arXiv subjects

Laurent Joly

Publications and source records attributed to Laurent Joly.

At least 37 records · Page 2Linked to original sources

arXiv2021

Theoretical framework for the atomistic modeling of frequency-dependent liquid-solid friction

Nanofluidics shows great promise for energy conversion and desalination applications. The performance of nanofluidic devices is controlled by liquid-solid friction, quantified by the Navier friction coefficient (FC). Despite decades of research, there is no well-established generic framework to determine the frequency dependent Navier FC from atomistic simulations. Here, we have derived analytical expressions to connect the Navier FC to the random force autocorrelation on the confining wall, from the observation that the random force autocorrelation can be related to the hydrodynamic boundary condition, where the Navier FC appears. The analytical framework is generic in the sense that it explicitly includes the system size dependence and also the frequency dependence of the FC, which enabled us to address (i) the long-standing plateau issue in the evaluation of the FC and (ii) the non-Markovian behavior of liquid-solid friction of a Lennard-Jones liquid and of water on various walls and at various temperatures, including the supercooled regime. This new framework opens the way to explore the frequency dependent FC for a wide range of complex liquids.

cond-mat.soft↗

arXiv2020

Fast Increase of Nanofluidic Slip in Supercooled Water: the Key Role of Dynamics

Nanofluidics is an emerging field offering innovative solutions for energy harvesting and desalination. The efficiency of these applications depends strongly on liquid-solid slip, arising from a favorable ratio between viscosity and interfacial friction. Using molecular dynamics simulations, we show that wall slip increases strongly when water is cooled below its melting point. For water on graphene, the slip length is multiplied by up to a factor of five and reaches $230$nm at the lowest simulated temperature, $T \sim 225$K; experiments in nanopores can reach much lower temperatures and could reveal even more drastic changes. The predicted fast increase in water slip can also be detected at supercoolings reached experimentally in bulk water, as well as in droplets flowing on anti-icing surfaces. We explain the anomalous slip behavior in the supercooled regime by a decoupling between viscosity and bulk density relaxation dynamics, and we rationalize the wall-type dependency of the enhancement in terms of interfacial density relaxation dynamics. By providing fundamental insights on the molecular mechanisms of hydrodynamic transport in both interfacial and bulk water in the supercooled regime, this study is relevant to the design of anti-icing surfaces and it also paves the way to explore new behaviors in supercooled nanofluidic systems.

cond-mat.soft↗

arXiv2020

Liquid-solid slip on charged walls: dramatic impact of charge distribution

Nanofluidic systems show great promises for applications in energy conversion, where their performance can be enhanced by nanoscale liquid-solid slip. However, efficiency is also controlled by surface charge, which is known to reduce slip. Combining molecular dynamics simulations and analytical developments, we show the dramatic impact of surface charge distribution on the slip-charge coupling. Homogeneously charged graphene exhibits a very favorable slip-charge relation (rationalized with a new theoretical model correcting some weaknesses of the existing ones), leading to giant electrokinetic energy conversion. In contrast, slip is strongly affected on heterogeneously charged surfaces, due to the viscous drag induced by counter-ions trapped on the surface. In that case slip should depend on the detailed physical chemistry of the interface controlling the fraction of bound ions. Our numerical results and theoretical models provide new fundamental insight on the molecular mechanisms of liquid-solid slip, and practical guidelines for searching new functional interfaces with optimal energy conversion properties, e.g. for blue energy or waste heat harvesting.

cond-mat.soft↗

arXiv2020

Molecular modeling of aqueous electrolytes at interfaces: effects of long-range dispersion forces and of ionic charge rescaling

Molecular dynamics simulations of aqueous electrolytes generally rely on empirical force fields, combining dispersion interactions - described by a truncated Lennard-Jones (LJ) potential - and electrostatic interactions - described by a Coulomb potential computed with a long-range solver. Recently, force fields using rescaled ionic charges (electronic continuum correction, ECC), possibly complemented with rescaling of LJ parameters (electronic continuum correction rescaled, ECCR), have shown promising results in bulk, but their performance at interfaces has been less explored. Here we started by exploring the impact of the LJ potential truncation on the surface tension of a sodium chloride aqueous solution. We show a discrepancy between the numerical predictions for truncated LJ interactions with a large cutoff and for untruncated LJ interactions computed with a long-range solver, which can bias comparison of force field predictions with experiments. Using a long-range solver for LJ interactions, we then show that an ionic charge rescaling factor chosen to correct long-range electrostatic interactions in bulk also describes accurately image charge repulsion at the liquid-vapor interface, and that the rescaling of LJ parameters in ECCR models - aimed at capturing local ion-ion and ion-water interactions in bulk - also describes well the formation of an ionic double layer at the liquid-vapor interface. Overall, these results suggest that the molecular modeling of aqueous electrolytes at interfaces would benefit from using long-range solvers for dispersion forces, and from using ECCR models, where the charge rescaling factor should be chosen to correct long-range electrostatic interactions.

