arXiv subjects

Le-Nam Tran

Publications and source records attributed to Le-Nam Tran.

At least 19 recordsLinked to original sources

arXiv2026

Robust SAC-Enabled UAV-RIS Assisted Secure MISO Systems With Untrusted EH Receivers

Secure downlink transmission in UAV-assisted reconfigurable intelligent surface (RIS)-enabled multiuser MISO systems is challenging due to imperfect channel state information (CSI), untrusted energy-harvesting receivers (UEHRs), and the strong coupling among UAV deployment, transmit power control, and RIS configuration. In this paper, we study a secure UAV-assisted RIS-enabled multiuser MISO system with UEHRs, where a hovering UAV-mounted RIS is jointly optimized in terms of its location, transmit power allocation, and discrete RIS phase shifts. The objective is to maximize the worst-case secrecy energy efficiency (WCSEE) under imperfect CSI and practical discrete phase-shift constraints. The resulting problem is highly nonconvex due to the fractional objective, coupled design variables, discrete phase shifts, and CSI uncertainty. To address these challenges, we propose two complementary approaches. First, a block coordinate descent (BCD) framework combined with successive convex approximation (SCA) is developed to solve a secrecy energy efficiency (SEE) formulation, serving as a structured model-based benchmark. Second, for the more general WCSEE problem, we propose a tailored soft actor-critic (SAC) framework that captures the coupling among variables and avoids repeated iterative optimization. Simulation results show that the proposed SAC method consistently outperforms conventional optimization and deep reinforcement learning (DRL)-based benchmarks, including deep deterministic policy gradient (DDPG) and twin delayed deep deterministic policy gradient (TD3), while maintaining robustness to CSI uncertainty and stable performance across system configurations.

eess.SP↗

arXiv2026

Secure Rate-Splitting and RIS Beamforming with Untrusted Energy Harvesting Receivers

We consider a reconfigurable intelligent surface (RIS)-assisted heterogeneous network comprising legitimate information-harvesting receivers (IHRs) and untrusted energy-harvesting receivers (UEHRs). A multi-antenna base station (BS) transmits confidential information to IHRs while ensuring sufficient energy transfer to UEHRs that may attempt eavesdropping. To enhance physical-layer security, we propose a secure rate-splitting multiple access (RSMA) scheme aided by a UAV-mounted RIS. The objective is to maximize fairness-based secrecy energy efficiency (SEE). Owing to the non-convexity of the formulated problem, we develop an alternating optimization framework that jointly designs the common message allocation, active precoders, and RIS phase shifts under transmit power and energy harvesting constraints, leveraging sequential convex approximation (SCA). Simulation results demonstrate the scalability of the proposed algorithm and its superior SEE performance compared to space-division multiple access (SDMA) and non-orthogonal multiple access (NOMA) benchmarks.

eess.SP↗

arXiv2026

Achievable Rate Optimization for Large Flexible Intelligent Metasurface Assisted Downlink MISO under Statistical CSI

The integration of electromagnetic metasurfaces into wireless communications enables intelligent control of the propagation environment. Recently, flexible intelligent metasurfaces (FIMs) have evolved beyond conventional reconfigurable intelligent surfaces (RISs), enabling three-dimensional surface deformation for adaptive wave manipulation. However, most existing FIM-aided system designs assume perfect instantaneous channel state information (CSI), which is impractical in large-scale networks due to the high training overhead and complicated channel estimation. To overcome this limitation, we propose a robust statistical-CSI-based optimization framework for downlink multiple-input single-output (MISO) systems with FIM-assisted transmitters. A block coordinate ascent (BCA)-based iterative algorithm is developed to jointly optimize power allocation and FIM morphing, maximizing the average achievable sum rate. Simulation results show that the proposed statistical-CSI-driven FIM design significantly outperforms conventional rigid antenna arrays (RAAs), validating its effectiveness and practicality.

eess.SP↗

arXiv2025

Energy-Efficient Designs for SIM-Based Broadcast MIMO Systems

Stacked intelligent metasurface (SIM), which consists of multiple layers of intelligent metasurfaces, is emerging as a promising solution for future wireless communication systems. In this timely context, we focus on broadcast multiple-input multiple-output (MIMO) systems and aim to characterize their energy efficiency (EE) performance. To explore the potential of SIM, we consider both dirty paper coding (DPC) and linear precoding (LP) and formulate the corresponding EE maximization problems. For DPC, we employ the broadcast channel (BC)-multiple-access channel (MAC) duality to obtain an equivalent problem, and optimize users' covariance matrices using the successive convex approximation (SCA) and Dinkelbach's methods. Since the phase shift optimization problem of the SIM meta-elements is one of extremely large size, we adopt a conventional projected gradient-based method for its simplicity. A similar approach is followed for the case of LP. Simulation results show that the proposed optimization methods for the considered SIM-based systems can significantly improve the EE, compared to conventional counterparts. Also, we demonstrate that the number of SIM meta-elements and their distribution across the SIM layers have a significant impact on both the achievable sum-rate and EE performance.

