arXiv subjects

Lawrence Ramsey

Publications and source records attributed to Lawrence Ramsey.

At least 19 recordsLinked to original sources

arXiv2026

MiraSOL: a DMD-based spectrograph for resolved solar spectroscopy

We present the science motivation, preliminary design requirements, device laboratory testing and a prototype for an new experimental platform for solar observations, MiraSOL. MiraSOL will use digital micromirror technology to actively select regions on the solar disk for spectroscopic observation to determine the spatially dependent radial velocity signatures of stellar variability, and can create transits on the solar disk to probe the effects of stellar contamination on exoplanet transmission spectra. MiraSOL uses the Texas Instruments DLP801RE as a spatial light modulator to allow a mask, with 3 arcsecond spatial sampling per micromirror, capable of resolving features on the solar disk. This instrument will have a fiber output which can then be coupled with state-of-the-art extreme precision radial velocity (EPRV) spectrometers, such as HPF or NEID, for high resolving power, stable spectra of sunspots and plage, or a low resolution spectrometer for studies of stellar contamination in transit spectra. We discuss a 60 Hz flicker signal we discovered, likely due to the commercial off-the-shelf (COTS) evaluation board of the digital micromirror device electronics. We also build a proof-of-concept prototype and demonstrate imaging and pixel-level control of the full solar disk to demonstrate the feasibility of this technology.

astro-ph.IM↗

arXiv2024

TOI-2015b: A Warm Neptune with Transit Timing Variations Orbiting an Active mid M Dwarf

We report the discovery of a close-in ($P_{\mathrm{orb}} = 3.349\:\mathrm{days}$) warm Neptune with clear transit timing variations (TTVs) orbiting the nearby ($d=47.3\:\mathrm{pc}$) active M4 star, TOI-2015. We characterize the planet's properties using TESS photometry, precise near-infrared radial velocities (RV) with the Habitable-zone Planet Finder (HP) Spectrograph, ground-based photometry, and high-contrast imaging. A joint photometry and RV fit yields a radius $R_p~=~3.37_{-0.20}^{+0.15} \:\mathrm{R_\oplus}$, mass $m_p~=~16.4_{-4.1}^{+4.1}\:\mathrm{M_\oplus}$, and density $ρ_p~=~2.32_{-0.37}^{+0.38} \:\mathrm{g cm^{-3}}$ for TOI-2015b, suggesting a likely volatile-rich planet. The young, active host star has a rotation period of $P_{\mathrm{rot}}~=~8.7 \pm~0.9~\mathrm{days}$ and associated rotation-based age estimate of $1.1~\pm~0.1\:\mathrm{Gyr}$. Though no other transiting planets are seen in the TESS data, the system shows clear TTVs of super period $P_{\mathrm{sup}}~\approx~430\:\mathrm{days}$ and amplitude $\sim$$100\:\mathrm{minutes}$. After considering multiple likely period ratio models, we show an outer planet candidate near a 2:1 resonance can explain the observed TTVs while offering a dynamically stable solution. However, other possible two-planet solutions -- including 3:2 and 4:3 resonance -- cannot be conclusively excluded without further observations. Assuming a 2:1 resonance in the joint TTV-RV modeling suggests a mass of $m_b~=~13.3_{-4.5}^{+4.7}\:\mathrm{M_\oplus}$ for TOI-2015b and $m_c~=~6.8_{-2.3}^{+3.5}\:\mathrm{M_\oplus}$ for the outer candidate. Additional transit and RV observations will be beneficial to explicitly identify the resonance and further characterize the properties of the system.

astro-ph.EP↗

arXiv2023

An extreme test case for planet formation: a close-in Neptune orbiting an ultracool star

In current theories of planet formation, close-orbiting planets as massive as Neptune are expected to be very rare around low-mass stars. We report the discovery of a Neptune-mass planet orbiting the `ultracool' star LHS 3154, which is nine times less massive than the Sun. The planet's orbital period is 3.7 days and its minimum mass is 13.2 Earth masses, giving it the largest known planet-to-star mass ratio among short-period planets ($<$\,100 days) orbiting ultracool stars. Both the core accretion and gravitational instability theories for planet formation struggle to account for this system. In the core-accretion scenario, in particular, the dust mass of the protoplanetary disk would need to be an order of magnitude higher than typically seen in protoplanetary disk observations of ultracool stars.

