arXiv subjects

Leeor Kronik

Publications and source records attributed to Leeor Kronik.

At least 19 recordsLinked to original sources

arXiv2026

Square Net TaSiAs Nanowires with Topological Surface Conduction and Linear Magnetoresistance

Square-net topological materials exhibit various interesting properties arising from the interplay of their structural diversity, topologically protected bands and different possible electronic features, including intrinsic magnetic ordering and superconductivity. However, little is known about the low-dimensional structures of these materials and their properties. Realization of low-dimensional topological square-net materials has the potential of enabling enhancement of their quantum behavior arising from quasi-compact 1D geometry and high surface-to-volume ratio, and their integration into functional devices. This work reports on the synthesis and properties of high-quality, single-crystal nanowires of Si square-net material TaSiAs. The chemical-vapor-transport produces TaSiAs nanowires that are chemically encapsulated with a thin dielectric shell of SiO2, enabling remarkable ambient stability and a pristine surface, which are critical for observing robust topologically protected surface states. Atomic-resolution structural analysis reveals a sharp core-shell interface, and a Si square-net lattice extending along the nanowire axis. These chemically protected nanowires allowed us to observe rich electrical and magnetotransport features, including 4 to 11 times lower room-temperature resistivity than the closest bulk analogues and non-saturating linear magnetoresistance, revealing topologically protected coherent surface transport. First-principles calculations show a wide-range (4 eV) linear band dispersion, alongside different Dirac cones that are protected by either symmorphic (C4) or non-symmorphic symmetries, predicting transport features consistent with our results. The findings demonstrate the unique properties of low-dimensional square-net topological materials and their potential applications, including next-generation interconnects, spintronic devices and quantum computing.

cond-mat.mtrl-sci↗

arXiv2026

Thermal Fundamental Gap Predictions in DFT via Optimally Tuned Hybrids

Predicting electronic fundamental gaps at finite temperature has remained conceptually and practically challenging. We address this in three connected steps. First, we extend generalized Kohn--Sham hybrid density functional theory to thermal ensembles, deriving a Mermin generalized Kohn--Sham framework from a thermal one-particle auxiliary system and an exact density-functional remainder. Second, via an extension of Janak's theorem that holds rigorously in this framework, we recast Hirata's thermal-quasiparticle picture as a thermal orbital gap estimator and derive a closed low-temperature form, the error of which is controlled by the derivative discontinuity. Third, because optimal tuning eliminates this error, the auxiliary orbital gap matches the interacting gap at low temperature, upgrading optimal tuning from a ground-state strategy to the governing principle -- mandatory, not optional -- for accurate finite-temperature gap predictions obtained from gaps of orbital eigenvalues within a hybrid functional framework. We present applications that validate the theory and demonstrate its consequences.

physics.chem-ph↗

arXiv2026

Chiral Epitaxy: Enantioselective Growth of Chiral Nanowires on Low-Symmetry Two-Dimensional Materials

Chiral crystals exhibit useful handedness-dependent properties, including spin selectivity and circularly polarized light sensitivity, yet controlling which enantiomer forms during synthesis remains a central challenge. Existing approaches utilize molecules in solution to template crystal growth, which restricts processing conditions and introduces organic contaminants incompatible with device fabrication. Enantioselective growth of a chiral crystal on a chiral surface via vapor-phase synthesis (chiral epitaxy) has not yet been demonstrated. Here, we show chiral epitaxy of aligned tellurium nanowires on a low-symmetry two-dimensional material, ReSe2. In situ electron microscopies suggest a mechanism where handedness is determined at nucleation by the interface energy difference between Te enantiomers and the chiral substrate surface. Chiral epitaxy provides a solvent-free, vapor-solid route to homochiral crystals compatible with semiconductor and quantum manufacturing processes.

cond-mat.mtrl-sci↗

arXiv2025

Automated Workflow for Non-Empirical Wannier-Localized Optimal Tuning of Range-Separated Hybrid Functionals

