Searcharxiv⌕ Search

arXiv subjects

Leanne P. Guy

Publications and source records attributed to Leanne P. Guy.

18 recordsLinked to original sources

The Cross-Survey Decade: A Call to Action

By 2027, three flagship wide-field surveys will be operating simultaneously from ground and space, observing overlapping sky and representing more than $6 billion in US and European public investment. Together they will produce overlapping petabyte-scale datasets across thousands of square degrees. This is a different class of challenge: the observations are no longer the bottleneck; realizing their joint scientific return now depends on shared computational infrastructure and coordination. Decades of community studies show that combining these datasets does more than improve precision. For science ranging from weak lensing to transient discovery and Galactic-plane astronomy, joint processing and analysis can unlock capabilities no single survey provides alone. Yet the required infrastructure -- joint pixel-level processing, cross-calibration and validation, interoperable data access, and the people to build and sustain it -- falls outside any single mission or institution's mandate. We issue a call to action for cross-survey science infrastructure, built around four pillars: (1) joint pixel-level processing and validation; (2) an AI-ready data substrate for scientific foundation models; (3) standardized, interoperable data access across surveys, democratizing participation in astrophysical discovery; and (4) dedicated personnel and career pathways. We outline concrete steps for policymakers, agencies, observatories, universities, the research community, and philanthropy, and argue that the moment to act is now, while foundational technical choices can still be aligned at a fraction of the cost of reconciling them later.

astro-ph.IM↗

Development of a Retrieval-Augmented Generation Virtual Assistant for Enhanced Information Discovery at Rubin Observatory

The NSF-DOE Vera C. Rubin Observatory will generate petabytes of data through the Legacy Survey of Space and Time (LSST) over the next decade, enabling discoveries across a broad range of astrophysical fields. Alongside these data products, Rubin maintains a large but heterogeneous collection of supporting documentation, including operational guides, technical notes, and scientific papers. Because this material is distributed across multiple platforms and formats, staff and scientists often struggle to efficiently locate accurate, up-to-date information. Many resources also reside on internal systems, limiting the ability of general-purpose language models to provide reliable answers to Rubin-specific questions. To address these challenges, we explore the use of Retrieval Augmented Generation (RAG) to improve information discovery. We present a prototype RAG-based virtual assistant that delivers context-aware, factual, conversational access to Rubin's vast and heterogenous documentation ecosystem. The system integrates material from multiple sources and enables semantic search through a conversational interface, using Weaviate for embeddings, LangChain for query orchestration, and an OpenAI GPT model as the LLM backend. By grounding responses in domain-specific knowledge, the assistant reduces hallucinations, improves accuracy, and demonstrates the potential of RAG to enhance access to distributed knowledge, streamline workflows, and support effective use of LSST data products.

astro-ph.IM↗

Modeling of the diffuse background produced by the Vera C. Rubin Observatory M2 baffle scattered light

The Vera C. Rubin Observatory, with its unprecedented field of view and fast focal ratio, will survey the entire sky every 3.5 nights. This unique capacity requires dealing with off axis light that can produce stray light artefacts on the images. The secondary mirror (M2) baffle restricts the light that reaches the LSSTCam detector and it contributes to shaping the inner edge of the telescope optical pupil. This work studies the contribution to the background from the light scattered by the M2 baffle itself. The evanescence of this feature, together with the challenge of isolating it from the sky background, led to the necessity of performing in dome tests using a Collimated Beam Projector (CBP), normally used for calibration purposes. To complete the analysis, in addition to the in dome tests, an on sky observational campaign was conducted. This campaign employed both stellar targets and the Moon as illumination sources in order to determine the actual energy associated with the feature. The test data have been retro fitted thanks to the combination of ray tracing simulation, CBP and on sky data to infer the intensity and spatial distribution of the background scattered light within the different LSSTCam filters. We quantified the on sky impact of scattered light from the M2 baffle, both for light coming from bright and red stars and from the Moon. We also developed an approximate relation to transform the in dome measurements into predictions of on sky behavior. This transformation was achieved by comparing the illumination footprint produced by an off axis star with that generated by the CBP and by mapping the stellar Spectral Energy Distribution (SED) onto the CBP's set of discrete wavelengths. Finally, we extrapolated the scattered light behavior of the Moon to stellar sources, in order to build a compplete description of the M2 baffle contribution over the full range of magnitudes.

astro-ph.IM↗

The Rubin Observatory Target-of-Opportunity System in the First Year of Operations