cond-mat.soft↗

arXiv2019

Giant thermoelectric response of nanofluidic systems driven by water excess enthalpy

Nanofluidic systems could in principle be used to produce electricity from waste heat, but current theoretical descriptions predict a rather poor performance as compared to thermoelectric solid materials. Here we investigate the thermoelectric response of NaCl and NaI solutions confined between charged walls, using molecular dynamics simulations. We compute a giant thermoelectric response, two orders of magnitude larger than the predictions of standard models. We show that water excess enthalpy -- neglected in the standard picture -- plays a dominant role in combination with the electroosmotic mobility of the liquid-solid interface. Accordingly, the thermoelectric response can be boosted using surfaces with large hydrodynamic slip. Overall, the heat harvesting performance of the model systems considered here is comparable to that of the best thermoelectric materials, and the fundamental insight provided by molecular dynamics suggests guidelines to further optimize the performance, opening the way to recycle waste heat using nanofluidic devices.

cond-mat.stat-mech↗

arXiv2018

Measuring surface charge: why experimental characterization and molecular modeling should be coupled

Surface charge controls many static and dynamic properties of soft matter and micro/nanofluidic systems, but its unambiguous measurement forms a challenge. Standard characterization methods typically probe an effective surface charge, which provides limited insight into the distribution and dynamics of charge across the interface, and which cannot predict consistently all surface-charge-governed properties. New experimental approaches provide local information on both structure and transport, but models are typically required to interpret raw data. Conversely, molecular dynamics simulations have helped showing the limits of standard models and developing more accurate ones, but their reliability is limited by the empirical interaction potentials they are usually based on. This review highlights recent developments and limitations in both experimental and computational research focusing on the liquid-solid interface. Based on recent studies, we make the case that coupling of experiments and simulations is pivotal tomitigate methodological shortcomings and address open problems pertaining to charged interfaces.

cond-mat.soft↗

arXiv2018

Viscosity and self-diffusion of supercooled and stretched water from molecular dynamics simulations

Among the numerous anomalies of water, the acceleration of dynamics under pressure is particularly puzzling. Whereas the diffusivity anomaly observed in experiments has been reproduced in several computer studies, the parallel viscosity anomaly has received less attention. Here we simulate viscosity and self-diffusion coefficient of the TIP4P/2005 water model over a broad temperature and pressure range. We reproduce the experimental behavior, and find additional anomalies at negative pressure. The anomalous effect of pressure on dynamic properties becomes more pronounced upon cooling, reaching two orders of magnitude for viscosity at 220 K. We analyze our results with a dynamic extension of a thermodynamic two-state model, an approach which has proved successful in describing experimental data. Water is regarded as a mixture of interconverting species with contrasting dynamic behaviors, one being strong (Arrhenius), and the other fragile (non-Arrhenius). The dynamic parameters of the two-state models are remarkably close between experiment and simulations. The larger pressure range accessible to simulations suggests a modification of the dynamic two-state model, which in turn also improves the agreement with experimental data. Furthermore, our simulations demonstrate the decoupling between viscosity $η$ and self-diffusion coefficient $D$ as a function of temperature $T$. The Stokes-Einstein relation, which predicts a constant $D η/T$, is violated when $T$ is lowered, in connection with the Widom line defined by an equal fraction of the two interconverting species. These results provide a unifying picture of thermodynamics and dynamics in water, and call for experiments at negative pressure.

physics.chem-ph↗

arXiv2017

What controls thermo-osmosis? Molecular simulations show the critical role of interfacial hydrodynamics

Thermo-osmotic and related thermo-phoretic phenomena can be found in many situations from biology to colloid science, but the underlying molecular mechanisms remain largely unexplored. Using molecular dynamics simulations, we measured the thermo-osmosis coefficient by both mechano-caloric and thermo-osmotic routes, for different solid-liquid interfacial energies. The simulations reveal in particular the crucial role of nanoscale interfacial hydrodynamics. For non-wetting surfaces , thermo-osmotic transport is largely amplified by hydrodynamic slip at the interface. For wetting surfaces, the position of the hydrodynamic shear plane plays a key role in determining the amplitude and sign of the thermo-osmosis coefficient. Finally, we measure a giant thermo-osmotic response of the water-graphene interface, which we relate to the very low interfacial friction displayed by this system. These results open new perspectives for the design of efficient functional interfaces for, e.g., waste heat harvesting.

cond-mat.soft↗

arXiv2017

Communication: Truncated non-bonded potentials can yield unphysical behavior in molecular dynamics simulations of interfaces

