arXiv subjects

Lei Kang

Publications and source records attributed to Lei Kang.

49 records · Page 3Linked to original sources

arXiv2021

Role of Interlayer Coupling in the Second Harmonic Generation of Bilayer Transition-metal Dichalcogenides

Little is known about the role of weak interlayer coupling in the second harmonic generation (SHG) effects of two-dimensional van der Waals (vdW) systems. In this article, taking homo-bilayer $MoS_2/MoS_2$ and hetero-bilayer $MoS_2/MoSe_2$ as typical examples, we have systemically investigated their SHG susceptibilities as a function of interlayer hopping strength using first-principles calculations. For the SHG at zero frequency limit of both $MoS_2/MoS_2$ and $MoS_2/MoSe_2$, although the increase of tint can increase the intensities of interlayer optical transitions (IOT), the increased band repulsion around G point can eventually decrease their SHG values; the larger the tint, the smaller the SHG response. For the SHG spectra of $MoS_2/MoSe_2$ in the low photon-energy region, opposite to the $MoS_2/MoS_2$, their peak values are very sensitive to the variable tint, due to the strong $t_{int}$-dependent IOT dominating in the band edge; the larger the tint, the larger the SHG. For the SHG of $MoS_2/MoS_2$ in the high photon-energy region, comparing to the $MoS_2/MoSe_2$, their peak values will decrease in a much more noticeable way as the $t_{int}$ increases, due to the larger reduction of band nesting effect. Our study not only can successfully explain the puzzling experimental observations for the different SHG responses in different bilayer transition-metal dichalcogenides under variable tint, but also may provide a general understanding for designing controllable the SHG effects in the vdW systems.

physics.comp-ph↗

arXiv2021

Alloy Engineering of Polar (Si,Ge)2N2O System for Controllable Second Harmonic Performance

Although silicon oxynitrides are important semiconductors for many practical applications, their potential second-order nonlinear optical (NLO) applications, regardless of balanced or controllable performance, have never been systemically explored. Using the first-principles calculations, in this article, we discover that the sinoite (i.e., typical silicon oxynitride Si2N2O) can simultaneously exhibit wide optical bandgap, strong second-harmonic generation (SHG) effect, and large birefringence, which are further confirmed by our preliminary experimental data. Importantly, we propose that alloying engineering can be further applied to control the balanced NLO properties in the Si2N2O system. Combining first-principles calculations and cluster expansion theory, we demonstrate that alloying Ge into Si2N2O can easily form low formation energy Si2(1-x)Ge2xN2O alloys, which can in turn achieve controllable phase-matching harmonic output with high SHG efficiency at different energy ranges. Therefore, alloy engineering could provide a unique approach to effectively control the balanced NLO performance of Si2(1-x)Ge2xN2O, making this polar alloy system holding potential applications in tunable laser frequency conversion and controllable all-optical devices.

cond-mat.mtrl-sci↗

arXiv2020

Predicting Berborite as Potential Deep-Ultraviolet Nonlinear Optical Crystal from First Principles

Following our ab initio nonlinear optical (NLO) materials design guidelines, in this Letter, we discovered a novel type of structure to realize potential deep-ultraviolet (DUV) NLO performance in the classical beryllium borate system. By densely stacking the NLO-active layered frameworks, the key design scheme for the structural evolution from the (Be2BO3F2) layers in KBe2BO3F2 (KBBF) to the novel (Be2BO5H3) layers in berborite is illustrated. Based on available experimental results and systematical theoretical evaluation from first principles, the NLO properties of berborite are further obtained as comparable as the only pratical DUV NLO crystal KBBF. It is demonstrated that berborite can achieve available DUV phase-matched output with strong NLO effect for the practically important 177.3 nm and 193.7 nm lasers. Once obtained with sizable single crystal, it can be applied as a promising DUV NLO crystal.

cond-mat.mtrl-sci↗

arXiv2020

Deep-ultraviolet Layered Oxide B2S2O9 with Strong and Robust Second Harmonic Generation

Two-dimensional (2D) layered semiconductors with both ultrawide bandgap and strong second harmonic generation (SHG) are essential for expanding the nonlinear optical (NLO) applications to deep-ultraviolet (DUV) region in nanoscale. Unfortunately, these materials are rare in nature and have not been discovered until now. In this Letter, we predict the B2S2O9 (BSO), an existing layered oxide, can exhibit both DUV bandgap and strong SHG effects, comparable to the best known DUV NLO bulks. The strong SHG intensities in BSO, originated from the ordered arrangement of polar SO4 and BO4 tetrahedra forming planar structure, are linearly tunable by the layer thickness. Surprisingly, the spontaneous rotations of rigid tetrahedra under strains can induce the (nearly) zero Poisson's ratios in BSO, which simultaneously result in the robust SHG effects against large strains, fundamentally differing from other known 2D NLO semiconductors. The discovery of BSO may provide an unprecedented opportunity to explore DUV NLO physics and applications in 2D limit.