We introduce an automated workflow for generating non-empirical Wannier-localized optimally-tuned screened range-separated hybrid (WOT-SRSH) functionals. WOT-SRSH functionals have been shown to yield highly accurate fundamental band gaps, band structures, and optical spectra for bulk and 2D semiconductors and insulators. Our workflow automatically and efficiently determines the WOT-SRSH functional parameters for a given crystal structure and composition, approximately enforcing the correct screened long-range Coulomb interaction and an ionization potential ansatz. In contrast to previous manual tuning approaches, our tuning procedure relies on a new search algorithm that only requires a few hybrid functional calculations with minimal user input. We demonstrate our workflow on 23 previously studied semiconductors and insulators, reporting the same high level of accuracy. By automating the tuning process and improving its computational efficiency, the approach outlined here enables applications of the WOT-SRSH functional to compute spectroscopic and optoelectronic properties for a wide range of materials.

cond-mat.mtrl-sci↗

arXiv2025

"Ensemblization" of density functional theory

Density functional theory (DFT) has transformed our ability to investigate and understand electronic ground states. In its original formulation, however, DFT is not suited to addressing (e.g.) degenerate ground states, mixed states with different particle numbers, or excited states. All these issues can be handled, in principle exactly, via ensemble DFT (EDFT). This Perspective provides a detailed introduction to and analysis of EDFT, in an in-principle exact framework that is constructed to avoid uncontrolled errors and inconsistencies that may be associated with {\it ad hoc} extensions of conventional DFT. In particular, it focuses on the "ensemblization" of both exact and approximate density functionals, a term we coin to describe a rigorous approach that lends itself to the construction of novel approximations consistent with the general ensemble framework, yet applicable to practical problems where traditional DFT tends to fail or does not apply at all. Specifically, symmetry considerations and ensemble properties are shown to enable each other in shaping a practical DFT-based methodology that extends beyond the ground state and, in doing so, highlights the need to look outside the standard ground state Kohn-Sham treatment.

physics.chem-ph↗

arXiv2025

Foundations of the ionization potential condition for localized electron removal in density functional theory

Optimal tuning of functional parameters in density functional theory approximations, based on enforcing the ionization potential theorem, has emerged as the method of choice for the non-empirical prediction of the electronic structure of finite systems. This method has recently been extended to the bulk limit, based on an ansatz that generalizes the ionization potential theorem to the removal of an electron from a localized Wannier orbital. This Wannier-localization based optimal tuning method has been shown to be highly successful for a wide range of periodic systems, accurately predicting electronic and optical properties. However, a rigorous theoretical justification for its foundational ansatz has been lacking. Here, we establish an ionization potential condition for the removal of a localized electron, by extending the piecewise linearity and Janak's theorems in density functional theory. We also provide numerical evidence supporting our theory.

physics.chem-ph↗

arXiv2025

Machine-Learning Force Fields Reveal Shallow Electronic States on Dynamic Halide Perovskite Surfaces

The spectacular performance of halide perovskites in optoelectronic devices is rooted in their tolerance to defects. Previous studies showed that defects in these materials generate shallow electronic states. However, how these shallow states persist amid the pronounced atomic dynamics on halide perovskite surfaces remains unknown. This work reveals that electronic states at surfaces of prototypical CsPbBr$_3$ are energetically distributed at room temperature akin to well-passivated inorganic semiconductors, even when covalent bonds remain cleaved and undercoordinated. Specifically, a striking tendency for shallow surface states is found with approximately 70% of surface-state energies appearing within 0.2 eV or ${\approx}8k_\text{B}T$ from the valence-band edge. While these findings do not rule out occurrence of deep traps per se, they show that even when surface states appear deeper in the gap, they are not energetically isolated and are less likely to act as traps. We achieve this result by accelerating first-principles calculations via machine learning and show that the unique atomic dynamics in these materials render the formation of deep electronic states at their surfaces unlikely. These findings reveal the microscopic mechanism behind the low density of deep states at dynamic halide perovskite surfaces, which is key to their device performance.

