arXiv subjects

Laurent Jocou

Publications and source records attributed to Laurent Jocou.

18 recordsLinked to original sources

arXiv2026

HARMONI at ELT: Reoptimization of the NGSS natural guide star sensors system for MCAO compatibility

HARMONI is the first-light, adaptive optics assisted, near-IR integral field spectrograph for the ELT. It covers a spectral range from below 800nm to 2400nm with resolving powers from 3000 to 7000 and spatial sampling of 25mas and 6mas. It can operate in three adaptive optics (AO) modes: single conjugate AO (SCAO), high-contrast AO (HCAO), and multi-conjugate AO (MCAO). The project is resuming its final design phase after a rescope design phase that has lasted two years. This paper describes the impact of the rescope on the natural guide star sensors (NGSS) system, imposing wide-ranging changes in particular to the low-order wavefront sensors (LOWFS) previously optimized for LTAO operation as well as on the external support and enclosure (ESE) whose external interfaces have changed. The high-contrast module (HCM) is also deeply affected due to the modified plate scale of the instrument, and the single-conjugate AO sensor (SCAOS) benefits from a reduced patrol field requirement. Description of the changes will be given together with the associated system analysis involving requirements flow-down, revisited functional analysis, and updated product breakdown structure. Elements of the new system management structure and work breakdown will also be included.

astro-ph.IM↗

arXiv2026

MORFEO: Advancing Towards Final Design

The Multiconjugate adaptive Optics Relay For ELT Observations (MORFEO) is a first-generation adaptive optics module for the Extremely Large Telescope (ELT), designed to deliver a diffraction-limited, highly uniform 53x53 arcsec field of view to the MICADO near-infrared camera. As the project advances toward its Final Design Review (FDR), significant consolidations have been achieved across all subsystems. This paper presents an updated overview of the MORFEO system, highlighting its dual operational modes (MCAO and SCAO) and recent developments in its opto-mechanical architecture. We dedicate specific focus to the core adaptive hardware, detailing the fifth-generation post-focal deformable mirrors, the highly complex Laser Guide Star (LGS) objective zoom system required to track sodium layer variations, and the Natural Guide Star (NGS) low-order and reference sensing strategies. Furthermore, we detail the advanced pseudo-open-loop control strategy managed by a split Hard and Soft Real-Time Computer architecture. Finally, we report the latest end-to-end performance estimations obtained via the SPECULA simulation framework, demonstrating compliance with the stringent Strehl Ratio and sky coverage requirements under median atmospheric conditions.

astro-ph.IM↗

arXiv2024

Improving constraints on the extended mass distribution in the Galactic Center with stellar orbits

Studying the orbital motion of stars around Sagittarius A* in the Galactic Center provides a unique opportunity to probe the gravitational potential near the supermassive black hole at the heart of our Galaxy. Interferometric data obtained with the GRAVITY instrument at the Very Large Telescope Interferometer (VLTI) since 2016 has allowed us to achieve unprecedented precision in tracking the orbits of these stars. GRAVITY data have been key to detecting the in-plane, prograde Schwarzschild precession of the orbit of the star S2, as predicted by General Relativity. By combining astrometric and spectroscopic data from multiple stars, including S2, S29, S38, and S55 - for which we have data around their time of pericenter passage with GRAVITY - we can now strengthen the significance of this detection to an approximately $10 σ$ confidence level. The prograde precession of S2's orbit provides valuable insights into the potential presence of an extended mass distribution surrounding Sagittarius A*, which could consist of a dynamically relaxed stellar cusp comprised of old stars and stellar remnants, along with a possible dark matter spike. Our analysis, based on two plausible density profiles - a power-law and a Plummer profile - constrains the enclosed mass within the orbit of S2 to be consistent with zero, establishing an upper limit of approximately $1200 \, M_\odot$ with a $1 σ$ confidence level. This significantly improves our constraints on the mass distribution in the Galactic Center. Our upper limit is very close to the expected value from numerical simulations for a stellar cusp in the Galactic Center, leaving little room for a significant enhancement of dark matter density near Sagittarius A*.

