arXiv subjects

Laurent Duchemin

Publications and source records attributed to Laurent Duchemin.

15 recordsLinked to original sources

arXiv2025

Wave induced fracture of a sea ice analog

We study at the laboratory scale the rupture of thin floating sheets made of a brittle material under a wave-induced mechanical forcing. We show that the rupture occurs where the curvature is maximum and the break-up threshold strongly depends on the wave properties. We observe that the critical stress for fracture depends on the forcing wavelength. Hence our observations are incompatible with a critical stress criterion for fracture. Instead, our measurements can be rationalized as an energy criterion: a fracture propagates when the material surface energy is lower than the released elastic energy, which depends on the forcing geometry. In light of these findings, it may be worthwhile to revisit current numerical models of sea ice fracture by ocean waves.

physics.flu-dyn↗

arXiv2025

Breakup cascade in gas filament

Despite its importance in both geophysical and industrial contexts, the inertial fragmentation of gas filaments has received much less attention than their liquid counterparts. Yet, gas filaments produce the smallest bubble sizes, which drive gas dissolution, critical to ocean-atmosphere exchange such as carbon dioxide and oxygen, as well as marine aerosols emission, serving as nuclei for cloud condensation and ice particle production. Here, we unravel the fundamental physics governing the splitting of a single filament in a model geometry by combining numerical simulations, laboratory experiments and theory. We show that the splitting of a single filament generates a power-law bubble size distribution following $d^{-3/2}$ with $d$ the volume equivalent bubble diameter, suggesting the existence of a self-similar breakup mechanism, absent in liquid ligament fragmentation. We propose a deterministic model, based on the capillary fragmentation of a filament with power-law shape, which quantitatively captures the bubble size distribution. We demonstrate that the filament shape at breakup sets the size distribution of a first generation of bubbles. This distribution is then reproduced at smaller and smaller scales by latter breakups in a self-similar manner. The $d^{-3/2}$-distribution coincides with the size distribution of small bubbles observed in dilute turbulent flow, such as below breaking waves. We argue that the turbulent bubble size distribution observed in nature arises as the superposition of many individual filament splittings. The turbulence nature of the flow only sets the initial conditions of each splitting dynamics, and play no role in the bubble size selection.

physics.flu-dyn↗

arXiv2024

Freezing receding contact lines

We investigate experimentally the receding of a contact line when a Peltier module is pulled out of a water bath at constant speed, while a ice layer is also growing at constant speed on the Peltier module. A steady regime is therefore reached for all the parameters used in this studied, corresponding to a dynamical stationnary meniscus. We show that the height of the meniscus provides most of the properties of the flow. For high pulling rate, it is related to the amount of liquid of the equivalent Landau-Levich (LL) film that would be extracted from the bath, which is eventually freezing as the plate is lifted upward. For smaller velocity, so that no LL film would be formed without freezing, the meniscus height is directly linked to the contact angle of water on ice in these conditions. Solving numerically the meniscus equation taking into account the solidifcation of water, our results suggest that the contact angle of water on ice should be around $6^\circ$.

physics.flu-dyn↗

arXiv2022

MARS : a Method for the Adaptive Removal of Stiffness in PDEs

The E(xplicit)I(implicit)N(null) method was developed recently to remove numerical instability from PDEs, adding and subtracting an operator $\mathcal{D}$ of arbitrary structure, treating the operator implicitly in one case, and explicitly in the other. Here we extend this idea by devising an adaptive procedure to find an optimal approximation for $\mathcal{D}$. We propose a measure of the numerical error which detects numerical instabilities across all wavelengths, and adjust each Fourier component of $\mathcal{D}$ to the smallest value such that numerical instability is suppressed. We show that for a number of nonlinear and non-local PDEs, in one and two dimensions, the spectrum of $\mathcal{D}$ adapts automatically and dynamically to the theoretical result for marginal stability. Our method thus has the same stability properties as a fully implicit method, while only requiring the computational cost comparable to an explicit solver. The adaptive implicit part is diagonal in Fourier space, and thus leads to minimal overhead compared to the explicit method.

math.NA↗

arXiv2022

Frictional weakening induced by cohesion: the numerical case of cohesive granular failures