cond-mat.mtrl-sci↗

arXiv2025

Microscopic theory of phonon polaritons and long wavelength dielectric response

We present a first-principles approach for calculating phonon-polariton dispersion relations. In this approach, phonon-photon interaction is described by quantization of a Hamiltonian that describes harmonic lattice vibrations coupled with the electromagnetic field inside the material. All Hamiltonian parameters are obtained from first-principles calculations, with diagonalization leading to non-interacting polariton quasiparticles. This method naturally includes retardation effects and resolves non-analytical behavior and ambiguities in phonon frequencies at the Brillouin zone center, especially in non-cubic and optically anisotropic materials. Furthermore, by incorporating higher-order terms in the Hamiltonian, we also account for quasiparticle interactions and spectral broadening. Specifically, we show how anharmonic effects in phonon polaritons lead to a dielectric response that challenges traditional models. The accuracy and consequences of the approach are demonstrated on GaP and GaN as harmonic test systems and PbTe and $\beta$-Ga$_2$O$_3$ as anharmonic test systems.

cond-mat.mtrl-sci↗

arXiv2025

The reliability of hybrid functionals for accurate fundamental and optical gap prediction of bulk solids and surfaces

Hybrid functionals have been considered insufficiently reliable for the prediction of band gaps in solids and surfaces. We revisit this issue with a new generation of optimally-tuned range-separated hybrid functionals, focusing on the reconstructed Si(111)-(2x1) and Ge(111)-(2x1) surfaces. We show that certain hybrid functionals can accurately predict the surface-state and bulk fundamental and optical gaps, as well as projected band structures of these surfaces, by combining ground-state and time-dependent density functional theory.

cond-mat.mtrl-sci↗

arXiv2025

Accurate Point Defect Energy Levels from Non-Empirical Screened Range-Separated Hybrid Functionals: the Case of Native Vacancies in ZnO

We use density functional theory (DFT) with non-empirically tuned screened range-separated hybrid (SRSH) functionals to calculate the electronic properties of native zinc and oxygen vacancy point defects in ZnO, and we predict their defect levels for thermal and optical transitions in excellent agreement with available experiments and prior calculations that use empirical hybrid functionals. The ability of this non-empirical first-principles framework to accurately predict quantities of relevance to both bulk and defect level spectroscopy enables high-accuracy DFT calculations with non-empirical hybrid functionals for defect physics, at a reduced computational cost.

cond-mat.mtrl-sci↗

arXiv2025

Resolving Contradictory Estimates of Band Gaps of Bulk PdSe$_2$: A Wannier-Localized Optimally-Tuned Screened Range-Separated Hybrid Density Functional Theory Study

Palladium diselenide (PdSe$_2$) -- a layered van der Waals material -- is attracting significant attention for optoelectronics due to the wide tunability of its band gap from the infrared through the visible range as a function of the number of layers. However, there continues to be disagreement over the precise nature and value of the optical band gap of bulk PdSe$_2$, owing to the rather small value of this gap that complicates experimental measurements and their interpretation. Here, we design and employ a Wannier-localized optimally-tuned screened range-separated hybrid (WOT-SRSH) functional to investigate the electronic bandstructures and optical absorption spectra of bulk and monolayer PdSe$_2$. In particular, we account carefully for the finite exciton center-of-mass momentum within a time-dependent WOT-SRSH framework to calculate the \emph{indirect} optical gap and absorption onset accurately. Our results agree well with the best available photoconductivity measurements, as well as with state-of-the-art many-body perturbation theory calculations, confirming that bulk PdSe$_2$ has an optical gap in the mid-infrared (upper-bound of 0.44 eV). More generally, this work further bolsters the utility of the WOT-SRSH approach for predictive modeling of layered semiconductors.