The NSF/DOE Vera C. Rubin Observatory is a discovery machine, with unprecedented survey speed, which can be used to identify exotic astrophysical transients. In its prime mission, the ten year Legacy Survey of Space and Time will use 3% of its total time for Target of Opportunity observations, which includes response to gravitational wave events, high energy neutrinos, potentially-hazardous asteroids, and other astrophysical phenomena. Target of Opportunity observations exist outside of the usual LSST operational mode, requiring special attention to maximize performance. We review the Rubin Target of Opportunity system during its first year of Rubin Observatory operations, the Targets of Opportunity pursued since LSST first light, and the overall efficiency of the system.

astro-ph.IM↗

Enabling Early Transient Discovery in LSST via Difference Imaging with DECam

We present SLIDE, a pipeline that enables transient discovery in data from the Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST), using archival images from the Dark Energy Camera (DECam) as templates for difference imaging. We apply this pipeline to the recently released Data Preview 1 (DP1; the first public release of Rubin commissioning data) and search for transients in the resulting difference images. The image subtraction, photometry extraction, and transient detection are all performed on the Rubin Science Platform. We demonstrate that SLIDE effectively extracts clean photometry by circumventing poor or missing LSST templates. We identified 29 previously unreported transients, 12 of which would not have been detected based on the DP1 DiaObject catalog. SLIDE will be especially useful for transient analysis in the early years of LSST, when template coverage will be largely incomplete or when templates may be contaminated by transients present at the time of acquisition. We present multiband light curves for a sample of known transients, along with new transient candidates identified through our search. Finally, we discuss the prospects of applying this pipeline during the main LSST survey. Our pipeline is broadly applicable and will support studies of all transients with slowly evolving phases.

astro-ph.HE↗

Identification and photometric classification of extragalactic transients in the Vera C. Rubin Observatory's Data Preview 1

The Vera C. Rubin Observatory will soon survey the southern sky, delivering a depth and sky coverage that is unprecedented in time domain astronomy. As part of commissioning, Data Preview 1 (DP1) has been released. It comprises a LSSTComCam observing campaign between November and December 2024 with multi-band imaging of seven fields, covering roughly 0.4 square degrees each, providing a first glimpse into the data products that will become available once the Legacy Survey of Space and Time begins. In this work, we search three fields for extragalactic transients. We identify eight new likely supernovae, and three known ones from a sample of 369,644 difference image analysis objects. Photometric classification using Superphot+ assigns sub-classes with >95% confidence to only one SN Ia and one SN II in this sample. Our findings are in agreement with supernova detection rate predictions of $15\pm4$ supernovae from simulations using simsurvey. The supernova detection rate in the data is possibly affected by the lack of suitable templates. Nevertheless, this work demonstrates the quality of the data products delivered in DP1 and indicates that the Rubin Observatory's Legacy Survey of Space and Time (LSST) is well placed to fulfill its discovery potential in time domain astronomy.

astro-ph.HE↗

Variability-finding in Rubin Data Preview 1 with LSDB

The Vera C. Rubin Observatory recently released Data Preview 1 (DP1) in advance of the upcoming Legacy Survey of Space and Time (LSST), which will enable boundless discoveries in time-domain astronomy over the next ten years. DP1 provides an ideal sandbox for validating innovative data analysis approaches for the LSST mission, whose scale challenges established software infrastructure paradigms. This note presents a pair of such pipelines for variability-finding using powerful software infrastructure suited to LSST data, namely the HATS (Hierarchical Adaptive Tiling Scheme) format and the LSDB framework, developed by the LSST Interdisciplinary Network for Collaboration and Computing (LINCC) Frameworks team. This article presents a pair of variability-finding pipelines built on LSDB, the HATS catalog of DP1 data, and preliminary results of detected variable objects, two of which are novel discoveries.

astro-ph.IM↗

Rubin ToO 2024: Envisioning the Vera C. Rubin Observatory LSST Target of Opportunity program