cond-mat.mes-hall↗

arXiv2020

Second Harmonic Generation of MoSi2N4 Layer

The recently discovered two-dimensional (2D) layered semiconductor MoSi2N4 has aroused great interest due to its unique 2D material characteristics. In this Letter, we found that differences in the structural details for MoSi2N4 may lead to differences in the intensity of second harmonic generation (SHG) and its response to strain. Accordingly, SHG can be used as a simple technique to identify the structural details of this system. We further calculated the SHG effects of MoSi2N4 derivatives and investigated their strain-regulation mechanism, especially including the anomalous SHG responses under strain for MoSi2P4 and MoGe2P4, differing from other known 2D materials. The studies may have forward-looking significance for the research of nonlinear optics and optoelectronics in this novel 2D material system.

cond-mat.mes-hall↗

arXiv2020

GANwriting: Content-Conditioned Generation of Styled Handwritten Word Images

Although current image generation methods have reached impressive quality levels, they are still unable to produce plausible yet diverse images of handwritten words. On the contrary, when writing by hand, a great variability is observed across different writers, and even when analyzing words scribbled by the same individual, involuntary variations are conspicuous. In this work, we take a step closer to producing realistic and varied artificially rendered handwritten words. We propose a novel method that is able to produce credible handwritten word images by conditioning the generative process with both calligraphic style features and textual content. Our generator is guided by three complementary learning objectives: to produce realistic images, to imitate a certain handwriting style and to convey a specific textual content. Our model is unconstrained to any predefined vocabulary, being able to render whatever input word. Given a sample writer, it is also able to mimic its calligraphic features in a few-shot setup. We significantly advance over prior art and demonstrate with qualitative, quantitative and human-based evaluations the realistic aspect of our synthetically produced images.

cs.CV↗

arXiv2020

Pay Attention to What You Read: Non-recurrent Handwritten Text-Line Recognition

The advent of recurrent neural networks for handwriting recognition marked an important milestone reaching impressive recognition accuracies despite the great variability that we observe across different writing styles. Sequential architectures are a perfect fit to model text lines, not only because of the inherent temporal aspect of text, but also to learn probability distributions over sequences of characters and words. However, using such recurrent paradigms comes at a cost at training stage, since their sequential pipelines prevent parallelization. In this work, we introduce a non-recurrent approach to recognize handwritten text by the use of transformer models. We propose a novel method that bypasses any recurrence. By using multi-head self-attention layers both at the visual and textual stages, we are able to tackle character recognition as well as to learn language-related dependencies of the character sequences to be decoded. Our model is unconstrained to any predefined vocabulary, being able to recognize out-of-vocabulary words, i.e. words that do not appear in the training vocabulary. We significantly advance over prior art and demonstrate that satisfactory recognition accuracies are yielded even in few-shot learning scenarios.

cs.CV↗

arXiv2020

Unsupervised Adaptation for Synthetic-to-Real Handwritten Word Recognition

Handwritten Text Recognition (HTR) is still a challenging problem because it must deal with two important difficulties: the variability among writing styles, and the scarcity of labelled data. To alleviate such problems, synthetic data generation and data augmentation are typically used to train HTR systems. However, training with such data produces encouraging but still inaccurate transcriptions in real words. In this paper, we propose an unsupervised writer adaptation approach that is able to automatically adjust a generic handwritten word recognizer, fully trained with synthetic fonts, towards a new incoming writer. We have experimentally validated our proposal using five different datasets, covering several challenges (i) the document source: modern and historic samples, which may involve paper degradation problems; (ii) different handwriting styles: single and multiple writer collections; and (iii) language, which involves different character combinations. Across these challenging collections, we show that our system is able to maintain its performance, thus, it provides a practical and generic approach to deal with new document collections without requiring any expensive and tedious manual annotation step.

cs.CV↗

arXiv2019

Candidate Fusion: Integrating Language Modelling into a Sequence-to-Sequence Handwritten Word Recognition Architecture

Sequence-to-sequence models have recently become very popular for tackling handwritten word recognition problems. However, how to effectively integrate an external language model into such recognizer is still a challenging problem. The main challenge faced when training a language model is to deal with the language model corpus which is usually different to the one used for training the handwritten word recognition system. Thus, the bias between both word corpora leads to incorrectness on the transcriptions, providing similar or even worse performances on the recognition task. In this work, we introduce Candidate Fusion, a novel way to integrate an external language model to a sequence-to-sequence architecture. Moreover, it provides suggestions from an external language knowledge, as a new input to the sequence-to-sequence recognizer. Hence, Candidate Fusion provides two improvements. On the one hand, the sequence-to-sequence recognizer has the flexibility not only to combine the information from itself and the language model, but also to choose the importance of the information provided by the language model. On the other hand, the external language model has the ability to adapt itself to the training corpus and even learn the most commonly errors produced from the recognizer. Finally, by conducting comprehensive experiments, the Candidate Fusion proves to outperform the state-of-the-art language models for handwritten word recognition tasks.

