Searcharxiv⌕ Search

arXiv subjects

Lennart Blanken

Publications and source records attributed to Lennart Blanken.

12 recordsLinked to original sources
arXiv2025

Performance Analysis of Multirate Systems: A Direct Frequency-Domain Identification Approach

Frequency-domain performance analysis of intersample behavior in sampled-data and multirate systems is challenging due to the lack of a frequency-separation principle, and systematic identification techniques are lacking. The aim of this \manuscript is to develop an efficient technique for identifying the full intersample performance in the frequency-domain for closed-loop multirate systems, in particular the Performance Frequency Gain (PFG). Through local modeling techniques, aliased frequency components are effectively disentangled when identifying the PFG, which is directly facilitated by frequency-lifting the multirate system to a multivariable time-invariant representation. The developed method accurately and directly identifies the PFG in a single identification experiment. Finally, the developed method is experimentally validated on a prototype motion system, showing accurate identification of frequency-domain representations for the multirate system, including the PFG.

eess.SY↗
arXiv2025

Parameter-Varying Feedforward Control: A Kernel-Based Learning Approach

The increasing demands for high accuracy in mechatronic systems necessitate the incorporation of parameter variations in feedforward control. The aim of this paper is to develop a data-driven approach for direct learning of parameter-varying feedforward control to increase tracking performance. The developed approach is based on kernel-regularized function estimation in conjunction with iterative learning to directly learn parameter-varying feedforward control from data. This approach enables high tracking performance for feedforward control of linear parameter-varying dynamics, providing flexibility to varying reference tasks. The developed framework is validated on a benchmark industrial experimental setup featuring a belt-driven carriage.

eess.SY↗
arXiv2025

Self-Calibrating Position Measurements: Applied to Imperfect Hall Sensors

Linear Hall sensors are a cost-effective alternative to optical encoders for measuring the rotor positions of actuators, with the main challenge being that they exhibit position-dependent inaccuracies resulting from manufacturing tolerances. This paper develops a data-driven calibration procedure for linear analog Hall sensors that enables accurate online estimates of the rotor angle without requiring expensive external encoders. The approach combines closed-loop data collection with nonlinear identification to obtain an accurate model of the sensor inaccuracies, which is subsequently used for online compensation. Simulation results show that when the flux density model structure is known, measurement errors are reduced to the sensor noise floor, and experiments on an industrial setup demonstrate a factor of 2.6 reduction in the root-mean-square measurement error. These results confirm that Hall sensor inaccuracies can be calibrated even when no external encoder is available, improving their practical applicability.

eess.SY↗
arXiv2025

Lifted Frequency-Domain Identification of Closed-Loop Multirate Systems: Applied to Dual-Stage Actuator Hard Disk Drives

Frequency-domain representations are crucial for the design and performance evaluation of controllers in multirate systems, specifically to address intersample performance. The aim of this paper is to develop an effective frequency-domain system identification technique for closed-loop multirate systems using solely slow-rate output measurements. By indirect identification of multivariable time-invariant representations through lifting, in combination with local modeling techniques, the multirate system is effectively identified. The developed method is capable of accurate identification of closed-loop multirate systems within a single identification experiment, using fast-rate excitation and inputs, and slow-rate outputs. Finally, the developed framework is validated using a benchmark problem consisting of a multivariable dual-stage actuator from a hard disk drive, demonstrating its applicability and accuracy.

eess.SY↗
arXiv2025

Local Rational Modeling for Identification Beyond the Nyquist Frequency: Applied to a Prototype Wafer Stage

Fast-rate models are essential for control design, specifically to address intersample behavior. The aim of this paper is to develop a frequency-domain non-parametric identification technique to estimate fast-rate models of systems that have relevant dynamics and allow for actuation above the Nyquist frequency of a slow-rate output. Examples of such systems include vision-in-the-loop systems. Through local rational models over multiple frequency bands, aliased components are effectively disentangled, particularly for lightly-damped systems. The developed technique accurately determines non-parametric fast-rate models of systems with slow-rate outputs, all within a single identification experiment. Finally, the effectiveness of the technique is demonstrated through experiments conducted on a prototype wafer stage used for semiconductor manufacturing.

eess.SY↗
arXiv2024

Bayesian grey-box identification of nonlinear convection effects in heat transfer dynamics

