arXiv subjects

Laura M. Herz

Publications and source records attributed to Laura M. Herz.

13 recordsLinked to original sources

arXiv2026

Plasmon Induced Delocalized Second-Harmonic Generation Towards Buried-Interface Spectroscopy

Second-harmonic generation microscopy is a powerful technique capable of probing local crystal symmetries and electric fields at interfaces. However, it often suffers from weak signal strength and is difficult to understand in multilayer systems where many materials can give competing signal contributions. In this work we present direct observation of delocalized, surface plasmon polariton-mediated second-harmonic generation on gold monocrystalline surfaces and structures. We generate second-harmonic light up to 35 um from the excitation spot and, excitingly, we obtain signal from atomically flat surfaces without a fundamental excitation beam present in the same region. We reveal that this process arises from the interaction of two counter-propagating surface plasmon polaritons, which we believe to be the first observation of this process at the microscale. This signal has the same polarisation dependence as localised second-harmonic generation and is emitted in a collimated beam travelling perpendicular to the sample surface. In part due to local electric field enhancements, we were able to observe these signals on a CMOS camera with 1 s exposure and no gain using an industrial-grade pulsed laser. Our results enable wide area multilayer samples to be probed using a single excitation beam, with applications including in energy, catalysis and single particle surface sensing.

physics.optics↗

arXiv2025

Ruddlesden-Popper defects act as a free surface: role in formation and photophysical properties of CsPbI3

The perovskite semiconductor, CsPbI3, holds excellent promise for solar cell applications due to its suitable bandgap. However, achieving phase-stable CsPbI3 solar cells with high power conversion efficiency remains a major challenge. Ruddlesden-Popper (RP) defects have been identified in a range of perovskite semiconductors, including CsPbI3. However, there is limited understanding as to why they form or their impact on stability and photophysical properties. Here we increase the prevalence of RP defects with increased Cs-excess in vapour-deposited CsPbI3 thin films and observe superior structural stability but inferior photophysical properties. Significantly, using electron microscopy, we find that the atomic positions at the planar defect are comparable to those of a free surface, revealing their role in phase stabilisation. Density functional theory (DFT) calculations reveal the RP planes are electronically benign, however, antisites observed at RP turning points are likely to be malign. We therefore propose that increasing RP planes while reducing RP turning points could offer a breakthrough for improving both phase stability and photophysical performance. The formation mechanism revealed here may well apply more generally to RP structures in other perovskite systems.

cond-mat.mtrl-sci↗

arXiv2024

A green solvent system for precursor phase-engineered sequential deposition of stable formamidinium lead triiodide for perovskite solar cells

Perovskite solar cells (PSCs) offer an efficient, inexpensive alternative to current photovoltaic technologies, with the potential for manufacture via high-throughput coating methods. However, challenges for commercial-scale solution-processing of metal-halide perovskites include the use of harmful solvents, the expense of maintaining controlled atmospheric conditions, and the inherent instabilities of PSCs under operation. Here, we address these challenges by introducing a high volatility, low toxicity, biorenewable solvent system to fabricate a range of 2D perovskites, which highly effective precursor phases for subsequent transformation to alpha-formamidinium lead triiodide (FAPbI3), fully processed under ambient conditions. PSCs utilising our FAPbI3 reproducibly show remarkable stability under illumination and elevated temperature (ISOS-L-2) and "damp heat" (ISOS-D-3) stressing, surpassing other state-of-the-art perovskite compositions. We determine that this enhancement is a consequence of the 2D precursor phase crystallisation route, which simultaneously avoids retention of residual low-volatility solvents (such as DMF and DMSO) and reduces the rate of degradation of FA+ in the material. Our findings highlight both the critical role of the initial crystallisation process in determining the operational stability of perovskite materials, and that neat FA+-based perovskites can be competitively stable despite the inherent metastability of the alpha-phase.

physics.app-ph↗

arXiv2024

Disentangling the Effects of Structure and Lone-Pair Electrons in the Lattice Dynamics of Halide Perovskites

Metal halide perovskites have shown great performance as solar energy materials, but their outstanding optoelectronic properties are paired with unusually strong anharmonic effects. It has been proposed that this intriguing combination of properties derives from the "lone pair" 6$s^2$ electron configuration of the Pb$^{2+}$ cations, and associated weak pseudo-Jahn-Teller effect, but the precise impact of this chemical feature remains unclear. Here we show that in fact an $ns^2$ electron configuration is not a prerequisite for the strong anharmonicity and low-energy lattice dynamics encountered in this class of materials. We combine X-ray diffraction, infrared and Raman spectroscopies, and first-principles molecular dynamics calculations to directly contrast the lattice dynamics of CsSrBr$_3$ with those of CsPbBr$_3$, two compounds which bear close structural similarity but with the former lacking the propensity to form lone pairs on the 5$s^0$ octahedral cation. We exploit low-frequency diffusive Raman scattering, nominally symmetry-forbidden in the cubic phase, as a fingerprint to detect anharmonicity and reveal that low-frequency tilting occurs irrespective of octahedral cation electron configuration. This work highlights the key role of structure in perovskite lattice dynamics, providing important design rules for the emerging class of soft perovskite semiconductors for optoelectronic and light-harvesting devices.

