arXiv subjects

Leonardo Midolo

Publications and source records attributed to Leonardo Midolo.

At least 55 records · Page 3Linked to original sources

arXiv2020

Narrow optical linewidths and spin pumping on charge-tunable, close-to-surface self-assembled quantum dots in an ultra-thin diode

We demonstrate full charge control, narrow optical linewidths, and optical spin pumping on single self-assembled InGaAs quantum dots embedded in a $162.5\,\text{nm}$ thin diode structure. The quantum dots are just $88\,\text{nm}$ from the top GaAs surface. We design and realize a p-i-n-i-n diode that allows single-electron charging of the quantum dots at close-to-zero applied bias. In operation, the current flow through the device is extremely small resulting in low noise. In resonance fluorescence, we measure optical linewidths below $2\,μ\text{eV}$, just a factor of two above the transform limit. Clear optical spin pumping is observed in a magnetic field of $0.5\,\text{T}$ in the Faraday geometry. We present this design as ideal for securing the advantages of self-assembled quantum dots -- highly coherent single photon generation, ultra-fast optical spin manipulation -- in the thin diodes required in quantum nano-photonics and nano-phononics applications.

cond-mat.mes-hall↗

arXiv2020

Near Transform-limited Quantum Dot Linewidths in a Broadband Photonic Crystal Waveguide

Planar nanophotonic structures enable broadband, near-unity coupling of emission from quantum dots embedded within, thereby realizing ideal singe-photon sources. The efficiency and coherence of the single-photon source is limited by charge noise, which results in the broadening of the emission spectrum.We report suppression of the noise by fabricating photonic crystal waveguides in a gallium arsenide membrane containing quantum dots embedded in a $p$-$i$-$n$ diode. Local electrical contacts in the vicinity of the waveguides minimize the leakage current and allow fast electrical control ($\approx$4 MHz bandwidth) of the quantum dot resonances. Resonant linewidth measurements of $79$ quantum dots coupled to the photonic crystal waveguides exhibit near transform-limited emission over a 6 nm wide range of emission wavelengths. Importantly, the local electrical contacts allow independent tuning of multiple quantum dots on the same chip, which together with the transform-limited emission are key components in realizing multiemitter-based quantum information processing.

quant-ph↗

arXiv2020

Scalable integrated single-photon source

Photonic qubits are key enablers for quantum-information processing deployable across a distributed quantum network. An on-demand and truly scalable source of indistinguishable single photons is the essential component enabling high-fidelity photonic quantum operations. A main challenge is to overcome noise and decoherence processes in order to reach the steep benchmarks on generation efficiency and photon indistinguishability required for scaling up the source. We report on the realization of a deterministic single-photon source featuring near-unity indistinguishability using a quantum dot in an 'on-chip' planar nanophotonic waveguide circuit. The device produces long strings of $>100$ single photons without any observable decrease in the mutual indistinguishability between photons. A total generation rate of $122$ million photons per second is achieved corresponding to an 'on-chip' source efficiency of $84 \%$. These specifications of the single-photon source are benchmarked for boson sampling and found to enable scaling into the regime of quantum advantage.

quant-ph↗

arXiv2020

On-chip deterministic operation of quantum dots in dual-mode waveguides for a plug-and-play single-photon source

A deterministic source of coherent single photons is an enabling device of quantum-information processing for quantum simulators, and ultimately a full-fledged quantum internet. Quantum dots (QDs) in nanophotonic structures have been employed as excellent sources of single photons, and planar waveguides are well suited for scaling up to multiple photons and emitters exploring near-unity photon-emitter coupling and advanced active on-chip functionalities. An ideal single-photon source requires suppressing noise and decoherence, which notably has been demonstrated in electrically-contacted heterostructures. It remains a challenge to implement deterministic resonant excitation of the QD required for generating coherent single photons, since residual light from the excitation laser should be suppressed without compromising source efficiency and scalability. Here, we present the design and realization of a novel planar nanophotonic device that enables deterministic pulsed resonant excitation of QDs through the waveguide. Through nanostructure engineering, the excitation light and collected photons are guided in two orthogonal waveguide modes enabling deterministic operation. We demonstrate a coherent single-photon source that simultaneously achieves high-purity ($g^{(2)}(0)$ = 0.020 $\pm$ 0.005), high-indistinguishability ($V$ = 96 $\pm$ 2 %), and $>$80 % coupling efficiency into the waveguide. The novel `plug-and-play' coherent single-photon source could be operated unmanned for several days and will find immediate applications, e.g., for constructing heralded multi-photon entanglement sources for photonic quantum computing or sensing.

