arXiv subjects

Lars Imsland

Publications and source records attributed to Lars Imsland.

10 recordsLinked to original sources

arXiv2026

Adaptive Tuning of Online Feedback Optimization for Process Control Applications

Online Feedback Optimization leverages properties of optimization algorithms to develop controllers for systems with limited model availability, which is often the case in process control. The interplay between the parameters of the chosen optimization algorithm, as well as lack of direct connection to the characteristics of the underlying process make their tuning challenging. We propose a method for adaptive tuning of Online Feedback Optimization controllers based on scaled projected gradient descent by using sensitivity of the desired objective to the parameters of the algorithm. The proposed adaptive tuning method limits the operator-tunable parameters to scalar values that represent how much the control inputs and the objective can change between iterations without requiring either additional information about the controlled system or repeated experiments. Numerical studies on a gas lift and a continuously-stirred tank reactor processes confirm that our adaptive scheme improves closed-loop performance of Online Feedback optimization compared to standard manual tuning methods.

eess.SY↗

arXiv2025

Sensitivity of Online Feedback Optimization to time-varying parameters

Online Feedback Optimization uses optimization algorithms as dynamic systems to design optimal control inputs. The results obtained from Online Feedback Optimization depend on the setup of the chosen optimization algorithm. In this work we analyse the sensitivity of Online Feedback Optimization to the parameters of projected gradient descent as the algorithm of choice. We derive closed-form expressions for sensitivities of the objective function with respect to the parameters of the projected gradient and to time-varying model mismatch. The formulas are then used for analysis of model mismatch in a gas lift optimization problem. The results of the case study indicate that the sensitivity of Online Feedback Optimization to the model mismatch depends on how long the controller has been running, with decreasing sensitivity to mismatch in individual timesteps for long operation times.

math.OC↗

arXiv2024

Tuning of Online Feedback Optimization for setpoint tracking in centrifugal compressors

Online Feedback Optimization (OFO) controllers steer a system to its optimal operating point by treating optimization algorithms as auxiliary dynamic systems. Implementation of OFO controllers requires setting the parameters of the optimization algorithm that allows reaching convergence, posing a challenge because the convergence of the optimization algorithm is often decoupled from the performance of the controlled system. OFO controllers are also typically designed to ensure steady-state tracking by fixing the sampling time to be longer than the time constants of the system. In this paper, we first quantify the impact of OFO parameters and the sampling time on the tracking error and number of oscillations of the controlled system, showing that adjusting them without waiting for steady state allows good tracking. We then propose a tuning method for the sampling time of the OFO controller together with the parameters to allow tracking fast trajectories while reducing oscillations. We validate the proposed tuning approach in a pressure controller in a centrifugal compressor, tracking trajectories faster than the time needed to reach the steady state by the compressor. The results of the validation confirm that simultaneous tuning of the sampling time and the parameters of OFO yields up to 87% times better tracking performance than manual tuning based on steady state.

eess.SY↗

arXiv2022

Passive learning to address nonstationarity in virtual flow metering applications

Steady-state process models are common in virtual flow meter applications due to low computational complexity, and low model development and maintenance cost. Nevertheless, the prediction performance of steady-state models typically degrades with time due to the inherent nonstationarity of the underlying process being modeled. Few studies have investigated how learning methods can be applied to sustain the prediction accuracy of steady-state virtual flow meters. This paper explores passive learning, where the model is frequently calibrated to new data, as a way to address nonstationarity and improve long-term performance. An advantage with passive learning is that it is compatible with models used in the industry. Two passive learning methods, periodic batch learning and online learning, are applied with varying calibration frequency to train virtual flow meters. Six different model types, ranging from data-driven to first-principles, are trained on historical production data from 10 petroleum wells. The results are two-fold: first, in the presence of frequently arriving measurements, frequent model updating sustains an excellent prediction performance over time; second, in the presence of intermittent and infrequently arriving measurements, frequent updating in addition to the utilization of expert knowledge is essential to increase the performance accuracy. The investigation may be of interest to experts developing soft-sensors for nonstationary processes, such as virtual flow meters.

eess.SY↗

arXiv2021

On gray-box modeling for virtual flow metering

A virtual flow meter (VFM) enables continuous prediction of flow rates in petroleum production systems. The predicted flow rates may aid the daily control and optimization of a petroleum asset. Gray-box modeling is an approach that combines mechanistic and data-driven modeling. The objective is to create a computationally feasible VFM for use in real-time applications, with high prediction accuracy and scientifically consistent behavior. This article investigates five different gray-box model types in an industrial case study using real, historical production data from 10 petroleum wells, spanning at most four years of production. The results are diverse with an oil flow rate prediction error in the range of 1.8%-40.6%. Further, the study casts light upon the nontrivial task of balancing learning from both physics and data. Consequently, providing general recommendations towards the suitability of different hybrid models is challenging. Nevertheless, the results are promising and indicate that gray-box VFMs may reduce the prediction error of a mechanistic VFM while remaining scientifically consistent. The findings motivate further experimentation with gray-box VFM models and suggest several future research directions to improve upon the performance and scientific consistency.