astro-ph.GA↗

arXiv2024

Recent and Upcoming Upgrades for MIRC-X and MYSTIC on the CHARA Array

MIRC-X and MYSTIC are six-telescope near-infrared beam (1.08-2.38 $μ$m) combiners at the CHARA Array on Mt Wilson CA, USA. Ever since the commissioning of MIRC-X (J and H bands) in 2018 and MYSTIC (K bands) in 2021, they have been the most popular and over-subscribed instruments at the array. Observers have been able to image stellar objects with sensitivity down to 8.1 mag in H and 7.8 mag in K-band under the very best conditions. In 2022 MYSTIC was upgraded with a new ABCD mode using the VLTI/GRAVITY 4-beam integrated optics chip, with the goal of improving the sensitivity and calibration. The ABCD mode has been used to observe more than 20 T Tauri stars; however, the data pipeline is still being developed. Alongside software upgrades, we detail planned upgrades to both instruments in this paper. The main upgrades are: 1) Adding a motorized filter wheel to MIRC-X along with new high spectral resolution modes 2) Updating MIRC-X optics to allow for simultaneous 6T J+H observations 3) Removing the warm window between the spectrograph and the warm optics in MYSTIC 4) Adding a 6T ABCD mode to MIRC-X in collaboration with CHARA/SPICA 5) Updating the MIRC-X CRED-ONE camera funded by Prof. Kraus from U. Exeter 6) Carrying out science verification of the MIRC-X polarization mode 7) Developing new software for ABCD-mode data reduction and more efficient calibration routines. We expect these upgrades to not only improve the observing experience, but also increase the sensitivity by 0.4 mag in J+H-bands, and 1 mag in K-band.

astro-ph.IM↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2023

On-sky demonstration at Palomar Observatory of the near-IR, high-resolution VIPA spectrometer

A near-IR high-resolution, R=80000 spectrometer has been developed at IPAG to directly characterize the atmosphere of exoplanets using adaptive optics (AO) assisted telescopes, and a single-mode fiber-injection unit. A first technical test with the 200' Hale telescope at Palomar Observatory occurred in March 2022 using the PALM3000 AO system offered by this telescope. Observations have also been made at the same time with the PARVI spectrometer so that a direct comparison can be made between the two instruments. This spectrometer uses a virtually imaged phased array (VIPA) instead of an echelle grating, resulting in a very compact optical layout that fits in a 0.25m3 cryostat. Using a quarter of an H2RG detector, the spectrometer analyses the middle part of the H-band, from 1.57 to 1.7 microns for 2 sources whose light is transferred from the telescope to the spectrometer using single-mode fibers. By design, the transmission of the spectrometer is expected to be 40-50%, which is 2-3 times higher than the transmission of current high-resolution spectrometers such as CRIRES+ and NIRSPEC. A damaged cross-disperser limited it to 21%, however. A replacement grating with a correct, twice as high efficiency has been procured after the on-sky demonstration. In addition to recalling the main specifications of the VIPA spectrometer, this paper presents the control software, the calibration process, and the reduction pipeline that have been developed for the instrument. It also presents the results of the on-sky technical test with the Hale telescope, as well as measurements of the effective resolution and transmission, along with a comparison of a spectrum of the sun obtained with the spectrometer with the BASS2000 reference spectrum. Planned modifications are also discussed. That includes the integration of a new dedicated H2RG detector, and of K-band optics.

astro-ph.IM↗

arXiv2023

The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI

The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.

astro-ph.IM↗

arXiv2022

HARMONI at ELT: A Zernike wavefront sensor for the high-contrast module -- Testbed results with realistic observation conditions