The Legacy Survey of Space and Time (LSST) at Vera C. Rubin Observatory is planned to begin in the Fall of 2025. The LSST survey cadence has been designed via a community-driven process regulated by the Survey Cadence Optimization Committee (SCOC), which recommended up to 3% of the observing time to carry out Target of Opportunity (ToO) observations. Experts from the scientific community, Rubin Observatory personnel, and members of the SCOC were brought together to deliver a recommendation for the implementation of the ToO program during a workshop held in March 2024. Four main science cases were identified: gravitational wave multi-messenger astronomy, high energy neutrinos, Galactic supernovae, and small potentially hazardous asteroids possible impactors. Additional science cases were identified and briefly addressed in the documents, including lensed or poorly localized gamma-ray bursts and twilight discoveries. Trigger prioritization, automated response, and detailed strategies were discussed for each science case. This document represents the outcome of the Rubin ToO 2024 workshop, with additional contributions from members of the Rubin Science Collaborations. The implementation of the selection criteria and strategies presented in this document has been endorsed in the SCOC Phase 3 Recommendations document (PSTN-056). Although the ToO program is still to be finalized, this document serves as a baseline plan for ToO observations with the Rubin Observatory.

astro-ph.IM↗

Software Architecture and System Design of Rubin Observatory

Starting from a description of the Rubin Observatory Data Management System Architecture, and drawing on our experience with and involvement in a range of other projects including Gaia, SDSS, UKIRT, and JCMT, we derive a series of generic design patterns and lessons learned.

astro-ph.IM↗

Rubin-Euclid Derived Data Products: Initial Recommendations

This report is the result of a joint discussion between the Rubin and Euclid scientific communities. The work presented in this report was focused on designing and recommending an initial set of Derived Data products (DDPs) that could realize the science goals enabled by joint processing. All interested Rubin and Euclid data rights holders were invited to contribute via an online discussion forum and a series of virtual meetings. Strong interest in enhancing science with joint DDPs emerged from across a wide range of astrophysical domains: Solar System, the Galaxy, the Local Volume, from the nearby to the primaeval Universe, and cosmology.

astro-ph.IM↗

From Data to Software to Science with the Rubin Observatory LSST

The Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) dataset will dramatically alter our understanding of the Universe, from the origins of the Solar System to the nature of dark matter and dark energy. Much of this research will depend on the existence of robust, tested, and scalable algorithms, software, and services. Identifying and developing such tools ahead of time has the potential to significantly accelerate the delivery of early science from LSST. Developing these collaboratively, and making them broadly available, can enable more inclusive and equitable collaboration on LSST science. To facilitate such opportunities, a community workshop entitled "From Data to Software to Science with the Rubin Observatory LSST" was organized by the LSST Interdisciplinary Network for Collaboration and Computing (LINCC) and partners, and held at the Flatiron Institute in New York, March 28-30th 2022. The workshop included over 50 in-person attendees invited from over 300 applications. It identified seven key software areas of need: (i) scalable cross-matching and distributed joining of catalogs, (ii) robust photometric redshift determination, (iii) software for determination of selection functions, (iv) frameworks for scalable time-series analyses, (v) services for image access and reprocessing at scale, (vi) object image access (cutouts) and analysis at scale, and (vii) scalable job execution systems. This white paper summarizes the discussions of this workshop. It considers the motivating science use cases, identified cross-cutting algorithms, software, and services, their high-level technical specifications, and the principles of inclusive collaborations needed to develop them. We provide it as a useful roadmap of needs, as well as to spur action and collaboration between groups and individuals looking to develop reusable software for early LSST science.

astro-ph.IM↗

Faro: A framework for measuring the scientific performance of petascale Rubin Observatory data products

The Vera C. Rubin Observatory will advance many areas of astronomy over the next decade with its unique wide-fast-deep multi-color imaging survey, the Legacy Survey of Space and Time (LSST). The LSST will produce approximately 20TB of raw data per night, which will be automatically processed by the LSST Science Pipelines to generate science-ready data products -- processed images, catalogs and alerts. To ensure that these data products enable transformative science with LSST, stringent requirements have been placed on their quality and scientific fidelity, for example on image quality and depth, astrometric and photometric performance, and object recovery completeness. In this paper we introduce faro, a framework for automatically and efficiently computing scientific performance metrics on the LSST data products for units of data of varying granularity, ranging from single-detector to full-survey summary statistics. By measuring and monitoring metrics, we are able to evaluate trends in algorithmic performance and conduct regression testing during development, compare the performance of one algorithm against another, and verify that the LSST data products will meet performance requirements by comparing to specifications. We present initial results using faro to characterize the performance of the data products produced on simulated and precursor data sets, and discuss plans to use faro to verify the performance of the LSST commissioning data products.

astro-ph.IM↗

Rubin Science Platform on Google: the story so far

We describe Rubin Observatory's experience with offering a data access facility (and associated services including our Science Platform) deployed on Google Cloud infrastructure as part of our pre-Operations Data Preview program.