cond-mat.mtrl-sci↗

arXiv2024

Factors Enabling Delocalized Charge-Carriers in Pnictogen-Based Solar Absorbers: In-depth Investigation into CuSbSe2

Inorganic semiconductors based on heavy pnictogen cations (Sb3+ and Bi3+) have gained significant attention as potential nontoxic and stable alternatives to lead-halide perovskites for solar cell applications. A limitation of these novel materials, which is being increasingly commonly found, is carrier localization, which substantially reduces mobilities and diffusion lengths. Herein, the layered příbramite CuSbSe2 is investigated and discovered to have delocalized free carriers, as shown through optical pump terahertz probe spectroscopy and temperature-dependent mobility measurements. Using a combination of theory and experiment, it is found that the underlying factors are: 1) weak coupling to acoustic phonons due to low deformation potentials, as lattice distortions are primarily accommodated through rigid inter-layer movement rather than straining inter-atomic bonds, and 2) weak coupling to optical phonons due to the ionic contributions to the dielectric constant being low compared to electronic contributions. This work provides important insights into how pnictogen-based semiconductors avoiding carrier localization could be identified.

cond-mat.mtrl-sci↗

arXiv2021

Hot electron cooling in InSb probed by ultrafast time-resolved terahertz cyclotron resonance

Measuring terahertz (THz) conductivity on an ultrafast time scale is an excellent way to observe charge-carrier dynamics in semiconductors as a function of time after photoexcitation. However, a conductivity measurement alone cannot separate the effects of charge-carrier recombination from effective mass changes as charges cool and experience different regions of the electronic band structure. Here we present a form of time-resolved magneto-THz spectroscopy which allows us to measure cyclotron effective mass on a picosecond time scale. We demonstrate this technique by observing electron cooling in the technologically-significant narrow-bandgap semiconductor indium antimonide (InSb). A significant reduction of electron effective mass from 0.032$m_\mathrm{e}$ to 0.017$m_\mathrm{e}$ is observed in the first 200ps after injecting hot electrons. Measurement of electron effective mass in InSb as a function of photo-injected electron density agrees well with conduction band non-parabolicity predictions from ab initio calculations of the quasiparticle band structure.

cond-mat.mtrl-sci↗

arXiv2021

Limits to Electrical Mobility in Lead-Halide Perovskite Semiconductors

Semiconducting polycrystalline thin films are cheap to produce and can be deposited on flexible substrates, yet high-performance electronic devices usually utilize single-crystal semiconductors, owing to their superior electrical mobilities and longer diffusion lengths. Here we show that the electrical performance of polycrystalline films of metal-halide perovskites (MHPs) approaches that of single crystals at room temperature. Combining temperature-dependent terahertz conductivity measurements and ab initio calculations we uncover a complete picture of the origins of charge scattering in single crystals and polycrystalline films of CH$_3$NH$_3$PbI$_3$. We show that Fröhlich scattering of charge carriers with multiple phonon modes is the dominant mechanism limiting mobility, with grain-boundary scattering further reducing mobility in polycrystalline films. We reconcile the large discrepancy in charge diffusion lengths between single crystals and films by considering photon reabsorption. Thus, polycrystalline films of MHPs offer great promise for devices beyond solar cells, including transistors and modulators.