ELT-HARMONI is the first light visible and near-IR integral field spectrograph (IFS) for the ELT. It covers a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes - SCAO (including a High Contrast capability) and LTAO - or with NOAO. The project is preparing for Final Design Reviews. The High Contrast Module (HCM) will allow HARMONI to perform direct imaging and spectral analysis of exoplanets up to one million times fainter than their host star. Quasi-static aberrations are a limiting factor and must be calibrated as close as possible to the focal plane masks to reach the specified contrast. A Zernike sensor for Extremely Low-level Differential Aberrations (ZELDA) will be used in real-time and closed-loop operation at 0.1Hz frequency for this purpose. Unlike a Shack-Hartmann, the ZELDA wavefront sensor is sensitive to Island and low-wind effects. The ZELDA sensor has already been tested on VLT-SPHERE and will be used in other instruments. Our objective is to adapt this sensor to the specific case of HARMONI. A ZELDA prototype is being both simulated and experimentally tested at IPAG. Its nanometric precision has first been checked in 2020 in the case of slowly evolving, small wavefront errors, and without dispersion nor turbulence residuals. On this experimental basis, we address the performance of the sensor under realistic operational conditions including residuals, mis-centring, dispersion, sensitivity, etc. Atmospheric refraction residuals were introduced by the use of a prism, and turbulence was introduced by a spatial light modulator which is also used to minimise wavefront residuals in a closed loop in the observing conditions expected with HARMONI.

astro-ph.IM↗

arXiv2022

Coronagraphy for DiRect Imaging of Exoplanets (CIDRE) testbed 1: concept, optical set up, and experimental results of adaptive amplitude apodization

Oncoming exoplanet spectro-imagers like the Planetary Camera and Spectrograph (PCS) for the Extremely Large Telescope (ELT) will aim for a new class of exoplanets, including Earth-like planets evolving around M dwarfs i.e., closer than 0.1'' with contrasts around 10^-8. This can be achieved with coronagraphs to modulate the wavefront. Classical coronagraphs are not optimal: 1) they impose a planetary photon loss, which is particularly problematic when the instrument includes a high spectral-resolution spectrograph, 2) some aberrations such as the missing segments of the ELT are dynamic and not compatible with a static coronagraph design, 3) the coupling of the exoplanet image with a fiber for spectroscopy only requires the electric field to be controlled on a small region of the detector. Such instruments would benefit from an adaptive tool to modulate the wavefront in both amplitude and phase. We propose to combine in the pupil plane a deformable mirror (DM) to control the phase and a digital micro-mirror device (DMD) i.e., an array made of 1920*1080 micro-mirrors able to switch between two positions, to control its amplitude. If the DM is already well-known in the field in particular for adaptive optics applications, the DMD has so far not been fully considered. At IPAG, we are currently assembling a testbed called CIDRE (Coronagraphy for DiRect Imaging of Exoplanets) to develop, test, calibrate, and validate the combination of these two components with a Lyot coronagraph. Since March 2022, CIDRE is assembled albeit without the Lyot coronagraph yet. The first few months have been dedicated to the calibration of the DMD. Since May 2022, it is operational and used to test dynamic amplitude apodization coronagraphs (so-called Shaped Pupils). This proceeding presents the set up of the CIDRE testbench and the first experimental results on adaptive Shaped Pupils obtained with the DMD.

astro-ph.IM↗

arXiv2018

Experimental test of a 40 cm-long R=100 000 spectrometer for exoplanet characterisation