quant-ph↗

arXiv2019

On-chip nanomechanical filtering of quantum-dot single-photon sources

Semiconductor quantum dots in photonic integrated circuits enable scaling quantum-information processing to many single photons and quantum-optical gates. On-chip spectral filters are essential to achieve high-purity and coherent photon emission from quantum dots embedded in waveguides, without resorting to free-space optics. Such spectral filters should be tunable, to compensate for the inhomogeneous spectral distribution of the quantum dots transitions. Here, we report an on-chip filter monolithically integrated with quantum dots, that uses nanomechanical motion for tuning its resonant wavelength over 10 nm, enabling operation at cryogenic temperatures and avoiding cross-talk with the emitter. We demonstrate single-photon emission from a quantum dot under non-resonant excitation by employing only the on-chip filter. These results are key for the development of fully-integrated de-multiplexing, multi-path photon encoding schemes, and multi-emitter circuits.

physics.app-ph↗

arXiv2019

Suspended Spot-Size Converters for Scalable Single-Photon Devices

We report on the realization of a highly efficient optical spot-size converter for the end-face coupling of single photons from GaAs-based nanophotonic waveguides with embedded quantum dots. The converter is realized using an inverted taper and an epoxy polymer overlay providing a 1.3~$μ$m output mode field diameter. We demonstrate the collection of single photons from a quantum dot into a lensed fiber with a rate of 5.84$\pm0.01$~MHz and estimate a chip-to-fiber coupling efficiency of $\sim48$~\%. The stability and compatibility with cryogenic temperatures make the epoxy waveguides a promising material to realize efficient and scalable interconnects between heterogeneous quantum photonic integrated circuits.

physics.app-ph↗

arXiv2018

Nanomechanical single-photon routing

The merger between integrated photonics and quantum optics promises new opportunities within photonic quantum technology with the very significant progress on excellent photon-emitter interfaces and advanced optical circuits. A key missing functionality is rapid circuitry reconfigurability that ultimately does not introduce loss or emitter decoherence, and operating at a speed matching the photon generation and quantum memory storage time of the on-chip quantum emitter. This ambitious goal requires entirely new active quantum-photonic devices by extending the traditional approaches to reconfigurability. Here, by merging nano-optomechanics and deterministic photon-emitter interfaces we demonstrate on-chip single-photon routing with low loss, small device footprint, and an intrinsic time response approaching the spin coherence time of solid-state quantum emitters. The device is an essential building block for constructing advanced quantum photonic architectures on-chip, towards, e.g., coherent multi-photon sources, deterministic photon-photon quantum gates, quantum repeater nodes, or scalable quantum networks.

physics.app-ph↗

arXiv2018

Coherent optical control of a quantum-dot spin-qubit in a waveguide-based spin-photon interface

Waveguide-based spin-photon interfaces on the GaAs platform have emerged as a promising system for a variety of quantum information applications directly integrated into planar photonic circuits. The coherent control of spin states in a quantum dot can be achieved by applying circularly polarized laser pulses that may be coupled into the planar waveguide vertically through radiation modes. However, proper control of the laser polarization is challenging since the polarization is modified through the transformation from the far field to the exact position of the quantum dot in the nanostructure. Here we demonstrate polarization-controlled excitation of a quantum-dot electron spin and use that to perform coherent control in a Ramsey interferometry experiment. The Ramsey interference reveals a pure dephasing time of $ 2.2\pm0.1 $ ns, which is comparable to the values so far only obtained in bulk media. We analyze the experimental limitations in spin initialization fidelity and Ramsey contrast and identify the underlying mechanisms.

quant-ph↗

arXiv2018

High-Efficiency Shallow-Etched Grating on GaAs Membranes for Quantum Photonic Applications

We have designed and fabricated a shallow-etched grating on gallium arsenide nanomembranes for efficient chip-to-fiber coupling in quantum photonic integrated circuits. Experimental results show that the grating provides a fiber-coupling efficiency of >60 %, a greatly suppressed back reflection of <1 % for the designed wavelength of 930 nm, and a 3-dB bandwidth of >43 nm. Highly efficient single-photon collection from embedded indium arsenide quantum dots to an optical fiber was realized with the designed grating, showing an average sixfold increase in photon count compared to commonly used circular gratings, offering an efficient interface for on-chip quantum information processing.

