arXiv subjects

Leonardo Del Bino

Publications and source records attributed to Leonardo Del Bino.

17 recordsLinked to original sources

arXiv2024

An All-Optical General-Purpose CPU and Optical Computer Architecture

Energy efficiency of electronic digital processors is primarily limited by the energy consumption of electronic communication and interconnects. The industry is almost unanimously pushing towards replacing both long-haul, as well as local chip interconnects, using optics to drastically increase efficiency. In this paper, we explore what comes after the successful migration to optical interconnects, as with this inefficiency solved, the main source of energy consumption will be electronic digital computing, memory and electro-optical conversion. Our approach attempts to address all these issues by introducing efficient all-optical digital computing and memory, which in turn eliminates the need for electro-optical conversions. Here, we demonstrate for the first time a scheme to enable general purpose digital data processing in an integrated form and present our photonic integrated circuit (PIC) implementation. For this demonstration we implemented a URISC architecture capable of running any classical piece of software all-optically and present a comprehensive architectural framework for all-optical computing to go beyond.

cs.ET↗

arXiv2022

Switching fronts, plateaus and Kerr oscillations of counterpropagating light in ring resonators

We characterise stationary fronts and dark solitons for counterpropagating waves in micro-ring and fibre resonators with two input fields, normal dispersion and nonlocal coupling. These features are different from those in systems with local coupling in that their existence and stability are due to a careful balance of the areas of offset from homogeneous solutions. When scanning one of the two cavity detunings, stable solutions formed plateaus separated by two fronts are present in one of the counter-propagating fields with the power of the other field being homogeneous. Two front plateau solutions have a one-to-one correspondence to solutions of a Lugiato-Lefever equation at the unique Maxwell point. By defining effective detunings and for fixed values of the input powers where the fronts are found, we determine expressions for both the Maxwell point and the distance of the stable fronts as functions of detunings and input powers of both fields in good agreement with numerical simulations. For certain values of the detunings we find multi-stable states of plateaus with fronts, oscillating homogeneous states and non-oscillating homogeneous states of the counter-propagating fields. Robustness and parameter ranges of these unusual dynamical states coexisting with stable non-homogeneous front solutions are provided.

physics.optics↗

arXiv2021

A Kerr Polarization Controller

Kerr-effect-induced changes of the polarization state of light are well known in pulsed laser systems. An example is nonlinear polarization rotation, which is critical to the operation of many types of mode-locked lasers. Here, we demonstrate that the Kerr effect in a high-finesse Fabry-Pérot resonator can be utilized to control the polarization of a continuous wave laser. It is shown that a linearly-polarized input field is converted into a left- or right-circularly-polarized field, controlled via the optical power. The observations are explained by Kerr-nonlinearity induced symmetry breaking, which splits the resonance frequencies of degenerate modes with opposite polarization handedness in an otherwise symmetric resonator. The all-optical polarization control is demonstrated at threshold powers down to 7 mW. The physical principle of such Kerr effect-based polarization controllers is generic to high-Q Kerr-nonlinear resonators and could also be implemented in photonic integrated circuits. Beyond polarization control, the spontaneous symmetry breaking of polarization states could be used for polarization filters or highly sensitive polarization sensors when operated close to the symmetry-breaking point.

physics.optics↗

arXiv2021

Kerr-Nonlinearity-Induced Mode-Splitting in Optical Microresonators

The Kerr effect in optical microresonators plays an important role for integrated photonic devices and enables third harmonic generation, four-wave mixing, and the generation of microresonator-based frequency combs. Here we experimentally demonstrate that the Kerr nonlinearity can split ultra-high-Q microresonator resonances for two continuous-wave lasers. The resonance splitting is induced by self- and cross-phase modulation and counter-intuitively enables two lasers at different wavelengths to be simultaneously resonant in the same microresonator mode. We develop a pump-probe spectroscopy scheme that allows us to measure power dependent resonance splittings of up to 35 cavity linewidths (corresponding to 52 MHz) at 10 mW of pump power. The required power to split the resonance by one cavity linewidth is only 286$μ$W. In addition, we demonstrate threefold resonance splitting when taking into account four-wave mixing and two counterpropagating probe lasers. These Kerr splittings are of interest for applications that require two resonances at optically controlled offsets, eg. for opto-mechanical coupling to phonon modes, optical memories, and precisely adjustable spectral filters.

