Searcharxiv⌕ Search

arXiv subjects

Laurent Gizon

Publications and source records attributed to Laurent Gizon.

125 records · Page 7Linked to original sources

The radial gradient of the near-surface shear layer of the Sun

Helioseismology has provided unprecedented information about the internal rotation of the Sun. One of the important achievements was the discovery of two radial shear layers: one near the bottom of the convection zone (the tachocline) and one near the surface. These shear layers may be important ingredients for explaining the magnetic cycle of the Sun. We measure the logarithmic radial gradient of the rotation rate ($\rm d\lnΩ/\rm d\ln r$) near the surface of the Sun using 15 years of f mode rotational frequency splittings from the Michelson Doppler Imager (MDI) and four years of data from the Helioseismic and Magnetic Imager (HMI). We model the angular velocity of the Sun in the upper $\sim 10$ Mm as changing linearly with depth and use a multiplicative optimally localized averaging inversion to infer the gradient of the rotation rate as a function of latitude. Both the MDI and HMI data show that $\rm d\lnΩ/\rm d\ln r$ is close to $-1$ from the equator to 60$^{\circ}$ latitude and stays negative up to 75$^{\circ}$ latitude. However, the value of the gradient is different for MDI and HMI for latitudes above $60^{\circ}$. Additionally, there is a significant difference between the value of $d\lnΩ/d\ln r$ using an older and recently reprocessed MDI data for latitudes above $30^\circ$. We could reliably infer the value of $\rm d\lnΩ/\rm d\ln r$ up to 60$^{\circ}$, but not above this latitude, which will hopefully constrain theories of the near-surface shear layer and dynamo. Furthermore, the recently reprocessed MDI splitting data are more reliable than the older versions which contained clear systematic errors in the high degree f modes.

astro-ph.SR↗

Helioseismology with Solar Orbiter

The Solar Orbiter mission, to be launched in July 2017, will carry a suite of remote sensing and in-situ instruments, including the Polarimetric and Helioseismic Imager (PHI). PHI will deliver high-cadence images of the Sun in intensity and Doppler velocity suitable for carrying out novel helioseismic studies. The orbit of the Solar Orbiter spacecraft will reach a solar latitude of up to 21 deg (up to 34 deg by the end of the extended mission) and thus will enable the first local helioseismology studies of the polar regions. Here we consider an array of science objectives to be addressed by helioseismology within the baseline telemetry allocation (51 Gbit per orbit, current baseline) and within the science observing windows (baseline 3 x 10 days per orbit). A particularly important objective is the measurement of large-scale flows at high latitudes (rotation and meridional flow), which are largely unknown but play an important role in flux transport dynamos. The full range of Earth-Sun-spacecraft angles provided by the orbit will enable helioseismology from two vantage points by combining PHI with another instrument: stereoscopic helioseismology will allow the study of the deep solar interior and a better understanding of the physics of solar oscillations in both quiet Sun and sunspots. We have used a model of the PHI instrument to study its performance for helioseismology applications. As input we used a 6 hr time-series of realistic solar magneto-convection simulation (Stagger code) and the SPINOR radiative transfer code to synthesize the observables. The simulated power spectra of solar oscillations show that the instrument is suitable for helioseismology. In particular, the specified point spread function, image jitter, and photon noise are no obstacle to a successful mission.

astro-ph.SR↗

Generalization of the noise model for time-distance helioseismology

In time-distance helioseismology, information about the solar interior is encoded in measurements of travel times between pairs of points on the solar surface. Travel times are deduced from the cross-covariance of the random wave field. Here we consider travel times and also products of travel times as observables. They contain information about e.g. the statistical properties of convection in the Sun. The basic assumption of the model is that noise is the result of the stochastic excitation of solar waves, a random process which is stationary and Gaussian. We generalize the existing noise model (Gizon and Birch 2004) by dropping the assumption of horizontal spatial homogeneity. Using a recurrence relation, we calculate the noise covariance matrices for the moments of order 4, 6, and 8 of the observed wave field, for the moments of order 2, 3 and 4 of the cross-covariance, and for the moments of order 2, 3 and 4 of the travel times. All noise covariance matrices depend only on the expectation value of the cross-covariance of the observed wave field. For products of travel times, the noise covariance matrix consists of three terms proportional to $1/T$, $1/T^2$, and $1/T^3$, where $T$ is the duration of the observations. For typical observation times of a few hours, the term proportional to $1/T^2$ dominates and $Cov[τ_1 τ_2, τ_3 τ_4] \approx Cov[τ_1, τ_3] Cov[τ_2, τ_4] + Cov[τ_1, τ_4] Cov[τ_2, τ_3]$, where the $τ_i$ are arbitrary travel times. This result is confirmed for $p_1$ travel times by Monte Carlo simulations and comparisons with SDO/HMI observations. General and accurate formulae have been derived to model the noise covariance matrix of helioseismic travel times and products of travel times. These results could easily be generalized to other methods of local helioseismology, such as helioseismic holography and ring diagram analysis.