physics.app-ph↗

arXiv2018

Suppressing phonon decoherence of high performance single-photon sources in nanophotonic waveguides

The fundamental process limiting the coherence of quantum-dot based single-photon sources is the interaction with phonons. We study the effect of phonon decoherence on the indistinguishability of single photons emitted from a quantum dot embedded in a suspended nanobeam waveguide. At low temperatures, the indistinguishability is limited by the coupling between the quantum dot and the fundamental vibrational modes of the waveguide and is sensitive to the quantum-dot position within the nanobeam cross-section. We show that this decoherence channel can be efficiently suppressed by clamping the waveguide with a low refractive index cladding material deposited on the waveguide. With only a few microns of cladding material, the coherence of the emitted single photons is drastically improved. We show that the degree of indistinguishability can reach near unity and become independent of the quantum-dot position. We finally show that the cladding material may serve dual purposes since it can also be applied as a means to efficiently outcouple single photons from the nanophotonic waveguide into an optical fiber. Our proposal paves the way for a highly efficient fiber-coupled source of indistinguishable single photons based on a planar nanophotonic platform.

physics.app-ph↗

arXiv2018

Nano-Opto-Electro-Mechanical Systems

A new class of hybrid systems that couple optical, electrical and mechanical degrees of freedom in nanoscale devices is under development in laboratories worldwide. These nano-opto-electro-mechanical systems (NOEMS) offer unprecedented opportunities to dynamically control the flow of light in nanophotonic structures, at high speed and low power consumption. Drawing on conceptual and technological advances from cavity optomechanics, they also bear the potential for highly efficient, low-noise transducers between microwave and optical signals, both in the classical and quantum domains. This Progress Article discusses the fundamental physical limits of NOEMS, reviews the recent progress in their implementation, and suggests potential avenues for further developments in this field.

physics.optics↗

arXiv2018

Quantum optics with near lifetime-limited quantum-dot transitions in a nanophotonic waveguide

Establishing a highly efficient photon-emitter interface where the intrinsic linewidth broadening is limited solely by spontaneous emission is a key step in quantum optics. It opens a pathway to coherent light-matter interaction for, e.g., the generation of highly indistinguishable photons, few-photon optical nonlinearities, and photon-emitter quantum gates. However, residual broadening mechanisms are ubiquitous and need to be combated. For solid-state emitters charge and nuclear spin noise is of importance and the influence of photonic nanostructures on the broadening has not been clarified. We present near lifetime-limited linewidths for quantum dots embedded in nanophotonic waveguides through a resonant transmission experiment. It is found that the scattering of single photons from the quantum dot can be obtained with an extinction of $66 \pm 4 \%$, which is limited by the coupling of the quantum dot to the nanostructure rather than the linewidth broadening. This is obtained by embedding the quantum dot in an electrically-contacted nanophotonic membrane. A clear pathway to obtaining even larger single-photon extinction is laid out, i.e., the approach enables a fully deterministic and coherent photon-emitter interface in the solid state that is operated at optical frequencies.

quant-ph↗

arXiv2017

Indistinguishable and efficient single photons from a quantum dot in a planar nanobeam waveguide

We demonstrate a high-purity source of indistinguishable single photons using a quantum dot embedded in a nanophotonic waveguide. The source features a near-unity internal coupling efficiency and the collected photons are efficiently coupled off-chip by implementing a taper that adiabatically couples the photons to an optical fiber. By quasi-resonant excitation of the quantum dot, we measure a single-photon purity larger than 99.4% and a photon indistinguishability of up to 94+-1% by using p-shell excitation combined with spectral filtering to reduce photon jitter. A temperature-dependent study allows pinpointing the residual decoherence processes notably the effect of phonon broadening. Strict resonant excitation is implemented as well as another mean of suppressing photon jitter, and the additional complexity of suppressing the excitation laser source is addressed. The study opens a clear pathway towards the long-standing goal of a fully deterministic source of indistinguishable photons, which is integrated on a planar photonic chip.

