arXiv subjects

Lars Mattsson

Publications and source records attributed to Lars Mattsson.

At least 37 records · Page 2Linked to original sources

arXiv2019

Kinetics and clustering of dust particles in supersonic turbulence with self-gravity

We present a simulation of isothermal supersonic (rms Mach number $\mathcal{M}_{\rm rms} \sim 3$) turbulent gas with inertial particles (dust) and self-gravity in statistical steady-state, which we compare with a corresponding simulation without self-gravity. The former is in steady state, but close to gravitationally unstable, since we match the scale of the simulation box with Jeans wavelength, which provides the strongest influence of gravity on the dynamics of gas and dust without causing irreversible gravitational collapses. We find that self-gravity does not cause any significant increase in clustering of particles, regardless of particle size, but heavy particles show elevated mean velocities in the presence of self-gravity. The speed distributions are significantly shifted to higher values compared to simulations without self-gravity, but maintains the same shape.

astro-ph.GA↗

arXiv2019

Dust-depletion sequences in damped Ly-α absorbers II. The composition of cosmic dust, from low-metallicity systems to the Galaxy

We aim at assessing what are the most dominant dust species or types, including silicate and iron oxide grains present in the ISM, by using recent observations of dust depletion of galaxies at various evolutionary stages. We use the observed elemental abundances in dust of several metals (O, S, Si, Mg, and Fe) in different environments, considering systems with different metallicities and dust content, namely damped Lyman-α absorbers (DLAs) towards quasars and the Galaxy. We derive a possible dust composition by computationally finding the statistically expected elemental abundances in dust assuming a set of key dust species with the iron content as a free parameter. Carbonaceous dust is not considered in the present study. Metallic iron (likely in the form of inclusions in silicate grains) and iron oxides is an important component of the mass composition of carbon-free dust. Iron oxides make up a significant mass fraction (~1/4 in some cases) of the oxygen-bearing dust and there are good reasons to believe that metallic iron constitutes a similar mass fraction of dust. Wüstite (FeO) could be a simple explanation for the depletion of iron and oxygen because it is easily formed. There appears to be no silicate species clearly dominating the silicate mass, but rather a mix of iron-poor as well as iron-rich olivine and pyroxene. To what extent sulphur depletion is due to sulfides remains unclear. In general, there seems to be little evolution of the dust composition (not considering carbonaceous dust) from low-metallicity systems to the Galaxy.

astro-ph.GA↗

arXiv2018

Small-scale clustering of nano-dust grains in turbulent interstellar molecular clouds [Extended version]

Clustering and dynamics of nano-sized particles (nano dust) is investigated using high-resolution ($1024^3$) simulations of compressible isothermal hydrodynamic turbulence, intended to mimic the conditions inside cold molecular clouds in the interstellar medium. Nano-sized grains may cluster in a turbulent flow (small-scale clustering), which increases the local grain density significantly. Together with the increased interaction rate due to turbulent motions, aggregation of interstellar nano-dust may be plausible.

astro-ph.GA↗

arXiv2018

Clustering and dynamic decoupling of dust grains in turbulent molecular clouds

We present high resolution ($1024^3$) simulations of super-/hyper-sonic isothermal hydrodynamic turbulence inside an interstellar molecular cloud (resolving scales of typically 20 -- 100 AU), including a multi-disperse population of dust grains, i.e., a range of grain sizes is considered. Due to inertia, large grains (typical radius $a \gtrsim 1.0\,μ$m) will decouple from the gas flow, while small grains ($a\lesssim 0.1\,μ$m) will tend to better trace the motions of the gas. We note that simulations with purely solenoidal forcing show somewhat more pronounced decoupling and less clustering compared to simulations with purely compressive forcing. Overall, small and large grains tend to cluster, while intermediate-size grains show essentially a random isotropic distribution. As a consequence of increased clustering, the grain-grain interaction rate is locally elevated; but since small and large grains are often not spatially correlated, it is unclear what effect this clustering would have on the coagulation rate. Due to spatial separation of dust and gas, a diffuse upper limit to the grain sizes obtained by condensational growth is also expected, since large (decoupled) grains are not necessarily located where the growth species in the molecular gas is.

astro-ph.GA↗

arXiv2017

Improved implementation of dust-driven winds and dust formation in models of AGB evolution: Effects of pulsation and gas-pressure forcing