astro-ph.SR↗

Interpreting the Helioseismic and Magnetic Imager (HMI) Multi-Height Velocity Measurements

The Solar Dynamics Observatory/Helioseismic and Magnetic Imager (SDO/HMI) filtergrams, taken at six wavelengths around the Fe I 6173.3 Å line, contain information about the line-of-sight velocity over a range of heights in the solar atmosphere. Multi-height velocity inferences from these observations can be exploited to study wave motions and energy transport in the atmosphere. Using realistic convection simulation datasets provided by the STAGGER and MURaM codes, we generate synthetic filtergrams and explore several methods for estimating Dopplergrams. We investigate at which height each synthetic Dopplergram correlates most strongly with the vertical velocity in the model atmospheres. On the basis of the investigation, we propose two Dopplergrams other than the standard HMI-algorithm Dopplergram produced from HMI filtergrams: a line-center Dopplergram and an average-wing Dopplergram. These two Dopplergrams correlate most strongly with vertical velocities at the heights of 30 - 40 km above (line-center) and 30 - 40 km below (average-wing) the effective height of the HMI-algorithm Dopplergram. Therefore, we can obtain velocity information from two layers separated by about a half of a scale height in the atmosphere, at best. The phase shifts between these multi-height Dopplergrams from observational data as well as those from the simulated data are also consistent with the height-difference estimates in the frequency range above the photospheric acoustic cutoff frequency.

astro-ph.SR↗

Helioseismic and Magnetic Imager Multi-height Dopplergrams

We study Doppler velocity measurements at multiple heights in the solar atmosphere using a set of six filtergrams obtained by the Helioseismic magnetic Imager on board the Solar Dynamics Observatory. There are clear and significant phase differences between core and wing Dopplergrams in the frequency range above the photospheric acoustic cutoff frequency, which indicates that these are really "multi-height" datasets.

astro-ph.SR↗

Propagating Linear Waves in Convectively Unstable Stellar Models: a Perturbative Approach

Linear time-domain simulations of acoustic oscillations are unstable in the stellar convection zone. To overcome this problem it is customary to compute the oscillations of a stabilized background stellar model. The stabilization, however, affects the result. Here we propose to use a perturbative approach (running the simulation twice) to approximately recover the acoustic wave field, while preserving seismic reciprocity. To test the method we considered a 1D standard solar model. We found that the mode frequencies of the (unstable) standard solar model are well approximated by the perturbative approach within $1~μ$Hz for low-degree modes with frequencies near $3~μ$Hz. We also show that the perturbative approach is appropriate for correcting rotational-frequency kernels. Finally, we comment that the method can be generalized to wave propagation in 3D magnetized stellar interiors because the magnetic fields have stabilizing effects on convection.

astro-ph.SR↗

Precise and accurate interpolated stellar oscillation frequencies on the main sequence

High-quality data from space-based observatories present an opportunity to fit stellar models to observations of individually-identified oscillation frequencies, not just the large and small frequency separations. But such fits require the evaluation of a large number of accurate stellar models, which remains expensive. Here, we show that global-mode oscillation frequencies interpolated in a grid of stellar models are precise and accurate, at least in the neighbourhood of a solar model.

astro-ph.SR↗

Seismic constraints on rotation of Sun-like star and mass of exoplanet

Rotation is thought to drive cyclic magnetic activity in the Sun and Sun-like stars. Stellar dynamos, however, are poorly understood owing to the scarcity of observations of rotation and magnetic fields in stars. Here, inferences are drawn on the internal rotation of a distant Sun-like star by studying its global modes of oscillation. We report asteroseismic constraints imposed on the rotation rate and the inclination of the spin axis of the Sun-like star HD 52265, a principal target observed by the CoRoT satellite that is known to host a planetary companion. These seismic inferences are remarkably consistent with an independent spectroscopic observation (rotational line broadening) and with the observed rotation period of star spots. Furthermore, asteroseismology constrains the mass of exoplanet HD 52265b. Under the standard assumption that the stellar spin axis and the axis of the planetary orbit coincide, the minimum spectroscopic mass of the planet can be converted into a true mass of 1.85 (+0.52,-0.42) M_Jupiter, which implies that it is a planet, not a brown dwarf.

astro-ph.SR↗

Propagation of seismic waves through a spatio-temporally fluctuating medium: Homogenization