astro-ph.EP↗

arXiv2021

Gaia 20eae: A newly discovered episodically accreting young star

The Gaia Alert System issued an alert on 2020 August 28, on Gaia 20eae when its light curve showed a $\sim$4.25 magnitude outburst. We present multi-wavelength photometric and spectroscopic follow-up observations of this source since 2020 August and identify it as the newest member of the FUor/EXor family of sources. We find that the present brightening of Gaia 20eae is not due to the dust clearing event but due to an intrinsic change in the spectral energy distribution. The light curve of Gaia 20eae shows a transition stage during which most of its brightness ($\sim$3.4 mag) has occurred at a short timescale of 34 days with a rise-rate of 3 mag/month. Gaia 20eae has now started to decay at a rate of 0.3 mag/month. We have detected a strong P Cygni profile in H$α$ which indicates the presence of winds originating from regions close to the accretion. We find signatures of very strong and turbulent outflow and accretion in Gaia 20eae during this outburst phase. We have also detected a red-shifted absorption component in all the Ca II IR triplet lines consistent with signature of hot in-falling gas in the magnetospheric accretion funnel. This enables us to constrain the viewing angle with respect to the accretion funnel. Our investigation of Gaia 20eae points towards magnetospheric accretion being the phenomenon for the current outburst.

astro-ph.SR↗

arXiv2021

Stellar Activity Manifesting at a One Year Alias Explains Barnard b as a False Positive

Barnard's star is among the most studied stars given its proximity to the Sun. It is often considered $the$ Radial Velocity (RV) standard for fully convective stars due to its RV stability and equatorial declination. Recently, an $M \sin i = 3.3 M_{\oplus}$ super-Earth planet candidate with a 233 day orbital period was announced by Ribas et al. (2018). New observations from the near-infrared Habitable-zone Planet Finder (HPF) Doppler spectrometer do not show this planetary signal. We ran a suite of experiments on both the original data and a combined original + HPF data set. These experiments include model comparisons, periodogram analyses, and sampling sensitivity, all of which show the signal at the proposed period of 233 days is transitory in nature. The power in the signal is largely contained within 211 RVs that were taken within a 1000 day span of observing. Our preferred model of the system is one which features stellar activity without a planet. We propose that the candidate planetary signal is an alias of the 145 day rotation period. This result highlights the challenge of analyzing long-term, quasi-periodic activity signals over multi-year and multi-instrument observing campaigns.

astro-ph.EP↗

arXiv2020

The Habitable-zone Planet Finder Reveals A High Mass and a Low Obliquity for the Young Neptune K2-25b

Using radial-velocity data from the Habitable-zone Planet Finder, we have measured the mass of the Neptune-sized planet K2-25b, as well as the obliquity of its M4.5-dwarf host star in the 600-800MYr Hyades cluster. This is one of the youngest planetary systems for which both of these quantities have been measured, and one of the very few M dwarfs with a measured obliquity. Based on a joint analysis of the radial velocity data, time-series photometry from the K2 mission, and new transit light curves obtained with diffuser-assisted photometry, the planet's radius and mass are $3.44\pm 0.12 \mathrm{R_\oplus}$ and $24.5_{-5.2}^{+5.7} \mathrm{M_\oplus}$. These properties are compatible with a rocky core enshrouded by a thin hydrogen-helium atmosphere (5% by mass). We measure an orbital eccentricity of $e=0.43 \pm 0.05$. The sky-projected stellar obliquity is $λ=3 \pm 16^{\circ}$, compatible with spin-orbit alignment, in contrast to other "hot Neptunes" that have been studied around older stars.

astro-ph.EP↗

arXiv2020

A Mini-Neptune and a Venus-Zone Planet in the Radius Valley Orbiting the Nearby M2-dwarf TOI-1266: Validation with the Habitable-zone Planet Finder

