ray absorption spectroscopy and compared to first-principles calculations including transitions between orbital angular momentum final states. The experimental spectra are compared with different interface-slab model systems using first-principle all electron full-potential calculations where the core states are treated fully relativistic. As shown in this work, the bulk sensitivity and element selectivity of X-ray spectroscopy enables to probe the symmetry and orbital directions at interfaces between cubic and hexagonal crystals. We show how the electronic structure develop from local octahedral bond symmetry of cubic ZrN that distorts for increasing Al content into more complex bonding. This results in three different kinds of bonding originating from semi-coherent interfaces with segregated ZrN and lamellar AlN nanocrystalline precipitates. An increasing chemical shift and charge transfer between the elements takes place with increasing Al content and affects the bond strength and increases resistivity.

cond-mat.mtrl-sci↗

arXiv2019

Mechanical properties of VMoNO as a function of oxygen concentration: toward development of hard and tough refractory oxynitrides

Improved toughness is a central goal in the development of wear-resistant refractory ceramic coatings. Extensive theoretical and experimental research has revealed that NaCl structure VMoN alloys exhibit surprisingly high ductility combined with high hardness and toughness. However, during operation, protective coatings inevitably oxidize, a problem which may compromise material properties and performance. Here, we explore the role of oxidation in altering VMoN properties. Density functional theory and theoretical intrinsic hardness models are used to investigate the mechanical behavior of cubic V0.5Mo0.5N1-xOx solid solutions as a function of the oxygen concentration x. Elastic-constant and intrinsic hardness calculations show that oxidation does not degrade the mechanical properties of V0.5Mo0.5N. Electronic structure analyses indicate that the presence of oxygen reduces the covalent bond character, which slightly lowers the alloy strength and intrinsic hardness. Nevertheless, the character of metallic d-d states, which are crucial for allowing plastic deformation and enhancing toughness, remains unaffected. Overall, our results suggest that VMoNO oxynitrides, with oxygen concentrations as high as 50%, possess high intrinsic hardness, while still being ductile.

cond-mat.mtrl-sci↗

arXiv2019

Influence of Si doping and O2-flow on arc deposited (Al,Cr)2O3 coatings

(Al,Cr)2O3 coatings with Al/(Al+Cr) = 0.5 or Al = 70 at.%, doped with 0, 5 or 10 at.% Si, were deposited on hard metal and Si(100) substrates to elucidate the influence of Si on the resulting coatings. The chemical analysis of the coatings showed between 3.3 and 7.4 at.% metal fraction Si incorporated into all studied coatings depending on cathode Si-composition. The incorporated Si content does not change significantly with different oxygen flow covering a wide range of deposition conditions from low to high O2 flow during growth. The addition of Si promotes the metastable B1-like cubic structure over the thermodynamically stable corundum structure. The hardness determined by nanoindentation of the as-deposited coatings is slightly reduced upon Si-incorporation as well as upon increased Al-content. Si is found enriched in droplets but can also be found at a lower content, evenly spread, without visible segregation on the ~5 nm scale, in the actual oxide coating. The positive effect of improved cathode erosion upon Si-incorporation has to be balanced against the promotion of the metastable B1-like structure, having lower room temperature hardness and inferior thermal stability compared to the corundum structure.

cond-mat.mtrl-sci↗

arXiv2019

A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte

Two-dimensional carbides and nitrides of transition metals, known as MXenes, are a fast-growing family of 2D materials that draw attention as energy storage materials. So far, MXenes are mainly prepared from Al-containing MAX phases (where A = Al) by Al dissolution in F-containing solution, but most other MAX phases have not been explored. Here, a redox-controlled A-site-etching of MAX phases in Lewis acidic melts is proposed and validated by the synthesis of various MXenes from unconventional MAX phase precursors with A elements Si, Zn, and Ga. A negative electrode of Ti3C2 MXene material obtained through this molten salt synthesis method delivers a Li+ storage capacity up to 738 C g-1 (205 mAh g-1) with high-rate performance and pseudocapacitive-like electrochemical signature in 1M LiPF6 carbonate-based electrolyte. MXene prepared from this molten salt synthesis route offer opportunities as high-rate negative electrode material for electrochemical energy storage applications.

physics.app-ph↗

arXiv2019

Reactive magnetron sputtering of tungsten target in krypton/trimethylboron atmosphere

W-B-C films were deposited on Si(100) substrates held at elevated temperature by reactive sputtering from a W target in Kr/trimethylboron (TMB) plasmas. Quantitative analysis by X-ray photoelectron spectroscopy (XPS) shows that the films are W-rich between ~ 73 and ~ 93 at.% W. The highest metal content is detected in the film deposited with 1 sccm TMB. The C and B concentrations increase with increasing TMB flow to a maximum of ~18 and ~7 at.%, respectively, while the O content remains nearly constant at 2-3 at.%. Chemical bonding structure analysis performed after samples sputter-cleaning reveals C-W and B-W bonding and no detectable W-O bonds. During film growth with 5 sccm TMB and 500 oC or with 10 sccm TMB and 300-600 oC thin film X-ray diffraction shows the formation of cubic 100-oriented WC1-x with a possible solid solution of B. Lower flows and lower growth temperatures favor growth of W and W2C, respectively. Depositions at 700 and 800 oC result in the formation of WSi2 due to a reaction with the substrate. At 900 oC, XPS analysis shows ~96 at.% Si in the film due to Si interdiffusion. Scanning electron microscopy images reveal a fine-grained microstructure for the deposited WC1-x films. Nanoindentation gives hardness values in the range from ~23 to ~31 GPa and reduced elastic moduli between ~220 and 280 GPa in the films deposited at temperatures lower than 600 oC. At higher growth temperatures the hardness decreases by a factor of 3 to 4 following the formation of WSi2 at 700-800 oC and Si-rich surface at 900 oC.

cond-mat.mtrl-sci↗

arXiv2019

Multielemental single-atom-thick A layers in nanolaminated V2(Sn, A)C (A=Fe, Co, Ni, Mn) for tailoring magnetic properties

Tailoring of individual single-atom-thick layers in nanolaminated materials offers atomic-level control over material properties. Nonetheless, multielement alloying in individual atomic layers in nanolaminates is largely unexplored. Here, we report a series of inherently nanolaminated V2(A'xSn1-x)C (A'=Fe, Co, Ni and Mn, and combinations thereof, with x=1/3) synthesized by an alloy-guided reaction. The simultaneous occupancy of the four magnetic elements and Sn, the individual single-atom-thick A layers in the compound constitute high-entropy-alloy analogues, two-dimensional in the sense that the alloying exclusively occurs in the A layers. V2(A'xSn1-x)C exhibit distinct ferromagnetic behavior that can be compositionally tailored from the multielement A-layer alloying. This two-dimensional alloying provides a structural-design route with expanded chemical space for discovering materials and exploit properties.

cond-mat.mtrl-sci↗

arXiv2019

Synthesis of MAX Phases Nb2CuC and Ti2(Al0.1Cu0.9)N by A-site Replacement Reaction in Molten Salts

New MAX phases Ti2(AlxCu1-x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically-resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase was only close to complete at Ti2(Al0.1Cu0.9)N. Density-functional theory calculations corroborated the structural stability of Nb2CuC and Ti2CuN phases. Moreover, the calculated cleavage energy in these Cu-containing MAX phases are weaker than in their Al-containing counterparts, indicating that they are precursor candidates for MXene derivation.

cond-mat.mtrl-sci↗