The failure of 2D numerical cohesive granular steps collapsing under gravity are simulated for a large range of cohesion. Focussing on the cumulative displacement of the grains, and defining a displacement threshold, we establish a sensible criterion for capturing the failure characteristics. We are able to locate the failure in time and to identify the different stages of the destabilisation. We find that the onset of the failure is delayed by increasing cohesion, but its duration becomes shorter. Defining a narrow displacement interval, a well-defined shear band revealing the failure comes out. Solving the equilibrium of the failing block, we are able to make successful predictions for the dependance between failure angle and cohesion, thereby disclosing two distinct frictional behaviour: while friction remains constant at small cohesion, it significantly decreases with cohesive properties at larger cohesion. The results hence reveal two regimes for the behaviour of cohesive granular matter depending on cohesion strength, revealing a cohesion-induced weakening mechanism.

cond-mat.soft↗

arXiv2020

Dimple drainage before the coalescence of a droplet deposited on a smooth substrate

Thin liquid or gas films are everywhere in nature, from foams to submillimetric bubbles at a free surface, and their rupture leaves a collection of small drops and bubbles. However, the mechanisms at play responsible for the bursting of these films is still in debate. The present study thus aims at understanding the drainage dynamics of the thin air film squeezed by gravity between a millimetric droplet and a smooth solid or a liquid thin film. Solving coupled lubrication equations and analyzing the dominant terms in the solid and liquid film cases, we explain why the drainage is much faster in the liquid film case, leading often to a shorter coalescence time, as observed in recent experiments.

physics.flu-dyn↗

arXiv2020

Bistability in Rayleigh-Bénard convection with a melting boundary

A pure and incompressible material is confined between two plates such that it is heated from below and cooled from above. When its melting temperature is comprised between these two imposed temperatures, an interface separating liquid and solid phases appears. Depending on the initial conditions, freezing or melting occurs until the interface eventually converges towards a stationary state. This evolution is studied numerically in a two-dimensional configuration using a phase-field method coupled with the Navier-Stokes equations. Varying the control parameters of the model, we exhibit two types of equilibria: diffusive and convective. In the latter case, Rayleigh-Bénard convection in the liquid phase shapes the solid-liquid front, and a macroscopic topography is observed. A simple way of predicting these equilibrium positions is discussed and then compared with the numerical simulations. In some parameter regimes, we show that multiple equilibria can coexist depending on the initial conditions. We also demonstrate that, in this bi-stable regime, transitioning from the diffusive to the convective equilibrium is inherently a nonlinear mechanism involving finite-amplitude perturbations.

physics.flu-dyn↗

arXiv2019

Rayleigh-Bénard convection with a melting boundary

We study the evolution of a melting front between the solid and liquid phases of a pure incompressible material where fluid motions are driven by unstable temperature gradients. In a plane layer geometry, this can be seen as classical Rayleigh-Bénard convection where the upper solid boundary is allowed to melt due to the heat flux brought by the fluid underneath. This free-boundary problem is studied numerically in two dimensions using a phase-field approach, classically used to study the melting and solidification of alloys, which we dynamically couple with the Navier-Stokes equations in the Boussinesq approximation. The advantage of this approach is that it requires only moderate modifications of classical numerical methods. We focus on the case where the solid is initially nearly isothermal, so that the evolution of the topography is related to the inhomogeneous heat flux from thermal convection, and does not depend on the conduction problem in the solid. From a very thin stable layer of fluid, convection cells appears as the depth -- and therefore the effective Rayleigh number of the layer increases. The continuous melting of the solid leads to dynamical transitions between different convection cell sizes and topography amplitudes. The Nusselt number can be larger than its value for a planar upper boundary, due to the feedback of the topography on the flow, which can stabilize large-scale laminar convection cells.

physics.flu-dyn↗

arXiv2016

Impact on floating membranes

When impacted by a rigid object, a thin elastic membrane with negligible bending rigidity floating on a liquid pool deforms. Two axisymmetric waves radiating from the impact point propagate. In the first place, a longitudinal wave front -- associated with in-plane deformation of the membrane and traveling at constant speed -- separates an outward stress free domain with a stretched but flat domain. Then, in the stretched domain a dispersive transverse wave travels at a wave speed that depends on the local stretching rate. We study the dynamics of this fluid-body system and we show that the wave dynamics is similar to the capillary waves that propagate at a liquid-gas interface but with a surface tension coefficient that depends on impact speed. We emphasize the role of the stretching in the membrane in the wave dynamics but also in the development of a buckling instability that give rise to radial wrinkles.