We report on the validation of two planets orbiting the nearby (36pc) M2 dwarf TOI-1266 observed by the TESS mission. The inner planet is sub-Neptune-sized ($R=2.46 \pm 0.08 R_\oplus$) with an orbital period of 10.9 days. The outer planet has a radius of $1.67_{-0.11}^{+0.09} R_\oplus$ and resides in the exoplanet Radius Valley---the transition region between rocky and gaseous planets. With an orbital period of 18.8 days, the outer planet receives an insolation flux of 2.4 times that of Earth, similar to the insolation of Venus. Using precision near-infrared radial velocities with the Habitable-zone Planet Finder Spectrograph, we place upper mass limits of $15.9 M_\oplus$ and $6.4 M_\oplus$ at 95% confidence for the inner and outer planet, respectively. A more precise mass constraint of planet c, achievable with current RV instruments given the host star brightness (V=12.9, J=9.7), will yield further insights into the dominant processes sculpting the exoplanet Radius Valley.

astro-ph.EP↗

arXiv2020

Evidence for He I 10830 Å~ absorption during the transit of a warm Neptune around the M-dwarf GJ 3470 with the Habitable-zone Planet Finder

Understanding the dynamics and kinematics of out-flowing atmospheres of hot and warm exoplanets is crucial to understanding the origins and evolutionary history of the exoplanets near the evaporation desert. Recently, ground based measurements of the meta-stable Helium atom's resonant absorption at 10830 Å~has become a powerful probe of the base environment which is driving the outflow of exoplanet atmospheres. We report evidence for the He I 10830 Å~in absorption (equivalent width $\sim$ $0.012 \pm 0.002$ Å) in the exosphere of a warm Neptune orbiting the M-dwarf GJ 3470, during three transits using the Habitable Zone Planet Finder (HPF) near infrared spectrograph. This marks the first reported evidence for He I 10830 Å\, atmospheric absorption for a planet orbiting an M-dwarf. Our detected absorption is broad and its blueshifted wing extends to -36 km/sec, the largest reported in the literature to date. We modelled the state of Helium atoms in the exosphere of GJ3470b based on assumptions on the UV and X-ray flux of GJ 3470, and found our measurement of flux-weighted column density of meta-stable state Helium $(N_{He^2_3S} = 2.4 \times 10^{10} \mathrm{cm^{-2}})$, derived from our transit observations, to be consistent with model, within its uncertainties. The methodology developed here will be useful to study and constrain the atmospheric outflow models of other exoplanets like GJ 3470b which are near the edge of the evaporation desert.

astro-ph.EP↗

arXiv2019

A sub-Neptune sized planet transiting the M2.5-dwarf G 9-40: Validation with the Habitable-zone Planet Finder

We validate the discovery of a 2 Earth radii sub-Neptune-size planet around the nearby high proper motion M2.5-dwarf G 9-40 (EPIC 212048748), using high-precision near-infrared (NIR) radial velocity (RV) observations with the Habitable-zone Planet Finder (HPF), precision diffuser-assisted ground-based photometry with a custom narrow-band photometric filter, and adaptive optics imaging. At a distance of $d=27.9\mathrm{pc}$, G 9-40b is the second closest transiting planet discovered by K2 to date. The planet's large transit depth ($\sim$3500ppm), combined with the proximity and brightness of the host star at NIR wavelengths (J=10, K=9.2) makes G 9-40b one of the most favorable sub-Neptune-sized planet orbiting an M-dwarf for transmission spectroscopy with JWST, ARIEL, and the upcoming Extremely Large Telescopes. The star is relatively inactive with a rotation period of $\sim$29 days determined from the K2 photometry. To estimate spectroscopic stellar parameters, we describe our implementation of an empirical spectral matching algorithm using the high-resolution NIR HPF spectra. Using this algorithm, we obtain an effective temperature of $T_{\mathrm{eff}}=3404\pm73$K, and metallicity of $\mathrm{[Fe/H]}=-0.08\pm0.13$. Our RVs, when coupled with the orbital parameters derived from the transit photometry, exclude planet masses above $11.7 M_\oplus$ with 99.7% confidence assuming a circular orbit. From its radius, we predict a mass of $M=5.0^{+3.8}_{-1.9} M_\oplus$ and an RV semi-amplitude of $K=4.1^{+3.1}_{-1.6}\mathrm{m\:s^{-1}}$, making its mass measurable with current RV facilities. We urge further RV follow-up observations to precisely measure its mass, to enable precise transmission spectroscopic measurements in the future.