cond-mat.mtrl-sci↗

arXiv2024

State-specific density functionals for excited states from ensembles

We present a first principles strategy for developing state-specific density functional approximations for excited states. We first clarify why approaches based on conventional ground state approximations miss density-driven correlations, by considering excited state physics through the lens of ensemble density functional theory. To solve this issue we gain insights on density driven correlations by exploiting the recently understood low-density limit of electrons in excited states. The theory developments are then combined to produce a proof-of-concept excited state approximation that resolves urgent paradigmatic failures (double excitations, charge transfer excitations, piecewise linearity) of existing state-of-art density-functional approaches, directly from differences of self-consistent field calculations; i.e., $Δ$SCF. In light of its observed impressive performance, we conclude that the approach represents a major step toward unified and accurate modelling of neutral and charged excitations.

physics.chem-ph↗

arXiv2024

Electronic structure and optical properties of halide double perovskites from a Wannier-localized optimally-tuned screened range-separated hybrid functional

Halide double perovskites are a chemically-diverse and growing class of compound semiconductors that are promising for optoelectronic applications. However, the prediction of their fundamental gaps and optical properties with density functional theory (DFT) and {\it ab initio} many-body perturbation theory has been a significant challenge. Recently, a nonempirical Wannier-localized optimally-tuned screened range-separated hybrid (WOT-SRSH) functional has been shown to accurately produce the fundamental band gaps of a wide set of semiconductors and insulators, including lead halide perovskites. Here we apply the WOT-SRSH functional to five halide double perovskites, and compare the results with those obtained from other known functionals and previous $GW$ calculations. We also use the approach as a starting point for $GW$ calculations and we compute the band structures and optical absorption spectrum for Cs\textsubscript{2}Ag{Bi}Br\textsubscript{6}, using both time-dependent DFT and the $GW$-Bethe-Salpeter equation approach. We show that the WOT-SRSH functional leads to accurate fundamental and optical band gaps, as well as optical absorption spectra, consistent with spectroscopic measurements, thereby establishing WOT-SRSH as a viable method for the accurate prediction of optoelectronic properties of halide double perovskites.

cond-mat.mtrl-sci↗

arXiv2024

Polarization Saturation in Multi-layered Interfacial Ferroelectrics

Van der Waals (vdW) polytypes of broken inversion and mirror symmetries were recently shown to exhibit switchable electric polarization even at the ultimate two-layer thin limit. Their out-of-plane polarization was found to accumulate in a ladder-like fashion with each successive layer, offering 2D building blocks for the bottom-up construction of 3D ferroelectrics. Here, we demonstrate experimentally that beyond a critical stack thickness, the accumulated polarization in rhombohedral polytypes of molybdenum disulfide (r-MoS2) saturates. The underlying saturation mechanism, deciphered via DFT and self-consistent Poisson-Schrödinger calculations, point to a purely electronic redistribution involving: (1) polarization-induced bandgap closure that allows for cross-stack charge transfer and the emergence of free surface charge; (2) reduction of the polarization saturation value, as well as the critical thickness at which it is obtained, by the presence of free carriers. The resilience of polar layered structures to atomic surface reconstruction, which is essentially unavoidable in polar 3D crystals, potentially allows for the design of new devices with mobile surface charges. Our findings, which are of general nature, should be accounted for when designing switching and/or conductive devices based on ferroelectric layered materials.

cond-mat.mtrl-sci↗

arXiv2024

Electronic and Optical Excitations in van der Waals Materials from a Non-Empirical Wannier-Localized Optimally-Tuned Screened Range-Separated Hybrid Functional