cs.IT↗

arXiv2025

A closed-loop $2\times4$ downlink MIMO Framework for 5G New Radio using OpenAirInterface

We present the first-of-a-kind closed-loop $2\times4$ MIMO implementation for the downlink of 5G Open RAN using OpenAirInterface (OAI), which is capable of transmitting up to two transmission layers. Our implementation is a fully functional 5G New Radio (5G NR) system, including the 5G Core Network (5G CN), 5G Radio Access Network (5G RAN), as well as 5G NR User Equipment (UEs). This serves as a foundational framework for further advancements in the context of emerging Open RAN (O-RAN) development. A key feature of our implementation is the enhanced Channel State Information (CSI) reporting procedure at the UE, which includes Rank Indicator (RI), Precoding Matrix Indicator (PMI), and Channel Quality Indicator (CQI). It is adjusted for the extended configuration to maximize data rates. To demonstrate the performance of our implementation, we measure the downlink data rates using $\textit{iperf3}$ in two scenarios: (i) fixed channels to assess two-layer data transmission and (ii) $\textit{Rice1}$ channels for general transmission analysis. The obtained simulation results demonstrate that, compared to the existing $2\times2$ MIMO configuration in the OAI, our implementation improves the data rates in almost all scenarios, especially at the high Signal-to-Noise-Ratios (SNRs).

eess.SP↗

arXiv2025

An Implementation of Multi-User MIMO Downlink for O-RAN 5G New Radio using OpenAirInterface

We present the first implementation of a Multi-User Multiple-Input Multiple-Output (MU-MIMO) transmission scheme on the Physical Downlink Shared Channel (PDSCH) for 5G Open Radio Access Network (O-RAN) based on OpenAirInterface (OAI). Our implementation features a fully functional O-RAN-compliant 5G New Radio (5G NR) system, including a 5G Core Network (5G CN), a refined 5G RAN, which is split into a Centre Unit (CU) and an Distributed Unit (DU), and 5G NR User Equipment (UEs). This implementation demonstrates MU-MIMO performance in the downlink while showcasing the disaggregation capabilities of O-RAN. Specifically, the Base Station (i.e. gNB) in our setup is capable of serving two UEs simultaneously over the same downlink Resource Block (RBs). User scheduling is performed based on the Precoding Matrix Indicators (PMIs) reported by the UEs according to the NR Channel State Information (CSI) reporting procedure. The system throughput performance is evaluated using $\textit{iperf}$. The obtained results via simulation and testbed experiments demonstrate that the MU-MIMO scheme achieves significant downlink throughput gains, particularly in the high Signal-to-Noise-Ratio (SNR) regime, while keeping the Block Error Rate (BLER) below the required threshold of $10^{-1}$ for both UEs.

eess.SP↗

arXiv2025

A Refined Alternating Optimization for Sum Rate Maximization in SIM-Aided Multiuser MISO Systems

Stacked intelligent metasurfaces (SIMs) have emerged as a disruptive technology for future wireless networks. To investigate their capabilities, we study the sum rate maximization problem in an SIM-based multiuser (MU) multiple-input single-output (MISO) downlink system. A vast majority of pioneer studies, if not all, address this fundamental problem using the prevailing alternating optimization (AO) framework, where the digital beamforming (DB) and SIM phase shifts are optimized alternately. However, many of these approaches suffer from suboptimal performance, quickly leading to performance saturation, when the number of SIM layers increases assuming the \emph{fixed SIM thickness}. In this letter, we demonstrate that significant performance gains can still be achieved, and such saturation does not occur with the proposed method in the considered setting. To this end, we provide practical design guidelines to improve AO-based optimization of digital precoders and SIM phase shifts. Specifically, we show that (i) optimizing the SIM phase shifts first yields significant performance improvements, compared to optimizing the DB first; and (ii) when applying projected gradient (PG) methods, which are gradually becoming more popular to optimize the phase shifts thanks to their scalability, we find that using an iterative PG method achieves better performance than the single PG step, which is commonly used in existing solutions. Based on these customizations, the proposed method achieves a higher achievable sum rate (ASR) of up to $\ensuremath{115.53\%}$, compared to benchmark schemes for the scenarios under consideration.