Measurements of seismic wave travel times at the photosphere of the Sun have enabled inferences of its interior structure and dynamics. In interpreting these measurements, the simplifying assumption that waves propagate through a temporally stationary medium is almost universally invoked. However, the Sun is in a constant state of evolution, on a broad range of spatio-temporal scales. At the zero wavelength limit, i.e., when the wavelength is much shorter than the scale over which the medium varies, the WKBJ (ray) approximation may be applied. Here, we address the other asymptotic end of the spectrum, the infinite wavelength limit, using the technique of homogenization. We apply homogenization to scenarios where waves are propagating through rapidly varying media (spatially and temporally), and derive effective models for the media. One consequence is that a scalar sound speed becomes a tensorial wavespeed in the effective model and anisotropies can be induced depending on the nature of the perturbation. The second term in this asymptotic two-scale expansion, the so-called corrector, contains contributions due to higher-order scattering, leading to the decoherence of the wavefield. This decoherence may be causally linked to the observed wave attenuation in the Sun. Although the examples we consider here consist of periodic arrays of perturbations to the background, homogenization may be extended to ergodic and stationary random media. This method may have broad implications for the manner in which we interpret seismic measurements in the Sun and for modeling the effects of granulation on the scattering of waves and distortion of normal-mode eigenfunctions.

astro-ph.EP↗

Helioseismology of sunspots: how sensitive are travel times to the Wilson depression and to the subsurface magnetic field?

In order to assess the ability of helioseismology to probe the subsurface structure and magnetic field of sunspots, we need to determine how helioseismic travel times depend on perturbations to sunspot models. Here we numerically simulate the propagation of f, p1, and p2 wave packets through magnetic sunspot models. Among the models we considered, a ~50 km change in the height of the Wilson depression and a change in the subsurface magnetic field geometry can both be detected above the observational noise level. We also find that the travel-time shifts due to changes in a sunspot model must be modeled by computing the effects of changing the reference sunspot model, and not by computing the effects of changing the subsurface structure in the quiet-Sun model. For p1 modes the latter is wrong by a factor of four. In conclusion, numerical modeling of MHD wave propagation is an essential tool for the interpretation of the effects of sunspots on seismic waveforms.

astro-ph.SR↗

Helioseismology challenges models of solar convection

Convection is the mechanism by which energy is transported through the outermost 30% of the Sun. Solar turbulent convection is notoriously difficult to model across the entire convection zone where the density spans many orders of magnitude. In this issue of PNAS, Hanasoge et al. (2012) employ recent helioseismic observations to derive stringent empirical constraints on the amplitude of large-scale convective velocities in the solar interior. They report an upper limit that is far smaller than predicted by a popular hydrodynamic numerical simulation.

astro-ph.SR↗

Seismic probes of solar interior magnetic structure

Sunspots are prominent manifestations of solar magnetoconvection and imaging their subsurface structure is an outstanding problem of wide physical importance. Travel times of seismic waves that propagate through these structures are typically used as inputs to inversions. Despite the presence of strongly anisotropic magnetic waveguides, these measurements have always been interpreted in terms of changes to isotropic wavespeeds and flow-advection related Doppler shifts. Here, we employ PDE-constrained optimization to determine the appropriate parameterization of the structural properties of the magnetic interior. Seven different wavespeeds fully characterize helioseismic wave propagation: the isotropic sound speed, a Doppler-shifting flow-advection velocity and an anisotropic magnetic velocity. The structure of magnetic media is sensed by magnetoacoustic slow and fast modes and Alfvén waves, each of which propagates at a different wavespeed. We show that even in the case of weak magnetic fields, significant errors may be incurred if these anisotropies are not accounted for in inversions. Translation invariance is demonstrably lost. These developments render plausible the accurate seismic imaging of magnetoconvection in the Sun.

astro-ph.SR↗

Constructing and Characterising Solar Structure Models for Computational Helioseismology

In this paper, we construct background solar models that are stable against convection, by modifying the vertical pressure gradient of Model S (Christensen-Dalsgaard et al., 1996, Science, 272, 1286) relinquishing hydrostatic equilibrium. However, the stabilisation affects the eigenmodes that we wish to remain as close to Model S as possible. In a bid to recover the Model S eigenmodes, we choose to make additional corrections to the sound speed of Model S before stabilisation. No stabilised model can be perfectly solar-like, so we present three stabilised models with slightly different eigenmodes. The models are appropriate to study the f and p1 to p4 modes with spherical harmonic degrees in the range from 400 to 900. Background model CSM has a modified pressure gradient for stabilisation and has eigenfrequencies within 2% of Model S. Model CSM_A has an additional 10% increase in sound speed in the top 1 Mm resulting in eigenfrequencies within 2% of Model S and eigenfunctions that are, in comparison with CSM, closest to those of Model S. Model CSM_B has a 3% decrease in sound speed in the top 5 Mm resulting in eigenfrequencies within 1% of Model S and eigenfunctions that are only marginally adversely affected. These models are useful to study the interaction of solar waves with embedded three-dimensional heterogeneities, such as convective flows and model sunspots. We have also calculated the response of the stabilised models to excitation by random near-surface sources, using simulations of the propagation of linear waves. We find that the simulated power spectra of wave motion are in good agreement with an observed SOHO/MDI power spectrum. Overall, our convectively stabilised background models provide a good basis for quantitative numerical local helioseismology. The models are available for download from http://www.mps.mpg.de/projects/seismo/NA4/.

