arXiv subjects

Lea Bischof

Publications and source records attributed to Lea Bischof.

4 recordsLinked to original sources

arXiv2025

Demonstrating sub-picometer non-reciprocity levels in the Three-Backlink Experiment for LISA

The current planned space-based gravitational-wave detectors require a bidirectional optical connection, referred to as Backlink, between two adjacent optical benches to provide a mutual phase reference for the local interferometric measurements. However, if the Backlink shows asymmetry between the two propagation directions, the effective optical pathlengths of the counter-propagating beams can introduce a differential phase noise, called non-reciprocity, into the main interferometric measurement that will limit the achievable accuracy in time-delay interferometry (TDI) post-processing. Hence, it is important to understand the properties of the Backlink to ensure that it will not compromise the interferometric detection. The Three-Backlink Experiment (3BL), which consists of an optical test facility with two rotatable benches, was designed under the Laser Interferometer Space Antenna (LISA) framework to study the performance of three Backlink configurations: two fiber-based and one free-beam scheme. In this paper, we report recent experimental results from the 3BL. We describe the commissioning and the subsequent noise mitigation. We achieve a setup noise floor below $1\text{ pm}\sqrt{\text{Hz}}$ across most of the LISA measurement band, and provide an understanding of the current technical limitations. With this low-noise baseline, we measured the performance of the three Backlink implementations under non-rotational conditions. We show that all three Backlinks reach sub-picometer non-reciprocity levels across most of the frequency band, with the remaining part dominated by the mentioned testbed noise. This enabled us to conduct a preliminary study of the Backlink inherent noise, where we emphasized on the backscatter noise intrinsic to a straightforward fiber-based Backlink, as this is the current baseline for LISA.

physics.optics↗

arXiv2025

Construction techniques and commissioning of the Three-Backlink Experiment for the LISA mission

Designed to detect gravitational waves in the lower-frequency band, the space mission LISA will open a new window to astronomy after its launch in the 2030s. Each LISA spacecraft houses two optical benches that require the exchange of a phase reference between them via an optical connection, called a Backlink. Here we present the construction and commissioning of an ultra-stable quasi-monolithic optical testbed to investigate different Backlink implementations: a direct fiber, a frequency-separated fiber, and a free-beam link, compared in the Three-Backlink Experiment. Dedicated alignment techniques crucial for the construction of these optical benches are presented together with the development of a high-precision beam alignment and measurement tool - a Calibrated Quadrant Photodiode Singleton. An upper limit for the performance of all three investigated Backlink schemes, as determined by initial experiments, can be set at a $15\text{pm}/\sqrt{\text{Hz}}$-equivalent level within the LISA band, spanning 0.1mHz to 1Hz. Our measurements were able to verify the successful construction and commissioning of this very complex interferometer as an interferometric laboratory testbed for LISA. We find no limitations due to the construction on the here reported performance levels. Our results can support the construction of high-precision metrology testbeds for space-based laser interferometry for future gravitational wave or geodesy missions.

physics.optics↗

arXiv2020

LION :Laser Interferometer On the mooN

Gravitational wave astronomy has now left its infancy and has become an important tool for probing the most violent phenomena in our universe. The LIGO/Virgo-KAGRA collaboration operates ground based detectors which cover the frequency band from 10 Hz to the kHz regime, meanwhile the pulsar timing array and the soon to launch LISA mission will cover frequencies below 0.1 Hz, leaving a gap in detectable gravitational wave frequencies. Here we show how a Laser Interferometer On the mooN (LION) gravitational wave detector would be sensitive to frequencies from sub Hz to kHz. We find that the sensitivity curve is such that LION can measure compact binaries with masses between 10 and 100M at cosmological distances, with redshifts as high as z= 100 and beyond, depending on the spin and the mass ratio of the binaries. LION can detect binaries of compact objects with higher-masses, with very large signal-to-noise ratios, help us tounderstand how supermassive black holes got their colossal masses on the cosmological landscape, and it can observe in detail intermediate-mass ratio inspirals at distances as large as at least 100 Gpc. Compact binaries that never reach the LIGO/Virgo sensitivity band can spend significantamounts of time in the LION band, while sources present in the LISA band can be picked up by the detector and observed until their final merger. Since LION covers the deci-Hertz regime with such large signal-to-noise ratios, it truly achieves the dream of multi messenger astronomy

astro-ph.IM↗

arXiv2018

Towards the LISA Backlink: Experiment design for comparing optical phase reference distribution systems

LISA is a proposed space-based laser interferometer detecting gravitational waves by measuring distances between free-floating test masses housed in three satellites in a triangular constellation with laser links in-between. Each satellite contains two optical benches that are articulated by moving optical subassemblies for compensating the breathing angle in the constellation. The phase reference distribution system, also known as backlink, forms an optical bi-directional path between the intra-satellite benches. In this work we discuss phase reference implementations with a target non-reciprocity of at most $2π\,\mathrm{μrad/\sqrt{Hz}}$, equivalent to $1\,\mathrm{pm/\sqrt{Hz}}$ for a wavelength of $1064\,\mathrm{nm}$ in the frequency band from $0.1\,\mathrm{mHz}$ to $1\,\mathrm{Hz}$. One phase reference uses a steered free beam connection, the other one a fiber together with additional laser frequencies. The noise characteristics of these implementations will be compared in a single interferometric set-up with a previously successfully tested direct fiber connection. We show the design of this interferometer created by optical simulations including ghost beam analysis, component alignment and noise estimation. First experimental results of a free beam laser link between two optical set-ups that are co-rotating by $\pm 1^\circ$ are presented. This experiment demonstrates sufficient thermal stability during rotation of less than $10^{-4}\,\mathrm{K/\sqrt{Hz}}$ at $1\,\mathrm{mHz}$ and operation of the free beam steering mirror control over more than 1 week.

physics.ins-det↗