We propose a computational procedure for identifying convection in heat transfer dynamics. The procedure is based on a Gaussian process latent force model, consisting of a white-box component (i.e., known physics) for the conduction and linear convection effects and a Gaussian process that acts as a black-box component for the nonlinear convection effects. States are inferred through Bayesian smoothing and we obtain approximate posterior distributions for the kernel covariance function's hyperparameters using Laplace's method. The nonlinear convection function is recovered from the Gaussian process states using a Bayesian regression model. We validate the procedure by simulation error using the identified nonlinear convection function, on both data from a simulated system and measurements from a physical assembly.

eess.SY↗
arXiv2024

A Frequency-Domain Approach for Enhanced Performance and Task Flexibility in Finite-Time ILC

Iterative learning control (ILC) is capable of improving the tracking performance of repetitive control systems by utilizing data from past iterations. The aim of this paper is to achieve both task flexibility, which is often achieved by ILC with basis functions, and the performance of frequency-domain ILC, with an intuitive design procedure. The cost function of norm-optimal ILC is determined that recovers frequency-domain ILC, and consequently, the feedforward signal is parameterized in terms of basis functions and frequency-domain ILC. The resulting method has the performance and design procedure of frequency-domain ILC and the task flexibility of basis functions ILC, and are complimentary to each other. Validation on a benchmark example confirms the capabilities of the framework.

eess.SY↗
arXiv2023

Beyond Nyquist in Frequency Response Function Identification: Applied to Slow-Sampled Systems

Fast-sampled models are essential for control design, e.g., to address intersample behavior. The aim of this paper is to develop a non-parametric identification technique for fast-sampled models of systems that have relevant dynamics and actuation above the Nyquist frequency of the sensor, such as vision-in-the-loop systems. The developed method assumes smoothness of the frequency response function, which allows to disentangle aliased components through local models over multiple frequency bands. The method identifies fast-sampled models of slowly-sampled systems accurately in a single identification experiment. Finally, an experimental example demonstrates the effectiveness of the technique.

eess.SY↗
arXiv2023

A Kernel-Based Identification Approach to LPV Feedforward: With Application to Motion Systems

The increasing demands for motion control result in a situation where Linear Parameter-Varying (LPV) dynamics have to be taken into account. Inverse-model feedforward control for LPV motion systems is challenging, since the inverse of an LPV system is often dynamically dependent on the scheduling sequence. The aim of this paper is to develop an identification approach that directly identifies dynamically scheduled feedforward controllers for LPV motion systems from data. In this paper, the feedforward controller is parameterized in basis functions, similar to, e.g., mass-acceleration feedforward, and is identified by a kernel-based approach such that the parameter dependency for LPV motion systems is addressed. The resulting feedforward includes dynamic dependence and is learned accurately. The developed framework is validated on an example.

eess.SY↗
arXiv2022

Frequency Domain Identification of Multirate Systems: A Lifted Local Polynomial Modeling Approach

Frequency-domain representations of multirate systems are essential for controller design and performance evaluation of multirate systems and sampled-data control. The aim of this paper is to develop a time-efficient closed-loop identification approach for multirate systems in the frequency-domain. The developed method utilizes local polynomial modeling for lifted representations of LPTV systems, which enables direct identification of closed-loop multirate systems in a single identification experiment. Unlike LTI identification techniques, the developed method does not suffer from bias due to ignored LPTV dynamics. The developed approach is demonstrated on a multirate example, resulting in accurate and fast identification in the frequency domain.

eess.SY↗
arXiv2019

Multivariable Iterative Learning Control Design Procedures: from Decentralized to Centralized, Illustrated on an Industrial Printer

Iterative Learning Control (ILC) enables high control performance through learning from measured data, using only limited model knowledge in the form of a nominal parametric model. Robust stability requires robustness to modeling errors, often due to deliberate undermodeling. The aim of this paper is to develop a range of approaches for multivariable ILC, where specific attention is given to addressing interaction. The proposed methods either address the interaction in the nominal model, or as uncertainty, i.e., through robust stability. The result is a range of techniques, including the use of the structured singular value (SSV) and Gershgorin bounds, that provide a different trade-off between modeling requirements, i.e., modeling effort and cost, and achievable performance. This allows control engineers to select the approach that fits the modeling budget and control requirements. This trade-off is demonstrated in a case study on an industrial flatbed printer.

eess.SY↗