astro-ph.SR↗

The Adjoint Method Applied to Time-Distance Helioseismology

For a given {\it misfit function}, a specified optimality measure of a model, its gradient describes the manner in which one may alter properties of the system to march towards a stationary point. The adjoint method, arising from partial-differential-equation-constrained optimization, describes a means of extracting derivatives of a misfit function with respect to model parameters through finite computation. It relies on the accurate calculation of wavefields that are driven by two types of sources, namely the average wave-excitation spectrum, resulting in the {\it forward wavefield}, and differences between predictions and observations, resulting in an {\it adjoint wavefield}. All sensitivity kernels relevant to a given measurement emerge directly from the evaluation of an interaction integral involving these wavefields. The technique facilitates computation of sensitivity kernels (Fréchet derivatives) relative to three-dimensional heterogeneous background models, thereby paving the way for non-linear iterative inversions. An algorithm to perform such inversions using as many observations as desired is discussed.

astro-ph.SR↗

Astrodynamical Space Test of Relativity using Optical Devices I (ASTROD I) - A class-M fundamental physics mission proposal for Cosmic Vision 2015-2025

ASTROD I is a planned interplanetary space mission with multiple goals. The primary aims are: to test General Relativity with an improvement in sensitivity of over 3 orders of magnitude, improving our understanding of gravity and aiding the development of a new quantum gravity theory; to measure key solar system parameters with increased accuracy, advancing solar physics and our knowledge of the solar system and to measure the time rate of change of the gravitational constant with an order of magnitude improvement and the anomalous Pioneer acceleration, thereby probing dark matter and dark energy gravitationally. It is an international project, with major contributions from Europe and China and is envisaged as the first in a series of ASTROD missions. ASTROD I will consist of one spacecraft carrying a telescope, four lasers, two event timers and a clock. Two-way, two-wavelength laser pulse ranging will be used between the spacecraft in a solar orbit and deep space laser stations on Earth, to achieve the ASTROD I goals. A second mission, ASTROD II is envisaged as a three-spacecraft mission which would test General Relativity to one part per billion, enable detection of solar g-modes, measure the solar Lense-Thirring effect to 10 parts per million, and probe gravitational waves at frequencies below the LISA bandwidth. In the third phase (ASTROD III or Super-ASTROD), larger orbits could be implemented to map the outer solar system and to probe primordial gravitational-waves at frequencies below the ASTROD II bandwidth.

astro-ph↗

HELAS Local Helioseismology Activities

The main goals of the HELAS local helioseismology network activity are to consolidate this field of research in Europe, to organise scientific workshops, and to facilitate the distribution of observations and data analysis software. Most of this is currently accomplished via a dedicated website at http://www.mps.mpg.de/projects/seismo/NA4/ . In this paper we list the outreach material, observational data, analysis tools and modelling tools currently available from the website and describe the focus of the scientific workshops and their proceedings.

astro-ph↗

Fourier Analysis of Gapped Time Series: Improved Estimates of Solar and Stellar Oscillation Parameters

Quantitative helio- and asteroseismology require very precise measurements of the frequencies, amplitudes, and lifetimes of the global modes of stellar oscillation. It is common knowledge that the precision of these measurements depends on the total length (T), quality, and completeness of the observations. Except in a few simple cases, the effect of gaps in the data on measurement precision is poorly understood, in particular in Fourier space where the convolution of the observable with the observation window introduces correlations between different frequencies. Here we describe and implement a rather general method to retrieve maximum likelihood estimates of the oscillation parameters, taking into account the proper statistics of the observations. Our fitting method applies in complex Fourier space and exploits the phase information. We consider both solar-like stochastic oscillations and long-lived harmonic oscillations, plus random noise. Using numerical simulations, we demonstrate the existence of cases for which our improved fitting method is less biased and has a greater precision than when the frequency correlations are ignored. This is especially true of low signal-to-noise solar-like oscillations. For example, we discuss a case where the precision on the mode frequency estimate is increased by a factor of five, for a duty cycle of 15%. In the case of long-lived sinusoidal oscillations, a proper treatment of the frequency correlations does not provide any significant improvement; nevertheless we confirm that the mode frequency can be measured from gapped data at a much better precision than the 1/T Rayleigh resolution.

astro-ph↗