physics.optics↗

arXiv2021

Coherent suppression of backscattering in optical microresonators

As light propagates along a waveguide, a fraction of the field can be reflected by Rayleigh scatterers. In high-quality-factor whispering-gallery-mode microresonators, this intrinsic backscattering is primarily caused by either surface or bulk material imperfections. For several types of microresonator-based experiments and applications, minimal backscattering in the cavity is of critical importance, and thus, the ability to suppress backscattering is essential. We demonstrate that the introduction of an additional scatterer into the near field of a high-quality-factor microresonator can coherently suppress the amount of backscattering in the microresonator by more than 30 dB. The method relies on controlling the scatterer position such that the intrinsic and scatterer-induced backpropagating fields destructively interfere. This technique is useful in microresonator applications where backscattering is currently limiting the performance of devices, such as ring-laser gyroscopes and dual frequency combs, which both suffer from injection locking. Moreover, these findings are of interest for integrated photonic circuits in which back reflections could negatively impact the stability of laser sources or other components.

physics.optics↗

arXiv2020

Self-switching Kerr oscillations of counter-propagating light in microresonators

We report the experimental observation of oscillatory antiphase switching between counter-propagating light beams in Kerr ring microresonators, including the emergence of periodic behaviour from a chaotic regime. Self-switching occurs in balanced regimes of operation and is well captured by a simple coupled dynamical system featuring only the self- and cross-phase Kerr nonlinearities. Switching phenomena are due to temporal instabilities of symmetry-broken states combined with attractor merging that restores the broken symmetry on average. Self-switching of counter-propagating light is robust for realising controllable, all-optical generation of waveforms, signal encoding and chaotic cryptography.

physics.optics↗

arXiv2020

Logic Gates based on Interaction of Counterpropagating Light in Microresonators

Optical logic has the potential to replace electronics with photonic circuits in applications for which optic-to-electronic conversion is impractical and for integrated all-optical circuits. Nonlinear optics in whispering gallery mode resonators provides low power, scalable methods to achieve optical logic. We demonstrate, for the first time, an all-optical, universal logic gate using counterpropagating light in which all signals have the same operating optical frequency. Such a device would make possible the routing of optical signals without the need for conversion into the electronic domain, thus reducing latency. The operating principle of the device is based on the Kerr interaction between counter-propagating beams in a whispering gallery mode resonator which induces a splitting between the resonance frequencies for the two propagating directions. Our gate uses a fused silica microrod resonator with a \textit{Q}-factor of $\SI{2e8}{}$. This method of optical logic gives a practical solution to the on-chip routing of light.

physics.optics↗

arXiv2020

Optical memories and switching dynamics of counterpropagating light states in microresonators

The Kerr nonlinearity can be a key enabler for many digital photonic circuits as it allows access to bistable states needed for all-optical memories and switches. A common technique is to use the Kerr shift to control the resonance frequency of a resonator and use it as a bistable, optically-tunable filter. However, this approach works only in a narrow power and frequency range or requires the use of an auxiliary laser. An alternative approach is to use the asymmetric bistability between counterpropagating light states resulting from the interplay between self- and cross-phase modulation, which allows light to enter a ring resonator in just one direction. Logical HIGH and LOW states can be represented and stored as the direction of circulation of light, and controlled by modulating the input power. Here we study the switching speed, operating laser frequency and power range, and contrast ratio of such a device. We reach a bitrate of 2 Mbps in our proof-of-principle device over an optical frequency range of 1 GHz and an operating power range covering more than one order of magnitude. We also calculate that integrated photonic circuits could exhibit bitrates of the order of Gbps, paving the way for the realization of robust and simple all-optical memories, switches, routers and logic gates that can operate at a single laser frequency with no additional electrical power.

physics.optics↗

arXiv2020

A Nonlinear Enhanced Microresonator Gyroscope

We demonstrate a novel optical microresonator gyroscope whose responsivity to rotation is enhanced by a factor of around $10^4$ by operating close to the critical point of a spontaneous symmetry breaking transition between counterpropagating light. We present a proof-of-principle rotation measurement using a resonator with a diameter of 3 mm. In addition, we characterise the dynamical response of the system to a sinusoidally varying rotation, and show this to be well described by a simple theoretical model. We observe the universal critical behaviors of responsivity enhancement and critical slowing down, both of which are beneficial in an optical gyroscope.