quant-ph↗

arXiv2017

Spin-photon interface and spin-controlled photon switching in a nanobeam waveguide

Access to the electron spin is at the heart of many protocols for integrated and distributed quantum-information processing [1-4]. For instance, interfacing the spin-state of an electron and a photon can be utilized to perform quantum gates between photons [2,5] or to entangle remote spin states [6-9]. Ultimately, a quantum network of entangled spins constitutes a new paradigm in quantum optics [1]. Towards this goal, an integrated spin-photon interface would be a major leap forward. Here we demonstrate an efficient and optically programmable interface between the spin of an electron in a quantum dot and photons in a nanophotonic waveguide. The spin can be deterministically prepared with a fidelity of 96\%. Subsequently the system is used to implement a "single-spin photonic switch", where the spin state of the electron directs the flow of photons through the waveguide. The spin-photon interface may enable on-chip photon-photon gates [2], single-photon transistors [10], and efficient photonic cluster state generation [11].

quant-ph↗

arXiv2017

Electro-optic routing of photons from single quantum dots in photonic integrated circuits

Recent breakthroughs in solid-state photonic quantum technologies enable generating and detecting single photons with near-unity efficiency as required for a range of photonic quantum technologies. The lack of methods to simultaneously generate and control photons within the same chip, however, has formed a main obstacle to achieving efficient multi-qubit gates and to harness the advantages of chip-scale quantum photonics. Here we propose and demonstrate an integrated voltage-controlled phase shifter based on the electro-optic effect in suspended photonic waveguides with embedded quantum emitters. The phase control allows building a compact Mach-Zehnder interferometer with two orthogonal arms, taking advantage of the anisotropic electro-optic response in gallium arsenide. Photons emitted by single self-assembled quantum dots can be actively routed into the two outputs of the interferometer. These results, together with the observed sub-microsecond response time, constitute a significant step towards chip-scale single-photon-source de-multiplexing, fiber-loop boson sampling, and linear optical quantum computing.

quant-ph↗

arXiv2016

Efficient fiber-coupled single-photon source based on quantum dots in a photonic-crystal waveguide

Many photonic quantum information processing applications would benefit from a high brightness, fiber-coupled source of triggered single photons. Here, we present a fiber-coupled photonic-crystal waveguide single-photon source relying on evanescent coupling of the light field from a tapered out-coupler to an optical fiber. A two-step approach is taken where the performance of the tapered out-coupler is recorded first on an independent device containing an on-chip reflector. Reflection measurements establish that the chip-to-fiber coupling efficiency exceeds 80 %. The detailed characterization of a high-efficiency photonic-crystal waveguide extended with a tapered out-coupling section is then performed. The corresponding overall single-photon source efficiency is 10.9 % $\pm$ 2.3 %, which quantifies the success probability to prepare an exciton in the quantum dot, couple it out as a photon in the waveguide, and subsequently transfer it to the fiber. The applied out-coupling method is robust, stable over time, and broadband over several tens of nanometers, which makes it a highly promising pathway to increase the efficiency and reliability of planar chip-based single-photon sources.

quant-ph↗

arXiv2016

Deterministic Single-Phonon Source Triggered by a Single Photon

We propose a scheme that enables the deterministic generation of single phonons at GHz frequencies triggered by single photons in the near infrared. This process is mediated by a quantum dot embedded on-chip in an opto-mechanical circuit, which allows for the simultaneous control of the relevant photonic and phononic frequencies. We devise new opto-mechanical circuit elements that constitute the necessary building blocks for the proposed scheme and are readily implementable within the current state-of-the-art of nano-fabrication. This will open new avenues for implementing quantum functionalities based on phonons as an on-chip quantum bus.

quant-ph↗

arXiv2015

Soft-mask fabrication of gallium arsenide nanomembranes for integrated quantum photonics

We report on the fabrication of quantum photonic integrated circuits based on suspended GaAs membranes. The fabrication process consists of a single lithographic step followed by inductively-coupled-plasma dry etching through an electron-beam-resist mask and wet etching of a sacrificial layer. This method does not require depositing, etching, and stripping a hard mask, greatly reducing fabrication time and costs, while at the same time yielding devices of excellent structural quality. We discuss in detail the procedures for cleaning the resist residues caused by the plasma etching and present a statistical analysis of the etched feature size after each fabrication step.

physics.optics↗