Mass loss is a crucial component in stellar evolution models, since it largely determines the rate of evolution at the later stages of a star's life. The dust-driven outflows from AGB stars are particularly important in this regard. Including AGB dust formation in a stellar evolution model does also require a model of these outflows. Since AGB stars exhibit large-amplitude pulsation, a model based on time-dependent radiation hydrodynamics (RHD) is needed in order to capture all the important physical aspects of dust formation. However, this cannot be afforded in a stellar evolution model. Here, a mean-flow model is presented, which include corrections to the steady-state model currently being used in AGB evolution models with dust formation.

astro-ph.SR↗

arXiv2016

An analytical test case for dust dynamics during a shock-wave passage

An exact solution of a forced Burgers' equation representing the dynamics of a "dust fluid" in a one-dimensional flow is presented. The test case considered starts with a steady (time independent) two-fluid flow in one dimension, where the two fluid components represent gas and dust. It is then assumed that a shock wave travels through the gas at a constant speed and without radiative energy losses and diffusion. Then, adopting a constant stopping time for the dust particles in the dust fluid (mono-dispersed grain sizes), the equation of motion for the dust fluid can be transformed into a simple ordinary differential equation, which is satisfied by the Wright omega function. Implications for the formation of detached shells around carbon stars are briefly discussed.

physics.flu-dyn↗

arXiv2016

Dust-depletion sequences in damped Lyman-α absorbers: a unified picture from low-metallicity systems to the Galaxy

We study metal depletion due to dust in the interstellar medium (ISM) to infer the properties of dust grains and characterize the metal and dust content of galaxies, down to low metallicity and intermediate redshift z. We provide metal column densities and abundances of a sample of 70 damped Lyman-α absorbers (DLAs) towards quasars, observed at high spectral resolution with the Very Large Telescope (VLT) Ultraviolet and Visual Echelle Spectrograph (UVES). This is the largest sample of phosphorus abundances measured in DLAs so far. We use literature measurements for Galactic clouds to cover the high-metallicity end. We discover tight (scatter <= 0.2 dex) correlations between [Zn/Fe] and the observed relative abundances from dust depletion. This implies that grain growth in the ISM is an important process of dust production. These sequences are continuous in [Zn/Fe] from dust-free to dusty DLAs, and to Galactic clouds, suggesting that the availability of refractory metals in the ISM is crucial for dust production, regardless of the star formation history. We observe [S/Zn] up to ~ 0.25 dex in DLAs, which is broadly consistent with Galactic stellar abundances. Furthermore, we find a good agreement between the nucleosynthetic pattern of Galactic halo stars and our observations of the least dusty DLAs. This supports recent star formation in low-metallicity DLAs. The derived depletions of Zn, O, P, S, Si, Mg, Mn, Cr, and Fe correlate with [Zn/Fe], with steeper slopes for more refractory elements. P is mostly not affected by dust depletion. We present canonical depletion patterns, to be used as reference in future studies of relative abundances and depletion. We derive the total (dust-corrected) metallicity, typically -2 <= [M/H]tot <= 0 for DLAs, and scattered around solar metallicity for the Galactic ISM. The dust-to-metal ratio increases with metallicity... [abridged]

astro-ph.GA↗

arXiv2016

Modelling dust processing and the evolution of grain sizes in the ISM using the method of moments

Interstellar dust grains do not have a single well-defined origin. Stars are demonstrably dust producers, but also efficient destroyers of cosmic dust. Dust destruction in the ISM is believed to be the result of SN shocks hitting the ambient ISM gas (and dust) and lead to an increased rate of ion sputtering, which reduces the dust mass. Grains located in cold molecular clouds can on the other hand grow by condensation, thus providing a replenishment mechanism or even a dominant channel of dust formation. In dense environments grains may coagulate and form large composite grains and aggregates and if grains collide with large enough energies they may be shattered, forming a range of smaller debris grains. The present paper presents a statistical modelling approach using the method of moments, which is computationally very inexpensive and may therefore be an attractive option when combining dust processing with, e.g., detailed simulations of interstellar gas dynamics. A solar-neighbourhood-like toy model of interstellar dust evolution is presented as an example.

astro-ph.GA↗

arXiv2015

The sudden appearance of dust in the early Universe

Observations suggest that high-redshift galaxies are either very dusty or essentially dust free. The evolution from one regime to the other must also be very fast, since evolved and dusty galaxies show up at redshifts corresponding to a Universe which is only about 500 Myr old. In the present paper models which predicts the existence of an apparent dichotomy between dusty and dust-free galaxies at high redshift are considered. Galaxies become dusty as soon as they reach an evolved state and the transition is very rapid. A special case suggests that while stellar dust production is overall relatively insignificant -- contrary to what has been argued recently -- it can at the same time be consistent with efficient dust production in supernovae in the local Universe. Special attention will be given to the recent discovery of a dusty normal galaxy (A1689-zD1) at a very high redshift z = 7.5 +/- 0.2.

astro-ph.GA↗

arXiv2015

How important are metal-poor AGB stars as cosmic dust producers?