astro-ph.EP↗

arXiv2016

A Versatile Technique to Enable sub-milli-Kelvin Instrument Stability for Precise Radial Velocity Measurements: Tests with the Habitable-zone Planet Finder

Insufficient instrument thermo-mechanical stability is one of the many roadblocks for achieving 10cm/s Doppler radial velocity (RV) precision, the precision needed to detect Earth-twins orbiting Solar-type stars. Highly temperature and pressure stabilized spectrographs allow us to better calibrate out instrumental drifts, thereby helping in distinguishing instrumental noise from astrophysical stellar signals. We present the design and performance of the Environmental Control System (ECS) for the Habitable-zone Planet Finder (HPF), a high-resolution (R=50,000) fiber-fed near infrared (NIR) spectrograph for the 10m Hobby Eberly Telescope at McDonald Observatory. HPF will operate at 180K, driven by the choice of an H2RG NIR detector array with a 1.7micron cutoff. This ECS has demonstrated 0.6mK RMS stability over 15 days at both 180K and 300K, and maintained high quality vacuum (<$10^{-7}$Torr) over months, during long-term stability tests conducted without a planned passive thermal enclosure surrounding the vacuum chamber. This control scheme is versatile and can be applied as a blueprint to stabilize future NIR and optical high precision Doppler instruments over a wide temperature range from ~77K to elevated room temperatures. A similar ECS is being implemented to stabilize NEID, the NASA/NSF NN-EXPLORE spectrograph for the 3.5m WIYN telescope at Kitt Peak, operating at 300K. A full SolidWorks 3D-CAD model and a comprehensive parts list of the HPF ECS are included with this manuscript to facilitate the adaptation of this versatile environmental control scheme in the broader astronomical community.

astro-ph.IM↗

arXiv2016

A comprehensive radial velocity error budget for next generation Doppler spectrometers

We describe a detailed radial velocity error budget for the NASA-NSF Extreme Precision Doppler Spectrometer instrument concept NEID (NN-explore Exoplanet Investigations with Doppler spectroscopy). Such an instrument performance budget is a necessity for both identifying the variety of noise sources currently limiting Doppler measurements, and estimating the achievable performance of next generation exoplanet hunting Doppler spectrometers. For these instruments, no single source of instrumental error is expected to set the overall measurement floor. Rather, the overall instrumental measurement precision is set by the contribution of many individual error sources. We use a combination of numerical simulations, educated estimates based on published materials, extrapolations of physical models, results from laboratory measurements of spectroscopic subsystems, and informed upper limits for a variety of error sources to identify likely sources of systematic error and construct our global instrument performance error budget. While natively focused on the performance of the NEID instrument, this modular performance budget is immediately adaptable to a number of current and future instruments. Such an approach is an important step in charting a path towards improving Doppler measurement precisions to the levels necessary for discovering Earth-like planets.

astro-ph.IM↗

arXiv2015

An efficient, compact, and versatile fiber double scrambler for high precision radial velocity instruments