Non-bonded potentials are included in most force fields and therefore widely used in classical molecular dynamics simulations of materials and interfacial phenomena. It is commonplace to truncate these potentials for computational efficiency based on the assumption that errors are negligible for reasonable cutoffs or compensated for by adjusting other interaction parameters. Arising from a metadynamics study of the wetting transition of water on a solid substrate, we find that the influence of the cutoff is unexpectedly strong and can change the character of the wetting transition from continuous to first order by creating artificial metastable wetting states. Common cutoff corrections such as the use of a force switching function, a shifted potential, or a shifted force do not avoid this. Such a qualitative difference urges caution and suggests that using truncated non-bonded potentials can induce unphysical behavior that cannot be fully accounted for by adjusting other interaction parameters.

physics.comp-ph↗

arXiv2017

Assessment of elastic models in supercooled water: A molecular dynamics study with the TIP4P/2005f force field

Glass formers exhibit a viscoelastic behavior: at the laboratory timescale, they behave like (glassy) solids at low temperatures, and like liquids at high temperatures. Based on this observation, elastic models relate the long time supercooled dynamics to short time elastic properties of the supercooled liquid. In the present work, we assess the validity of elastic models for the shear viscosity and the $α$-relaxation time of supercooled water, using molecular dynamics simulations with the TIP4P/2005f force field over a wide range of temperatures. We show that elastic models provide a good description of supercooled water dynamics. For the viscosity, two different regimes are observed and the crossover temperature is found to be close to the one where the Stokes-Einstein relation starts to be violated. Our simulations show that only shear properties are important to characterize the effective flow activation energy. This study calls for experimental determination of the high frequency elastic properties of water at low temperatures.

physics.chem-ph↗

arXiv2017

Separation delay via hydro-acoustic control of a NACA4412 airfoil in pre-stalled conditions

We have performed large-eddy simulations of turbulent separation control via impedance boundary conditions (IBCs) on a \nacafft airfoil in near-stalled conditions. The uncontrolled baseline flow is obtained for freestream Mach numbers of $M_\infty=0.3$, chord-Reynolds numbers $Re_c = 1.5\times10^6$ and angle of attack, $α=14^{\circ{}}$. Flow control is applied via imposition of complex IBCs using the time-domain implementation developed by Scalo, Bodart, and Lele, $\textit{Phys. Fluids} $(2015). Separation is delayed due to the enhanced mixing associated with convectively amplified spanwise-oriented Kelvin-Helmholtz (KH) rollers, generated via hydro-acoustic instabilities. The latter are the result of the interaction of the wall-normal transpiration through the impedance panel and the overlying mean background shear. The result is an alteration of the coupled instability between the separating shear layer and the vortex shedding in the wake (already present in the uncontrolled baseline flow) yielding unique wake topologies associated with different intensities for the passively generated KH vortical structures. Specifically, enhancements up to +13\% in the lift coefficients have been obtained. Results show that tuning of the resonant cavities below the natural shedding frequency is required to generate KH rollers structures with a sufficiently large entrainment diameter to encompass the full extent of the separated region, thereby enhancing mixing and promoting reattachment. Overall, the results presented in this work show that the adoption of hydro-acoustically tuned resonant panels is a promising passive control technique for boundary layer separation control.

physics.flu-dyn↗

arXiv2016

Carbon membranes for efficient water-ethanol separation

We demonstrate, on the basis of molecular dynamics simulations, the possibility of an efficient water-ethanol separation using nanoporous carbon membranes, namely carbon nanotube membranes, nanoporous graphene sheets, and multilayer graphene membranes. While these carbon membranes are in general permeable to both pure liquids, they exhibit a counter-intuitive "self-semi-permeability" to water in the presence of water-ethanol mixtures. This originates in a preferred ethanol adsorption in nanoconfinement that prevents water molecules from entering the carbon nanopores. An osmotic pressure is accordingly expressed across the carbon membranes for the water-ethanol mixture, which agrees with the classic van't Hoff type expression. This suggests a robust and versatile membrane-based separation, built on a pressure-driven reverse-osmosis process across these carbon-based membranes. In particular, the recent development of large-scale 'graphene-oxide' like membranes then opens an avenue for a versatile and efficient ethanol dehydration using this separation process, with possible application for bio-ethanol fabrication.

cond-mat.soft↗

arXiv2016

Anomalous capillary filling and wettability reversal in nanochannels

This work revisits capillary filling dynamics in the regime of nanometric to subnanometric channels. Using molecular dynamics simulations of water in carbon nanotubes, we show that for tube radii below one nanometer, both the filling velocity and the Jurin rise vary non-monotonically with the tube radius. Strikingly, with fixed chemical surface properties, this leads to confinement-induced reversal of the tube wettability from hydrophilic to hydrophobic for specific values of the radius. By comparing with a model liquid metal, we show that these effects are not specific to water. Using complementary data from slit channels, we then show that they can be described using the disjoin-ing pressure associated with the liquid structuring in confinement. This breakdown of the standard continuum framework is of main importance in the context of capillary effects in nanoporous media, with potential interests ranging from membrane selectivity to mechanical energy storage.