cs.CV↗

arXiv2019

Chiral Balls: Knotted Structures with Both Chirality and Three-dimensional Rotational Symmetry

Knots have been put forward to explain various physical phenomena because of their topological stability. Nevertheless, few works have reported on the exotic symmetry properties that certain knots possess. Here we reveal an exceptional form of symmetry for a family of knots that are both chiral and three-dimensional (3-D) rotationally symmetric about every axis of a standard Cartesian coordinate system. We call these unique knotted structures chiral balls. To demonstrate the unprecedented physical characteristics exhibited by these unique structures, we study the electromagnetic scattering properties of a representative conductive chiral ball. In particular, a characteristic mode analysis is performed to investigate the intrinsic scattering properties of this chiral ball. With both chirality and 3-D rotational symmetry, the chiral ball is shown to exhibit an extraordinary isotropic circularly polarized scattering property, which has not been previously reported for any known electromagnetic structures. Because of their unique properties, chiral balls are expected to not only have a profound impact on the fields of electromagnetics and optics but also far beyond.

physics.class-ph↗

arXiv2019

A Knotted Meta-molecule with 2-D Isotropic Optical Activity Rotating the Incident Polarization by 90°

Optical activity is the ability of chiral materials to rotate linearly-polarized (LP) electromagnetic waves. Because of their intrinsic asymmetry, traditional chiral molecules usually lack isotropic performance, or at best only possess a weak form of chirality. Here we introduce a knotted chiral meta-molecule that exhibits optical activity corresponding to a 90° polarization rotation of the incident waves. More importantly, arising from the continuous multi-fold rotational symmetry of the chiral torus knot structure, the observed polarization rotation behavior is found to be independent of how the incident wave is polarized. In other words, the proposed chiral knot structure possesses two-dimensional (2-D) isotropic optical activity as illustrated in Fig. 1, which has been experimentally validated in the microwave spectrum. The proposed chiral torus knot represents the most optically active meta-molecule reported to date that is intrinsically isotropic to the incident polarization.

physics.class-ph↗

arXiv2019

Giant Enhancement of Solid Solubility in Monolayer BNC Alloys by Selective Orbital Coupling

Solid solubility (SS) is one of the most important features of alloys, which is usually difficult to be largely tuned in the entire alloy concentrations by external approaches. Some alloys that were supposed to have promising physical properties could turn out to be much less useful because of their poor SS, e.g., the case for monolayer BNC [(BN)1-x(C2)x] alloys. Until now, an effective approach on significantly enhancing SS of (BN)1-x(C2)x in the entire x is still lacking. In this article, a novel mechanism of selective orbital coupling between high energy wrong-bond states and surface states mediated by the specific substrate has been proposed to stabilize the wrong-bonds and in turn significantly enhance the SS of (BN)1-x(C2)x alloys. Surprisingly, we demonstrate that five ordered alloys, exhibiting variable direct quasi-particle bandgaps from 1.35 to 3.99 eV, can spontaneously be formed at different x when (BN)1-x(C2)x is grown on hcp-phase Cr. Interestingly, the optical transitions around the band edges in these ordered alloys, accompanied by largely tunable exciton binding energies of ~1 eV at different x, are significantly strong due to their unique band structures. Importantly, the disordered (BN)1-x(C2)x alloys, exhibiting fully tunable bandgaps from 0 to ~6 eV in the entire x, can be formed on Cr substrate at the miscibility temperature of ~1200 K, which is greatly reduced compared to that of 4500~5600 K in free-standing form or on other substrates. Our discovery not only may resolve the long-standing SS problem of BNC alloys, but also could significantly extend the applications of BNC alloys for various optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2010

Negative refraction at deep-ultraviolet frequency in monocrystalline graphite

Negative refraction is such a prominent electromagnetic phenomenon that most researchers believe it can only occur in artificially engineered metamaterials. In this article, we report negative refraction for all incident angles for the first time in a naturally existing material. Using ellipsometry measurement of the equifrequency contour in the deep-ultraviolet frequency region (typically 254 nm), obvious negative refraction was demonstrated in monocrystalline graphite for incident angles ranging from 20o to 70o. This negative refraction is attributed to extremely strong anisotropy in the crystal structure of graphite, which gives the crystal indefinite permeability. This result not only explores a new route to identifying natural negative-index materials, but it also holds promise for the development of an ultraviolet hyperlens, which may lead to a breakthrough in nanolithography, the most critical technology necessary for the next generation of electronics.

cond-mat.mtrl-sci↗