The efficiency of dust formation in oxygen-rich AGB stars should (in theory) be metallicity dependent since they are not producing their own raw material for dust production. Metal-poor carbon stars may not be very efficient dust producers either, because of more radiative heating of the grains forming in their atmospheres. We have just confirmed that inefficient dust and wind formation in simulations of metal-poor carbon stars is a real physical effect, albeit within the limitations of our simulations. Taken at face value, this implies that the amount of dust supplied by low-metallicity AGB stars to the build up of the cosmic dust component is clearly limited. Consequently, one may also ask how large a contribution AGB stars can make in general, when compared to recent observations of cosmic dust, which are suggesting major contributions from other sources?

astro-ph.SR↗

arXiv2015

Runaway growth of fractal dust grains

Fractal grains have large surface area, which leads to more efficient condensation. The special limit case where the volume-area ratio is constant (corresponding to, e.g., a very rough grain surface or non-compacts aggregates) is particularly interesting, as well as convenient, from a mathematical point of view. If dust grains from AGB stars have `rough surfaces', it may have important implications for our understanding of dust and wind formation in AGB stars.

astro-ph.SR↗

arXiv2015

From flux to dust mass: Does the grain-temperature distribution matter for estimates of cold dust masses in supernova remnants?

The amount of dust estimated from infrared to sub-millimetre (submm) observations strongly depends on assumptions of different grain sizes, compositions and optical properties. Here we use a simple model of thermal emission from cold silicate/carbon dust at a range of dust grain temperatures and fit the spectral energy distribution (SED) of the Crab Nebula as a test. This can lower the derived dust mass for the Crab by ~50% and 30-40% for astronomical silicates and amorphous carbon grains compared to recently published values (0.25M_sun -> 0.12M_sun and 0.12M_sun -> 0.072M_sun, respectively), but the implied dust mass can also increase by as much as almost a factor of six (0.25M_sun -> 1.14M_sun and 0.12M_sun -> 0.71M_sun) depending on assumptions regarding the sizes/temperatures of the coldest grains. The latter values are clearly unrealistic due to the expected metal budget, though. Furthermore, we show by a simple numerical experiment that if a cold-dust component does have a grain-temperature distribution, it is almost unavoidable that a two-temperature fit will yield an incorrect dust mass estimate. But we conclude that grain temperatures is not a greater uncertainty than the often poorly constrained emissivities (i.e., material properties) of cosmic dust, although there is clearly a need for improved dust emission models. The greatest complication associated with deriving dust masses still arises in the uncertainty in the dust composition.

astro-ph.SR↗

arXiv2014

On the (in)variance of the dust-to-metals ratio in galaxies

Recent works have demonstrated a surprisingly small variation of the dust-to-metals ratio in different environments and a correlation between dust extinction and the density of stars. Naively, one would interpret these findings as strong evidence of cosmic dust being produced mainly by stars. But other observational evidence suggest there is a significant variation of the dust-to-metals ratio with metallicity. As we demonstrate in this paper, a simple star-dust scenario is problematic also in the sense that it requires that destruction of dust in the interstellar medium (e.g., due to passage of supernova shocks) must be highly inefficient. We suggest a model where stellar dust production is indeed efficient, but where interstellar dust growth is equally important and acts as a replenishment mechanism which can counteract the effects of dust destruction. This model appears to resolve the seemingly contradictive observations, given that the ratio of the effective (stellar) dust and metal yields is not universal and thus may change from one environment to another, depending on metallicity.

astro-ph.GA↗

arXiv2012

Dust driven mass loss from carbon stars as a function of stellar parameters - I. A grid of Solar-metallicity wind models (Corrigendum)

The purpose of this corrigendum is to point out that a handful of models in the original paper were computed with faulty initial structures. Using exactly the same modelling methods we have recomputed the faulty models with new initial structures. The new results slightly changes some of the trends in the wind properties with stellar parameters, but the overall effects are small. The conclusions are not affected.