We present the design and test results of a compact optical fiber double-scrambler for high-resolution Doppler radial velocity instruments. This device consists of a single optic: a high-index $n$$\sim$2 ball lens that exchanges the near and far fields between two fibers. When used in conjunction with octagonal fibers, this device yields very high scrambling gains and greatly desensitizes the fiber output from any input illumination variations, thereby stabilizing the instrument profile of the spectrograph and improving the Doppler measurement precision. The system is also highly insensitive to input pupil variations, isolating the spectrograph from telescope illumination variations and seeing changes. By selecting the appropriate glass and lens diameter the highest efficiency is achieved when the fibers are practically in contact with the lens surface, greatly simplifying the alignment process when compared to classical double-scrambler systems. This prototype double-scrambler has demonstrated significant performance gains over previous systems, achieving scrambling gains in excess of 10,000 with a throughput of $\sim$87% using uncoated Polymicro octagonal fibers. Adding a circular fiber to the fiber train further increases the scrambling gain to $>$20,000, limited by laboratory measurement error. While this fiber system is designed for the Habitable-zone Planet Finder spectrograph, it is more generally applicable to other instruments in the visible and near-infrared. Given the simplicity and low cost, this fiber scrambler could also easily be multiplexed for large multi-object instruments.

astro-ph.IM↗

arXiv2014

Towards Understanding Stellar Radial Velocity Jitter as a Function of Wavelength: The Sun as a Proxy

Using solar spectral irradiance measurements from the SORCE spacecraft and the F/F' technique, we have estimated the radial velocity (RV) scatter induced on the Sun by stellar activity as a function of wavelength. Our goal was to evaluate the potential advantages of using new near-infrared (NIR) spectrographs to search for low-mass planets around bright F, G, and K stars by beating down activity effects. Unlike M dwarfs, which have higher fluxes and therefore greater RV information content in the NIR, solar-type stars are brightest at visible wavelengths, and, based solely on information content, are better suited to traditional optical RV surveys. However, we find that the F/F' estimated RV noise induced by stellar activity is diminished by up to a factor of 4 in the NIR versus the visible. Observations with the upcoming future generation of NIR instruments can be a valuable addition to the search for low-mass planets around bright FGK stars in reducing the amount of stellar noise affecting RV measurements.

astro-ph.SR↗

arXiv2014

The Habitable-zone Planet Finder Calibration System

We present the design concept of the wavelength calibration system for the Habitable-zone Planet Finder instrument (HPF), a precision radial velocity (RV) spectrograph designed to detect terrestrial-mass planets around M-dwarfs. HPF is a stabilized, fiber-fed, R$\sim$50,000 spectrograph operating in the near-infrared (NIR) z/Y/J bands from 0.84 to 1.3 microns. For HPF to achieve 1 m s$^{-1}$ or better measurement precision, a unique calibration system, stable to several times better precision, will be needed to accurately remove instrumental effects at an unprecedented level in the NIR. The primary wavelength calibration source is a laser frequency comb (LFC), currently in development at NIST Boulder, discussed separately in these proceedings. The LFC will be supplemented by a stabilized single-mode fiber Fabry-Perot interferometer reference source and Uranium-Neon lamp. The HPF calibration system will combine several other new technologies developed by the Penn State Optical-Infrared instrumentation group to improve RV measurement precision including a dynamic optical coupling system that significantly reduces modal noise effects. Each component has been thoroughly tested in the laboratory and has demonstrated significant performance gains over previous NIR calibration systems.

astro-ph.IM↗

arXiv2014

Development of Fiber Fabry-Perot Interferometers as Stable Near-infrared Calibration Sources for High Resolution Spectrographs

We discuss the ongoing development of single-mode fiber Fabry-Perot (FFP) Interferometers as precise astro-photonic calibration sources for high precision radial velocity (RV) spectrographs. FFPs are simple, inexpensive, monolithic units that can yield a stable and repeatable output spectrum. An FFP is a unique alternative to a traditional etalon, as the interferometric cavity is made of single-mode fiber rather than an air-gap spacer. This design allows for excellent collimation, high spectral finesse, rigid mechanical stability, insensitivity to vibrations, and no need for vacuum operation. The device we have tested is a commercially available product from Micron Optics. Our development path is targeted towards a calibration source for the Habitable-Zone Planet Finder (HPF), a near-infrared spectrograph designed to detect terrestrial-mass planets around low-mass stars, but this reference could also be used in many existing and planned fiber-fed spectrographs as we illustrate using the Apache Point Observatory Galactic Evolution Experiment (APOGEE) instrument. With precise temperature control of the fiber etalon, we achieve a thermal stability of 100 $μ$K and associated velocity uncertainty of 22 cm s$^{-1}$. We achieve a precision of $\approx$2 m s$^{-1}$ in a single APOGEE fiber over 12 hours using this new photonic reference after removal of systematic correlations. This high precision (close to the expected photon-limited floor) is a testament to both the excellent intrinsic wavelength stability of the fiber interferometer and the stability of the APOGEE instrument design. Overall instrument velocity precision is 80 cm s$^{-1}$ over 12 hours when averaged over all 300 APOGEE fibers and after removal of known trends and pressure correlations, implying the fiber etalon is intrinsically stable to significantly higher precision.