physics.optics↗

arXiv2019

Terahertz wave generation using a soliton microcomb

The Terahertz or millimeter wave frequency band (300 GHz - 3 THz) is spectrally located between microwaves and infrared light and has attracted significant interest for applications in broadband wireless communications, space-borne radiometers for Earth remote sensing, astrophysics, and imaging. In particular optically generated THz waves are of high interest for low-noise signal generation. In particular optically generated THz waves are of high interest for low-noise signal generation. Here, we propose and demonstrate stabilized terahertz wave generation using a microresonator-based frequency comb (microcomb). A unitravelling-carrier photodiode (UTC-PD) converts low-noise optical soliton pulses from the microcomb to a terahertz wave at the soliton's repetition rate (331 GHz). With a free-running microcomb, the Allan deviation of the Terahertz signal is 4.5*10^-9 at 1 s measurement time with a phase noise of -72 dBc/Hz (-118 dBc/Hz) at 10 kHz (10 MHz) offset frequency. By locking the repetition rate to an in-house hydrogen maser, in-loop fractional frequency stabilities of 9.6*10^-15 and 1.9*10^-17 are obtained at averaging times of 1 s and 2000 s respectively, limited by the maser reference signal. Moreover, the terahertz signal is successfully used to perform a proof-of-principle demonstration of terahertz imaging of peanuts. Combining the monolithically integrated UTC-PD with an on-chip microcomb, the demonstrated technique could provide a route towards highly stable continuous terahertz wave generation in chip-scale packages for out-of-the-lab applications. In particular, such systems would be useful as compact tools for high-capacity wireless communication, spectroscopy, imaging, remote sensing, and astrophysical applications.

physics.optics↗

arXiv2019

Thermo-optical pulsing in a microresonator filtered fiber-laser: a route towards all-optical control and synchronization

We report on 'slow' pulsing dynamics in a silica resonator-based laser system: by nesting a high-Q rod-resonator inside an amplifying fiber cavity, we demonstrate that trains of microsecond pulses can be generated with repetition rates in the hundreds of kilohertz. We show that such pulses are produced with a period equivalent to several hundreds of laser cavity roundtrips via the interaction between the gain dynamics in the fiber cavity and the thermo-optical effects in the high-Q resonator. Experiments reveal that the pulsing properties can be controlled by adjusting the amplifying fiber cavity parameters. Our results, confirmed by numerical simulations, provide useful insights on the dynamical onset of complex self-organization phenomena in resonator-based laser systems where thermo-optical effects play an active role. In addition, we show how the thermal state of the resonator can be probed and even modified by an external, counter-propagating optical field, thus hinting towards novel approaches for all-optical control and sensing applications.

physics.optics↗

arXiv2018

Universal Symmetry Breaking Dynamics for the Kerr Interaction of Counter-Propagating Light in Dielectric Ring Resonators

Spontaneous symmetry breaking is an important concept in many areas of physics. A fundamentally simple symmetry breaking mechanism in electrodynamics occurs between counter-propagating electromagnetic waves in ring resonators, mediated by the Kerr nonlinearity. The interaction of counter-propagating light in bi-directionally pumped microresonators finds application in the realisation of optical non-reciprocity (for optical diodes), studies of PT-symmetric systems, and the generation of counter-propagating solitons. Here, we present comprehensive analytical and dynamical models for the nonlinear Kerr-interaction of counter-propagating light in a dielectric ring resonator. In particular, we study discontinuous behaviour in the onset of spontaneous symmetry breaking, indicating divergent sensitivity to small external perturbations. These results can be applied to realise, for example, highly sensitive near-field or rotation sensors. We then generalise to a time-dependent model, which predicts new types of dynamical behaviour, including oscillatory regimes that could enable Kerr-nonlinearity-driven all-optical oscillators. The physics of our model can be applied to other systems featuring Kerr-type interaction between two distinct modes, such as for light of opposite circular polarisation in nonlinear resonators, which are commonly described by coupled Lugiato-Lefever equations.

physics.optics↗

arXiv2018

μW-Level Microresonator Solitons with Extended Stability Range Using an Auxiliary Laser

The recent demonstration of dissipative Kerr solitons in microresonators has opened a new pathway for the generation of ultrashort pulses and low-noise frequency combs with gigahertz to terahertz repetition rates, enabling applications in frequency metrology, astronomy, optical coherent communications, and laser-based ranging. A main challenge for soliton generation, in particular in ultra-high-Q resonators, is the sudden change of circulating intracavity power during the onset of soliton generation. This sudden power change requires precise control of the seed laser frequency and power or fast control of the resonator temperature. Here, we report a robust and simple way to increase the stability range of the soliton regime by using an auxiliary laser that passively stabilizes the intracavity power. In our experiments with fused silica resonators, we are able to extend the pump laser frequency stability range of microresonator solitons by two orders of magnitude, which enables soliton generation by slow and manual tuning of the pump laser into resonance and at unprecedented low power levels. Both single- and multi-soliton mode-locked states are generated in a 1.3-mm-diameter fused silica microrod resonator with a free spectral range of ~50.6 GHz, at a 1554 nm pump wavelength at threshold powers <3 mW. Moreover, with a smaller 230-μm-diameter microrod, we demonstrate soliton generation at 780 μW threshold power. The passive enhancement of the stability range of microresonator solitons paves the way for robust and low threshold microcomb systems with substantially relaxed stability requirements for the pump laser source. In addition, this method could be useful in a wider range of microresonator applications that require reduced sensitivity to external perturbations.