physics.app-ph↗

arXiv2017

Cs$_2$InAgCl$_6$: A new lead-free halide double perovskite with direct band gap

A$_2$BB$^\prime$X$_6$ halide double perovskites based on bismuth and silver have recently been proposed as potential environmentally-friendly alternatives to lead-based hybrid halide perovskites. In particular, Cs$_2$BiAgX$_6$ (X = Cl, Br) have been synthesized and found to exhibit band gaps in the visible range. However, the band gaps of these compounds are indirect, which is not ideal for applications in thin film photovoltaics. Here, we propose a new class of halide double perovskites, where the B$^{3+}$ and B$^{+}$ cations are In$^{3+}$ and Ag$^{+}$, respectively. Our first-principles calculations indicate that the hypothetical compounds Cs$_2$InAgX$_6$ (X = Cl, Br, I) should exhibit direct band gaps between the visible (I) and the ultraviolet (Cl). Based on these predictions, we attempt to synthesize Cs$_2$InAgCl$_6$ and Cs$_2$InAgBr$_6$, and we succeed to form the hitherto unknown double perovskite Cs$_2$InAgCl$_6$. X-ray diffraction yields a double perovskite structure with space group $Fm\overline{3}m$. The measured band gap is 3.3 eV, and the compound is found to be photosensitive and turns reversibly from white to orange under ultraviolet illumination. We also perform an empirical analysis of the stability of Cs$_2$InAgX$_6$ and their mixed halides based on Goldschmidt's rules, and we find that it should also be possible to form Cs$_2$InAg(Cl$_{1-x}$Br$_{x}$)$_6$ for $x<1$. The synthesis of mixed halides will open the way to the development of lead-free double perovskites with direct and tunable band gaps.

cond-mat.mtrl-sci↗

arXiv2017

Perovskite-perovskite tandem photovoltaics with optimized bandgaps

We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs.

cond-mat.mtrl-sci↗

arXiv2012

Extreme sensitivity of graphene photoconductivity to environmental gases

Graphene is a single layer of covalently bonded carbon atoms, which was discovered only 8 years ago and yet has already attracted intense research and commercial interest. Initial research focused on its remarkable electronic properties, such as the observation of massless Dirac fermions and the half-integer quantum Hall effect. Now graphene is finding application in touch-screen displays, as channels in high-frequency transistors and in graphene-based integrated circuits. The potential for using the unique properties of graphene in terahertz-frequency electronics is particularly exciting; however, initial experiments probing the terahertz-frequency response of graphene are only just emerging. Here we show that the photoconductivity of graphene at terahertz frequencies is dramatically altered by the adsorption of atmospheric gases, such as nitrogen and oxygen. Furthermore, we observe the signature of terahertz stimulated emission from gas-adsorbed graphene. Our findings highlight the importance of environmental conditions on the design and fabrication of high-speed, graphene-based devices.

cond-mat.mes-hall↗

arXiv2008

Mesoscopic order and the dimentionality of long-range resonance energy transfer in supramolecular semiconductors

We present time-resolved photoluminescence measurements on two series of oligo-p-phenylenevinylene materials that self-assemble into supramolecular nanostructures with thermotropic reversibility in dodecane. One set of derivatives form chiral, helical stacks while the second set form less organised, frustrated stacks. Here we study the effects of supramolecular organisation on the resonance energy transfer rates. We measure these rates in nanoassemblies formed with mixed blends of oligomers and compare them with the rates predicted by Foerster theory. Our results and analysis show that control of supramolecular order in the nanometre lengthscale has a dominant effect on the efficiency and dimentionality of resonance energy transfer.

cond-mat.mtrl-sci↗

arXiv2004

Exciton Regeneration at Polymeric Semiconductor Heterojunctions

Control of the band-edge offsets at heterojunctions between organic semiconductors allows efficient operation of either photovoltaic or light-emitting diodes. We investigate systems where the exciton is marginally stable against charge separation, and show via E-field-dependent time-resolved photoluminescence spectroscopy that excitons that have undergone charge separation at a heterojunction can be efficiently regenerated. This is because the charge transfer produces a geminate electron-hole pair (separation 2.2-3.1nm) which may collapse into an exciplex and then endothermically (E=100-200meV) back-transfer towards the exciton.

cond-mat.soft↗

arXiv2003

Exciton bimolecular annihilation dynamics in supramolecular nanostructures of conjugated oligomers

We present femtosecond transient absorption measurements on $π$-conjugated supramolecular assemblies in a high pump fluence regime. Oligo(\emph{p}-phenylenevinylene) monofunctionalized with ureido-\emph{s}-triazine (MOPV) self-assembles into chiral stacks in dodecane solution below 75$^{\circ}$C at a concentration of $4\times 10^{-4}$ M. We observe exciton bimolecular annihilation in MOPV stacks at high excitation fluence, indicated by the fluence-dependent decay of $1^1$B$_{u}$-exciton spectral signatures, and by the sub-linear fluence dependence of time- and wavelength-integrated photoluminescence (PL) intensity. These two characteristics are much less pronounced in MOPV solution where the phase equilibrium is shifted significantly away from supramolecular assembly, slightly below the transition temperature. A mesoscopic rate-equation model is applied to extract the bimolecular annihilation rate constant from the excitation fluence dependence of transient absorption and PL signals. The results demonstrate that the bimolecular annihilation rate is very high with a square-root dependence in time. The exciton annihilation results from a combination of fast exciton diffusion and resonance energy transfer. The supramolecular nanostructures studied here have electronic properties that are intermediate between molecular aggregates and polymeric semiconductors.

cond-mat.soft↗