physics.flu-dyn↗

arXiv2015

Self-similar impulsive capillary waves on a ligament

We study the short-time dynamics of a liquid ligament, held between two solid cylinders, when one is impulsively accelerated along its axis. A set of one-dimensional equations in the slender-slope approximation is used to describe the dynamics, including surface tension and viscous effects. An exact self-similar solution to the linearized equations is successfully compared to experiments made with millimetric ligaments. Another non-linear self-similar solution of the full set of equations is found numerically. Both the linear and non-linear solutions show that the axial depth at which the liquid is affected by the motion of the cylinder scales like $\sqrt{t}$. The non-linear solution presents the peculiar feature that there exists a maximum driving velocity $U^\star$ above which the solution disappears, a phenomenon probably related to the de-pinning of the contact line observed in experiments for large pulling velocities.

physics.flu-dyn↗

arXiv2013

Two dimensional Leidenfrost Droplets in a Hele Shaw Cell

We experimentally and theoretically investigate the behavior of Leidenfrost droplets inserted in a Hele-Shaw cell. As a result of the confinement from the two surfaces, the droplet has the shape of a flattened disc and is thermally isolated from the surface by the two evaporating vapor layers. An analysis of the evaporation rate using simple scaling arguments is in agreement with the experimental results. Using the lubrication approximation we numerically determine the shape of the droplets as a function of its radius. We furthermore find that the droplet width tends to zero at its center when the radius reaches a critical value. This prediction is corroborated experimentally by the direct observation of the sudden transition from a flattened disc into an expending torus. Below this critical size, the droplets are also displaying capillary azimuthal oscillating modes reminiscent of a hydrodynamic instability.

physics.flu-dyn↗

arXiv2013

A general method to remove the stiffness of PDEs

A new method to remove the stiffness of partial differential equations is presented. Two terms are added to the right-hand-side of the PDE : the first is a damping term and is treated implicitly, the second is of the opposite sign and is treated explicitly. A criterion for absolute stability is found and the scheme is shown to be convergent. The method is applied with success to the mean curvature flow equation, the Kuramoto-Sivashinsky equation, and to the Rayleigh-Taylor instability in a Hele-Shaw cell, including the effect of surface tension.

physics.comp-ph↗

arXiv2012

Rarefied gas correction for the bubble entrapment singularity in drop impacts

We study the non-continuous correction in the dynamics of drop impact on a solid substrate. Close to impact, a thin film of gas is formed beneath the drop so that the local Knudsen number is of order one. We consider the first correction to the dynamics which consists of allowing slip of the gas along the substrate and the interface. We focus on the singular dynamics of entrapment that can be seen when surface tension and liquid viscosity can be neglected. There we show that different dynamical regimes are present that tend to lower the singularity strength. We finally suggest how these effects might be connected to the influence of the gas pressure in the impact dynamics observed in recent experiments.

physics.flu-dyn↗

arXiv2011

Curvature singularity and film-skating during drop impact

We study the influence of the surrounding gas in the dynamics of drop impact on a smooth surface. We use an axisymmetric 3D model for which both the gas and the liquid are incompressible; lubrication regime applies for the gas film dynamics and the liquid viscosity is neglected. In the absence of surface tension a finite time singularity whose properties are analysed is formed and the liquid touches the solid on a circle. When surface tension is taken into account, a thin jet emerges from the zone of impact, skating above a thin gas layer. The thickness of the air film underneath this jet is always smaller than the mean free path in the gas suggesting that the liquid film eventually wets the surface. We finally suggest an aerodynamical instability mechanism for the splash.

physics.flu-dyn↗

arXiv2004

Asymptotic behaviour of the Rayleigh--Taylor instability

We investigate long time numerical simulations of the inviscid Rayleigh-Taylor instability at Atwood number one using a boundary integral method. We are able to attain the asymptotic behavior for the spikes predicted by Clavin & Williams\cite{clavin} for which we give a simplified demonstration. In particular we observe that the spike's curvature evolves like $t^3$ while the overshoot in acceleration shows a good agreement with the suggested $1/t^5$ law. Moreover, we obtain consistent results for the prefactor coefficients of the asymptotic laws. Eventually we exhibit the self-similar behavior of the interface profile near the spike.

physics.flu-dyn↗