eess.SP↗

arXiv2025

Scaling Achievable Rates in SIM-aided MIMO Systems with Metasurface Layers: A Hybrid Optimization Framework

We investigate the achievable rate (AR) of a stacked intelligent metasurface (SIM)-aided holographic multiple-input multiple-output (HMIMO) system by jointly optimizing the SIM phase shifts and power allocation. Contrary to earlier studies suggesting that the AR decreases when the number of metasurface layers increases past a certain point for \emph{a fixed SIM thickness}, our findings demonstrate consistent increase. To achieve this, we introduce two problem formulations: one based on directly maximizing the AR (RMax) and the other focused on minimizing inter-stream interference (IMin). To solve the RMax problem, we apply Riemannian manifold optimization (RMO) and weighted minimum mean square error (WMMSE) methods to optimize the SIM phase shifts and power allocation alternately. For the IMin problem, we derive an efficient algorithm that iteratively updates each meta-atom's phase shift using a closed-form expression while keeping others fixed. Our key contribution is integrating these two approaches, where the IMin solution initializes the SIM phase shifts in the first algorithm. This hybrid strategy enhances AR performance across varying numbers of metasurface layers. Simulation results demonstrate that the proposed algorithms outperform existing benchmarks. Most importantly, we show that increasing the number of metasurface layers while keeping the SIM thickness fixed leads to significant AR improvements.

eess.SP↗

arXiv2025

Sensing Rate Optimization for Multi-Band Cooperative ISAC Systems

Integrated sensing and communication (ISAC) has been recognized as one of the key technologies for future wireless networks, which potentially need to operate in multiple frequency bands to satisfy ever-increasing demands for both communication and sensing services. Motivated by this, we consider the sum sensing rate (SR) optimization for a cooperative ISAC system with linear precoding, where each base station (BS) works in a different frequency band. With this aim, we propose an optimization algorithm based on the semi-definite rank relaxation that introduces covariance matrices as optimization variables, and we apply the inner approximation (IA) method to deal with the nonconvexity of the resulting problem. Simulation results show that the proposed algorithm increases the SR by approximately 25 % and 40 % compared to the case of equal power distribution in a cooperative ISAC system with two and three BSs, respectively. Additionally, the algorithm converges in only a few iterations, while its most beneficial implementation scenario is in the low power regime

cs.IT↗

arXiv2025

Variational Bayesian Channel Estimation and Data Detection for Cell-Free Massive MIMO with Low-Resolution Quantized Fronthaul Links

We study the joint channel estimation and data detection (JED) problem in a cell-free massive multiple-input multiple-output (CF-mMIMO) network, where access points (APs) communicate with a central processing unit (CPU) over fronthaul links. However, the bandwidth of these links is limited, and thus, presents challenges to the applicability of CF-mMIMO, especially with an ever-increasing number of users. To address this, we propose a method based on variational Bayesian (VB) inference for performing the JED process, where the APs forward low-resolution quantized versions of the signals to the CPU. We consider two approaches: \emph{quantization-and-estimation} (Q-E) and \emph{estimation-and-quantization} (E-Q). In the Q-E approach, each AP uses a low-bit quantizer to quantize the signal before forwarding it to the CPU, while in the E-Q approach, each AP first performs local channel estimation and then sends a low-bit quantized version of the estimated channel to the CPU. We evaluate the performance of our VB-based approach under perfect fronthaul link (PFL) with unquantized received signals, Q-E, and E-Q in terms of symbol error rate (SER), normalized mean square error (NMSE) of the channel estimation, computational complexity, and fronthaul signaling overhead. We also compare these results with those of the linear minimum mean squared error (LMMSE) method under the PFL scenario. Our numerical results show that both the VB(Q-E) and VB(E-Q) approaches achieve superior performance compared to LMMSE(PFL), benefiting from the nonlinear modeling inherent in VB. Furthermore, the VB(Q-E) method outperforms VB(E-Q) due to errors in the local channel estimation process at the APs within the VB(E-Q) approach.