astro-ph.SR↗

arXiv2012

"Counterpart" method for abundance determinations in HII regions

We suggest a new way of the determining abundances and electron temperatures in HII regions from strong emission lines. Our approach is based on the standard assumption that HII regions with similar intensities of strong emission lines have similar physical properties and abundances. A "counterpart" for a studied HII region may be chosen among HII regions with well-measured abundances (reference HII regions) by comparison of carefully chosen combinations of strong line intensities. Then the abundances in the investigated HII region can be assumed to be the same as that in its counterpart. In other words, we suggest to determine the abundances in HII regions "by precedent". To get more reliable abundances for the considered HII region, a number of reference HII regions is selected and then the abundances in the target HII region is estimated through extra-/interpolation. We will refer to this method of abundance determination as the counterpart method or, for brevity, the C method. We define a sample of reference HII regions and verify the validity of the C method. We find that this method produces reliable abundances. Finally, the C method is used to obtain the radial abundance distributions in the extended discs of the spiral galaxies M83, NGC4625 and NGC 628.

astro-ph.CO↗

arXiv2012

On the dust abundance gradients in late-type galaxies: II. Analytical models as evidence for massive interstellar dust growth in SINGS galaxies

We use simple analytical models of the build up of the dust component and compare these with radial dust distributions derived from observations of SINGS galaxies. The observations show that dust gradients are indeed typically steeper than the corresponding metallicity gradients and our models indicate very little dust destruction, but significant dust growth in the ISM for most of these galaxies. Hence, we conclude that there is evidence for significant non-stellar dust production, and little evidence for dust destruction due to SNe shock waves. We find that dust is reprocessed rather than destroyed by shocks from SNe. Finally, we argue that dust abundances derived using standard methods may be overestimated, since even very 'generous' estimates of the metallicity results in dust-to-metals ratios above unity in several cases, if the dust abundances given in the literature are taken at face value.

astro-ph.CO↗

arXiv2012

On the dust abundance gradients in late-type galaxies: I. Effects of destruction and growth of dust in the interstellar medium

We present basic theoretical constraints on the effects of destruction by supernovae (SNe) and growth of dust grains in the interstellar medium (ISM) on the radial distribution of dust in late-type galaxies. The radial gradient of the dust-to-metals ratio is shown to be essentially flat (zero) if interstellar dust is not destroyed by SN shock waves and all dust is produced in stars. If there is net dust destruction by SN shock waves, the dust-to-metals gradient is flatter than or equal to the metallicity gradient (assuming the gradients have the same sign). Similarly, if there is net dust growth in the ISM, then the dust-to-metals gradient is steeper than or equal to the metallicity gradient. The latter result implies that if dust gradients are steeper than metallicity gradients, i.e., the dust-to-metals gradients are not flat, then it is unlikely dust destruction by SN shock waves is an efficient process, while dust growth must be a significant mechanism for dust production. Moreover, we conclude that dust-to-metals gradients can be used as a diagnostic for interstellar dust growth in galaxy discs, where a negative slope indicates dust growth.

astro-ph.CO↗

arXiv2011

Dust driven mass loss from carbon stars as function of stellar parameters - II. Effects of grain size on wind properties

[Abridged] In this paper we explore grain size effects on wind properties of carbon stars, using a generalized description of radiative cross sections valid for particles of arbitrary sizes. The purpose of the study is to investigate under which circumstances the small particle limit (SPL) may give acceptable results, and to quantify the possible errors that may occur when it does not hold. The time-dependent description of grain growth in our detailed radiation-hydrodynamical models gives information about dust particle radii in every layer at every instant of time. These grain radii are used for computing opacities and determining the radiative acceleration of the dust-gas mixture. It is shown that in the critical cases the effect of the generalized description of dust opacities can be significant, resulting in more intense mass loss and higher wind velocities compared to models using SPL opacities. For well-developed winds, however, grain size effects on mass loss rates and wind velocities are found to be small. Both groups of models tend towards lower degrees of dust condensation compared to corresponding SPL models, due to a self-regulating feedback between grain growth and radiative acceleration. Consequently, the "dust-loss rates" are lower in the models with the generalized treatment of grain opacities. We conclude that our previous results on mass loss rates obtained with SPL opacities are reliable within a wide region of stellar parameter space, except for critical cases close to thresholds of dust-driven outflows where SPL models will tend to underestimate the mass loss rates and wind velocities.

astro-ph.SR↗