physics.flu-dyn↗

arXiv2015

Friction of Water on Graphene and Hexagonal Boron Nitride from ab initio Methods: Very Different Slippage Despite Very Similar Interface Structures

Friction is one of the main sources of dissipation at liquid water/solid interfaces. Despite recent progress, a detailed understanding of water/solid friction in connection with the structure and energetics of the solid surface is lacking. Here we show for the first time that \textit{ab initio} molecular dynamics can be used to unravel the connection between the structure of nanoscale water and friction for liquid water in contact with graphene and with hexagonal boron nitride. We find that whilst the interface presents a very similar structure between the two sheets, the friction coefficient on boron nitride is $\approx 3$ times larger than that on graphene. This comes about because of the greater corrugation of the energy landscape on boron nitride arising from specific electronic structure effects. We discuss how a subtle dependence of the friction on the atomistic details of a surface, that is not related to its wetting properties, may have a significant impact on the transport of water at the nanoscale, with implications for the development of membranes for desalination and for osmotic power harvesting.

cond-mat.mes-hall↗

arXiv2015

Large permeabilities of hourglass nanopores: From hydrodynamics to single file transport

In fluid transport across nanopores, there is a fundamental dissipation that arises from the connection between the pore and the macroscopic reservoirs. This entrance effect can hinder the whole transport in certain situations, for short pores and/or highly slipping channels. In this paper, we explore the hydrodynamic permeability of hourglass shape nanopores using molecular dynamics (MD) simulations, with the central pore size ranging from several nanometers down to a few Angstr{ö}ms. Surprisingly, we find a very good agreement between MD results and continuum hydrodynamic predictions, even for the smallest systems undergoing single file transport of water. An optimum of permeability is found for an opening angle around 5 degree, in agreement with continuum predictions, yielding a permeability five times larger than for a straight nanotube. Moreover, we find that the permeability of hourglass shape nanopores is even larger than single nanopores pierced in a molecular thin graphene sheet. This suggests that designing the geometry of nanopores may help considerably increasing the macroscopic permeability of membranes.

cond-mat.soft↗

arXiv2014

Anomalous zeta potential in foam films

Electrokinetic effects offer a method of choice to control flows in micro and nanofluidic systems. While a rather clear picture of these phenomena exists now for the liquid-solid interfaces, the case of liquid-air interfaces remains largely unexplored. Here we investigate at the molecular level electrokinetic transport in a liquid film covered with ionic surfactants. We find that the zeta potential, quantifying the amplitude of electrokinetic effects, depends on the surfactant coverage in an unexpected way. First, it increases upon lowering surfactant coverage from saturation. Second, it does not vanish in the limit of low coverage, but instead approaches a finite value. This behavior is rationalized by taking into account the key role of interfacial hydrodynamics, together with an ion-binding mechanism. We point out implications of these results for the strongly debated measurements of zeta potential at free interfaces, and for electrokinetic transport in liquid foams.

cond-mat.soft↗

arXiv2014

Giant Slip at Liquid-Liquid Interfaces Using Hydrophobic Ball Bearings

Liquid-gas-liquid interfaces stabilized by hydrophobic beads behave as ball bearings under shear and exhibit a giant slip. Using a scaling analysis and molecular dynamics simulations we predict that, when the contact angle theta between the beads and the liquid is large, the slip length diverges as R rho(-1) (pi -theta)(-3) where R is the bead radius, and theta is the bead density. DOI: 10.1103/PhysRevLett.110.104504

cond-mat.soft↗

arXiv2013

Optimizing water permeability through the hourglass shape of aquaporins

The ubiquitous aquaporin channels are able to conduct water across cell membranes, combining the seemingly antagonist functions of a very high selectivity with a remarkable permeability. Whereas molecular details are obvious keys to perform these tasks, the overall efficiency of transport in such nanopores is also strongly limited by viscous dissipation arising at the connection between the nanoconstriction and the nearby bulk reservoirs. In this contribution, we focus on these so-called entrance effects and specifically examine whether the characteristic hourglass shape of aquaporins may arise from a geometrical optimum for such hydrodynamic dissipation. Using a combination of finite-element calculations and analytical modeling, we show that conical entrances with suitable opening angle can indeed provide a large increase of the overall channel permeability. Moreover, the optimal opening angles that maximize the permeability are found to compare well with the angles measured in a large variety of aquaporins. This suggests that the hourglass shape of aquaporins could be the result of a natural selection process toward optimal hydrodynamic transport. Finally, in a biomimetic perspective, these results provide guidelines to design artificial nanopores with optimal performances.

cond-mat.soft↗