cs.LG↗

arXiv2021

Identifiability and physical interpretability of hybrid, gray-box models -- a case study

Model identifiability concerns the uniqueness of uncertain model parameters to be estimated from available process data and is often thought of as a prerequisite for the physical interpretability of a model. Nevertheless, model identifiability may be challenging to obtain in practice due to both stochastic and deterministic uncertainties, e.g. low data variability, noisy measurements, erroneous model structure, and stochasticity and locality of the optimization algorithm. For gray-box, hybrid models, model identifiability is rarely obtainable due to a high number of parameters. We illustrate through an industrial case study - modeling of a production choke valve in a petroleum well - that physical interpretability may be preserved even for non-identifiable models with adequate parameter regularization in the estimation problem. To this end, in a real industrial scenario, it may be beneficial for the model's predictive performance to develop hybrid over mechanistic models, as the model flexibility is higher. Modeling of six petroleum wells on the asset Edvard Grieg using historical production data show a 35\% reduction in the median prediction error across the wells comparing a hybrid to a mechanistic model. On the other hand, both the predictive performance and physical interpretability of the developed models are influenced by the available data. The findings encourage research into online learning and other hybrid model variants to improve the results.

eess.SY↗

arXiv2020

Developing a Hybrid Data-Driven, Mechanistic Virtual Flow Meter -- a Case Study

Virtual flow meters, mathematical models predicting production flow rates in petroleum assets, are useful aids in production monitoring and optimization. Mechanistic models based on first-principles are most common, however, data-driven models exploiting patterns in measurements are gaining popularity. This research investigates a hybrid modeling approach, utilizing techniques from both the aforementioned areas of expertise, to model a well production choke. The choke is represented with a simplified set of first-principle equations and a neural network to estimate the valve flow coefficient. Historical production data from the petroleum platform Edvard Grieg is used for model validation. Additionally, a mechanistic and a data-driven model are constructed for comparison of performance. A practical framework for development of models with varying degree of hybridity and stochastic optimization of its parameters is established. Results of the hybrid model performance are promising albeit with considerable room for improvements.

eess.SY↗

arXiv2020

Adaptation of Engineering Wake Models using Gaussian Process Regression and High-Fidelity Simulation Data

This article investigates the optimization of yaw control inputs of a nine-turbine wind farm. The wind farm is simulated using the high-fidelity simulator SOWFA. The optimization is performed with a modifier adaptation scheme based on Gaussian processes. Modifier adaptation corrects for the mismatch between plant and model and helps to converge to the actual plan optimum. In the case study the modifier adaptation approach is compared with the Bayesian optimization approach. Moreover, the use of two different covariance functions in the Gaussian process regression is discussed. Practical recommendations concerning the data preparation and application of the approach are given. It is shown that both the modifier adaptation and the Bayesian optimization approach can improve the power production with overall smaller yaw misalignments in comparison to the Gaussian wake model.

eess.SY↗

arXiv2017

Stochastic Nonlinear Model Predictive Control with State Estimation by Incorporation of the Unscented Kalman Filter

Nonlinear model predictive control has become a popular approach to deal with highly nonlinear and unsteady state systems, the performance of which can however deteriorate due to unaccounted uncertainties. Model predictive control is commonly used with states from a state estimator in place of the exact states without consideration of the error. In this paper an approach is proposed by incorporating the unscented Kalman filter into the NMPC problem, which propagates uncertainty introduced from both the state estimate and additive noise from disturbances forward in time. The feasibility is maintained through probabilistic constraints based on the Gaussian approximations of the state distributions. The concept of robust horizon is introduced to limit the open loop covariances, which otherwise grow too large and lead to conservativeness and infeasibility of the MPC problem. The effectiveness of the approach was tested on a challenging semi batch reactor case study with an economic objective.

math.OC↗

arXiv2016

Optimal Boundary Control of 2x2 Linear Hyperbolic PDEs

The present paper develops an optimal linear quadratic boundary controller for $2\times2$ linear hyperbolic partial differential equations (PDEs) with actuation on only one end of the domain. First-order necessary conditions for optimality is derived via weak variations and an optimal controller in state-feedback form is presented. The linear quadratic regulator (LQR) controller is calculated from differential algebraic Riccati equations. Numerical examples are performed to show the use of the proposed method.

math.OC↗