physics.optics↗

arXiv2018

Interplay of Polarization and Time-Reversal Symmetry Breaking in Synchronously Pumped Ring Resonators

Optically induced breaking of symmetries plays an important role in nonlinear photonics, with applications ranging from optical switching in integrated photonic circuits to soliton generation in ring lasers. In this work we study for the first time the interplay of two types of spontaneous symmetry breaking that can occur simultaneously in optical ring resonators. Specifically we investigate a ring resonator (e.g. a fiber loop resonator or whispering gallery microresonator) that is synchronously pumped with short pulses of light. In this system we numerically study the interplay and transition between regimes of temporal symmetry breaking (in which pulses in the resonator either run ahead or behind the seed pulses) and polarization symmetry breaking (in which the resonator spontaneously generates elliptically polarized light out of linearly polarized seed pulses). We find ranges of pump parameters for which each symmetry breaking can be independently observed, but also a regime in which a dynamical interplay takes place. Besides the fundamentally interesting physics of the interplay of different types of symmetry breaking, our work contributes to a better understanding of the nonlinear dynamics of optical ring cavities which are of interest for future applications including all-optical logic gates, synchronously pumped optical frequency comb generation, and resonator-based sensor technologies.

physics.optics↗

arXiv2018

Microresonator Isolators and Circulators Based on the Intrinsic Nonreciprocity of the Kerr Effect

Nonreciprocal light propagation is important in many applications, ranging from optical telecommunications to integrated photonics. A simple way to achieve optical nonreciprocity is to use the nonlinear interaction between counterpropagating light in a Kerr medium. Within a ring resonator, this leads to spontaneous symmetry breaking, with the result that light of a given frequency can circulate in one direction, but not in both directions simultaneously. In this work, we demonstrate that this effect can be used to realize optical isolators and circulators based on a single ultra- high-Q microresonator. We obtain isolation of more than 24 dB and develop a theoretical model for the power scaling of the attainable nonreciprocity.

physics.optics↗

arXiv2017

Kerr Superoscillator Model for Microresonator Frequency Combs

Microresonator-based optical frequency combs, or "microcombs", have attracted lots of attention in the last few years thanks to their promising applications in telecommunications, spectroscopy and optical clocks. The process of comb generation in microresonators can be modelled in the frequency domain using coupled mode equations, and has also recently been successfully described in the time domain using a nonlinear Schrödinger equation known as the Lugiato-Lefever equation. Though time-domain approaches have brought many interesting insights for the understanding of microcombs, an intuitive frequency-domain model has not yet been established. In this work we present a frequency-domain model of microcombs that describes the overall structure of the spectra in terms of a few collective excitations of groups of neighboring comb lines, which we term "superoscillators". This approach ties in nicely with the recently-developed time-domain model based on soliton crystals, and links the microcomb generation process with frequency response theory.

physics.optics↗

arXiv2016

Symmetry Breaking of Counter-Propagating Light in a Nonlinear Resonator

Light is generally expected to travel through isotropic media independent of its direction. This makes it challenging to develop non-reciprocal optical elements like optical diodes or circulators, which currently rely on magneto-optical effects and birefringent materials. Here we present measurements of non-reciprocal transmission and spontaneous symmetry breaking between counter-propagating light in dielectric microresonators. The symmetry breaking corresponds to a resonance frequency splitting that allows only one of two counter-propagating (but otherwise identical) light waves to circulate in the resonator. Equivalently, the symmetry breaking can be seen as the collapse of standing waves and transition to travelling waves within the resonator. We present theoretical calculations to show that the symmetry breaking is induced by Kerr-nonlinearity-mediated interaction between the counter-propagating light. This effect is expected to take place in any dielectric ring-resonator and might constitute one of the most fundamental ways to induce optical non-reciprocity. Our findings pave the way for a variety of applications including all optical switching, nonlinear-enhanced rotation sensing, optically controllable circulators and isolators, optical flip-flops for photonic memories as well as exceptionally sensitive power and refractive index sensors.

physics.optics↗