arXiv subjects

Leigh Norris

Publications and source records attributed to Leigh Norris.

6 recordsLinked to original sources

arXiv2026

Revealing Noise in Axial Motion Through Quantum Noise Spectroscopy on a Trapped Ion Processor

Native noise processes in quantum processors are often difficult to isolate because multiple error mechanisms contribute to the same measured loss of coherence. Here we use dephasing-robust quantum noise spectroscopy to identify and characterize control noise induced by axial motion in an individually-addressed trapped-ion processor. When the ion motion is transverse to the addressing beam, thermal axial motion couples to the beam profile and produces effective amplitude control noise. We show that this noise is governed primarily by the local beam curvature and appears as a low-frequency contribution to the reconstructed control-noise spectrum. By varying the ion position within the beam profile, we separate curvature-dependent axial-motion noise from curvature-independent native control noise and extract motional parameters that are otherwise difficult to access on this platform. We also apply the protocol in parallel to a four-ion register, demonstrating a spectroscopic method for simultaneous characterization of position-dependent control noise across multiple qubits. The results of this study identify beam inflection points as operating regions that suppress axial-motion-induced noise at the cost of reduced Rabi rate, as found in PRX Quantum 3, 010334 (2022).

quant-ph↗

arXiv2026

Assessing Spatiotemporally Correlated Noise in Superconducting Qubits via Pulse-Based Quantum Noise Spectroscopy

Spatiotemporally correlated errors are widespread in quantum devices and are particularly adversarial to error correcting schemes. To characterize these errors, we propose and validate a nonparametric quantum noise spectroscopy (QNS) protocol to estimate both spectra and static errors associated with spatiotemporally correlated dephasing noise and fluctuating quantum crosstalk on two qubits. Our scheme reconstructs the real and imaginary components of the two-qubit cross-spectrum by using fixed total time pulse sequences and single qubit and joint two-qubit measurements to separately resolve spatially correlated noise processes. We benchmark our protocol by reconstructing the spectra of spatiotemporally correlated noise processes engineered via the Schrödinger Wave Autoregressive Moving Average technique, emulating dephasing errors. Furthermore, we show that the protocol can outperform existing comb-based QNS protocols. Our results demonstrate the utility of our protocol in characterizing spatiotemporally correlated noise and quantum crosstalk in a multi-qubit device for potential use in noise-adapted control or error protection schemes.

quant-ph↗

arXiv2026

Performance limits of a quantum receiver for detecting phase-modulated communication signals

Quantum sensors are an ideal candidate for detecting weak electromagnetic signals because of their exceptional sensitivity and compact form factor. In this work, we analyze the performance of a quantum-sensor-based receive chain for demodulating information encoded in phase-modulated electromagnetic waves. We introduce a generalized cumulant expansion to model a noisy quantum receiver and use it to compare the performance of various quantum demodulation protocols. Employing bit error probability (BEP) and channel capacity as quantitative performance metrics, we compare the capabilities of ensembles of quantum sensors - both unentangled and entangled - using Binary Phase-Shift Keying (BPSK) as a representative example of phase modulation. We identify conditions when the channel capacity of an ensemble of quantum sensors may surpass the limits of a classical electrically small antenna. Additionally, we discuss modifications to the quantum protocol that enables high-fidelity data recovery even in the presence of sensor noise and channel distortions. Finally, we explore practical performance limits of such a quantum receive chain, with a focus on NV-diamond as the quantum sensor platform.

quant-ph↗

arXiv2025

Characterizing Superconducting Qubits using Averaged Circuit Eigenvalue Sampling

Efficient characterization of noise during quantum gate operations is an essential step to building and scaling up a quantum computer. One such protocol is averaged circuit eigenvalue sampling (ACES) which efficiently characterizes a noisy gate set by reconstructing a Pauli noise model for a each gate. Here we utilize the ACES protocol to characterize two coupled superconducting qubits. For accurate reconstruction, we tailor the noise via Pauli twirling and account for measurement errors. We verify the accuracy of the protocol by comparing the predicted gate fidelities to that extracted from conventional benchmarking approaches, such as interleaved randomized benchmarking. Furthermore, we demonstrate the efficacy of ACES in accurately identifying specific noise sources by reconstructing injected phase errors in the two-qubit gates.

quant-ph↗

arXiv2024

Sparse Non-Markovian Noise Modeling of Transmon-Based Multi-Qubit Operations

The influence of noise on quantum dynamics is one of the main factors preventing current quantum processors from performing accurate quantum computations. Sufficient noise characterization and modeling can provide key insights into the effect of noise on quantum algorithms and inform the design of targeted error protection protocols. However, constructing effective noise models that are sparse in model parameters, yet predictive can be challenging. In this work, we present an approach for effective noise modeling of multi-qubit operations on transmon-based devices. Through a comprehensive characterization of seven devices offered by the IBM Quantum Platform, we show that the model can capture and predict a wide range of single- and two-qubit behaviors, including non-Markovian effects resulting from spatio-temporally correlated noise sources. The model's predictive power is further highlighted through multi-qubit dynamical decoupling demonstrations and an implementation of the variational quantum eigensolver. As a training proxy for the hardware, we show that the model can predict expectation values within a relative error of 0.5%; this is a 7$\times$ improvement over default hardware noise models. Through these demonstrations, we highlight key error sources in superconducting qubits and illustrate the utility of reduced noise models for predicting hardware dynamics.

quant-ph↗

arXiv2022

Provably Optimal Control for Multiplicative Amplitude Control Noise

We provide a technique to obtain provably optimal control sequences for quantum systems under the influence of time-correlated multiplicative control noise. Utilizing the circuit-level noise model introduced in [Phys. Rev. Research 3, 033229(2021)], we show that we can map the problem of finding such a sequence to a convex optimization problem with guaranteed optimality that follows from the convexity. We also show that this technique is compatible with more general off-axis time-correlated dephasing noise. In spite of losing provable optimality, numerically optimized control sequences under this scenario can still achieve nearly optimal performance when the control noise is strong relative to the dephasing contribution. This approach will enable the development of optimal quantum logic gates in systems where noise due to amplitude drifts in the control is strong relative to dephasing such as in ion-trap based quantum computers or in the limit of fast control.

quant-ph↗