astro-ph.IM↗

arXiv2014

Suppression of Fiber Modal Noise Induced Radial Velocity Errors for Bright Emission-Line Calibration Sources

Modal noise in optical fibers imposes limits on the signal to noise and velocity precision achievable with the next generation of astronomical spectrographs. This is an increasingly pressing problem for precision radial velocity (RV) spectrographs in the near-infrared (NIR) and optical that require both high stability of the observed line profiles and high signal to noise. Many of these spectrographs plan to use highly coherent emission line calibration sources like laser frequency combs and Fabry-Perot etalons to achieve precision sufficient to detect terrestrial mass planets. These high precision calibration sources often use single mode fibers or highly coherent sources. Coupling light from single mode fibers to multi-mode fibers leads to only a very low number of modes being excited, thereby exacerbating the modal noise measured by the spectrograph. We present a commercial off-the-shelf (COTS) solution that significantly mitigates modal noise at all optical and NIR wavelengths, and which can be applied to spectrograph calibration systems. Our solution uses an integrating sphere in conjunction with a diffuser that is moved rapidly using electrostrictive polymers, and is generally superior to most tested forms of mechanical fiber agitation. We demonstrate a high level of modal noise reduction with a narrow bandwidth 1550 nm laser. Our relatively inexpensive solution immediately enables spectrographs to take advantage of the innate precision of bright state-of-the art calibration sources by removing a major source of systematic noise.

astro-ph.IM↗

arXiv2012

A near infrared frequency comb for Y+J band astronomical spectroscopy

Radial velocity (RV) surveys supported by high precision wavelength references (notably ThAr lamps and I2 cells) have successfully identified hundreds of exoplanets; however, as the search for exoplanets moves to cooler, lower mass stars, the optimum wave band for observation for these objects moves into the near infrared (NIR) and new wavelength standards are required. To address this need we are following up our successful deployment of an H band(1.45-1.7μm) laser frequency comb based wavelength reference with a comb working in the Y and J bands (0.98-1.3μm). This comb will be optimized for use with a 50,000 resolution NIR spectrograph such as the Penn State Habitable Zone Planet Finder. We present design and performance details of the current Y+J band comb.

astro-ph.IM↗

arXiv2012

Development of a New, Precise Near-infrared Doppler Wavelength Reference: A Fiber Fabry-Perot Interferometer

We present the ongoing development of a commercially available Micron Optics fiber-Fabry Perot Interferometer as a precise, stable, easy to use, and economic spectrograph reference with the goal of achieving <1 m/s long term stability. Fiber Fabry-Perot interferometers (FFP) create interference patterns by combining light traversing different delay paths. The interference creates a rich spectrum of narrow emission lines, ideal for use as a precise Doppler reference. This fully photonic reference could easily be installed in existing NIR spectrographs, turning high resolution fiber-fed spectrographs into precise Doppler velocimeters. First light results on the Sloan Digital Sky Survey III (SDSS-III) Apache Point Observatory Galactic Evolution Experiment (APOGEE) spectrograph and several tests of major support instruments are also presented. These instruments include a SuperK Photonics fiber supercontinuum laser source and precise temperature controller. A high resolution spectrum obtained using the NIST 2-m Fourier transform spectrometer (FTS) is also presented. We find our current temperature control precision of the FFP to be 0.15 mK, corresponding to a theoretical velocity stability of 35 cm/s due to temperature variations of the interferometer cavity.

astro-ph.IM↗