High-resolution spectroscopy is a key element for present and future astronomical instrumentation. In particular, coupled to high contrast imagers and coronagraphs, high spectral resolution enables higher contrast and has been identified as a very powerful combination to characterise exoplanets, starting from giant planets now, up to Earth-like planet eventually for the future instruments. In this context, we propose the implementation of an innovative echelle spectrometer based on the use of VIPA (Virtually Imaged Phased Array, Shirasaki 1996). The VIPA itself is a particular kind of Fabry-Perot interferometer, used as an angular disperser with much greater dispersive power than common diffraction grating. The VIPA is an efficient, small component (3 cm x 2.4 cm), that takes the very advantage of single mode injection in a versatile design. The overall instrument presented here is a proof-of-concept of a compact, high-resolution (R > 80 000) spectrometer, dedicated to the H and K bands, in the context of the project High-Dispersion Coronagrahy developed at IPAG. The optical bench has a foot-print of 40 cm x 26 cm ; it is fed by two Single-Mode Fibers (SMF), one dedicated to the companion, and one to the star and/or to a calibration channel, and is cooled down to 80 K. This communication first presents the scientific and instrumental context of the project, and the principal merit of single-mode operations in high-resolution spectrometry. After recalling the physical structure of the VIPA and its implementation in an echelle-spectrometer design, it then details the optical design of the spectrometer. In conclusion, further steps (integration, calibration, coupling with adaptive optics) and possible optimization are briefly presented. Keywords: Echelle Spectrometer, High Spectral Resolution, Exoplanets, High-Dispersion Coronography, Infrared, Adaptive Optics, SPHERE

astro-ph.IM↗

arXiv2018

Multiple Star Systems in the Orion Nebula

This work presents an interferometric study of the massive-binary fraction in the Orion Trapezium Cluster with the recently comissioned GRAVITY instrument. We observe a total of 16 stars of mainly OB spectral type. We find three previously unknown companions for $θ^1$ Ori B, $θ^2$ Ori B, and $θ^2$ Ori C. We determine a separation for the previously suspected companion of NU Ori. We confirm four companions for $θ^1$ Ori A, $θ^1$ Ori C, $θ^1$ Ori D, and $θ^2$ Ori A, all with substantially improved astrometry and photometric mass estimates. We refine the orbit of the eccentric high-mass binary $θ^1$ Ori C and we are able to derive a new orbit for $θ^1$ Ori D. We find a system mass of 21.7 $M_{\odot}$ and a period of $53$ days. Together with other previously detected companions seen in spectroscopy or direct imaging, eleven of the 16 high-mass stars are multiple systems. We obtain a total number of 22 companions with separations up to 600 AU. The companion fraction of the early B and O stars in our sample is about 2, significantly higher than in earlier studies of mostly OB associations. The separation distribution hints towards a bimodality. Such a bimodality has been previously found in A stars, but rarely in OB binaries, which up to this point have been assumed to be mostly compact with a tail of wider companions. We also do not find a substantial population of equal-mass binaries. The observed distribution of mass ratios declines steeply with mass, and like the direct star counts, indicates that our companions follow a standard power law initial mass function. Again, this is in contrast to earlier findings of flat mass ratio distributions in OB associations. We exclude collision as a dominant formation mechanism but find no clear preference for core accretion or competitive accretion.

astro-ph.SR↗

arXiv2018

MYSTIC: Michigan Young STar Imager at CHARA

We present the design for MYSTIC, the Michigan Young STar Imager at CHARA. MYSTIC will be a K-band, cryogenic, 6-beam combiner for the Georgia State University CHARA telescope array. The design follows the image-plane combination scheme of the MIRC instrument where single-mode fibers bring starlight into a non-redundant fringe pattern to feed a spectrograph. Beams will be injected in polarization-maintaining fibers outside the cryogenic dewar and then be transported through a vacuum feedthrough into the ~220K cold volume where combination is achieved and the light is dispersed. We will use a C-RED One camera (First Light Imaging) based on the eAPD SAPHIRA detector to allow for near-photon-counting performance. We also intend to support a 4-telescope mode using a leftover integrated optics component designed for the VLTI-GRAVITY experiment, allowing better sensitivity for the faintest targets. Our primary science driver motivation is to image disks around young stars in order to better understand planet formation and how forming planets might influence disk structures.

astro-ph.IM↗

arXiv2018

Characterisation of ALPAO deformable mirrors for the NAOMI VLTI Auxiliary Telescopes Adaptive Optics