Accurate prediction of electronic and optical excitations in van der Waals (vdW) materials is a long-standing challenge for density functional theory. The recently proposed Wannier-localized optimally-tuned screened range-separated hybrid (WOT-SRSH) functional has proven successful in non-empirical determination of electronic band gaps and optical absorption spectra for various covalent and ionic crystals. However, for vdW materials the tuning of the material- and structure-dependent functional parameters has, until now, only been attained semi-empirically. Here, we present a non-empirical WOT-SRSH approach applicable to vdW materials, with the optimal functional parameters transferable between monolayer and bulk. We apply this methodology to prototypical vdW materials: black phosphorus, molybdenum disulfide, and hexagonal boron nitride (in the latter case including zero-point renormalization). We show that the WOT-SRSH approach consistently achieves accuracy levels comparable to experiments and ab initio many-body perturbation theory (MBPT) calculations for band structures and optical absorption spectra, both on its own and as an optimal starting point for MBPT calculations.

cond-mat.mtrl-sci↗

arXiv2024

Non-empirical prediction of the length-dependent ionization potential in molecular chains

The ionization potential of molecular chains is well-known to be a tunable nano-scale property that exhibits clear quantum confinement effects. State-of-the-art methods can accurately predict the ionization potential in the small molecule limit and in the solid-state limit, but for intermediate, nano-sized systems prediction of the evolution of the electronic structure between the two limits is more difficult. Recently, optimal tuning of range-separated hybrid functionals has emerged as a highly accurate method for predicting ionization potentials. This was first achieved for molecules using the ionization potential theorem (IPT) and more recently extended to solid-state systems, based on an \textit{ansatz} that generalizes the IPT to the removal of charge from a localized Wannier function. Here, we study one-dimensional molecular chains of increasing size, from the monomer limit to the infinite polymer limit using this approach. By comparing our results with other localization-based methods and where available with experiment, we demonstrate that Wannier-localization-based optimal tuning is highly accurate in predicting ionization potentials for any chain length, including the nano-scale regime.

physics.chem-ph↗

arXiv2023

Optical absorption spectra of metal oxides from time-dependent density functional theory and many-body perturbation theory based on optimally-tuned hybrid functionals

Using both time-dependent density functional theory (TDDFT) and the ``single-shot" $GW$ plus Bethe-Salpeter equation ($GW$-BSE) approach, we compute optical band gaps and optical absorption spectra from first principles for eight common binary and ternary closed-shell metal oxides (MgO, Al$_2$O$_3$, CaO, TiO$_2$, Cu$_2$O, ZnO, BaSnO$_3$, and BiVO$_4$), based on the non-empirical Wannier-localized optimally-tuned screened range-separated hybrid functional. Overall, we find excellent agreement between our TDDFT and $GW$-BSE results and experiment, with a mean absolute error less than 0.4 eV, including for Cu$_2$O and ZnO, traditionally considered to be challenging for both methods.

cond-mat.mtrl-sci↗

arXiv2023

Anisotropic Interlayer Force Field for Group-VI Transition Metal Dichalcogenides

An anisotropic interlayer force field that describes the interlayer interactions in homogeneous and heterogeneous interfaces of group-VI transition metal dichalcogenides (MX2 where M = Mo, W and X = S, Se) is presented. The force field is benchmarked against density functional theory calculations for bilayer systems within the Heyd-Scuseria-Ernzerhof hybrid density functional approximation, augmented by a nonlocal many-body dispersion treatment of long-range correlation. The parametrization yields good agreement with reference calculations of binding energy curves and sliding potential energy surfaces. It is found to be transferable to TMD junctions outside the training set that contain the same atom types. Calculated bulk moduli agree with most previous dispersion corrected DFT predictions, which underestimate available experimental values. Calculated phonon spectra of the various junctions under consideration demonstrate the importance of appropriately treating the anisotropic nature of layered interfaces. Considering our previous parameterization for MoS2, the interlayer potential enables accurate and efficient large-scale simulations of the dynamical, tribological, and thermal transport properties of a large set of homogeneous and heterogeneous TMD interfaces.

cond-mat.mtrl-sci↗