eess.SP↗

arXiv2025

A Robust Design for BackCom Assisted Hybrid NOMA

Hybrid non-orthogonal multiple access (H-NOMA) is inherently an enabler of massive machine type communications, a key use case for sixth-generation (6G) systems. Together with backscatter communication (BackCom), it seamlessly integrates with the traditional orthogonal multiple access (OMA) techniques to yield superior performance gains. In this paper, we study BackCom assisted H-NOMA uplink transmission with the aim of minimizing power with imperfect channel state information (CSI), where a generalized representation for channel estimation error models is used. The considered power minimization problem with aggregate data constraints is both non-convex and intractable. For the considered imperfect CSI models, we use Lagrange duality and the majorization-minimization principle to produce a conservative approximation of the original problem. The conservative formulation is relaxed by incorporating slack variables and a penalized objective. We solve the penalized tractable approximation using a provably convergent algorithm with polynomial complexity. Our results highlight that, despite being conservative, the proposed solution results in a similar power consumption as for the nominal power minimization problem without channel uncertainties. Additionally, robust H-NOMA is shown to almost always yield more power efficiency than the OMA case. Moreover, the robustness of the proposed solution is manifested by a high probability of feasibility of the robust design compared to the OMA and the nominal one.

cs.IT↗

arXiv2025

Cell-Free Massive MIMO-Assisted SWIPT for IoT Networks

This paper studies cell-free massive multiple-input multiple-output (CF-mMIMO) systems that underpin simultaneous wireless information and power transfer (SWIPT) for separate information users (IUs) and energy users (EUs) in Internet of Things (IoT) networks. We propose a joint access point (AP) operation mode selection and power control design, wherein certain APs are designated for energy transmission to EUs, while others are dedicated to information transmission to IUs. The performance of the system, from both a spectral efficiency (SE) and energy efficiency (EE) perspective, is comprehensively analyzed. Specifically, we formulate two mixed-integer nonconvex optimization problems for maximizing the average sum-SE and EE, under realistic power consumption models and constraints on the minimum individual SE requirements for individual IUs, minimum HE for individual EUs, and maximum transmit power at each AP. The challenging optimization problems are solved using successive convex approximation (SCA) techniques. The proposed framework design is further applied to the average sum-HE maximization and energy harvesting fairness problems. Our numerical results demonstrate that the proposed joint AP operation mode selection and power control algorithm can achieve EE performance gains of up to $4$-fold and $5$-fold over random AP operation mode selection, with and without power control respectively.

cs.IT↗

arXiv2025

A Transformer-based Multimodal Fusion Model for Efficient Crowd Counting Using Visual and Wireless Signals

Current crowd-counting models often rely on single-modal inputs, such as visual images or wireless signal data, which can result in significant information loss and suboptimal recognition performance. To address these shortcomings, we propose TransFusion, a novel multimodal fusion-based crowd-counting model that integrates Channel State Information (CSI) with image data. By leveraging the powerful capabilities of Transformer networks, TransFusion effectively combines these two distinct data modalities, enabling the capture of comprehensive global contextual information that is critical for accurate crowd estimation. However, while transformers are well capable of capturing global features, they potentially fail to identify finer-grained, local details essential for precise crowd counting. To mitigate this, we incorporate Convolutional Neural Networks (CNNs) into the model architecture, enhancing its ability to extract detailed local features that complement the global context provided by the Transformer. Extensive experimental evaluations demonstrate that TransFusion achieves high accuracy with minimal counting errors while maintaining superior efficiency.

cs.CV↗

arXiv2025

ProFi-Net: Prototype-based Feature Attention with Curriculum Augmentation for WiFi-based Gesture Recognition

This paper presents ProFi-Net, a novel few-shot learning framework for WiFi-based gesture recognition that overcomes the challenges of limited training data and sparse feature representations. ProFi-Net employs a prototype-based metric learning architecture enhanced with a feature-level attention mechanism, which dynamically refines the Euclidean distance by emphasizing the most discriminative feature dimensions. Additionally, our approach introduces a curriculum-inspired data augmentation strategy exclusively on the query set. By progressively incorporating Gaussian noise of increasing magnitude, the model is exposed to a broader range of challenging variations, thereby improving its generalization and robustness to overfitting. Extensive experiments conducted across diverse real-world environments demonstrate that ProFi-Net significantly outperforms conventional prototype networks and other state-of-the-art few-shot learning methods in terms of classification accuracy and training efficiency.