The Very Large Telescope Interferometer Auxiliary Telescopes will soon be equipped with an adaptive optics system called NAOMI. The corrective optics deformable mirror is the commercial DM241 from ALPAO. Being part of an interferometer operating from visible to mid-infrared, the DMs of NAOMI face several challenges (high level of reliability, open-loop chopping, piston-free control, WFS/DM pupil rotation, high desired bandwidth and stroke). We here describe our extensive characterization of the DMs through measurements and simulations. We summarize the operational scenario we have defined to handle the specific mirror properties. We conclude that the ALPAO DMs have overall excellent properties that fulfill most of the stringent requirements and that deviations from specifications are easily handled. To our knowledge, NAOMI will be the first astronomical system with a command in true Zernike modes (allowing software rotation), and the first astronomical system in which a chopping is performed with the deformable mirror (5'' sky, at 5~Hz).

astro-ph.IM↗

arXiv2011

Searching for faint companions with VLTI/PIONIER. I. Method and first results

Context. A new four-telescope interferometric instrument called PIONIER has recently been installed at VLTI. It provides improved imaging capabilities together with high precision. Aims. We search for low-mass companions around a few bright stars using different strategies, and determine the dynamic range currently reachable with PIONIER. Methods. Our method is based on the closure phase, which is the most robust interferometric quantity when searching for faint companions. We computed the chi^2 goodness of fit for a series of binary star models at different positions and with various flux ratios. The resulting chi^2 cube was used to identify the best-fit binary model and evaluate its significance, or to determine upper limits on the companion flux in case of non detections. Results. No companion is found around Fomalhaut, tau Cet and Regulus. The median upper limits at 3 sigma on the companion flux ratio are respectively of 2.3e-3 (in 4 h), 3.5e-3 (in 3 h) and 5.4e-3 (in 1.5 h) on the search region extending from 5 to 100 mas. Our observations confirm that the previously detected near-infrared excess emissions around Fomalhaut and tau Cet are not related to a low-mass companion, and instead come from an extended source such as an exozodiacal disk. In the case of del Aqr, in 30 min of observation, we obtain the first direct detection of a previously known companion, at an angular distance of about 40 mas and with a flux ratio of 2.05e-2 \pm 0.16e-2. Due to the limited u,v plane coverage, its position can, however, not be unambiguously determined. Conclusions. After only a few months of operation, PIONIER has already achieved one of the best dynamic ranges world-wide for multi-aperture interferometers. A dynamic range up to about 1:500 is demonstrated, but significant improvements are still required to reach the ultimate goal of directly detecting hot giant extrasolar planets.

astro-ph.EP↗

arXiv2010

The Planar Optics Phase Sensor: a study for the VLTI 2nd Generation Fringe Tracker

In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design.

astro-ph.IM↗

arXiv2006

VSI: a milli-arcsec spectro-imager for the VLTI

VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral resolution of: a) the close environments of young stars probing the initial conditions for planet formation; b) the surfaces of stars; c) the environment of evolved stars, stellar remnants and stellar winds, and d) the central region of active galactic nuclei and supermassive black holes. The science cases allowed us to specify the astrophysical requirements of the instrument and to define the necessary studies of the science group for phase A.

astro-ph↗

arXiv2005

Integrated optics for astronomical interferometry - VI. Coupling the light of the VLTI in K band

Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device and compare its properties to other single mode beam combiner like the previously used MONA fiber coupler. The IO combiner provides a high optical throughput, a contrast of 89% with a night-to-night stability of a few percent. Even if a dispersive phase is present, we show that it does not bias the measured Fourier visibility estimate. An upper limit of 0.005 for the cross-talk between linear polarization states has been measured. We take advantage of the intrinsic contrast stability to test a new astronomical prodecure for calibrating diameters of simple stars by simultaneously fitting the instrumental contrast and the apparent stellar diameters. This method reaches an accuracy with diameter errors of the order of previous ones but without the need of an already known calibrator. These results are an important step of integrated optics and paves the road to incoming imaging interferometer projects.

astro-ph↗

arXiv2005

VITRUV - Imaging close environments of stars and galaxies with the VLTI at milli-arcsec resolution

The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTICON program.

astro-ph↗