arXiv subjects

Leon Aslan

Publications and source records attributed to Leon Aslan.

5 recordsLinked to original sources

arXiv2026

Update on the slicer IFU for the Magellan InfraRed Multi-Object Spectrograph (MIRMOS)

The Magellan InfraRed Multi-Object Spectrograph (MIRMOS) is a planned next generation multi-object and integral field spectrograph for the 6.5m Magellan telescopes at Las Campanas Observatory in Chile. MIRMOS will perform $\rm R\sim3700$ spectroscopy over a simultaneous wavelength range of 0.886 - 2.404um (Y, J, H, K bands) in addition to imaging over the range of 0.7 - 0.886um. The integral field mode of operation for MIRMOS will be achieved via an image slicer style integral field unit (IFU) located on a linear stage to facilitate movement into the beam during use or storage while operating in multi-object mode. The IFU will provide an $\rm\sim18''\times26''$ field of view (FoV) made up of $\rm0.84''\times26''$ slices. This will be the largest FoV IFS operating at these wavelengths from either the ground or space, making MIRMOS an ideal instrument for a wide range of science cases including studying the high redshift circumgalactic medium and emission line tracers from ionized and molecular gas in nearby galaxies. We present here an update on the IFU design from our 2024 proceeding. Previously we utilized a re-imaging style slicer which required freeform pupil mirrors in order to achieve the required image quality while obeying significant packaging constraints near the instrument focal surface. In order to reduce the manufacturing cost and decouple the IFU from the configurable slit unit used in multi-object mode, we have moved the IFU deeper into the instrument, allowing for a switch to a virtual style IFU. This now requires a re-imaging doublet before the slicer mirrors, but removes the need for any freeform surfaces. We present here the optical design and predicted performance of the new MIRMOS IFU along with a conceptual design for the opto-mechanical system which will move the IFU between its active and stored positions.

astro-ph.IM↗

arXiv2026

Update on the Magellan InfraRed Multi-Object Spectrograph (MIRMOS)

The Magellan InfraRed Multi-Object Spectrograph (MIRMOS) will be a next generation multi-object (MOS) and integral field spectrograph (IFS) for the 6.5m Magellan telescopes at Las Campanas Observatory in Chile. MIRMOS will perform R~3700 spectroscopy over a simultaneous wavelength range of 0.886-2.404um (Y, J, H, and K bands) in addition to imaging over the range of 0.7-0.886um. Target selection in the MOS mode is achieved through a cryogenic mechanism capable of making up to 92 slits over a 13'x3' field of view (FoV). This mechanism can be reconfigured in real time to adjust slit widths for seeing conditions, change to a different mask, or form a long slit. The IFS mode of operation for MIRMOS will be achieved via an image slicer style integral field unit (IFU) which will provide an ~18"x26" FoV made up of 0.84"x26" slices. MIRMOS's design will allow it to address a wide range of science cases from performing spectroscopy of high-redshift galaxies as well as high signal-to-noise transmission spectroscopy of exoplanet atmospheres with the MOS/long slit mode, while also having the largest FoV IFS operating on a large telescope at these wavelengths. We will describe here the design of the MIRMOS instrument -- now at the end of the preliminary design phase.

astro-ph.IM↗

arXiv2024

A Precision Cryogenic Positioning Stage for Detector Dithering and Flexure Compensation

This paper presents the design and technical progress of a precision X-Y stage for detector dithering and flexure compensation. The stage is being developed for use in the Magellan InfraRed Multi-Object Spectrograph, MIRMOS. MIRMOS is a very large Nasmyth mounted spectrograph containing a combination of refractive, reflective and diffractive optics mounted on a long cryogenic optical bench. The instrument utilizes five science cameras, each having a custom x-y stage to control the in-plane detector position within each camera, providing both dithering capability for improved sampling, and flexure compensation to correct for image motion that results from the gravity variant operation of the instrument. Designed to operate at 120~K, the stage will accurately control detector position in two orthogonal degrees of freedom, and have manual fine adjustment features to set detector tip, tilt and piston. The piezo-driven flexure stage provides high-resolution backlash-free motion of the detector and is very compact along the optical path, keeping camera length to a minimum. A magnetoresistive bridge provides position feedback in each degree of freedom, greatly reducing hysteresis, which is common in piezoelectric actuators. The system is designed to operate in open loop using a lookup table keyed to the Nasmyth rotator angle for flexure control. Here, the optomechanical design of the stage, electrical control system, and current performance results from early prototype efforts are presented and discussed.

astro-ph.IM↗

arXiv2024

A Novel Freeform Slicer IFU for the Magellan InfraRed Multi-Object Spectrograph (MIRMOS)

The Magellan InfraRed Multi-Object Spectrograph (MIRMOS) is a planned next generation multi-object and integral field spectrograph for the 6.5m Magellan telescopes at Las Campanas Observatory in Chile. MIRMOS will perform R$\sim$3700 spectroscopy over a simultaneous wavelength range of 0.886 - 2.404$\mu$m (Y,J,H,K bands) in addition to imaging over the range of 0.7 - 0.886$\mu$m. The integral field mode of operation for MIRMOS will be achieved via an image slicer style integral field unit (IFU) located on a linear stage to facilitate movement into the beam during use or storage while operating in multi-object mode. The IFU will provide a $\rm \sim20"\times26"$ field of view (FoV) made up of $\rm0.84"\times26"$ slices. This will be the largest FoV IFS operating at these wavelengths from either the ground or space, making MIRMOS an ideal instrument for a wide range of science cases including studying the high redshift circumgalactic medium and emission line tracers from ionized and molecular gas in nearby galaxies. In order to achieve the desired image quality and FoV while matching the focal ratio to the multi-object mode, our slicer design makes use of novel freeform surfaces for the pupil mirrors, which require the use of high precision multi-axis diamond milling to manufacture. We present here the optical design and predicted performance of the MIRMOS IFU along with a conceptual design for the opto-mechanical system.

astro-ph.IM↗

arXiv2020

Development of the ROSIE Integral Field Unit on the Magellan IMACS Spectrograph

We are building an image slicer integral field unit (IFU) to go on the IMACS wide-field imaging spectrograph on the Magellan Baade Telescope at Las Campanas Observatory, the Reformatting Optically-Sensitive IMACS Enhancement IFU, or ROSIE IFU. The 50.4" x 53.5" field of view will be pre-sliced into four 12.6" x 53.5" subfields, and then each subfield will be divided into 21 0.6" x 53.5" slices. The four main image slicers will produce four pseudo-slits spaced six arcminutes apart across the IMACS f/2 camera field of view, providing a wavelength coverage of 1800 Angstroms at a spectral resolution of 2000. Optics are in-hand, the first image slicer is being aluminized, mounts are being designed and fabricated, and software is being written. This IFU will enable the efficient mapping of extended objects such as nebulae, galaxies, or outflows, making it a powerful addition to IMACS.

astro-ph.IM↗