cs.LG↗

arXiv2025

Power-Efficient Deceptive Wireless Beamforming Against Eavesdroppers

Eavesdroppers of wireless signals want to infer as much as possible regarding the transmitter (Tx). Popular methods to minimize information leakage to the eavesdropper include covert communication, directional modulation, and beamforming with nulling. In this paper we do not attempt to prevent information leakage to the eavesdropper like the previous methods. Instead we propose to beamform the wireless signal at the Tx in such a way that it incorporates deceptive information. The beamformed orthogonal frequency division multiplexing (OFDM) signal includes a deceptive value for the Doppler (velocity) and range of the Tx. To design the optimal baseband waveform with these characteristics, we define and solve an optimization problem for power-efficient deceptive wireless beamforming (DWB). The relaxed convex Quadratic Program (QP) is solved using a heuristic algorithm. Our simulation results indicate that our DWB scheme can successfully inject deceptive information with low power consumption, while preserving the shape of the created beam.

eess.SP↗

arXiv2025

RIS-Aided Monitoring With Cooperative Jamming: Design and Performance Analysis

We investigate a reconfigurable intelligent surface (RIS) aided wireless surveillance system. In this system, a monitor not only receives signal from suspicious transmitter via a RIS-enhanced legitimate surveillance (LS) link but also simultaneously takes control of multiple jammers to degrade the quality of received suspicious signal. Under this setup, to enhance monitoring performance requires improvements of both the received signal quality at the monitor and the cooperative jamming (CJ). Considering that the surveillance system is aided by one RIS, whose phase shift optimization involves both channel state information (CSI) of the LS and CJ links, we utilize partial CSI to alleviate the CSI acquisition burden in our design. We propose two RIS-aided monitoring schemes with optimal jammer selection (OJS), and derive their closed-form expressions of surveillance success probability (SSP), respectively. Furthermore, we consider RIS-aided monitoring schemes with random jammer selection as corresponding benchmarks. Thereafter, we analyze special cases where the jammers are using power control to avoid being found, making it appears like passive monitoring. Also, the effect of RIS is highlighted by considering asymptotically large number of RIS elements. Numerical results verify that the proposed OJS strategy further enhances the RIS-aided monitoring performance compared with non-jammer-selection RISLR and RISCR schemes, where the superiority comes at the cost of CSI knowledge and becomes marginal in the region of high jamming power. In addition, the RISLO shows surveillance performance advantage overRISCOwhen the suspicious power is low or when the number of RIS elements is large.

eess.SY↗

arXiv2024

On the Joint Beamforming Design for Large-scale Downlink RIS-assisted Multiuser MIMO Systems

Reconfigurable intelligent surfaces (RISs) have huge potential to improve spectral and energy efficiency in future wireless systems at a minimal cost. However, early prototype results indicate that deploying hundreds or thousands of reflective elements is necessary for significant performance gains. Motivated by this, our study focuses on \emph{large-scale } RIS-assisted multi-user (MU) multiple-input multiple-output (MIMO) systems. In this context, we propose an efficient algorithm to jointly design the precoders at the base station (BS) and the phase shifts at the RIS to maximize the weighted sum rate (WSR). In particular, leveraging an equivalent lower-dimensional reformulation of the WSR maximization problem, we derive a closed-form solution to optimize the precoders using the successive convex approximation (SCA) framework. While the equivalent reformulation proves to be efficient for the precoder optimization, we offer numerical insights into why the original formulation of the WSR optimization problem is better suited for the phase shift optimization. Subsequently, we develop a scaled projected gradient method (SPGM) and a novel line search procedure to optimize RIS phase shifts. Notably, we show that the complexity of the proposed method \emph{scales linearly with the number of BS antennas and RIS reflective elements}. Extensive numerical experiments demonstrate that the proposed algorithm significantly reduces both time and computational complexity while achieving higher WSR compared to baseline algorithms.

eess.SP↗

arXiv2024

On the Sum Secrecy Rate Maximisation for Wireless Vehicular Networks

Wireless communications form the backbone of future vehicular networks, playing a critical role in applications ranging from traffic control to vehicular road safety. However, the dynamic structure of these networks creates security vulnerabilities, making security considerations an integral part of network design. We address these security concerns from a physical layer security aspect by investigating achievable secrecy rates in wireless vehicular networks. Specifically, we aim to maximize the sum secrecy rate from all vehicular pairs subject to bandwidth and power resource constraints. For the considered problem, we first propose a solution based on the successive convex approximation (SCA) method, which has not been applied in this context before. To further reduce the complexity of the SCA-based method, we also propose a low-complexity solution based on a fast iterative shrinkage-thresholding algorithm (FISTA). Our simulation results for SCA and FISTA show a trade-off between convergence and runtime. While the SCA method achieves better convergence, the FISTA-based approach is at least 300 times faster than the SCA method.

eess.SY↗