astro-ph.IM↗

An Overview of the LSST Image Processing Pipelines

The Large Synoptic Survey Telescope (LSST) is an ambitious astronomical survey with a similarly ambitious Data Management component. Data Management for LSST includes processing on both nightly and yearly cadences to generate transient alerts, deep catalogs of the static sky, and forced photometry light-curves for billions of objects at hundreds of epochs, spanning at least a decade. The algorithms running in these pipelines are individually sophisticated and interact in subtle ways. This paper provides an overview of those pipelines, focusing more on those interactions than the details of any individual algorithm.

astro-ph.IM↗

All-sky RR Lyrae Stars in the Gaia Data

The second Gaia data release is expected to contain data products from about 22 months of observation. Based on these data, we aim to provide an advance publication of a full-sky Gaia map of RR Lyrae stars. Although comprehensive, these data still contain a significant fraction of sources which are insufficiently sampled for Fourier series decomposition of the periodic light variations. The challenges in the identification of RR Lyrae candidates with (much) fewer than 20 field-of-view transits are described. General considerations of the results, their limitations, and interpretation are presented together with prospects for improvement in subsequent Gaia data releases.

astro-ph.SR↗

Pulsating star research and the Gaia revolution

In this article we present an overview of the ESA Gaia mission and of the unprecedented impact that Gaia will have on the field of variable star research. We summarise the contents and impact of the first Gaia data release on the description of variability phenomena, with particular emphasis on pulsating star research. The Tycho-Gaia astrometric solution, although limited to 2.1 million stars, has been used in many studies related to pulsating stars. Furthermore a set of 3,194 Cepheids and RR Lyrae stars with their times series have been released. Finally we present the plans for the ongoing study of variable phenomena with Gaia and highlight some of the possible impacts of the second data release on variable, and specifically, pulsating stars.

astro-ph.SR↗

Crossmatching variable objects with the Gaia data

Tens of millions of new variable objects are expected to be identified in over a billion time series from the Gaia mission. Crossmatching known variable sources with those from Gaia is crucial to incorporate current knowledge, understand how these objects appear in the Gaia data, train supervised classifiers to recognise known classes, and validate the results of the Variability Processing and Analysis Coordination Unit (CU7) within the Gaia Data Analysis and Processing Consortium (DPAC). The method employed by CU7 to crossmatch variables for the first Gaia data release includes a binary classifier to take into account positional uncertainties, proper motion, targeted variability signals, and artefacts present in the early calibration of the Gaia data. Crossmatching with a classifier makes it possible to automate all those decisions which are typically made during visual inspection. The classifier can be trained with objects characterized by a variety of attributes to ensure similarity in multiple dimensions (astrometry, photometry, time-series features), with no need for a-priori transformations to compare different photometric bands, or of predictive models of the motion of objects to compare positions. Other advantages as well as some disadvantages of the method are discussed. Implementation steps from the training to the assessment of the crossmatch classifier and selection of results are described.

astro-ph.IM↗

A comparative study of four significance measures for periodicity detection in astronomical surveys

We study the problem of periodicity detection in massive data sets of photometric or radial velocity time series, as presented by ESA's Gaia mission. Periodicity detection hinges on the estimation of the false alarm probability (FAP) of the extremum of the periodogram of the time series. We consider the problem of its estimation with two main issues in mind. First, for a given number of observations and signal-to-noise ratio, the rate of correct periodicity detections should be constant for all realized cadences of observations regardless of the observational time patterns, in order to avoid sky biases that are difficult to assess. Second, the computational loads should be kept feasible even for millions of time series. Using the Gaia case, we compare the $F^M$ method (Paltani 2004, Schwarzenberg-Czerny 2012), the Baluev method (Baluev 2008) and the GEV method (Süveges 2014), as well as a method for the direct estimation of a threshold. Three methods involve some unknown parameters, which are obtained by fitting a regression-type predictive model using easily obtainable covariates derived from observational time series. We conclude that the GEV and the Baluev methods both provide good solutions to the issues posed by a large-scale processing. The first of these yields the best scientific quality at the price of some moderately costly pre-processing. When this pre-processing is impossible for some reason (e.g. the computational costs are prohibitive or good regression models cannot be constructed), the Baluev method provides a computationally inexpensive alternative with slight biases in regions where time samplings exhibit strong aliases.

astro-ph.IM↗